Items where Department is "Engineering" and Year is 2011

Journal Article

UNSPECIFIED (2011) Advanced Suspension Systems and Dynamics for Future Road Vehicles. Vehicle System Dynamics, 49 (1-2). pp. 1-418. ISSN 0042-3114

UNSPECIFIED (2011) Advanced vehicle handling dynamics and control. International Journal of Vehicle Design, 56 (1-4). pp. 1-366. ISSN 0143-3369

Abujnah, N. and Letizia, R. and Obayya, S. S. A. (2011) Design considerations of microcavity ring resonators. IET Optoelectronics, 5 (4). pp. 158-164. ISSN 1751-8768

Adamopoulos, George and Bashir, Aneeqa and Gillin, William P. and Georgakopoulos, Stamatis and Shkunov, Maxim and Baklar, Mohamed A. and Stingelin, Natalie and Bradley, Donal D. C. and Anthopoulos, Thomas D. (2011) Structural and Electrical Characterization of ZnO Films Grown by Spray Pyrolysis and Their Application in Thin-Film Transistors. Advanced Functional Materials, 21 (3). pp. 525-531. ISSN 1616-301X

Adamopoulos, George and Thomas, Stuart and Bradley, Donal D. C. and McLachlan, Martyn A. and Anthopoulos, Thomas D. (2011) Low-voltage ZnO thin-film transistors based on Y2O3 and Al2O3 high-k dielectrics deposited by spray pyrolysis in air. Applied Physics Letters, 98 (12): 123503. -. ISSN 0003-6951

Adamopoulos, George and Thomas, Stuart and Woebkenberg, Paul H. and Bradley, Donal D. C. and McLachlan, Martyn A. and Anthopoulos, Thomas D. (2011) High-Mobility Low-Voltage ZnO and Li-Doped ZnO Transistors Based on ZrO2 High-k Dielectric Grown by Spray Pyrolysis in Ambient Air. Advanced Materials, 23 (16). pp. 1894-1898. ISSN 0935-9648

Adams, Jamie and Mellor, Matthew and Joyce, Malcolm (2011) The determination of the depth of localised radioactive contamination by 137Cs and 60Co in sand with principal component analysis. Environmental Science and Technology, 45 (19). pp. 8262-8267. ISSN 0013-936X

Adebisi, Bamidele and Treytl, A and Haidine, A and Portnoy, A and Shan, Rafi and Lund, Deborah and Pille, H and Honary, Bahram (2011) IP-Centric High Rate Narrowband PLC for Smart Grid Applications. IEEE Communications Magazine, 49 (12). pp. 46-54. ISSN 0163-6804

Ahsan, M. Naveed and Bradley, Robert and Pinkerton, Andrew J. (2011) Microcomputed tomography analysis of intralayer porosity generation in laser direct metal deposition and its causes. Journal of Laser Applications, 23 (2): 022009. -. ISSN 1042-346X

Ahsan, M. Naveed and Paul, Christ P. and Kukreja, L. M. and Pinkerton, Andrew J. (2011) Porous structures fabrication by continuous and pulsed laser metal deposition for biomedical applications; modelling and experimental investigation. Journal of Materials Processing Technology, 211 (4). pp. 602-609. ISSN 0924-0136

Ahsan, M. Naveed and Pinkerton, Andrew J. (2011) An analytical-numerical model of laser direct metal deposition track and microstructure formation. Modelling and Simulation in Materials Science and Engineering, 19 (5): 055003. -. ISSN 0965-0393

Ahsan, M. Naveed and Pinkerton, Andrew J. and Moat, Richard J. and Shackleton, Judith (2011) A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti-6Al-4V powders. Materials Science and Engineering: A, 528 (25-26). pp. 7648-7657. ISSN 0921-5093

Aiouache, Farid and tSaoir, Meabh Nic An and Kitagawa, Kuniyuki (2011) Screening wall effects of a thin fluidized bed by near-infrared imaging. Chemical Engineering Journal, 167 (1). pp. 288-296. ISSN 1385-8947

Akurugoda Gamage, Kelum and Joyce, Malcolm (2011) An analytical approach to gamma-ray self-shielding effects for radioactive bodies encountered nuclear decommissioning scenarios. Applied Radiation and Isotopes, 69 (10). pp. 1521-1532. ISSN 0969-8043

Al-Gayem, Qais and Honguan, Liu and Richardson, Andrew and Burd, Nick (2011) Test strategies for electrode degradation in bio-fluidic microsystems. Journal of Electronic Testing, 27 (1). pp. 57-68. ISSN 0923-8174

Al-Gayem, Qais and Richardson, Andrew and Liu, Hongyuan and Burd, Nick (2011) An oscillation-based technique for degradation monitoring of sensing and actuation electrodes within microfluidic systems. Journal of Electronic Testing, 27 (3). pp. 375-387. ISSN 0923-8174

Ali, M.N. and Rehman, I.U. (2011) An Auxetic structure configured as oesophageal stent with potential to be used for palliative treatment of oesophageal cancer; Development and in vitro mechanical analysis. Journal of Materials Science: Materials in Medicine, 22 (11). pp. 2573-2581. ISSN 0957-4530

Ambattu, P. K. and Burt, G. and Khan, V. and Jones, R. M. and Dexter, A. C. and Dolgashev, V. (2011) Analysis and control of wakefields in X-band crab cavities for Compact Linear Collider. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 657 (1). pp. 27-37.

Amorim, C. and Wang, Xiaodong and Keane, M. A. (2011) Application of hydrodechlorination in environmental pollution control: Comparison of the performance of supported and unsupported Pd and Ni catalysts. Chinese Journal of Catalysis, 32 (5). pp. 746-755.

Anthony, C. J. and Torricelli, G. and Prewett, P. D. and Cheneler, D. and Binns, C. and Sabouri, A. (2011) Effect of focused ion beam milling on microcantilever loss. Journal of Micromechanics and Microengineering, 21 (4): 045031. ISSN 0960-1317

Appleby, Michaela and Lambert, Christopher and Rennie, Allan and Buckley, Adam (2011) An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs). International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME), 1 (2). pp. 1-18. ISSN 2156-1680

Barrow, A. T.W. and Rivera-Díaz-Del-Castillo, P. E.J. (2011) Nanoprecipitation in bearing steels. Acta Materialia, 59 (19). pp. 7155-7167. ISSN 1359-6454

Bimbo, Nuno and Ting, Valeska P. and Hruzewicz-Kolodziejczyk, Anna and Mays, Timothy J. (2011) Analysis of hydrogen storage in nanoporous materials for low carbon energy applications. Faraday Discussions, 151 (1-2). pp. 59-74. ISSN 1359-6640

Bowen, James and Cheneler, David and Andrews, James W. and Avery, Andrew R. and Zhang, Zhibing and Ward, Michael C. L. and Adams, Michael J. (2011) Application of colloid probe atomic force microscopy to the adhesion of thin films of viscous and viscoelastic silicone fluids. Langmuir, 27 (18). pp. 11489-11500. ISSN 0743-7463

Burt, Graeme and Dexter, Amos (2011) Prediction of multipactor in the iris region of rf deflecting mode cavities. Physical Review Special Topics: Accelerators and Beams, 14 (12): 122002. ISSN 1098-4402

Cai, Xiao Xiao and Platt, S. P. (2011) Modeling neutron interactions and charge collection in the Imaging Single-Event Effects Monitor. IEEE Transactions on Nuclear Science, 58 (3). pp. 910-915. ISSN 0018-9499

