Items where Department is "Engineering" and Year is 2010
Jacobson, D.M and Rennie, Allan and Bocking, C. E., eds. (2010) Rapid Design, Prototyping and Manufacturing : Proceedings of the Eleventh National Conference on. CRDM Ltd. ISBN 978-0-9566643-0-3
UNSPECIFIED (2010) Designing and building a RF receiver coil for wrist imaging at 7T. In: Proc. 16th Annual Meeting of the British Chapter of the ISMRM, 2010-09-01 - 2010-09-03.
Adamopoulos, George (2010) Low-voltage, high-mobility transparent oxide transistors fabricated by spray coating. In: Fifth International Conference on Multiscale Materials Modelling, 2010-10-04.
Adamopoulos, George and Bashir, Aneeqa and Thomas, Stuart and Gillin, William P. and Georgakopoulos, Stamatis and Shkunov, Maxim and Baklar, Mohamed A. and Stingelin, Natalie and Maher, Robert C. and Cohen, Lesley F. and Bradley, Donal D. C. and Anthopoulos, Thomas D. (2010) Spray-Deposited Li-Doped ZnO Transistors with Electron Mobility Exceeding 50 cm(2)/Vs. Advanced Materials, 22 (42). pp. 4764-4769. ISSN 0935-9648
Adams, J. C. and Joyce, Malcolm J. and Mellor, M. (2010) A phantom for research studies of radiologically-contaminated land. In: 2010 IEEE Nuclear Science Symposium, 2010-11-01.
Adams, J. C. and Mellor, M. and Joyce, Malcolm J. (2010) Depth Determination of Buried Caesium-137 and Cobalt-60 Sources Using Scatter Peak Data. IEEE Transactions on Nuclear Science, 57 (5). pp. 2752-2757. ISSN 0018-9499
Adams, Jamie C. and Mellor, Matthew and Joyce, Malcolm J. (2010) Depth profiling of radiological contamination in sand using Principal Component Analysis. In: IEEE NPSS International Workshop on Real Time Measurement, Instrumentation & Control, 2010-06-25 - 2010-06-26.
Aggidis, George A. and Brett, Chris (2010) The Launch of the Heron Corn Mill Hydro Plant(Invited Keynote Paper). In: What's on in the Southern Lake District, 2010-04-03. (Unpublished)
Aggidis, George A. and Luchinskaya, E. and Rothschild, R. and Howard, D. C. (2010) The costs of small-scale hydro power production: Impact on the development of existing potential. Renewable Energy, 35 (12): 35. pp. 2632-2638.
Ahsan, M. N. and Bradley, R. and Pinkerton, A.J. (2010) X-ray analysis of pore formation in direct metal deposition and its causes. In: Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO) :. Laser Institute of America, pp. 159-165.
Ahsan, M. N. and Wang, W. and Pinkerton, A.J. (2010) An iterative, energy-mass balance model for laser metal deposition. In: Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO) :. Laser Institute of America, pp. 149-158.
Akurugoda Gamage, Kelum Asanga and Hawkes, Nigel and Taylor, Graeme (2010) Digital approaches to field neutron spectrometry-NPL Report IR 23. Working Paper. National Physical Laboratory.
Al-Gayem, Qais and Liu, Hongyuan and Richardson, A. M. D. and Burd, N. and Kumar, Mukesh (2010) An on-line monitoring technique for electrode degradation in bio-fluidic microsystems. In: Proceedings of the 2010 IEEE International Test Conference (ITC) :. IEEE, Austin, Texas, pp. 1-10. ISBN 978-1-4244-7206-2
Allin, S.M. and Towler, J. and Gaskell, S.N. and Saha, B. and Martin, W.P. and Page, P.C.B. and Edgar, M. (2010) Enolate amination and derivatization of a pyrroloisoquinoline template : Towards novel peptidomimetics. Tetrahedron, 66 (49). pp. 9538-9544. ISSN 0040-4020
Ambattu, Praveen and Burt, Graeme and Tahir, I. and Corlett, P. and Moss, Andrew and McIntosh, P. A. (2010) Low energy RF accelerator for various applications. In: Proceedings of Linear Accelerator Conference LINAC2010 :. UNSPECIFIED, pp. 127-129.
Andrieux, Fabrice P. L. and Boxall, Colin and May, Iain and Taylor, Robin J. (2010) A preliminary study of the hydrolysis of hydroxamic acid complexants in the presence of oxidising metal ions. IOP Conference Series: Materials Science and Engineering, 9 (1): 012081. -. ISSN 1757-8981
Appleby, Michaela and Lambert, Christopher and Rennie, Allan and Buckley, Adam (2010) A comparison of carbon footprint calculations for end of life product recovery methods using PAS 2050. In: Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis : (ESDA 2010). ASME, TUR. ISBN 978-0-7918-3877-8
Aspinall, Michael (2010) Apparatus and Method for Radiation Analysis. CAB/P132779GB.
Beharrell, Matthew J. and Kavanagh, Andrew J. and Honary, F. (2010) On the origin of high m magnetospheric waves. Journal of Geophysical Research, 115 (A02201). pp. 1-12. ISSN 0148-0227
Bilotta, G. S. and Krueger, Tobias and Brazier, R. E. and Butler, P. and Freer, J. and Hawkins, J. M. B. and Haygarth, Philip M. and Macleod, C. J. A. and Quinton, John N. (2010) Assessing catchment-scale erosion and yields of suspended solids from improved temperate grassland. Journal of Environmental Monitoring, 12 (3). pp. 731-739. ISSN 1464-0325
Bowen, James and Cheneler, David and Walliman, Dominic and Arkless, Stuart G. and Zhang, Zhibing and Ward, Michael C. L. and Adams, Michael J. (2010) On the calibration of rectangular atomic force microscope cantilevers modified by particle attachment and lamination. Measurement Science and Technology, 21 (11): 115106. ISSN 0957-0233
Bromley, Michael A. and Boxall, Colin and Galea, Sarah and Goodall, Philip S. and Woodbury, Simon (2010) Photocatalytic initiation of electroless deposition. Journal of Photochemistry and Photobiology A: Chemistry, 216 (2-3). pp. 228-237. ISSN 1010-6030
Brunetti, F. and Cojocarua, C. -S. and de Rossi, A. and Di Carlo, A. and Dispenza, M. and Dolfi, D. and Durand, A. and Fiorello, A. and Gohier, A. and Guiset, P. and Korantia, M. and Krozer, V. and Legagneux, P. and Marchesin, R. and Megtert, S. and Bouamrane, F. and Mineo, Mauro and Paoloni, C. and Pham, K. and Schnell, J. P. and Secchi, A. and Tamburri, E. and Terranova, M. L. and Ulisse, G. and Zhurbenko, V. (2010) European Research on THz Vacuum Amplifiers. In: 35TH INTERNATIONAL CONFERENCE ON INFRARED, MILLIMETER, AND TERAHERTZ WAVES (IRMMW-THZ 2010) :. IEEE, Rome, -. ISBN 978-1-4244-6657-3
Callin, S and Gadoud, A and Leahy, H and Lambert, K and Ward, J (2010) What difference does a form make? A re-audit of a palliative care handover form for Out of Hours GPs. Palliative Medicine, 24 (2). pp. 241-2. ISSN 0269-2163
Cao, Dongpu and Khajepour, Amir (2010) Influence of oil compressibility of fluidic suspensions on vehicle roll stability and ride dynamics. In: SAE ComVEC 2010, 2010-10-05 - 2010-10-06.
