Items where Department is "Engineering" and Year is 2015

Journal Article

UNSPECIFIED (2015) Selected papers from the Twelfth International Conference on Combustion and Energy Utilisation (12th ICCEU). Applied Energy, 156. 747–748. ISSN 0306-2619

Abdullah, Zulkeflee and Imran, Shahrul and Amran, Mohd and Hasib, Hazman and Muhammad, Nor Salim and Jaafar, Rosidah (2015) Development of database for checking fixtures for automotive parts. Applied Mechanics and Materials, 761. pp. 37-41. ISSN 1660-9336

Aboshio, Aaron and Green, Sarah and Ye, Jianqiao (2015) Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites. Composite Structures, 120. pp. 386-393. ISSN 0263-8223

Aboshio, Aaron and Green, Sarah and Ye, Jianqiao (2015) Structural performance assessment of a woven-fabric reinforced composite as applied in construction of inflatable offshore fender barrier structures. International Journal of Structural Stability and Dynamics, 15 (1): 1450036. ISSN 0219-4554

Abujnah, Nabeil and Letizia, Rosa and Alwafie, Fathi and Obayya, Salah (2015) Time Domain Modelling of Optical Add-drop filter based on Microcavity Ring Resonators. IOSR Journal of Electronics and Communication Engineering, 10 (6, Ver). pp. 77-87.

Adeleye, A.I. and Kellici, S. and Heil, T. and Morgan, D. and Vickers, M. and Saha, B. (2015) Greener synthesis of propylene carbonate using graphene-inorganic nanocomposite catalysts. Catalysis Today, 256 (2). pp. 347-357. ISSN 0920-5861

Adeniran, Ismail and Maclver, David H. and Garratt, Clifford J. and Ye, Jianqiao and Hancox, Jules C. and Zhang, Henggui (2015) Effects of persistent atrial fibrillation-induced electrical remodeling on atrial electro-mechanics – insights from a 3D model of the human atria. PLoS ONE, 10 (11): e0142397. ISSN 1932-6203

Afouxenidis, Dimitrios and Mazzocco, Riccardo and Vourlias, G. and Livesley, Peter and Krier, Anthony and Milne, W.I. and Kolosov, Oleg and Adamopoulos, George (2015) ZnO-based thin film transistors employing aluminum titanate gate dielectrics deposited by spray pyrolysis at ambient air. ACS Applied Materials and Interfaces, 7 (13). pp. 7334-7341. ISSN 1944-8244

Aggidis, Anthony and Newman, Jeffrey D. and Aggidis, George (2015) Investigating pipeline and state of the art blood glucose biosensors to formulate next steps. Biosensors and Bioelectronics, 74. pp. 243-262. ISSN 1873-4235

Ahmadizadeh, Saeed and Montazeri, Allahyar and Poshtan, Javad (2015) Design of minimax-linear quadratic Gaussian controller using the frequency domain subspace identified model of flexible plate. Journal of Vibration and Control, 21 (6). pp. 1115-1143. ISSN 1741-2986

Ajeel, Mohammed A. and Aroua, Mohamed Kheireddine and Daud, Wan Mohd Ashri Wan (2015) Preparation and characterization of carbon black diamond composite electrodes for anodic degradation of phenol. Electrochimica Acta, 153. pp. 379-384. ISSN 0013-4686

Ali, M.N. and Rehman, I.U. (2015) Auxetic polyurethane stents and stent-grafts for the palliative treatment of squamous cell carcinomas of the proximal and mid oesophagus : A novel fabrication route. Journal of Manufacturing Systems, 37 (1). pp. 375-395. ISSN 0278-6125

Alzahrani, Faris and Aldehani, Mohammed and Rusi, Hao and McMaster, Michael and Abreu Fernandes, Daniel Luis and Assabumrungrat, Suttichai and t Saoir, Meabh Nic An and Aiouache, Farid (2015) Gas flow visualisation in low aspect ratio packed beds by three-dimensional modelling and near-infrared tomography. Industrial and Engineering Chemistry Research, 54 (51). pp. 12714-12729. ISSN 0888-5885