Cai, Xiao Xiao and Platt, Simon and Monk, Stephen David (2011) Design of a Detector for Characterizing Neutron Fields for Single-Event Effects Testing. IEEE Transactions on Nuclear Science, 58 (3 Part). pp. 1123-1128. ISSN 0018-9499

Calixto, Filipe and Fernandes, Joao and Couto, Ricardo and Hernandez, Elvis J. and Najdanovic-Visak, Vesna and Simoes, Pedro C. and Najdanovic-Visak, Vesna (2011) Synthesis of fatty acid methyl esters via direct transesterification with methanol/carbon dioxide mixtures from spent coffee grounds feedstock. Green Chemistry, 13 (5). pp. 1196-1202. ISSN 1463-9262

Campobasso, Sergio and Baba-Ahmadi, Mohammad (2011) Ad-hoc Boundary Conditions for CFD Analyses of Turbomachinery Problems with Strong Flow Gradients at Farfield Boundaries. Journal of Turbomachinery, 133 (4): 041010. ISSN 1528-8900

Cao, Dongpu and Khajepour, Amir and Song, Xubin (2011) Modelling generalisation and power dissipation of flexible-wheel suspension concept for planetary surface vehicles. Vehicle System Dynamics, 49 (8). pp. 1299-1320. ISSN 0042-3114

Cao, Dongpu and Rakheja, Subhash and Sandu, Corina (2011) Interdisciplinary aspects of vehicle system dynamics integration. Mechanical Systems and Signal Processing, 25 (6). pp. 1877-2038. ISSN 0888-3270

Cao, Dongpu and Rakheja, Subhash and Sandu, Corina (2011) Special issue on interdisciplinary aspects of vehicle system dynamics integration. Mechanical Systems and Signal Processing, 25 (8). pp. 3213-3215. ISSN 0888-3270

Cao, Dongpu and Rakheja, Subhash and Wang, Zhanqi (2011) Urban bus driver ride and road-friendliness. Part II: subjective suspension damping tuning and objective optimization. International Journal of Vehicle Design, 57 (4). pp. 333-358. ISSN 0143-3369

Cao, Dongpu and Rakheja, Subhash and Yang, Xiaobo (2011) Special issue on advanced vehicle handling dynamics and control. International Journal of Vehicle Design, 56 (1-4). pp. 1-3. ISSN 0143-3369

Cao, Dongpu and Song, Xubin and Ahmadian, Mehdi (2011) Editors' perspectives: road vehicle suspension design, dynamics, and control. Vehicle System Dynamics, 49 (1-2). pp. 3-28. ISSN 0042-3114

Carter, Richard (2011) Erratum to : Acceleration technologies for charged particles: An introduction (Contemporary Physics, (2011), 52, 1, (15-41)). Contemporary Physics, 52 (3). p. 263. ISSN 0010-7514

Carter, Richard (2011) Synthesis of the fields of barrel open resonators. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 657 (1). pp. 1-5. ISSN 0168-9002

Carter, Richard G. (2011) Acceleration technologies for charged particles : An introduction. Contemporary Physics, 52 (1). pp. 15-41. ISSN 0010-7514

Celik, H Kursat and Rennie, Allan and Akinci, Ibrahim (2011) Deformation behaviour simulation of an apple under drop case by finite element method. Journal of Food Engineering, 104 (2). pp. 293-298. ISSN 0260-8774

Celik, Kursat and Karayel, Davut and Caglayan, Nuri and Rennie, Allan and Akinci, Ibrahim (2011) Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Case study for a sample in-line drip emitter : The paper is to study CFD and RP application samples on the design issues associated with agricultural irrigation equipment. Virtual and Physical Prototyping, 6 (1). pp. 47-56. ISSN 1745-2759

Celik, Kursat and Rennie, Allan and Karayel, Davut and Akinci, Ibrahim (2011) Determination of flow parameters through CFD analysis for agricultural irrigation equipment : a case study for a mini valve. Journal of Agricultural Machinery Science, 7 (3). pp. 231-239. ISSN 1306-0007

Chaudhry, A.A. and Yan, H. and Gong, K. and Inam, F. and Viola, G. and Reece, M.J. and Goodall, J.B.M. and Ur Rehman, I. and McNeil-Watson, F.K. and Corbett, J.C.W. and Knowles, J.C. and Darr, J.A. (2011) High-strength nanograined and translucent hydroxyapatite monoliths via continuous hydrothermal synthesis and optimized spark plasma sintering. Acta Biomaterialia, 7 (2). pp. 791-799. ISSN 1742-7061

Chen, Hui-Chi and Pinkerton, Andrew J. and Li, Lin (2011) Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications. International Journal of Advanced Manufacturing Technology, 52 (9-12). pp. 977-987. ISSN 0268-3768

Chen, Hui-Chi and Pinkerton, Andrew J. and Li, Lin and Liu, Zhu and Mistry, Anil T. (2011) Gap-free fibre laser welding of Zn-coated steel on Al alloy for light-weight automotive applications. Materials and Design, 32 (2). pp. 495-504. ISSN 0261-3069

Cheneler, D. and Bowen, J. and Leigh, S. J. and Purssell, C. P. and Billson, D. R. and Hutchins, D. A. and Ward, M. C. L. (2011) Fabrication and analysis of cylindrical resin AFM microcantilevers. Ultramicroscopy, 111 (8). pp. 1214-1223. ISSN 0304-3991

Cheneler, D. and Teng, J. and Adams, M. and Anthony, C. J. and Carter, E. L. and Ward, M. (2011) Printed circuit board as a MEMS platform for focused ion beam technology. Microelectronic Engineering, 88 (1). pp. 121-126. ISSN 0167-9317

Cheneler, David and Bowen, James and Evans, Stephen D. and Górzny, Marcin and Adams, Michael J. and Ward, Michael C. L. (2011) Characteristics and durability of fluoropolymer thin films. Polymer Degradation and Stability, 96 (4). pp. 561-565. ISSN 0141-3910

Cheneler, David and Bowen, James and Ward, Michael C. L. and Adams, M. J. (2011) Principles of a micro squeeze flow rheometer for the analysis of extremely small volumes of liquid. Journal of Micromechanics and Microengineering, 21 (4): 045030. ISSN 0960-1317

Cheneler, David and Bowen, James and Ward, Michael C. L. and Adams, Michael J. (2011) Micro squeeze flow rheometer for high frequency analysis of nano-litre volumes of viscoelastic fluid. Microelectronic Engineering, 88 (8). pp. 1726-1729. ISSN 0167-9317

Dar, A. A. and Umar, K. and Mir, N. A. and Haque, M. M. and Muneer, M. and Boxall, C. (2011) Photocatalysed degradation of a herbicide derivative, Dinoterb, in aqueous suspension. Research on Chemical Intermediates, 37 (6). pp. 567-578. ISSN 0922-6168

Degl'Innocenti, Riccardo and Zanotto, S. and Tredicucci, A. and Biasiol, G. and Sorba, L. (2011) One-dimensional surface-plasmon gratings for the excitation of intersubband polaritons in suspended membranes. Solid State Communications, 151 (23). pp. 1725-1727. ISSN 0038-1098

Derbali, J. and AbdelMalek, F. and Obayya, S. S. A. and Bouchriha, H. and Letizia, R. (2011) Design of a compact photonic crystal sensor. Optical and Quantum Electronics, 42 (8). pp. 463-472. ISSN 0306-8919

Dexter, A. C. and Burt, G. and Carter, R. and Tahir, I. and Wang, H. and Davis, K. and Rimmer, R. (2011) First demonstration and performance of an injection locked CW magnetron to phase control a superconducting cavity. Physical Review Special Topics: Accelerators and Beams, 14 (3). 032001. ISSN 1098-4402

Dexter, Amos and Burt, Graeme and Ambattu, Praveen K. and Dolgashev, V. and Jones, R. (2011) CLIC crab cavity design optimisation for maximum luminosity. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 657 (1). pp. 45-51. ISSN 0168-9002

Du, Yanping and Qu, Z. and Xu, H.-J. and Liu, Z.-Y. and Zhao, C.Y. and Tao, W.Q. (2011) Numerical simulation of film condensation on vertical plate embedded in metallic foams. Progress in Computational Fluid Dynamics, 11 (3-4). pp. 198-205.