Cao, Dongpu and Khajepour, Amir and Song, Xubin (2010) Wheelbase filtering and characterization of road profiles for vehicle dynamics. In: AMSE Int. Conference on Advanced Vehicle and Tire Technologies (AVTT 2010), 2010-08-15 - 2010-08-18.
Cao, Dongpu and Rakheja, Subhash and Su, Chun-Yi (2010) Roll- and pitch-plane coupled hydro-pneumatic suspension. Part I Feasibility analysis and suspension properties. Vehicle System Dynamics, 48 (3). pp. 361-386. ISSN 0042-3114
Cao, Dongpu and Rakheja, Subhash and Su, Chun-Yi (2010) Roll- and pitch-plane-coupled hydro-pneumatic suspension. Part 2 dynamic response analyses. Vehicle System Dynamics, 48 (4). pp. 507-528. ISSN 0042-3114
Carter, Richard (2010) Simple Model of an Inductive Output Tube. IEEE Transactions on Electron Devices, 57 (3). pp. 720-725. ISSN 0018-9383
Celik, H Kursat and Topakci, Mehmet and Canakci, Murad and Rennie, Allan and Akinci, Ibrahim (2010) Modal analysis of agricultural machineries using finite element method : a case study for a V-belt pulley of a fodder crushing machine. Journal of Food, Agriculture and Environment, 8 (3-4). pp. 439-446. ISSN 1459-0255
Celik, Kursat and Karayel, Davut and Caglayan, Nuri and Rennie, Allan and Akinci, Ibrahim (2010) Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter. In: 11th National Conference on Rapid Design, Prototyping and Manufacturing : Proceedings of. CRDM Ltd, GBR, pp. 181-191. ISBN 978-0-9566643-0-3
Cheneler, David and Bowen, James and Ward, Mike and Adams, Mike (2010) Micro squeeze flow rheometer for high frequency analysis of nano-litre volumes of viscoelastic fluid. In: MNE 2010, 36th International Conference on Micro and Nano Engineering, 2010-09-19 - 2010-09-22.
Constable, D. A. (2010) Investigations into beam-plasma interactions. In: UNSPECIFIED.
Constable, D. A. and Ronald, Kevin and He, Wenlong and Fampris, Xenofon S. and Phelps, Alan D. R. and Cross, Adrian W. (2010) Components for the testing of a co-harmonic gyrotron cavity. In: National Vacuum Electronics Conference (NVEC) 2010, 2010-07-14 - 2010-07-15, Cockcroft Institute.
Constable, D. A. and Ronald, Kevin and He, Wenlong and Phelps, Alan D.R. and Cross, Adrian W. (2010) Recent progress on a co-harmonic cyclotron resonant maser. In: 37th IOP Annual Conference on Plasma Physics, 2010-03-30 - 2010-04-01, Low Wood Hotel.
Constable, David and Ronald, Kevin and He, Wenlong and Fampris, Xenofon S. and Whyte, Colin G. and Robertson, Craig W. (2010) A novel cylindrical TE2,1 mode converter. Review of Scientific Instruments, 81 (9): 094702. ISSN 0034-6748
Cross, Philip and Taylor, C. James and Aggidis, George A. (2010) Continuous-time feed-forward proportional-integral-plus control. In: UKACC International Conference Control 2010 :. UNSPECIFIED, pp. 229-234. ISBN 978-184600-0386
Dallas, G. I. and Polymeris, G. S. and Afouxenidis, D. and Tsirliganis, N. C. and Tsagas, N. F. and Kitis, G. (2010) Correlation between TL and OSL signals in KMgF3:Ce3+ : bleaching study of individual glow-peaks. Radiation Measurements, 45 (3-6). pp. 537-539. ISSN 1350-4487
Degl'Innocenti, Riccardo and Kumar, M. and Xu, J. H. and Tredicucci, A. (2010) Differential scanning optical microscopy with a thz quantum cascade laser source. In: IRMMW-THz 2010 - 35th International Conference on Infrared, Millimeter, and Terahertz Waves, Conference Guide :. IEEE, ITA. ISBN 9781424466573
Dispenza, M. and Brunetti, F. and Cojocaru, C. -S. and de Rossi, A. and Di Carlo, A. and Dolfi, D. and Durand, A. and Fiorello, A. M. and Gohier, A. and Guiset, P. and Kotiranta, M. and Krozer, V. and Legagneux, P. and Marchesin, R. and Megtert, S. and Bouamrane, F. and Mineo, Mauro and Paoloni, C. and Pham, K. and Schnell, J. P. and Secchi, A. and Tamburri, E. and Terranova, M. L. and Ulisse, G. and Zhurbenko, V. (2010) Towards a THz Backward Wave Amplifier in European OPTHER project. In: MILLIMETRE WAVE AND TERAHERTZ SENSORS AND TECHNOLOGY III :. SPIE-INT SOC OPTICAL ENGINEERING, Toulouse, -. ISBN 978-0-8194-8355-3
Eghlio, R. M. and Pinkerton, A. J. and Li, Lin (2010) Net shape laser butt welding of mild steel sheets. In: Proceedings of the 36th International Matador Conference :. Springer, London, pp. 267-270. ISBN 978-1-84996-431-9
Eghlio, R. M. and Pinkerton, A.J. and Sezer, H. K. and Li, L. (2010) Process characteristics of single mode fibre laser net shape welding. In: Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO) :. Laser Institute of America.