Azam, M.T. and Khan, A.S. and Muzzafar, D. and Faryal, R. and Siddiqi, S.A. and Ahmad, R. and Chauhdry, A.A. and Rehman, I.U. (2015) Structural, surface, in vitro bacterial adhesion and biofilm formation analysis of three dental restorative composites. Materials, 8 (6). pp. 3221-3237. ISSN 1996-1944

Bagnato, G. and Iulianelli, A. and Vita, A. Vita and Italiano, C. and Laganà, M. and Fabiano, C. and Rossi, C. and Basile, A. and Calabria, University of (2015) Pure Hydrogen Production from Steam Reforming of Bio-Sources. International Journal of Membrane Science and Technology, 2 (2). pp. 48-56.

Balmer, Matthew and Gamage, Kelum and Taylor, Graeme (2015) Detecting energy dependent neutron capture distributions in a liquid scintillator. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 776. pp. 1-7. ISSN 0168-9002

Balmer, Matthew and Gamage, Kelum and Taylor, Graeme (2015) Neutron assay in mixed radiation fields with a 6Li-loaded plastic scintillator. Journal of Instrumentation, 10 (8): P08012. ISSN 1748-0221

Balmer, Matthew and Gamage, Kelum and Taylor, Graeme C. (2015) Comparative analysis of pulse shape discrimination methods in a 6Li loaded plastic scintillator. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 788. pp. 146-153. ISSN 0168-9002

Basile, A. and Curcio, S. and Bagnato, G. and Liguori, S. and Jokar, S.M. and Iulianelli, A. (2015) Water gas shift reaction in membrane reactors: Theoretical investigation by artificial neural networks model and experimental validation. International Journal of Hydrogen Energy, 40 (17). pp. 5897-5906. ISSN 0360-3199

Basile, A. and Palma, V. and Ruocco, C. and Bagnato, G. and Jokar, S.M. and Rahimpour, M.R. and Shariati, A. and Rossi, C. and Iulianelli, A. (2015) Pure Hydrogen Production via Ethanol Steam Reforming Reaction over a Novel Pt-Co Based Catalyst in a Dense Pd-Ag Membrane Reactor (An Experimental Study). International Journal of Membrane Science and Technology, 2 (1). pp. 5-14.

Beaumont, Jonathan and Villa, Mario and Mellor, Matthew and Joyce, Malcolm John (2015) High-intensity power-resolved radiation imaging of an operational nuclear reactor. Nature Communications, 6 (8592): 8592. ISSN 2041-1723

Beerthuis, Rolf and Granollers, Marta and Brown, D. Robert and Salavagione, Horacio J. and Rothenberg, Gadi and Shiju, N. Raveendran (2015) Catalytic acetoxylation of lactic acid to 2-acetoxypropionic acid, en route to acrylic acid. RSC Advances, 5 (6). pp. 4103-4108. ISSN 2046-2069

Beerthuis, Rolf and Rothenberg, Gadi and Raveendran, Shiju (2015) Catalytic Routes towards Acrylic Acid, Adipic Acid and ε-Caprolactam starting from Biorenewables. Green Chemistry, 17. pp. 1341-1361. ISSN 1463-9262

Bell, B. D. C. and Murphy, S. T. and Burr, P. A. and Grimes, R. W. and Wenman, M. R. (2015) Accommodation of tin in tetragonal ZrO2. Journal of Applied Physics, 117 (8): 084901. ISSN 0021-8979

Benzon, David and Zidonis, Audrius and Panagiotopoulos, Alexandros and Aggidis, George and Anagnostopoulos, Ioannis and Papantonis, Dimitrios (2015) Numerical investigation of the spear valve configuration on the performance of Pelton and Turgo turbine injectors and runners. Journal of Fluids Engineering, 137 (11): 111201. ISSN 0098-2202