Gamage, K.A.A. and Joyce, Malcolm and Hawkes, N. P. (2011) A comparison of four different digital algorithms for pulse-shape discrimination in fast scintillators. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 642 (1). pp. 78-83. ISSN 0168-9002

Gamage, Kelum and Joyce, M. J. and Adams, Jamie (2011) Combined digital imaging of mixed-field radioactivity with a single detector. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 635 (1). pp. 74-77. ISSN 0168-9002

Garnsey, Richard and Nickson, Ian and Joyce, Malcolm (2011) Lessons learnt from recent nuclear build projects. Proceedings of the ICE - Energy, 164 (2). pp. 57-70. ISSN 1751-4223

Grozdanic, Nikola D. and Najdanovic, Vesna and Kijevcanin, Mirjana Lj. and Serbanovic, Slobodan P. and da Ponte, Manuel Nunes and Visak, Zoran P. (2011) Liquid-liquid phase equilibria in nicotine (aqueous) solutions. Fluid Phase Equilibria, 310 (1-2). pp. 198-206. ISSN 0378-3812

Gu, Jun and Feng, Zhi-hua and Ma, Xiandong and Ni, Jun-fang (2011) Proportional-integral-plus control of robotic excavator arm utilising state-dependent parameter model. Applied Mechanics and Materials, 48-49. pp. 1323-1327. ISSN 1660-9336

Gupta, G. and Kumar, M. and Chattopadhyay, C. and Mondal, K. (2011) Corrosion and Oxidation Behavior of Zr58Cu22Fe4Co4Al12 Metallic Glass. Trans Indian Inst Met, 64. 401–408.

Hernandez, Elvis J. and Luna, Pilar and Stateva, Roumiana P. and Najdanovic, Vesna and Reglero, Guillermo and Fornari, Tiziana (2011) Liquid-liquid phase transition of mixtures comprising squalene, olive oil, and ethyl lactate : application to recover squalene from oil deodorizer distillates. Journal of Chemical and Engineering Data, 56 (5). pp. 2148-2152. ISSN 0021-9568

Hou, Xiaonan and Acar, Memis and Silberschmidt, Vadim (2011) Finite element simulation of low-density thermally bonded nonwoven materials : effects of orientation distribution function and arrangement of bond points. Computational Materials Science, 50 (4). 1292–1298. ISSN 0927-0256

Hou, Xiaonan and Acar, Memis and Silberschmidt, Vadim (2011) Non-uniformity of deformation in low-density thermally point bonded non-woven material : effect of microstructure. Journal of Materials Science, 46 (2). 307–315. ISSN 0022-2461

Hou, Xiaonan and Hu, Hong and Liu, Yanping and Silberschmidt, Vadim (2011) Nonlinear compression behavior of warp-knitted spacer fabric : effect of sandwich structure. Computers, Materials & Continua, 23 (2). pp. 119-134. ISSN 1546-2218

Huang, Mingxin and Perlade, Astrid and Rivera-Diaz-Del-Castillo, Pedro E J (2011) Predicting the evolution of dislocation density following hot deformation. Philosophical Magazine Letters, 91 (6). pp. 387-393. ISSN 0950-0839

Ibarra-Medina, J. and Pinkerton, A. J. (2011) Numerical investigation of powder heating in coaxial laser metal deposition. Surface Engineering, 27 (10). pp. 754-761. ISSN 0267-0844

Jackson, Adrian and Campobasso, Sergio (2011) Shared-memory, distributed-memory, and mixed-mode parallelisation of a CFD simulation code. Computer Science - Research and Development, 26 (3-4). pp. 187-195. ISSN 1865-2042

Jagus, Krzysztof and Jiang, Xi (2011) Large Eddy Simulation of Diesel Fuel Injection and Mixing in a HSDI Engine. Flow, Turbulence and Combustion, 87 (2-3). pp. 473-491. ISSN 1386-6184

Jiang, Xi (2011) A review of physical modelling and numerical simulation of long-term geological storage of CO2. Applied Energy, 88 (11). pp. 3557-3566. ISSN 0306-2619

Jiang, Xi and Luo, K. H. and de Goey, L. P. H. and Bastiaans, R. J. M. and van Oijen, J. A. (2011) Swirling and impinging effects in an annular nonpremixed jet flame. Flow, Turbulence and Combustion, 86 (1). pp. 63-88. ISSN 1386-6184

Lin, Hungyen and Fumeaux, Christophe and Ung, B. S. Y. and Abbott, Derek (2011) Comprehensive modeling of THz microscope with a sub-wavelength source. Optics Express, 19 (6). pp. 5327-5338. ISSN 1094-4087

M'Guil, S. and Wen, W. and Ahzi, S. and Gracio, J.J. (2011) Modeling of large plastic deformation behavior and anisotropy evolution in cold rolled bcc steels using the viscoplastic φ-model-based grain-interaction. Materials Science and Engineering: A, 528 (18). pp. 5840-5853. ISSN 0921-5093

Mahmood, Khalid and Syed, Waheed Ul Haq and Pinkerton, Andrew J. (2011) Innovative reconsolidation of carbon steel machining swarf by laser metal deposition. Optics and Lasers in Engineering, 49 (2). pp. 240-247. ISSN 0143-8166

Manic, Marina S. and Najdanovic, Vesna and da Ponte, Manuel Nunes and Visak, Zoran P. (2011) Extraction of free fatty acids from soybean oil using ionic liquids or poly(ethyleneglycol)s. AIChE Journal, 57 (5). pp. 1344-1355. ISSN 0001-1541

Manic, Marina S. and da Ponte, Manuel Nunes and Najdanovic, Vesna (2011) Recovery of erythromycin from aqueous solutions with an ionic liquid and high-pressure carbon dioxide. Chemical Engineering Journal, 171 (3). pp. 904-911. ISSN 1385-8947

Metje, Nicole and Chapman, David N. and Cheneler, David and Ward, Michael and Thomas, Andrew M. (2011) Smart pipes-instrumented water pipes, can this be made a reality? Sensors, 11 (8). pp. 7455-7475. ISSN 1424-8220

Moat, R. J. and Pinkerton, A. J. and Li, L. and Withers, P. J. and Preuss, M. (2011) Residual stresses in laser direct metal deposited Waspaloy. Materials Science and Engineering: A, 528 (6). pp. 2288-2298. ISSN 0921-5093

Monk, Stephen and Selwood, Mark (2011) A Monte Carlo simulation of monoenergetic neutrons traversing rectangular and spherical polyethylene moderators. Radiation Protection Dosimetry, 144 (1-4). pp. 182-186. ISSN 1742-3406

Montazeri, Allahyar and Poshtan, Javad (2011) A new adaptive recursive RLS-based fast-array IIR filter for active noise and vibration control systems. Signal Processing, 91 (1). pp. 98-113. ISSN 0165-1684

Montazeri, Allahyar and Poshtan, Javad and Yousefi-Koma, Aghil (2011) Design and analysis of robust minimax LQG controller for an experimental beam considering spill-over effect. IEEE Transactions on Control Systems Technology, 19 (5). pp. 1251-1259. ISSN 1063-6536