Exadaktylos, Vasileios and Taylor, C. James (2010) Multi-objective performance optimisation for model predictive control by goal attainment. International Journal of Control, 83 (7). pp. 1374-1386. ISSN 0020-7179
Fu, Feng and Lam, Dennis and Ye, Jianqiao (2010) Moment resistance and rotation capacity of semi-rigid composite connections with precast hollowcore slabs. Journal of Constructional Steel Research, 66 (3). pp. 452-461. ISSN 0143-974X
Fukuyama, A. and Sen, S. and Honary, F. (2010) Unstable Rayleigh-Taylor modes in the ionosphere in the presence of dusts. Radiation Effects and Defects in Solids: Incorporating Plasma Science and Plasma Technology, 165 (2). pp. 123-133. ISSN 1042-0150
Gamage, Kelum and Joyce, Malcolm and Hawkes, Nigel (2010) Real-time digital measurement gamma-neutron ratios in mixed radiation fields arising from standard isotopic sources. In: IEEE Real-Time Measurement Instrumentation and Control (RTMIC-2010), 2009-06-25 - 2009-06-26.
Ganah, Abdulkadir and Rennie, Allan (2010) Skills development of employees at SMEs in the construction sector in the North of England. In: The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors (COBRA 2010) : Proceedings of. Royal Institution of Chartered Surveyors (RICS), FRA. ISBN 978-1-84219-619-9
Green, Sarah and Meyer, JRF (2010) Motivation of engineering students-considerations for programme design. In: Engineering Education 2010, 2010-07-06 - 2010-07-08.
Grill, Martin and Barratt, Keith and Honary, Farideh (2010) A flexible streaming software architecture for scientific instruments. Earth Science Informatics. pp. 1-7. ISSN 1865-0473
Gunn, Kester and Lingwood, Chris and Taylor, C. James (2010) Multi-objective evolutionary optimisation of the geometry of a class of controlled wave energy converter. In: UKACC International Conference Control 2010 :. UNSPECIFIED, pp. 349-354. ISBN 978-184600-0386
Hambali, Ruzy Haryati and Celik, Kursat and Smith, Paul and Rennie, Allan and Ucar, M (2010) Effect of build orientation on FDM parts : a case study for validation of deformation behaviour by FEA. In: International Conference on Design and Concurrent Engineering (iDECON 2010) : Manufacturing Challenges Towards Global Sustainability. Penerbit Universiti (UTeM), pp. 224-228. ISBN 983-2948-84-1
Hambali, Ruzy Haryati and Rennie, Allan (2010) Analysis of existing Additive manufacturing material selectors. In: United Kingdom - Malaysia - Ireland Engineering Science Conference 2010 (UMIES 2010), 2010-06-23 - 2010-06-25.
Hawkes, Nigel and Akurugoda Gamage, Kelum Asanga and Taylor, Graeme (2010) Digital approaches to field neutron spectrometry. Radiation Measurements, 45 (10). pp. 1305-1308. ISSN 1350-4487
Hu, B and Farhat, S. and Glover, P (2010) A horn antenna improves the transmit field homogeneity in the human brain using the travelling wave technique. In: Proc. 19th ISMRM Annual Meeting and Exhibition, 2010-05-01 - 2010-05-05.
Hu, Julia and Varma, G and Keevil, S.F. and Randell, C. and Glover, P (2010) High resolution mouse imaging using a liquid nitrogen cooled receive only coil on a 3T clinical scanner. In: Proc. 19th ISMRM Annual Meeting and Exhibition, 2010-05-01 - 2010-05-05.
Ibarra-Medina, J. and Pinkerton, A. J. (2010) The influence of powder stream shape and substrate position on mass addition in laser cladding. In: Proceedings of the 24th International Conference on Surface Modification Technologies :. Valardocs. ISBN 978-81-910571-2-6
Ibarra-Medina, J. and Pinkerton, A. J. (2010) A numerical investigation of powder heating in coaxial laser direct metal deposition. In: Proceedings of the 36th International Matador Conference :. Springer, London, pp. 455-458. ISBN 978-1-84996-431-9
Ibarra-Medina, Juansethi and Pinkerton, Andrew J. (2010) A CFD model of the laser, coaxial powder stream and substrate interaction in laser cladding. Physics Procedia, 5 (B). pp. 337-346. ISSN 1875-3892
Jamaluddin, N. and Lam, D. and Ye, J. (2010) Experimental studies of elliptical concrete-filled tube columns. In: TUBULAR STRUCTURES XIII :. CRC PRESS-TAYLOR & FRANCIS GROUP, Hong Kong, pp. 333-340. ISBN 978-0-415-58473-9
Jamil, M.S.C. and Pinkerton, A.J. and Li, L. and Sheikh, M.A. (2010) The effect of beam geometry on diode laser forming of sheet metals. In: Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO) :. Laser Institute of America, pp. 495-502.
Jiang, Xi (2010) Numerical studies of vortex shedding in forced oscillatory non-premixed flames. In: 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics :. IOP Publishing Ltd, BRISTOL, -. ISBN *****************
Jiang, Xi and Siamas, G. A. and Jagus, K. and Karayiannis, T. G. (2010) Physical modelling and advanced simulations of gas-liquid two-phase jet flows in atomization and sprays. Progress in Energy and Combustion Science, 36 (2). pp. 131-167. ISSN 0360-1285
Joyce, M. J. and Aspinall, Michael and Cave, F. D. and Georgopoulos, K. and Jarrah, Z. (2010) The Design, Build and Test of a Digital Analyzer for Mixed Radiation Fields. IEEE Transactions on Nuclear Science, 57 (5). pp. 2625-2630. ISSN 0018-9499
Joyce, Malcolm (2010) The Fender Stratocaster electric guitar : a case study for both non-transferable and transferable skills learning in a generalist electronic engineering cohort. IEEE Transactions on Education, 53 (3). pp. 397-404.
Joyce, Malcolm J. (2010) Real-time digital neutron/γ discrimination in non-flammable fast scintillators. In: NPL Neutron Users Club meeting, 2010-10-01.
Joyce, Malcolm J. and Garnsey, Richard and Nickson, Ian (2010) Nuclear Lessons Learned. Royal Academy of Engineering. ISBN 1903496608 9781903496602
Kamara, A. M. and Wang, W. and Marimuthu, S. and Pinkerton, A. J. and Li, L. (2010) Influence of melt pool convection on residual stress induced in laser cladding and powder deposition. In: Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO) :. Laser Institute of America.