Benzon, David and Zidonis, Audrius and Panagiotopoulos, Alexandros and Aggidis, George and Anagnostopoulos, John and Papantonis, Dimitrios (2015) Impulse turbine injector design improvement using Computational Fluid Dynamics. Journal of Fluids Engineering, 137 (4): 041106. ISSN 0098-2202

Bertolus, Marjorie and Freyss, Michel and Dorado, Boris and Martin, Guillaume and Hoang, Kiet and Maillard, Serge and Skorek, Richard and Garcia, Philippe and Valot, Carole and Chartier, Alain and Van Brutzel, Laurent and Fossati, Paul and Grimes, Robin W. and Parfitt, David C. and Bishop, Clare L. and Murphy, Samuel T. and Rushton, Michael J.D. and Staicu, Dragos and Yakub, Eugen and Nichenko, Sergii and Krack, Matthias and Devynck, Fabien and Ngayam-Happy, Raoul and Govers, Kevin and Deo, Chaitanya S. and Behera, Rakesh K. (2015) Linking atomic and mesoscopic scales for the modelling of the transport properties of uranium dioxide under irradiation. Journal of Nuclear Materials, 462. pp. 475-495. ISSN 0022-3115

Bhinder, Majid A. and Rahmati, M. T. and Mingham, Clive G. and Aggidis, George Athanasios (2015) Numerical hydrodynamic modelling of a pitching wave energy converter. European Journal of Computational Mechanics, 24 (4). pp. 129-143.

Bimbo, Nuno and Physick, Andrew J. and Noguera-Diaz, Antonio and Pugsley, Adam and Holyfield, Leighton T. and Ting, Valeska P. and Mays, Timothy J. (2015) High volumetric and energy densities of methane stored in nanoporous materials at ambient temperatures and moderate pressures. Chemical Engineering Journal, 272. pp. 38-47. ISSN 1385-8947

Bin Esro, Mazran and Mazzocco, Riccardo and Vourlias, G. and Kolosov, Oleg and Milne, W.I. and Adamopoulos, George (2015) Solution processed lanthanum aluminate gate dielectrics for use in metal oxide-based thin film transistors. Applied Physics Letters, 106: 203507. ISSN 0003-6951

Bin Esro, Mazran and Vourlias, G. and Somerton, Christopher and Milne, William I. and Adamopoulos, George (2015) High-mobility ZnO thin film transistors based on solution-processed hafnium oxide gate dielectrics. Advanced Functional Materials, 25 (1). pp. 134-141. ISSN 1616-301X

Boon-anuwat, Natja-nan and Kiatkittipong, Worapon and Aiouache, Farid and Assabumrungrat, Suttichai (2015) Process design of continuous biodiesel production by reactive distillation : comparison between homogeneous and heterogeneous catalysts. Chemical Engineering and Processing: Process Intensification, 92. pp. 33-44. ISSN 0255-2701

Borodachenkova, M. and Barlat, F. and Wen, W. and Bastos, A. and Grácio, J.J. (2015) A microstructure-based model for describing the material properties of Al-Zn alloys during high pressure torsion. International Journal of Plasticity, 68. pp. 150-163. ISSN 0749-6419

Borodachenkova, M. and Wen, W. and Barlat, F. and Pereira, A. and Grácio, J. (2015) Modeling of the mechanical behavior and texture evolution in Zn alloys during reverse shear loading. Journal of Materials Processing Technology, 224. pp. 143-148. ISSN 0924-0136

Brocklehurst, Paul and Adeniran, Ismail and Yang, Dongmin and Sheng, Yong and Zhang, Henggui and Ye, Jianqiao (2015) A 2D Electromechanical Model of Human Atrial Tissue Using the Discrete Element Method. Biomed Research International, 2015: 854953. ISSN 2314-6133

Brocklehurst, Paul and Adeniran, Ismail and Yang, Dongmin and Sheng, Yong and Zhang, Hengui and Ye, Jianqiao (2015) A 2D electro-mechanical model of human atrial tissue using the discrete element method. Biomed Research International, 2015: 854953. ISSN 2314-6133

Brocklehurst, Paul R and Mackay, Laura and Goldthorpe, Joanna and Pretty, Iain (2015) Older people and oral health : setting a patient-centred research agenda. Gerodontology, 32 (3). pp. 222-228.