Morioka, A. and Miyoshi, Y. and Tsuchiya, F. and Misawa, H. and Kasaba, Y. and Asozu, T. and Okano, S. and Kadokura, A. and Sato, N. and Miyaoka, H. and Yumoto, K. and Parks, G.K. and Honary, F. and Trotignon, J.G. and Décréau, P.M.E. and Reinisch, B.W. (2011) On the simultaneity of substorm onset between two hemispheres. Journal of Geophysical Research, 116 (A04211). pp. 1-15. ISSN 0148-0227

Murphy, S. T. and Chroneos, A. and Grimes, R. W. and Jiang, C. and Schwingenschloegl, U. (2011) Phase stability and the arsenic vacancy defect in InxGa1-xAs. Physical review B, 84 (18): 184108. ISSN 1098-0121

Padulo, Mattia and Campobasso, Sergio and Guenov, Marin (2011) Novel uncertainty propagation method for robust aerodynamic design. AIAA Journal, 49 (3). pp. 530-543. ISSN 0001-1452

Paoloni, Claudio and Mineo, Mauro and Krozer, Viktor and Di Carlo, Aldo and Brunetti, Francesca and Ulisse, Giacomo and Durand, A. and Kotiranta, M. and Fiorello, Anna Maria and Dispenza, Massimiliano and Secchi, A. and Zhurbenko, V. and Bouamrane, F. and Megtert, S. and Bouvet, Thomas and Tamburri, E. and Cojocarua, C. -S. and Gohier, A. (2011) Design and Fabrication of a 1 THz Backward Wave Amplifier. Terahertz Science and Technology, 4 (4). pp. 149-163.

Papaioannou, Emmanouil H. and Stoforos, Nikolaos G. and Liakopoulou-Kyriakides, Maria (2011) Substrate contribution on free radical scavenging capacity of carotenoid extracts produced from Blakeslea trispora cultures. World Journal of Microbiology and Biotechnology, 27 (4). pp. 851-858. ISSN 0959-3993

Pazooki, Alireza and Cao, Dongpu and Rakheja, Subhash and Boileau, Paul-Emile (2011) Ride dynamic evaluations and design optimisation of a torsio-elastic off-road vehicle suspension. Vehicle System Dynamics, 49 (9). pp. 1455-1476. ISSN 0042-3114

Polymeris, George S. and Afouxenidis, Dimitrios and Raptis, Spyridoula and Liritzis, Ioannis and Tsirliganis, Nestor C. and Kitis, George (2011) Relative response of TL and component-resolved OSL to alpha and beta radiations in annealed sedimentary quartz. Radiation Measurements, 46 (10). pp. 1055-1064. ISSN 1350-4487

Qureshi, Jawed and Lam, Dennis and Ye, Jianqiao (2011) Effect of shear connector spacing and layout on the shear connector capacity in composite beams. Journal of Constructional Steel Research, 67 (4). pp. 706-719. ISSN 0143-974X

Qureshi, Jawed and Lam, Dennis and Ye, Jianqiao (2011) The influence of profiled sheeting thickness and shear connector's position on strength and ductility of headed shear connector. Engineering Structures, 33 (5). pp. 1643-1656. ISSN 0141-0296

Rakheja, Subhash and Cao, Dongpu and Wang, Zhanqi (2011) Urban bus driver ride and road-friendliness. Part I: model development and role of operating parameters. International Journal of Vehicle Design, 57 (4). pp. 305-332. ISSN 0143-3369

Rivera-Diaz-Del-Castillo, Pedro E J and Xu, W. (2011) Heat treatment and composition optimization of nanoprecipitation hardened alloys. Materials and Manufacturing Processes, 26 (3). pp. 375-381. ISSN 1042-6914

Selwood, M. J. and Monk, S. D. (2011) Construction issues surrounding a portable four-band neutron detection system. Radiation Protection Dosimetry, 144 (1-4). pp. 249-252. ISSN 1742-3406

Senior, A. and Rietveld, M.T. and Honary, F. and Singer, W. and Kosch, M.J. (2011) Measurements and modeling of cosmic noise absorption changes due to radio heating of the D region ionosphere. Journal of Geophysical Research, 116 (A04310). pp. 1-10. ISSN 0148-0227

Sheng, Hong Yu and Li, He Ping and Ye, Jian Qiao and Wu, Xu Tao (2011) State variable method for transient heat conduction analysis of composite sold cylinder. Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 45 (2). pp. 247-251. ISSN 1006-2467

Shinton, I.R.R. and Burt, Graeme and Glasman, C.J. and Jones, R.M. and Wolski, A. (2011) Beam dynamics simulations of the CLIC crab cavity and implications on the BDS. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 657 (1). pp. 126-130.

Shippen, Alan and Joyce, Malcolm (2011) Extension of the Linear Depth Attenuation Method for the Radioactivity Depth Analysis Tool (RADPAT). IEEE Transactions on Nuclear Science, 58 (3). pp. 1145-1150. ISSN 0018-9499

Shippen, Alan and Joyce, Malcolm (2011) The design and calibration of a phantom for depth profiling measurements of entrained radioactivity in silica-based media. Nuclear Engineering and Design, 241 (2). pp. 526-532. ISSN 0029-5493

Subedi, B. and Oniya, E. and Polymeris, G. S. and Afouxenidis, D. and Tsirliganis, N. C. and Kitis, G. (2011) Thermal quenching of thermoluminescence in quartz samples of various origin. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 269 (6). pp. 572-581. ISSN 0168-583X

Taylor, C. James and Chotai, Arun and Burnham, Keith J. (2011) Controllable forms for stabilising pole assignment design of generalised bilinear systems. Electronics Letters, 47 (7). pp. 437-439. ISSN 0013-5194

Theobald, Mike and Taylor, C. James and Burnham, K. J. (2011) Challenges in oil and gas subsea production systems : Control, monitoring and reliability - an introduction. Measurement and Control, 44 (7). pp. 206-207. ISSN 0020-2940

Turvey, Geoffrey John (2011) Experimental evaluation of bolt pull-through in pultruded glass-fibre-reinforced polymer plate. Proceedings of the ICE - Structures and Buildings, 164 (5). pp. 307-319. ISSN 0965-0911

Turvey, Geoffrey John (2011) Flexure of pultruded glass-fibre-reinforced polymer beams with bonded splice joints. Proceedings of the ICE - Structures and Buildings, 164 (5). pp. 333-344. ISSN 0965-0911

Varzakakou, Maria and Roukas, Triantafyllos and Papaioannou, Emmanouil and Kotzekidou, Parthena and Liakopoulou-Kyriakides, Maria (2011) Autolysis of Blakeslea trispora during carotene production from cheese whey in an airlift reactor. Preparative Biochemistry and Biotechnology, 41 (1). pp. 7-21. ISSN 1082-6068

Vicente, Gonzalo and Paiva, Alexandre and Fornari, Tiziana and Najdanovic, Vesna (2011) Liquid-liquid equilibria for separation of tocopherol from olive oil using ethyl lactate. Chemical Engineering Journal, 172 (2-3). pp. 879-884. ISSN 1385-8947

Visak, Zoran P. and Ilharco, Laura M. and Garcia, Ana Rosa and Najdanovic, Vesna and Fareleira, Joao M. N. A. and Caetano, Fernando J. P. and Kijevcanin, Mirjana L. and Serbanovic, Slobodan P. (2011) Volumetric properties and spectroscopic studies of pyridine or nicotine solutions in liquid polyethylene glycols. Journal of Physical Chemistry B, 115 (26). pp. 8481-8492. ISSN 1520-6106