Kemp, Roger and Blythe, Phil and Brace, Chris and James, Pete and Parry-Jones, Richard and Thielens, Davy and Thomas, Martyn and Wenham, Richard and Urry, John (2010) Electric vehicles : charged with potential. Royal Academy of Engineering, London. ISBN 190349656X
Kemp, Roger and Ion, Sue and Cumpsty, Nick and Fisk, David and Jenkins, Nick and Kelly, Michael and Loughhead, John and Roberts, John (2010) Generating the future : UK energy systems fit for 2050. Royal Academy of Engineering, London. ISBN 1 903496 54 3
Khan, A. and Haque, M. M. and Mir, Niyaz A. and Muneer, M. and Boxall, C. (2010) Heterogeneous photocatalysed degradation of an insecticide derivative acetamiprid in aqueous suspensions of semiconductor. Desalination, 261 (1-2). pp. 169-174. ISSN 0011-9164
Lagatsky, A. A. and Leburn, C. G. and Brown, C. T. A. and Sibbett, W. and Zolotovskaya, Svetlana and Rafailov, E. U. (2010) Ultrashort-pulse lasers passively mode locked by quantum-dot-based saturable absorbers. Progress in Quantum Electronics, 34 (1). pp. 1-45. ISSN 0079-6727
Lam, Dennis and Ye, Jianqiao and Qureshi, Jawed (2010) Composite Behaviour of Headed Stud Shear Connectors in Pairs with Profiled Metal Deck Flooring. In: 4th International Conference on Steel & Composite Structures :. UNSPECIFIED.
Lambert, Christopher and Rennie, Allan (2010) Placing postgraduate research students at the heart of knowledge exchange : benefits for academia and industry. In: Proceedings of the 3rd International Symposium for Engineering Education (ISEE2010) : educating engineers for a changing world : leading transformation from an unsustainable global society. UNSPECIFIED, IRL, pp. 485-493. ISBN ISSN: 2009 3225
Li, M. and Wang, Xiaodong and Li, S. and Wang, S. and Ma, X. (2010) Hydrogen production from ethanol steam reforming over nickel based catalyst derived from Ni/Mg/Al hydrotalcite-like compounds. International Journal of Hydrogen Energy, 35 (13). pp. 6699-6708. ISSN 0360-3199
Lin, Hungyen and Fischer, Bernd M. and Abbott, Derek (2010) Comparative simulation study of ZnTe heating effects in focused THz radiation generation. In: Infrared Millimeter and Terahertz Waves (IRMMW-THz), 2010 35th International Conference on :. IEEE. ISBN 9781424466559
Lin, Hungyen and Fumeaux, Christophe and Fischer, Bernd M. and Abbott, Derek (2010) Modelling of sub-wavelength THz sources as Gaussian apertures. Optics Express, 18 (17). pp. 17672-17683. ISSN 1094-4087
Lingwood, Chris and Burt, Graeme (2010) High power high efficiency multiple-beam klystron design. PhD thesis, Lancaster University.
Liu, Guofu and Joyce, Malcolm J. and Ma, Xiandong and Aspinall, Michael (2010) A digital method for the discrimination of neutrons and γ rays with organic scintillation detectors using frequency gradient analysis. IEEE Transactions on Nuclear Science, 57 (3). 1682 -1691. ISSN 0018-9499
Luchinskaya, Elena and Aggidis, George and Howard, D.C. (2010) Technological Progress Improves Plans for Sustainable Small-Scale Hydropower Generation. In: Reliable hydropower for a safe and sustainable power production : 16th International Seminar on Hydropower Plants. Institute for Energy Systems and Thermodynamics, Vienna, pp. 795-804. ISBN 9783950193763
M'Guil, S. and Wen, W. and Ahzi, S. (2010) Numerical study of deformation textures, yield locus, rolling components and Lankford coefficients for FCC polycrystals using the new polycrystalline φ-model. International Journal of Mechanical Sciences, 52 (10). pp. 1313-1318. ISSN 0020-7403
Ma, X (2010) Analysis and verification of fuel exhaust emissions. Working Paper. UNSPECIFIED. (Unpublished)
Ma, X. (2010) Performance evaluation of Zeolite Rankine cycle systems using scroll expander for combined heat and electricity generation. Working Paper. UNSPECIFIED. (Unpublished)
Ma, X. and Peyton, A. J. (2010) Feature detection and monitoring of eddy current imaging data by means of wavelet based singularity analysis. NDT and E International, 43 (8). pp. 687-694.
Mahmood, Khalid and Syed, W. U. H. and Pinkerton, A.J. (2010) Laser direct deposition of carbon steel machining waste. In: Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO) :. Laser Institute of America, pp. 1533-1540.
Manic, Marina S. and Najdanovic-Visak, Vesna (2010) Separation of antibiotics from aqueous solution using ionic liquids and supercritical carbon dioxide. In: II Iberoamerican Conference on Supercritical Fluids, PROSCIBA., 2010-04-05.
Mardiani-Euers, E. and Quayle, S. D. and Widden, M. B. (2010) An economic hydropower scheme for low-head sites, using a siphon system. In: 16th International Conference on Hydropower Plants, 2010-11-24 - 2010-11-26.
Martin, T. E. and Blackburn, George Alan and Simcox, W. (2010) An assessment of the effectiveness of two methods in describing a neotropical cloud forest bird community. Ornitologia Neotropical, 21. pp. 131-147. ISSN 1075-4377
McCabe, A. P. and Aggidis, G. A. and Widden, M. B. (2010) Optimizing the shape of a surge-and-pitch wave energy collector using a genetic algorithm. Renewable Energy, 35 (12). pp. 2767-2775. ISSN 0960-1481
McCabe, A. P. and Stables, M. A. and Aggidis, George A. (2010) A Frequency-Response Design Method for the Control of Wave Energy Converters in Irregular Seas. In: 3rd International conference and exhibition on Ocean Energy, ICOE 2010, 2010-10-06 - 2010-10-08. (Unpublished)
Mineo, Mauro and Bariou, D. and David, J. F. and Durand, A. J. and Paoloni, C. (2010) Backward Wave Oscillator for THz Frequency Range Based on Double Corrugation Slow-Wave Structure. In: 35TH INTERNATIONAL CONFERENCE ON INFRARED, MILLIMETER, AND TERAHERTZ WAVES (IRMMW-THZ 2010) :. IEEE, Rome, -. ISBN 978-1-4244-6657-3
Mineo, Mauro and Di Carlo, A. and Paoloni, C. (2010) Analytical Design Method for Corrugated Rectangular Waveguide SWS THz Vacuum Tubes. Journal of Electromagnetic Waves and Applications, 24 (17-18). pp. 2479-2494. ISSN 0920-5071
Mineo, Mauro and Paoloni, C. (2010) Improved rod shapes for helix slow wave structures. In: Vacuum Electronics Conference (IVEC), 2010 IEEE International :. IEEE, pp. 229-230. ISBN 978-1-4244-7098-3
Mineo, Mauro and Paoloni, C. (2010) Narrow corrugation rectangular waveguide for terahertz TWTs. Electronics Letters, 46 (13). pp. 927-928. ISSN 0013-5194
Mineo, Mauro and Paoloni, C. and Bariou, D. and David, J.-F. and Durand, A.J. (2010) Design method for Double Corrugation Rectangular Waveguide THz vacuum amplifiers. In: Vacuum Electronics Conference (IVEC), 2010 IEEE International :. IEEE, 325 -326. ISBN 978-1-4244-7098-3
Mineo, Mauro and Paoloni, Claudio (2010) Corrugated Rectangular Waveguide Tunable Backward Wave Oscillator for Terahertz Applications. IEEE Transactions on Electron Devices, 57 (6). pp. 1481-1484. ISSN 0018-9383
Mineo, Mauro and Paoloni, Claudio (2010) Double-Corrugated Rectangular Waveguide Slow-Wave Structure for Terahertz Vacuum Devices. IEEE Transactions on Electron Devices, 57 (11). pp. 3169-3175. ISSN 0018-9383
Mohamady, Samira and Ahmad, Raja Kamil Raja and Montazeri, Allahyar and Zahari, Rizal and Jalil, Nawal Aswan Abdul (2010) Modeling and Eigenfrequency Analysis of Sound-Structure Interaction in a Rectangular Enclosure with Finite Element Method. Advances in Acoustics and Vibration: 371297.