Bromley, Michael A. and Boxall, Colin (2015) A study of cerium extraction by TBP and TODGA using a rotating diffusion cell. Nukleonika, 60 (4). pp. 859-864. ISSN 0029-5922

Butler-Smith, P. W. and Axinte, D. A. and Daine, M. and Kennedy, A. R. and Harper, L. T. and Bucourt, J. F. and Ragueneau, R. (2015) A study of an improved cutting mechanism of composite materials using novel design of diamond micro-core drills. International Journal of Machine Tools and Manufacture, 88. pp. 175-183. ISSN 0890-6955

Castaldo, C. and Di Siena, A. and Fedele, R. and Napoli, Francesco and Amicucci, L. and Cesario, R. and Schettini, G. (2015) Influence of collisions on parametric instabilities induced by lower hybrid waves in tokamak plasmas. Nuclear Fusion, 56 (1): 016003. ISSN 0029-5515

Celik, Kursat and Karayel, Davut and Lupeanu, Mihaela and Rennie, Allan Edward Watson and Akinci, Ibrahim (2015) Determination of head losses in drip irrigation laterals with cylindrical in-line type emitters through CFD analysis. Bulgarian Journal of Agricultural Science, 21 (3). pp. 703-710. ISSN 1310-0351

Chatterton, J. and Unwin, S. and Rehman, I.U. and Bridson-Walton, J.M. (2015) Successful surgical treatment of obstructive liver disease caused by a biliary calculus in a captive Chimpanzee (Pan Troglodytes). Journal of Zoo and Wildlife Medicine, 46 (4). pp. 925-928. ISSN 1042-7260

Cheneler, David and Ward, Michael C L (2015) Power output and efficiency of beta-emitting microspheres. Radiation Physics and Chemistry, 106. pp. 204-212. ISSN 0969-806X

Childs, D.T.D. and Hogg, R.A. and Revin, D.G. and Rehman, I.U. and Cockburn, J.W. and Matcher, S.J. (2015) Sensitivity Advantage of QCL Tunable-Laser Mid-Infrared Spectroscopy over FTIR Spectroscopy. APPLIED SPECTROSCOPY REVIEWS, 50 (10). pp. 822-839. ISSN 0570-4928

Cooper, M. W. D. and Murphy, S. T. and Rushton, M. J. D. and Grimes, R. W. (2015) Thermophysical properties and oxygen transport in the (U-x,Pu1-x)O-2 lattice. Journal of Nuclear Materials, 461. pp. 206-214. ISSN 0022-3115

Cross, Philip and Ma, Xiandong (2015) Model-based and fuzzy logic approaches to condition monitoring of operational wind turbines. International Journal of Automation and Computing, 12 (1). pp. 25-34. ISSN 1476-8186

Cumming, Denis and Tumilson, Christopher and Taylor, Rebecca and Chansai, Sarayute and Call, Ann and Jacquemin, Johan and Hardacre, Christopher and Elder, Rachael (2015) Development of a diffuse reflectance infrared fourier transform spectroscopy (DRIFTS) cell for the in situ analysis of co-electrolysis in a solid oxide cell. Faraday Discussions, 182 (97): 182. pp. 97-111. ISSN 1359-6640

Currie, Magnus and Saafi, Mohamed and Tachtatzis, Christos and Quail, Francis (2015) Structural integrity monitoring of onshore wind turbine concrete foundations. Renewable Energy, 83. pp. 1131-1138. ISSN 0960-1481

Dawson, Richard and Patel, Anant and Rennie, Allan and White, Simon (2015) An investigation into the use of additive manufacture for the production of metallic bipolar plates for polymer electrolyte fuel cell stacks. Journal of Applied Electrochemistry, 45 (7). pp. 637-645. ISSN 0021-891X