Wang, Xiaodong and Wang, N. and Wang, L. (2011) Hydrogen production by sorption enhanced steam reforming of propane: A thermodynamic investigation. International Journal of Hydrogen Energy, 36 (1). pp. 466-472. ISSN 0360-3199

Yang, Dongmin and Sheng, Yong and Ye, Jianqiao and Tan, Yuanqiang (2011) Dynamic simulation of crack initiation and propagation in cross-ply laminates by DEM. Composites Science and Technology, 71 (11). pp. 1410-1418. ISSN 0266-3538

Yang, Dongmin and Sheng, Yong and Ye, Jianqiao and Tan, Yuanqiang and Jiang, Shengqiang (2011) Numerical Modelling of Damage Progression in Single-fiber Composite under Axial Tension. Advanced Materials Research, 268-27. pp. 280-285. ISSN 1662-8985

Yang, Dongmin and Ye, Jianqiao and Tan, Yuanqiang and Sheng, Yong (2011) Modeling progressive delamination of laminated composites by discrete element method. Computational Materials Science, 50 (3). pp. 858-864. ISSN 0927-0256

Zolotovskaya, Svetlana and Abdolvand, Amin and Kalkandjiev, T. K. and Rafailov, E.U. (2011) Second-harmonic conical refraction: observation of free and forced harmonic waves. Applied Physics B, 103 (1). pp. 9-12. ISSN 0946-2171

tSaoir, Meabh Nic An and Abreu Fernandes, Daniel Luis and Sa, Jacinto and McMaster, Michael and Kitagawa, Kuniyuki and Hardacre, Christopher and Aiouache, Farid (2011) Visualization of water vapour flow in a packed bed adsorber by near-infrared diffused transmittance tomography. Chemical Engineering Science, 66 (24). pp. 6407-6423. ISSN 0009-2509

Contribution in Book/Report/Proceedings

Ahmadizadeh, Saeed and Montazeri, Allahyar and Poshtan, Javad (2011) Identification of a stable model for a flexible plate using frequency domain subspace methods. In: 18th IFAC World Congress :. IFAC, ITA, pp. 6517-6522.

Ahmadizadeh, Saeed and Montazeri, Allahyar and Poshtan, Javad and Mahjoob, M. J. and Kamaldar, M. (2011) Minimax-LQG control of a flexible plate using frequency domain subspace identified models. In: Mechatronics (ICM), 2011 IEEE International Conference on :. IEEE, pp. 265-270. ISBN 978-1-61284-982-9

Ambattu, P. K. and Burt, G. and Dexter, A. and Jones, R. M. and McIntosh, P. A. and Dolgashev, V. and Grudiev, A. (2011) Status of crab cavity design for the clic. In: IPAC 2011 - 2nd International Particle Accelerator Conference :. IPAC 2011 - 2nd International Particle Accelerator Conference . UNSPECIFIED, ESP, pp. 1054-1056. ISBN 9789290833666

Andrieux, Fabrice and Boxall, Colin and Taylor, Robin (2011) Determination of the Constants of Formation of Complexes of Iron(III) and acetohydroxamic acid. In: Applications of Thermodynamics to Biological and Materials Science :. InTech, Rijeka, Croatia, pp. 441-458. ISBN 978-953-307-980-6

Anthony, Richard and Evans, Martyn and Rennie, Allan and Kirby, Eddie (2011) Opportunities offered by additive manufacturing in creative businesses: informing designers. In: 13th International Conference on Engineering & Product Design Education (EPDE 11) :. UNSPECIFIED, GBR, pp. 623-628.

Blair, Gordon and Bennaceur, Amel and Georgantas, Nikolaos and Grace, Paul and Issarny, Valerie and Nundloll-Ramdhany, Vatsala and Paolucci, Massimo (2011) The Role of Ontologies in Emergent Middleware: Supporting Interoperability in Complex Distributed Systems. In: Proceedings of ACM/IFIP/USENIX 12th International Middleware Conference (Middleware 2011) :. Lecture Notes in Computer Science . Springer Verlag, PRT, pp. 410-430. ISBN 978-3-642-25820-6

Bouamrane, Faycal and Bouvet, T. and Megtert, S. and Brunetti, F. and Mineo, Mauro and Paoloni, C. and Tamburri, E. and Terranova, M.L. and Ulisse, G. and Di Carlo, A. and Marchesin, R. and Pham, K. and Durand, A.J. and Kotiranta, M. and Krozer, V. and Guiset, P. and De Rossi, A. and Schnell, J.P. and Legagneux, P. and Dolfi, D. and Fiorello, A.M. and Dispenza, M. and Secchi, A. and Zhurbenko, V. and Gohier, A. and Cojocaru, C.-S. (2011) LIGA-based Slow Wave Structure for a THz Vacuum Amplifier. In: Proceedings of High Aspect Ratio Micro Structure Conference HARMST 2011 :. UNSPECIFIED, TWN.

Brooks, Hadley and Rennie, Allan and Abram, Thomas and McGovern, Jim and Caron, Francois (2011) Variable Fused Deposition Modelling – Concept Design and Tool Path Generation. In: Rapid Design, Prototyping and Manufacturing : Proc Twelfth Conference on. UNSPECIFIED, GBR, pp. 113-122. ISBN 978-0-9566643-1-0

Brooks, Hadley and Rennie, Allan and Abram, Thomas and McGovern, Jim and Caron, Francois (2011) Variable fused deposition modelling : analysis of benefits, concept design and tool path generation. In: Innovative Developments in Virtual and Physical Prototyping : Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, PRT, pp. 511-517. ISBN 978-0-415-68418-7

Carter, R. G. (2011) RF power generation. In: CAS 2010 - CERN Accelerator School : RF for Accelerators, Proceedings. CAS 2010 - CERN Accelerator School: RF for Accelerators, Proceedings . CERN, DNK, pp. 173-207. ISBN 9789290833680

Celik, H Kursat and Hambali, Ruzy Haryati and Rennie, Allan and Akinci, Ibrahim (2011) Deformation simulation of additive manufacturing FDM parts : a case study for greenhouse clips. In: Rapid Design Prototyping and Manufacturing : Proceedings of the Twelfth Conference on. CRDM Ltd, GBR, pp. 155-162. ISBN 978-0-9566643-1-0

Celik, Kursat and Rennie, Allan and Topakci, Mehmet and Akinci, Ibrahim (2011) Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools. In: Proceedings of the XXXIV CIOSTA CIGR V Conference 2011 : Efficient and safe production processes in sustainable agriculture and forestry. UNSPECIFIED, AUT.

Cross, Philip and Taylor, James and Aggidis, George (2011) State dependent feed-forward control for wave energy conversion. In: 9th European Wave and Tidal Energy Conference :. EWTEC, GBR.

Darwish, A. and Abdelsalam, A.K. and Massoud, A.M. (2011) Single phase grid connected current source inverter: Mitigation of oscillating power effect on the grid current. In: IET Conference on Renewable Power Generation (RPG 2011) :. IEEE. ISBN 9781849195362

De Jong, M. and Dutta, R. K. and Sluiter, M. H.F. and Miroux, A. G. and Van Der Zwaag, S. and Sietsma, J. and Rivera Diaz Del Castillo, P. E.J. (2011) First-principles and genetic modelling of precipitation sequences in aluminium alloys. In: Solid-Solid Phase Transformations in Inorganic Materials :. Solid State Phenomena, 172-17 . Trans Tech Publications Inc., Zurich, pp. 285-290. ISBN 9783037851432

Gunn, Kester James and Taylor, C. James and Lingwood, Christopher James (2011) An Independent Validation of the Optimality of Latching and De-clutching Control by Evolutionary Methods. In: 9th European Wave and Tidal Energy Conference :. UNSPECIFIED.