Mohamady, Samira and Montazeri, Allahyar (2010) Active minimization of harmonic sound pressure in a vibro—acoustic finite element model of a rectangular enclosure. In: Inter-Noise 2010, 2010-06-15 - 2010-06-16.
Mohamady, Samira and Montazeri, Allahyar and Ahmad, Raja Kamil Raja (2010) Active minimization of periodic sound inside a vibro-acoustic rectangular enclosure using finite element model. In: 39th International Congress on Noise Control Engineering 2010, INTER-NOISE 2010 :. 39th International Congress on Noise Control Engineering 2010, INTER-NOISE 2010 . UNSPECIFIED, PRT, pp. 280-289. ISBN 9781617823961
Montazeri, Allahyar and Poshtan, Javad (2010) A computationally efficient adaptive IIR solution to active noise and vibration control systems. IEEE Transactions on Automatic Control, 55 (11). pp. 2671-2676. ISSN 0018-9286
Montazeri, Allahyar and Poshtan, Javad and Poshtan, Majid (2010) Analysis of the behavior of coupled loudspeakers in a MIMO ANC system in an enclosure. In: Control Applications (CCA), 2010 IEEE International Conference on :. IEEE International Conference on Control Applications . IEEE, JPN, pp. 228-233. ISBN 978-1-4244-5362-7
Morioka, A. and Miyoshi, Y. and Miyashita, Y. and Kasaba, Y. and Misawa, H. and Tsuchiya, F. and Kataoka, R. and Kadokura, A. and Mukai, T. and Yumoto, K. and Menietti, D.J. and Parks, G. and Liou, K. and Honary, F. and Donovan, E. (2010) Two-step evolution of auroral acceleration at substorm onset. Journal of Geophysical Research, 115 (A11213). pp. 1-21. ISSN 0148-0227
Moshaverinia, A. and Brantley, W.A. and Chee, W.W.L. and Rohpour, N. and Ansari, S. and Zheng, F. and Heshmati, R.H. and Darr, J.A. and Schricker, S.R. and Rehman, I.U. (2010) Measure of microhardness, fracture toughness and flexural strength of N-vinylcaprolactam (NVC)-containing glass-ionomer dental cements. Dental Materials, 26 (12). pp. 1137-1143. ISSN 0109-5641
Murphy, S. T. and Gilbert, C. A. and Smith, R. and Mitchell, T. E. and Grimes, R. W. (2010) Non-stoichiometry in MgAl2O4 spinel. Philosophical Magazine, 90 (10). pp. 1297-1305. ISSN 1478-6435
Murphy, S. T. and Lu, H. and Grimes, R. W. (2010) General relationships for isovalent cation substitution into oxides with the rocksalt structure. Journal of physics and chemistry of solids, 71 (5). pp. 735-738. ISSN 0022-3697
Najdanovic-Visak, Vesna (2010) SÍNTESE DE BIODIESEL A PARTIR DE BORRAS DE CAFÉ POR TRANSESTERIFICAÇÃO DIRECTA COM MISTURAS ÁLCOOL/DIÓXIDO DE CARBONO. PT104506-A1.
Najdanovic-Visak, Vesna (2010) Method for direct treatment of cork stoppers, using supercritical fluids. WO/2010/093273.
Narendra, K. and Limiti, E. and Paoloni, C. and Collantes, J. M. and Jansen, R. H. and Yarman, B. S. (2010) Vectorially combined distributed power amplifier with load pull impedance determination. Electronics Letters, 46 (16). pp. 1137-1138. ISSN 0013-5194
Narendra, K. and Limiti, E. and Paoloni, C. and Collantes, J.-M. and Jansen, R.H. (2010) Cascaded distributed power amplifier with non-identical transistors and inter-stage tapered impedance. In: Microwave Conference (EuMC), 2010 European :. IEEE, 990 -993. ISBN 978-1-4244-7232-1
Neelakantan, Suresh and Rivera-Díaz-Del-Castillo, Pedro E.J. and Van Der Zwaag, Sybrand (2010) Thermodynamic design of ultra-strong titanium alloys undergoing plasticity induced martensitic transformations. In: TMS 2010 - 139th Annual Meeting and Exhibition - Supplemental Proceedings :. UNSPECIFIED, USA, pp. 203-210. ISBN 9780873397537
Neelakantan, Suresh and Rivera-Díaz-del-Castillo, P. E J and Van Der Zwaag, Sybrand (2010) Design of titanium alloys showing plasticity induced transformation. In: THERMEC 2009 Supplement :. Advanced Materials Research, 89-91 . UNSPECIFIED, DEU, pp. 405-410. ISBN 0878492933
Nickson, I. D. and Boxall, C. and Jackson, A. and Whillock, G. O. H. (2010) A spectrophotometric study of cerium IV and chromium VI species in nuclear fuel reprocessing process streams. IOP Conference Series: Materials Science and Engineering, 9 (1): 012011. -. ISSN 1757-8981
Nickson, I. D. and Boxall, C. and Port, S. N. (2010) Interdigitated electrode array based sensors for environmental monitoring of caesium. IOP Conference Series: Materials Science and Engineering, 9 (1): 012044. -. ISSN 1757-8981
Nickson, Ian D. and Boxall, Colin and Jackson, Angela and Whillock, Guy O. H. (2010) The development of a method for the simultaneous measurement of cerium (iv) and chromium (vi) species in nitric acid media. In: ASME 12th International Conference on Environmental Remediation and Radioactive Waste Management (ICEM09) : Volume 1: Low/Intermediate-Level Waste Management; Spent Fuel, Fissile, Transuranic, High-Level Waste Management. AMER SOC MECHANICAL ENGINEERS, NEW YORK, pp. 163-169. ISBN 978-0-7918-4407-6
Nisar, Salman and Li, Lin and Sheikh, Mohammad A. and Pinkerton, Andrew J. (2010) The effect of continuous and pulsed beam modes on cut path deviation in diode laser cutting of glass. International Journal of Advanced Manufacturing Technology, 49 (1-4). pp. 167-175. ISSN 0268-3768
Nisar, Salman and Sheikh, M. A. and Li, Lin and Pinkerton, Andrew J. and Safdar, Shakeel (2010) The effect of laser beam geometry on cut path deviation in diode laser chip-free cutting of glass. Journal of Manufacturing Science and Engineering, 132 (1): 011002. ISSN 1087-1357
Papaioannou, E. H. and Liakopoulou-Kyriakides, M. (2010) Substrate contribution on carotenoids production in Blakeslea trispora cultivations. Food and Bioproducts Processing, 88 (2-3). pp. 305-311. ISSN 0960-3085
Pazooki, Alireza and Cao, Dongpu and Rakheja, Subhash and Boileau, Paul-Emile (2010) Experimental and analytical evaluations of a torsio-elastic suspension for off-road vehicles. SAE International Journal of Materials and Manufacturing, 3 (1). pp. 326-338. ISSN 1946-3979
Peyton, Anthony (2010) Non Contact Cable Testing. US7705606.