Degl'Innocenti, Riccardo and Shah, Y. D. and Masini, L. and Ronzani, A. and Pitanti, A. and Ren, Y. and Jessop, D. S. and Tredicucci, A. and Beere, H. E. and Ritchie, D. A. (2015) THz quantum cascade lasers based on a hyperuniform design. Proceedings of SPIE, 9370: 93700A. ISSN 0277-786X

Degl'Innocenti, Riccardo and Shah, Yash D. and Wallis, Robert and Klimont, Adam and Ren, Yuan and Jessop, David S. and Beere, Harvey E. and Ritchie, David A. (2015) A hybrid plasmonic waveguide terahertz quantum cascade laser. Applied Physics Letters, 106 (8): 082101. ISSN 0003-6951

Dinesh, K. K. J. Ranga and van Oijen, J.A. and Luo, Kai H and Jiang, Xi (2015) Nitric oxide pollutant formation in high hydrogen content (HHC) syngas flames. International Journal of Hydrogen Energy, 40 (39). pp. 13621-13634. ISSN 0360-3199

Farooq, A. and Yar, M. and Khan, A.S. and Shahzadi, L. and Siddiqi, S.A. and Mahmood, N. and Rauf, A. and Qureshi, Z.-U.-A. and Manzoor, F. and Chaudhry, A.A. and Ur Rehman, I. (2015) Synthesis of piroxicam loaded novel electrospun biodegradable nanocomposite scaffolds for periodontal regeneration. Materials Science and Engineering: A, 56. pp. 104-113. ISSN 0921-5093

Fischer, Marc and Jiang, Xi (2015) Numerical optimisation for model evaluation in combustion kinetics. Applied Energy, 156. 793–803. ISSN 0306-2619

Fischer, Marc and Jiang, Xi (2015) An investigation of the chemical kinetics of biogas combustion. Fuel, 150. pp. 711-720. ISSN 0016-2361

Galindo-Nava, E. I. and Rivera-Díaz-Del-Castillo, P. E.J. (2015) A model for the microstructure behaviour and strength evolution in lath martensite. Acta Materialia, 98: 12267. pp. 81-93. ISSN 1359-6454

Galindo-Nava, E. I. and Torres-Villaseñor, G. and Rivera-Díaz-Del-Castillo, P. E J (2015) Engineering grain boundary sliding and cavitation effects in superplastic alloys employing thermodynamics. Materials Science and Technology (United Kingdom), 31 (6). pp. 677-687. ISSN 0267-0836

Gamage, Kelum and Taylor, Graeme (2015) Neutron gamma fraction imaging : detection, location and identification of neutron sources. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 788. pp. 9-12. ISSN 0168-9002

Gelazanskas, Linas and Akurugoda Gamage, Kelum (2015) Forecasting hot water consumption in residential houses. Energies, 8 (11). 12702–12717. ISSN 1996-1073

Gigot, Arnaud and Sangermano, Marco and Capozzi, Luigi Carlo and Dietliker, Kurt (2015) In-situ synthesis of organic-inorganic coatings via a photolatent base catalyzed Michael-addition reaction. Polymer, 68. pp. 195-201. ISSN 0032-3861

Greco, Angelo and Jiang, Xi and Cao, Dongpu (2015) An investigation of lithium-ion battery thermal management using paraffin/porous-graphite-matrix composite. Journal of Power Sources, 278. 50–68.

Gupta, G. and Iqbal, P. and Yin, F. and Liu, J. and Palmer, R. E. and Sharma, S. and Leung, K. Cham-Fai and Mendes, P. M. (2015) Pt Diffusion Dynamics for the Formation Cr–Pt Core–Shell Nanoparticles. Langmuir, 31. 6917–6923. ISSN 0743-7463

Haider, W. and Hayat, A. and Raza, Y. and Anwar Chaudhry, A. and Rehman, I.-U. and Marty, J.L. (2015) Gold nanoparticle decorated single walled carbon nanotube nanocomposite with synergistic peroxidase like activity for d-alanine detection. RSC Advances, 5 (32). pp. 24853-24858. ISSN 2046-2069