Hu, B. and Glover, P. and Benson, T. (2011) A GPU accelerated modeling of bio-effects associated with magnetic resonance imaging. In: Computational Problem-Solving (ICCP), 2011 International Conference on :. IEEE, CHN, pp. 431-435. ISBN 978-1-4577-0602-8

Hu, B. and Glover, P. and Benson, T. (2011) Simulation guided design of a cryogenic probe for micrometer-scale in vivo MR imaging. In: Computational Problem-Solving (ICCP), 2011 International Conference on :. IEEE, CHN, pp. 647-651. ISBN 978-1-4577-0602-8

Ibarra-Medina, Juansethi and Vogel, M. and Pinkerton, A.J. (2011) A CFD model of laser cladding: From deposition head to melt pool dynamics. In: Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO) :. Laser Institute of America, pp. 378-386.

Joyce, M.J. and Aspinall, M.D. and Cave, F.D. and Lavietes, A.D. (2011) Real-time, digital pulse-shape discrimination in non-hazardous fast liquid scintillation detectors: Prospects for safety and security. In: ANIMMA 2011 - Proceedings: 2nd International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and their Applications :. IEEE. ISBN 9781457709258

Kaufman, John and Rennie, Allan and Quayle, Stephen (2011) Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs. In: Rapid Design, Prototyping and Manufacturing : Proceedings of the Twelfth Conference on. CRDM Ltd, GBR, pp. 135-143. ISBN 978-0-9566643-1-0

Lam, Dennis and Dai, Xianhe and Jamaluddin, Norwati and Ye, Jianqiao (2011) Buckling behaviour of concrete- filled elliptical steel columns. In: 7th International Conference on Steel & Aluminium Structures (ICSAS2011), Kuching, Sarawak, Malaysia :. UNSPECIFIED. ISBN 978-981-08-9247-0

Lam, Dennis and Dai, Xianhe and Ye, Jianqiao and Jamaluddin, Norwati (2011) Finite Element Modelling of Slender Concrete Filled Elliptical Steel Columns. In: EUROSTEEL 2011, Budapest, Hungary. :. UNSPECIFIED.

Lam, Dennis and Qureshi, Jawed and Ye, Jianqiao (2011) Effects of Shear Connector's Position in Profiled Sheeting on Strength and Ductility. In: 5th International Conference on Steel & Composite Structures, Seoul, Korea. :. UNSPECIFIED.

Lin, Hungyen and Fumeaux, Christophe and Fischer, Bernd M. and Abbott, Derek (2011) Near-field & far-field modelling of a sub-wavelength THz source. In: Infrared, Millimeter and Terahertz Waves (IRMMW-THz), 2011 36th International Conference on :. IEEE. ISBN 9781457705106

Lupeanu, Mihaela and Rennie, Allan and Eggbeer, Dominic and Neagu, Corneliu (2011) Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM. In: Rapid Design, Prototyping and Manufacturing : Proceedings of the Twelfth Conference on. CRDM Ltd, GBR, pp. 173-181. ISBN 978-0-9566643-1-0

Lupeanu, Mihaela and Rennie, Allan and Neagu, Corneliu (2011) Additive manufacturing technologies and functional analysis used in product development optimization. In: Rapid Design, Prototyping and Manufacturing : Proceedings of the Twelfth Conference on. CRDM Ltd, GBR, pp. 105-112. ISBN 978-0-9566643-1-0

Lupeanu, Mihaela and Rennie, Allan and Neagu, Corneliu and Celik, Kursat (2011) Product Optimization by Rapid Manufacturing and Targeted Functional Analysis. In: 16th European Forum on Rapid Prototyping and Manufacturing : Proceedings of the. UNSPECIFIED, FRA. ISBN 9782748364651

Ma, Xiandong (2011) Electromagnetic NDT and condition monitoring - A personal view. In: Proceedings of 2011 17th International Conference on Automation and Computing (ICAC’11) : 10 Sept. 2011, Huddersfield, UK. IEEE, pp. 266-271. ISBN 978-1-4673-0000-1

Mahmood, K. and Stevens, N. and Syed, W. U. H. and Pinkerton, A.J. (2011) Material-efficient laser cladding for corrosion resistance. In: Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO) :. Laser Institute of America, pp. 695-704.

Mahmood, Khalid and Khan, Ashfaq and Pinkerton, A. J. (2011) Laser metal deposition of steel components using machining waste as build material. In: Proceedings of CLEO, the IEEE Conference on Lasers and Electro-Optics :. IEEE, Baltimore, -. ISBN 978-1-55752-910-7

Mahmood, Khalid and Pinkerton, A. J. and Syed, Waheed Ul Haq (2011) Laser surface cladding of Inconel 617 chips on mild steel. In: Proceedings of the 25th International Conference on Surface Modification Technologies :. Valardocs. ISBN 978-81-910571-4-0

Mineo, Mauro and Paoloni, C. (2011) Backward wave oscillators for THz applications based on corrugated waveguide. In: Vacuum Electronics Conference (IVEC), 2011 IEEE International :. IEEE, pp. 265-266. ISBN 978-1-4244-8662-5

Mineo, Mauro and Paoloni, C. and Bariou, D. and David, J.-F. and Durand, A.J. (2011) Backward-wave vacuum amplifier for THz amplification. In: Vacuum Electronics Conference (IVEC), 2011 IEEE International :. IEEE, 267 -268. ISBN 978-1-4244-8662-5

Montazeri, Allahyar and Reger, Johann (2011) Developing an IIR Robust Adaptive Algorithm in the Modified Filtered-x RLS Form for Active Noise and Vibration Control Systems. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on :. IEEE, Orlando, pp. 7994-7999. ISBN 978-1-61284-800-6

Morton, Wayne and Green, Sarah and Rennie, Allan and Abram, Thomas (2011) Surface finishing techniques for SLM manufactured stainless steel 316L components. In: Innovative Developments in Virtual and Physical Prototyping : Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, PRT, pp. 503-509. ISBN 978-0-415-68418-7

Neagu, Corneliu and Lupeanu, Mihaela and Rennie, Allan (2011) Geometry Optimisation of Tools used in Milling of Spherical Surfaces. In: SIM2011 - Sustainable Intelligent Manufacturing : Proceedings of the 1st International Conference on Sustainable Intelligent Manufacturing. UNSPECIFIED, PRT, pp. 87-94. ISBN 9789898481030

Paoloni, C. and Brunetti, F. and Di Carlo, A. and Mineo, Mauro and Tamburri, E. and Terranova, M.L. and Ulisse, G. and Durand, A. and Marchesin, R. and Pham, K. and Krozer, V. and Kotiranta, M. and de Rossi, A. and Dolfi, D. and Guiset, P. and Legagneux, P. and Schnell, J.P. and Fiorello, A. and Dispenza, M. and Secchi, A. and Zhurbenko, V. and Megtert, S. and Bouamrane, F. and Cojocaru, C.-S. and Gohier, A. (2011) The OPTHER project: Progress toward the THz amplifier. In: Vacuum Electronics Conference (IVEC), 2011 IEEE International :. IEEE, pp. 55-56. ISBN 978-1-4244-8662-5

Paoloni, C. and Di Carlo, A. and Brunetti, F. and Mineo, Mauro and Ulisse, G. and Durand, A.J. and Krozer, V. and Kotiranta, M. and Fiorello, A.M. and Dispenza, M. and Secchi, A. and Zhurbenko, V. and Boumrane, F. and Bouvet, T. and Megtert, S. and Cojocaru, C.-S. and Gohier, A. (2011) Backward Wave Amplifier Realisation at 1000 GHz Progress whitin EU FP7 OPTHER Project. In: 5th UK-China Workshop on Millimetre-Waves and Terahertz Technologies 2011 :. UNSPECIFIED, Glasgow.