Pezaros, Dimitrios P. and Georgopoulos, Konstantinos and Hutchison, David (2010) High-speed, in-band performance measurement instrumentation for next generation IP networks. Computer Networks, 54 (18). pp. 3246-3263. ISSN 1389-1286
Pinkerton, A. J. (2010) Laser direct metal deposition : theory and applications in manufacturing and maintenance. In: Advances in laser materials processing : technology, research and applications. Woodhead Publishing Limited, Oxford. ISBN 9781845694746
Pinto, Domenico and Obayya, Salah (2010) Novel Dual-Mesh Finite Volume Time Domain Method for the Analysis of Photonic Crystal Based Devices. In: Semiconductor and Integrated Optoelectronics, SIOE 2010, 2010-03-29 - 2010-03-31.
Platt, S. P. and Prokofiev, A. V. and Xiao, Cai Xiao (2010) Fidelity of energy spectra at neutron facilities for single-event effects testing. In: 2010 IEEE International Reliability Physics Symposium, IRPS 2010 :. IEEE International Reliability Physics Symposium Proceedings . IEEE, CAN, pp. 411-416. ISBN 9781424454310
Polymeris, G. S. and Raptis, S. and Afouxenidis, D. and Tsirliganis, N. C. and Kitis, G. (2010) Thermally assisted OSL from deep traps in Al2O3:C. Radiation Measurements, 45 (3-6). pp. 519-522. ISSN 1350-4487
Qureshi, J. and Lam, D. and Ye, J. (2010) Finite element modelling of shear connection behaviour in a push test using profiled sheeting. In: Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010 :. CRC Press/Balkema, ZAF, pp. 679-682. ISBN 9780415584722
Rehman, S. and Movasaghi, Z. and Darr, J.A. and Rehman, I.U. (2010) Fourier transform infrared spectroscopic analysis of breast cancer tissues; Identifying differences between normal breast, invasive ductal carcinoma, and ductal carcinoma in situ of the breast. APPLIED SPECTROSCOPY REVIEWS, 45 (5). pp. 355-368. ISSN 0570-4928
Rennie, Allan and Jacobson, D.M (2010) Rapid design, prototyping and manufacturing. Virtual and Physical Prototyping, 5 (4). p. 181. ISSN 1745-2759
Rivera-Díaz-del-Castillo, P. E J and Xu, Wei and Van Der Zwaag, Sybrand (2010) Genetic alloy design of ultra high strength stainless steels : From thermodynamics to quantum mechanics. In: THERMEC 2009 :. Materials Science Forum, 638-64 (5). UNSPECIFIED, DEU, pp. 3473-3478. ISBN 0878492941
Roohpour, N. and Wasikiewicz, J.M. and Moshaverinia, A. and Paul, D. and Grahn, M.F. and Rehman, I.U. and Vadgama, P. (2010) Polyurethane membranes modified with isopropyl myristate as a potential candidate for encapsulating electronic implants: A study of biocompatibility and water permeability. Polymers, 2 (3). pp. 102-119. ISSN 2073-4360
Safargaleev, V. and Kozlovsky, A. and Honary, F. and Voronin, A. and Turunen, T. (2010) Geomagnetic disturbances on ground associated with particle precipitation during SC. Annales Geophysicae, 28 (1). pp. 247-265. ISSN 0992-7689
Salgado-Jimenez, T. and Gonzalez-Lopez, J. L. and Martinez-Soto, L. F. and Olguin-Lopez, E. and Resendiz-Gonzalez, P. A. and Bandala-Sanchez, M. (2010) Deep water ROV design for the Mexican oil industry. In: OCEANS'10 IEEE Sydney, OCEANSSYD 2010 :. OCEANS'10 IEEE Sydney, OCEANSSYD 2010 . UNSPECIFIED, AUS. ISBN 9781424452217
Selim, R and Pinto, Domenico and Obayya, Salah (2010) Improved Design of Photonic Crystal Based Multiplexer/Demultiplexer Devices. IET Optoelectronics, 4 (4). pp. 165-173. ISSN 1751-8768
Selim, Ramsey and Pinto, Domenico and Obayya, Salah (2010) Terahertz Ring Resonator Based Photonic Crystals. In: Optical Waveguide Theory and Numerical Modelling Workshop OWTNM 2010, 2010-04-09 - 2010-04-10.
Selim, Ramsey and Pinto, Domenico and Obayya, Salah (2010) Terahertz Ultra Fast Switching Device Based Photonic Crystals. In: Semiconductor and Integrated Optoelectronics, SIOE 2010, 2010-03-29 - 2010-03-31.
Sen, S. and Fukuyama, A. and Honary, F. (2010) Rayleigh Taylor instability in a dusty plasma. Journal of Atmospheric and Solar-Terrestrial Physics, 72 (13). pp. 938-942. ISSN 1364-6826
Sen, S. and McCarthy, D.R. and Lontano, M. and Lazzaro, E. and Honary, F. (2010) ITG modes in the presence of inhomogeneous field-aligned flow. Radiation Effects and Defects in Solids: Incorporating Plasma Science and Plasma Technology, 165 (2). pp. 180-186. ISSN 1042-0150
Shah, Kamran and Pinkerton, Andrew J. and Salman, Ahmad and Li, Lin (2010) Effects of Melt Pool Variables and Process Parameters in Laser Direct Metal Deposition of Aerospace Alloys. Materials and Manufacturing Processes, 25 (12). pp. 1372-1380. ISSN 1042-6914
Shanjani, Y. and Pinkerton, A.J. and Toyserkani, E. (2010) Selective laser sintering of calcium polyphosphate - Polyvinyl alcohol for biomedical applications. In: Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO) :. Laser Institute of America, pp. 489-494.