Paoloni, Claudio and Mineo, Mauro (2011) Vacuum Electron Tubes for THz Applications. In: Proceedings of the XXX General Assembly and Scientific Symposium of the International Union of Radio Science (Union Radio Scientifique Internationale-URSI :. UNSPECIFIED, Instanbul, Turkey.

Rehman, I.U. and Khan, A.S. (2011) Dental regeneration. In: Electrospinning for Tissue Regeneration :. Elsevier Inc., pp. 280-297. ISBN 9781845697419

Rivera-Diaz-del-Castillo, Pedro E.J. and de Jong, Maarten and Sluiter, Marcel H.F. (2011) Thermomechanical Processing Design of Nanoprecipitate Strengthened Alloys Employing Genetic Algorithms. In: Supplemental Proceedings : Materials Fabrication, Properties, Characterization, and Modeling. John Wiley and Sons Inc., pp. 477-484. ISBN 9781118029466

Smith, Paul and Rennie, Allan (2011) Automated variation in product design: Using visual basics.net programming language to generate product variation. In: Proceedings of the RAPDASA 2011 Conference :. UNSPECIFIED, ZAF.

Stephen, David and Ye, Jianqiao and Lam, Dennis (2011) Realistic Modeling of High Rise Structures subjected to Progressive Collapse. In: The Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Crete, Greece. :. UNSPECIFIED.

Talari, Abdullah and Tobin, Desmond (2011) Do epidermal melanocytes contribute to the erythema response in human skin post-UVB irradiation? In: Do epidermal melanocytes contribute to the erythema response in human skin post-UVB irradiation? :. British Journal of Dermatology.

Thomas, Stuart and Adamopoulos, George and Bashir, Anneqa and Bradley, Donal and Anthopoulos, Thomas (2011) Crystallographic engineering of oxide semiconductors for transistors and microelectronics applications. In: Materials Research Society :. UNSPECIFIED.

Tian, Yingtao and Liu, Changqing and Hutt, David and Stevens, Bob and Flynn, David and Desmulliez, Marc P. Y. (2011) Investigation of high speed micro-bump formation through electrodeposition enhanced by megasonic agitation. In: Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), 2011 12th International Conference on :. IEEE, pp. 739-744. ISBN 9781457717703

Turvey, Geoffrey (2011) Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites. In: Composite joints and connections: principles, modelling and testing :. Woodhead Publishing Limited, Cambridge, pp. 77-111. ISBN 978-1-845569-990-1

Vogel, M. and Ibarra-Medina, J. and N'Dri, N. and Pinkerton, A. J. (2011) An integrated model of laser clad formation using CFD and FE methods. In: Surface modification technologies XXV : Proceedings of the 25th International Conference on Surface Modification Technologies. Valardocs, India. ISBN 978-81-910571-4-0

Widden, Martin and Rennie, Allan and Quayle, Stephen and Gunn, K. (2011) A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture. In: Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011 :. Technical University of Denmark, DNK, pp. 1039-1048. ISBN 978‐87‐985272‐6‐8

Wildner, E. and Benedetto, E. and Hansen, C. and De Melo Mendonca, T. and Stora, T. and Payet, J. and Chanće, A. and Zorin, V. and Izotov, I. and Rasin, S. and Sidorov, A. and Skalyga, V. and De Angelis, G. and Prete, G. and Cinausero, M. and Kravchuk, V. and Gramegna, F. and Marchi, T. and Collazuol, G. and Mezzetto, M. and De Rosa, G. and Delbar, T. and Loiselet, M. and Keutgen, T. and Mitrofanov, S. and Burt, G. and Dexter, A. and Lamy, T. and Latrasse, L. and Marie-Jeanne, M. and Sortais, P. and Thuillier, T. and Debray, F. and Trophime, C. and Hass, M. and Hirsh, T. and Berkovits, D. and Stahl, A. (2011) Beta beams : An accelerator based facility to explore neutrino oscillation physics. In: IPAC 2011 - 2nd International Particle Accelerator Conference :. IPAC 2011 - 2nd International Particle Accelerator Conference . UNSPECIFIED, ESP, pp. 2535-2537. ISBN 9789290833666

Xia, Min and Kong, Fanrang and Hu, Fei (2011) An approach for bearing fault diagnosis based on PCA and multiple classifier fusion. In: Proceedings - 2011 6th IEEE Joint International Information Technology and Artificial Intelligence Conference, ITAIC 2011 :. Proceedings - 2011 6th IEEE Joint International Information Technology and Artificial Intelligence Conference, ITAIC 2011 . IEEE, CHN, pp. 321-325. ISBN 9781424486236

Xu, Zhou and Richardson, Andrew and Begbie, Mark and Wang, Changhai (2011) Move from Online Test to Fault-tolerant: Design and Simulation of a Multi-Functional MEMS Sensor. In: Proceedings of the IEEE International Mixed Signals, Sensors and Systems Test Workshop :. IEEE COMPUTER SOC, USA, pp. 88-95. ISBN 978-1-4577-1144-2

Yang, Dongmin and Sheng, Yong and Ye, Jianqiao and Tan, Yuanqiang (2011) Multi-scale modelling of damage progression in FRC laminates - Applications of DEM. In: Particle-Based Methods II : Fundamentals and Applications. International Center for Numerical Methods in Engineering (CIMNE), Barcelona, pp. 256-263. ISBN 9788489925670

Zanotto, Simone and Degl'Innocenti, Riccardo and Biasiol, Giorgio and Sorba, Lucia and Tredicucci, Alessandro (2011) Strong coupling between intersubband transitions and surface plasmons sustained by a metallic grating. In: Quantum Electronics and Laser Science Conference, QELS 2011 :. UNSPECIFIED, USA. ISBN 9781557529107

Zhang, Lyn H. and Platt, S. P. (2011) Minimally invasive neutron beam monitoring for single-event effects accelerated testing. In: RADECS 2011 - 12th European Conference on Radiation and Its Effects on Component and Systems, Conference Proceedings :. Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS . UNSPECIFIED, ESP, pp. 945-949. ISBN 9781457705878

Contribution to Conference

Adamopoulos, George (2011) Li-Doped Zinc oxide Transistors and circuits fabricated by spray deposition in ambient atmosphere. In: 7th International Thin-Film Transistor Conference, 2011-03-03.

Adamopoulos, George and Bradley, Donal and Anthopoulos, Thomas (2011) Spray Deposited Lithium-doped Zinc Oxide Thin-film Transistors with Electron Mobility Exceeding 50 cm2/Vs. In: MRS 2010 Fall Meeting, 2010-11-30.

Adams, Jamie and Joyce, Malcolm and Mellor, Matthew (2011) Depth profiling with Principle component Analysis in a variety of contrasting media. In: The 8th conference on Industrial Radiation and Radioisotope Measurement Applications (IRMMA8), 2011-12-19.

Adams, Jamie and Mellor, Matthew and Joyce, Malcolm (2011) The advancement of a technique using principal component analysis for the non-intrusive depth profiling of radioactive contamination. In: IEEE Advancements in Nuclear Instrumentation, Measurement Methods and Analysis (ANIMMA), 2011-06-06.

Adams, Mike and Bowen, James and Cheneler, David and Avery, Andrew and Zhang, Zhibing (2011) The measurement and analysis of the adhesion arising from non-Newtonian liquid bridges. In: Proceedings of 5th International Granulation Workshop, 2011-06-26.

Ahmadizadeh, Saeed and Poshtan, Javad and Montazeri, Allahyar (2011) Design of a robust LQG controller based on subspace identified models for vibration supression of a flexible plate. In: 15th International (19th Annual) Conference on Mechanical Egineering, 2011-04-10 - 2011-04-12.

Ahmadizadeh, Saeed and Poshtan, Javad and Montazeri, Allahyar (2011) A comparative study of different stable identification techniques using frequency domain subspace identification methods for a flexible plate. In: 15th International (19th Annual) Conference on Mechanical Egineering, 2011-04-10 - 2011-04-12.

Akurugoda Gamage, Kelum and Joyce, Malcolm (2011) A comparison of collimator geometries for imaging mixed radiation fields with fast liquid organic scintillators. In: IEEE Advancements in Nuclear Instrumentation, Measurement Methods and Analysis (ANIMMA), 2011-06-06.

Akurugoda Gamage, Kelum and Joyce, Malcolm and Taylor, Graeme (2011) Digital approaches to neutron-gamma imaging with a narrow tungsten collimator aperture and a fast organic liquid scintillator. In: The 8th conference on Industrial Radiation and Radioisotope Measurement Applications (IRMMA8), 2011-12-19.

Bowen, James and Cheneler, David and Robinson, Alex (2011) Direct e-beam lithography of PDMS. In: MNE 2011, 37th International Conference on Micro and Nano Engineering, 2011-09-19 - 2011-09-23.

Bowen, James and Cheneler, David and Ward, Mike and Adams, Mike (2011) The influence of wetting on the buoyancy of particles. In: UK-China Particle Technology Forum III, 2011-07-03 - 2011-07-06.

Burt, G. and Dexter, A. C. and Ambattu, P. K. and Calaga, R. and Montesinos, E. (2011) Multipactor simulations of the SPL power coupler. In: 25th International Linear Accelerator Conference, LINAC 2010, 2010-09-12 - 2010-09-17.

Cao, Dongpu and Khajepour, Amir (2011) Semi-Active Suspension Design for Enhancing Vehicle Ride, Road-Friendliness and Braking Performance. In: SAE World Congress, 2011-04-11 - 2011-04-15.

Celik, H Kursat and Rennie, Allan and Karayel, Davut and Akinci, Ibrahim (2011) Determination of flow parameters through CFD analysis for agricultural irrigation equipment : a case study for a mini valve. In: 11th International Congress on Mechanization and Energy in Agriculture, 2011-09-21 - 2011-09-23.

Cheneler, David and Ward, Mike and Anthony, Carl (2011) Bio-hybrid tactile sensor for the study of the role of mechanoreceptors in human tactile perception. In: MNE 2011, 37th International Conference on Micro and Nano Engineering, 2011-09-19 - 2011-09-23.

Crolla, David and Cao, Dongpu (2011) The impact of hybrid and electric powertrains on vehicle dynamics and control systems. In: IAVSD 2011, 22nd International symposium on Dynamics of Vehicles on Roads and Tracks, 2011-08-14 - 2011-08-19.

Gamage, Kelum and Joyce, Malcolm (2011) Real-time digital imaging of neutrons and gamma rays with a fast liquid scintillator detector. In: Neutron Users Club Meeting 2011, 2011-11-01 - 2011-11-01.

Green, Sarah and OMeara, N and Rennie, Allan (2011) Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems. In: VRAP 5 Advances in Virtual and Rapid Prototyping, 2010-09-18 - 2010-09-24.

Hambali, Ruzy Haryati and Vaudelin, Maeva and Rennie, Allan (2011) Optimisation of build orientation for FDM additive manufactured products. In: International Conference on Humanities, Social Sciences, Science & Technology 2011 (ICHSST’11), 2011-06-27 - 2011-06-28.

Hillmann, Mark and Li, Ming and Quayle, Stephen (2011) Numerical and experimental investigation of a novel breakwater combining coastal defence and energy generation for near shore environment. In: 9th European Wave and Tidal Energy Conference, 2011-09-04 - 2011-09-09.

Hillmann, Mark and Quayle, Stephen and Li, Ming (2011) Preliminary investigation of a novel breakwater combining coastal defence and energy generation for near shore environments. In: ICE Coastal Management 2011, 2011-11-15 - 2011-11-16.

Joyce, Malcolm and Akurugoda Gamage, Kelum (2011) Real-time, digital imaging of neutrons and gamma rays with a fast liquid scintillation detector. In: IEEE Nuclear Science Symposium, 2011-10-23.

Joyce, Malcolm and Aspinall, Michael (2011) Real-time digital pulse-shape discrimination in non-hazardous fast liquid scintillation detectors : prospects for safety and security. In: IEEE Advancements in Nuclear Instrumentation, Measurement Methods and Analysis (ANIMMA), 2011-06-06.

Lambert, Christopher and Rennie, Allan (2011) Delivering Regional Eco-Innovation through Knowledge Exchange. In: Sustainable Innovation 2011, 2011-10-24 - 2011-10-25.

Lavietes, Anthony and Pickrell, M and Plentada, R and Mascarenhas, M and Liguori, C and Aspinall, Michael and Joyce, Malcolm (2011) Liquid scintillator neutron detection for real-time nuclear material assay. In: IEEE Nuclear Science Symposium, 2011-10-23.

Lin, Hungyen and Fumeaux, Christophe and Fischer, Bernd M. and Abbott, Derek (2011) Sub-wavelength THz source modelling. In: International Symposium on Terahertz Nanoscience (TeraNano 2011) & Workshop of International Terahertz Research Network (GDR-I), 2009-11-24 - 2009-11-29.

Ma, Xiandong (2011) Online intelligent condition monitoring of electrical machines. In: The 24th International Congress on Condition Monitoring and Diagnostics Engineering Management (COMADEM2011), 2011-05-30 - 2011-06-01.

Najdanovic-Visak, Vesna (2011) Carbon dioxide conversation : overcoming thermodynamic limitations. In: Workshop on the Potential of CO2 Chemistry for the Optimization of CO2 Capture Processes, 2011-06-17.

Pattanasattayavong, P and Thomas, Stuart and Adamopoulos, George and Labram, John and Anthopoulos, Thomas (2011) Hybrid Phototransistors-based on Dye-functionalised ZnO Semiconducting Channels. In: MRS 2011 Spring Meeting, 2011-04-26.

Shah, Charan M. and Sriram, Sharath and Bhaskaran, Madhu and Khodasevych, I. E. and Withayachumnankul, W. and Ung, B. S. Y. and Lin, Hungyen and Abbott, Derek and Mitchell, A (2011) Microfabrication of flexible large-area terahertz fishnet metamaterials. In: International Conference on Materials for Advanced Technologies, 2011-06-26 - 2011-07-01.

Turvey, Geoffrey (2011) Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions. In: International Conference on Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Winchester, Jonathan and Quayle, Stephen (2011) Torque ripple and power in a variable pitch vertical axis tidal turbine. In: 9th European Wave and Tidal Energy Conference, 2011-09-04 - 2011-09-09.

Book/Report/Proceedings

Rennie, Allan and Bocking, C. E., eds. (2011) Rapid Design, Prototyping and Manufacturing : Proceedings of the Twelfth Conference on. CRDM Ltd. ISBN 978-0-9566643-1-0