Sheng, Yong and Yang, Dongmin and Tan, Yuanqiang and Ye, Jianqiao (2010) Microstructure effects on transverse cracking in composite laminae by DEM. Composites Science and Technology, 70 (14). pp. 2093-2101. ISSN 0266-3538
Shippen, Alan and Joyce, Malcolm J. (2010) Profiling the depth of caesium-137 contamination in concrete via a relative linear attenuation model. Applied Radiation and Isotopes, 68 (4-5). pp. 631-634. ISSN 0969-8043
Shippen, David I. and Joyce, Malcolm J. and Aspinall, Michael (2010) A Wavelet Packet Transform Inspired Method of Neutron-Gamma Discrimination. IEEE Transactions on Nuclear Science, 57 (5). pp. 2617-2624. ISSN 0018-9499
Smith, Jeremy and Bashir, Aneeqa and Adamopoulos, George and Anthony, John E. and Bradley, Donal D. C. and Hamilton, R. and Heeney, Martin and McCulloch, Iain and Anthopoulos, Thomas D. (2010) Air-Stable Solution-Processed Hybrid Transistors with Hole and Electron Mobilities Exceeding 2 cm(2) V-1 s(-1). Advanced Materials, 22 (32). pp. 3598-3602. ISSN 0935-9648
Smith, Paul and Rennie, Allan (2010) Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials. In: 11th National Conference on Rapid Design, Prototyping and Manufacturing : Proceedings of. CRDM Ltd, GBR, pp. 55-61. ISBN 978-0-9566643-0-3
Smith, Paul and Rennie, Allan (2010) Computer aided material selection for additive manufacturing materials. Virtual and Physical Prototyping, 5 (4). pp. 209-213. ISSN 1745-2759
Smith, Paul and Rennie, Allan (2010) Using additive manufacturing effectively : a CAD tool to support decision making. In: 36th International MATADOR Conference :. Springer-Verlag, GBR, pp. 381-384. ISBN 978-1-84996-431-9
Sokolovskii, G. S. and Dudelev, V. V. and Losev, S. N. and Deryagin, A. G. and Vinokurov, D. A. and Lyutetskii, A. V. and Pikhtin, N. A. and Slipchenko, S. O. and Tarasov, I. S. and Zolotovskaya, Svetlana and Rafailov, E.U. and Kuchinskii, V. I. and Sibbett, W. (2010) Study of non-diffracting light beams from broad-stripe edge-emitting semiconductor lasers. Technical Physics Letters, 36 (1). pp. 9-12. ISSN 1063-7850
Song, Xubin and Cao, Dongpu (2010) Novel transmissibility shaping control of regenerative vehicle suspension systems. In: AMSE Int. Conference on Advanced Vehicle and Tire Technologies (AVTT 2010), 2010-08-15 - 2010-08-18.
Sá, Jacinto and Fernandes, Daniel Luis Abreu and Aiouache, Farid and Goguet, Alexandre and Hardacre, Christopher and Lundie, David and Naeem, Wasif and Partridge, William P and Stere, Cristina (2010) SpaciMS : spatial and temporal operando resolution of reactions within catalytic monoliths. Analyst, 135 (9). pp. 2260-2272. ISSN 0003-2654
Taylor, C. James and Chotai, Arun (2010) Nonlinear control by input-output pole assignment: state space derivation. In: UKACC International Conference Control 2010 :. UNSPECIFIED, pp. 1076-1081. ISBN 978-184600-0386
Taylor, C. James and Chotai, Arun and Robertson, David (2010) State dependent control of a robotic manipulator used for nuclear decommissioning activities. In: IEEE RSJ International Conference on Intelligent Robots and Systems IROS 2010 :. UNSPECIFIED, Taipei, Taiwan, pp. 2413-2418. ISBN 978-1-4244-6675-7
Taylor, C. James and Seward, D. (2010) Control of a dual-arm robotic manipulator. Nuclear Engineering International, 55 (673). pp. 24-26. ISSN 0029-5507
Taylor, C. James and Young, Peter C. (2010) Captain toolbox analysis of the hyperfast switching peltier cooling system benchmark. In: UKACC International Conference Control 2010 :. UNSPECIFIED, pp. 1082-1087. ISBN 978-184600-0386
Topakci, Mehmet and Celik, H Kursat and Canakci, Murad and Karayel, Davut and Rennie, Allan (2010) Structural optimisation of a subsoiler. Pakistan Journal of Scientific and Industrial Research, 53 (5). pp. 281-287. ISSN 0030-9885
Topakci, Mehmet and Celik, H Kursat and Canakci, Murad and Rennie, Allan and Akinci, Ibrahim and Karayel, Davut (2010) Deep tillage tool optimization by means of finite element method: Case study for a subsoiler tine. Journal of Food, Agriculture and Environment, 8 (2). pp. 531-536. ISSN 1459-0255
Tullet, P.F. and Honary, F. (2010) A null phase-difference technique for ULF wave direction-finding. Radiation Effects and Defects in Solids: Incorporating Plasma Science and Plasma Technology, 165 (2). pp. 187-191. ISSN 1042-0150
Turvey, Geoffrey (2010) Cross-stiffened circular plates: an elasto-plastic large deflection analysis. In: 10th International Conference on Computational Structures Technology (CST 2010), 2010-09-14 - 2010-09-17.
Turvey, Geoffrey (2010) Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams. In: 7th BSSM International Conference on Advances in Experimental Mechanics, 2010-09-07 - 2010-09-09.
Wang, H. and Davis, K. and Rimmer, R. and Tahir, I. and Dexter, A. C. and Burt, G. and Carter, R. G. (2010) Use of an injection locked magnetron to drive a superconducting RF cavity. In: IPAC 2010 - 1st International Particle Accelerator Conference :. IPAC 2010 - 1st International Particle Accelerator Conference . UNSPECIFIED, JPN, pp. 4026-4028. ISBN 9789290833529
Wang, Xiaodong and Li, M. and Li, S. and Wang, H. and Wang, S. and Ma, X. (2010) Hydrogen production by glycerol steam reforming with/without calcium oxide sorbent : A comparative study of thermodynamic and experimental work. Fuel Processing Technology, 91 (12). pp. 1812-1818. ISSN 0378-3820
Wang, Xiaodong and Wang, N. and Li, M. and Li, S. and Wang, S. and Ma, X. (2010) Hydrogen production by glycerol steam reforming with in situ hydrogen separation : A thermodynamic investigation. International Journal of Hydrogen Energy, 35 (19). pp. 10252-10256. ISSN 0360-3199
Wang, Xiaodong and Wang, N. and Zhao, J. and Wang, L. (2010) Thermodynamic analysis of propane dry and steam reforming for synthesis gas or hydrogen production. International Journal of Hydrogen Energy, 35 (23). pp. 12800-12807. ISSN 0360-3199
Weerasekera, Roshan and Grange, M. and Pamunuwa, Dinesh B. and Tenhunen, Hannu (2010) On signalling over through-silicon via (TSV) interconnects in 3-D integrated circuits. In: Design Automation and Test in Europe (DATE) Conference, 2010-01-01.
Widden, Martin and Gunn, Kester and Rennie, Allan (2010) Use of FDM in an undergraduate student project : design, build and test a model wind turbine. In: 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference :. DAAAM International. ISBN 978-3-901509-75-9
Wilbraham, R. J. and Boxall, C. and Taylor, R. J. (2010) Surface decontamination by photocatalysis. In: ASME 12th International Conference on Environmental Remediation and Radioactive Waste Management : Volume 2: Facility Decontamination and Decommissioning; Environmental Remediation; Environmental Management/Public Involvement. AMER SOC MECHANICAL ENGINEERS, NEW YORK, pp. 185-193. ISBN 978-0-7918-4408-3
Wild, P. and Honary, F. and Kavanagh, A.J. and Senior, A. (2010) Triangulating the height of cosmic noise absorption: A method for estimating the characteristic energy of precipitating electrons. Journal of Geophysical Research, 115 (A12326). pp. 1-11. ISSN 0148-0227
Wöbkenberg, Paul and Zimmerling, Tino and Bashir, Anneqa and Adamopoulos, George and Bradley, Donal and Anthopoulos, Thomas (2010) Solution Processed Ultra-violet Light Sensing ZnO Thin-film Transistors. In: MRS 2010 Spring Meeting, 2010-04-04.
Xu, W. and Rivera-Díaz-Del-Castillo, P. E.J. and Yan, W. and Yang, K. and San Martín, D. and Kestens, L. A.I. and Van Der Zwaag, S. (2010) A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates. Acta Materialia, 58 (11). pp. 4067-4075. ISSN 1359-6454
Xu, W. and Rivera-Díaz-del-Castillo, P. E J and Wang, W. and Yang, K. and Bliznuk, V. and Kestens, L. A I and van der Zwaag, S. (2010) Genetic design and characterization of novel ultra-high-strength stainless steels strengthened by Ni3Ti intermetallic nanoprecipitates. Acta Materialia, 58 (10). pp. 3582-3593. ISSN 1359-6454
Xu, Z. and Kotsov, Denis and Richardson, Andrew and Li, L. and Begbie, Mark (2010) Design and simulation of a multi-function MEMS sensor for health and usage monitoring. Proceedings of IEEE Prognostics & System Health Management Conference. pp. 1-7.
Xu, Z. and Richardson, A. and Koltsov, D. and Li, L. and Begbie, M. and Wang, C (2010) A multi-mode MEMS sensor design to support system test and health & usage monitoring applications. In: Test Symposium (ETS), 2010 15th IEEE European :. UNSPECIFIED, p. 263.
Yan, Y. and Zhang, Z. and Cheneler, D. and Stokes, J. R. and Adams, M. J. (2010) The influence of flow confinement on the rheological properties of complex fluids. Rheologica Acta, 49 (3). pp. 255-266. ISSN 0035-4511
Yang, Dongmin and Sheng, Yong and Ye, Jianqiao and Tan, Yuanqiang (2010) Discrete element modeling of the microbond test of fiber reinforced composite. Computational Materials Science, 49 (2). pp. 253-259. ISSN 0927-0256
Yang, Dongmin and Ye, Jianqiao and Tan, Y. Q. and Sheng, Y. (2010) Discrete Element Method Simulation of the Damage Evolution in Cross-Ply Laminate under Tensile Loading. In: The Tenth International Conference on Computational Structures Technology :. Civil-Comp Press, Stirling. ISBN 978-1905088386
Yang, Jian and Ye, Jianqiao (2010) An improved closed-form solution to interfacial stresses in plated beams using a two-stage approach. International Journal of Mechanical Sciences, 52 (1). pp. 13-30. ISSN 0020-7403
Ye, Fangwei and Mihalache, Dumitru and Hu, B. and Panoiu, Nicolae C. (2010) Subwavelength vortical plasmonic lattice solitons. Optics Letters, 36 (7). pp. 1179-1181. ISSN 0146-9592
Ye, Jianqiao and Lam, Dennis and Zhang, Daxu (2010) Initiation and propagation of transverse cracking in composite laminates. Computational Materials Science, 47 (4). pp. 1031-1039. ISSN 0927-0256
Yin, Zhihong and Khajepour, Amir and Cao, Dongpu and Ebrahimi, Babak and Guo, Konghui (2010) Experimental and analytical property characterization of a self-damped pneumatic suspension system. In: SAE ComVEC 2010, 2010-10-05 - 2010-10-06.
Young, Peter C. and Taylor, C. James and Tych, Wlodek and Pedregal, D. J. and McKenna, Paul G. (2010) The Captain Toolbox. Lancaster University, Lancaster.
Yu, Min and Zha, Xiaoxiong and Ye, Jianqiao (2010) The influence of joints and composite floor slabs on effective tying of steel structures in preventing progressive collapse. Journal of Constructional Steel Research, 66 (3). pp. 442-451. ISSN 0143-974X
Yu, Min and Zha, Xiaoxiong and Ye, Jianqiao and Li, Yi (2010) Fire responses and resistance of concrete-filled steel tubular frame structures. International Journal of Structural Stability and Dynamics, 10 (2). pp. 253-271. ISSN 0219-4554
Yu, Min and Zha, Xiaoxiong and Ye, Jianqiao and She, Chunyan (2010) A unified formulation for hollow and solid concrete-filled steel tube columns under axial compression. Engineering Structures, 32 (4). pp. 1046-1053. ISSN 0141-0296
Zanotto, Simone and Biasiol, Giorgio and Degl'Innocenti, Riccardo and Sorba, Lucia and Tredicucci, Alessandro (2010) Intersubband polaritons in a one-dimensional surface plasmon photonic crystal. Applied Physics Letters, 97 (23): 231123. ISSN 0003-6951
Zhang, Z. and Goodall, J.B.M. and Brown, S. and Karlsson, L. and Clark, R.J.H. and Hutchison, J.L. and Rehman, I.U. and Darr, J.A. (2010) Continuous hydrothermal synthesis of extensive 2D sodium titanate (Na 2Ti3O7) nano-sheets. Dalton Transactions, 39 (3). pp. 711-714. ISSN 1477-9226