Hao, Y. and Wang, Xiaodong and Perret, N. and Cárdenas-Lizana, Fernando and Keane, Mark A. (2015) Support effects in the gas phase hydrogenation of butyronitrile over palladium. Catalysis, Structure and Reactivity, 1 (1). pp. 4-10. ISSN 2055-0758

Hasib, Hazman and Harrysson, Ola L.A. and West, Harvey A. (2015) Powder removal from Ti-6Al-4V cellular structures fabricated via electron beam melting. JOM Journal of the Minerals, Metals and Materials Society, 67 (3). pp. 639-646. ISSN 1047-4838

Hasib, Hazman and Rennie, Allan and Burns, Neil and Geekie, Louise (2015) Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing. Filtration, 15 (3). pp. 174-180. ISSN 1479-0602

Hernandez-Mejia, Carlos and Gnanakumar, Edwin S. and Olivos-Suarez, Alma and Gascon, Jorge and Greer, Heather F. and Zhou, Wuzong and Rothenberg, Gadi and Raveendran Shiju, N. (2015) Ru/TiO2-catalysed hydrogenation of xylose : the role of the crystal structure of the support. Catalysis Science and Technology, 6 (2). pp. 577-582. ISSN 2044-4753

Hou, Xiaonan and Hu, Hong (2015) A novel 3D composite structure with tunable Poisson's ratio and stiffness. physica status solidi (b), 252 (7). 1565–1574. ISSN 0370-1972

Ismail, Yaser and Sheng, Yong and Yang, Dongmin and Ye, Jianqiao (2015) Discrete element modelling of unidirectional fibre-reinforced polymers under transverse tension. Composites Part B: Engineering, 73. pp. 118-125. ISSN 1359-8368

Jacobs, William R and Wilson, Emma Denise and Assaf, Tareq and Rossiter, Jonathan and Dodd, Tony J and Porrill, John and Anderson, Sean R (2015) Control-focused, nonlinear and time-varying modelling of dielectric elastomer actuators with frequency response analysis. Smart Materials and Structures, 24 (5): 055002. ISSN 0964-1726

Jia, Jiangang and Siddiq, Abdur R. and Kennedy, Andrew R. (2015) Porous titanium manufactured by a novel powder tapping method using spherical salt bead space holders: characterisation and mechanical properties. Journal of the Mechanical Behavior of Biomedical Materials, 48. pp. 229-240. ISSN 1751-6161

Jiang, Jieyu and Jiang, Xi and Zhu, Min (2015) A computational study of preferential diffusion and scalar transport in nonpremixed hydrogen-air flame. International Journal of Hydrogen Energy, 40 (45). pp. 15709-15722. ISSN 0360-3199

Junginger, T. (2015) Field dependent surface resistance of niobium on copper cavities. Physical Review Special Topics - Accelerators and Beams, 18 (7): 072001. ISSN 1098-4402

Kaleem, M. and Khan, A.S. and Rehman, I.U. and Wong, F.S. (2015) Effect of beverages on viscoelastic properties of resin-based dental composites. Materials, 8 (6). pp. 2863-2872. ISSN 1996-1944

Kaltsa, A. and Papaliaga, D. and Papaioannou, E. and Kotzekidou, P. (2015) Characteristics of oleuropeinolytic strains of Lactobacillus plantarum group and influence on phenolic compounds in table olives elaborated under reduced salt conditions. Food Microbiology, 48. pp. 58-62. ISSN 0740-0020

Kang, Jee Hyun and Hosseinkhani, Babak and Vegter, Reinder H. and Rivera-Díaz-Del-Castillo, Pedro E.J. (2015) Modelling dislocation assisted tempering during rolling contact fatigue in bearing steels. International Journal of Fatigue, 75. pp. 115-125. ISSN 0142-1123

Kannan, R. and Silva, A. A. and Cardoso, F. M. and Gupta, G. and Aslam, Z. and Sharma, S. and Steinberger-Wilckens, R. (2015) Study of FePt deposited reduced graphene oxide's utility as a catalyst towards oxygen reduction and methanol oxidation reactions. RSC Advances (46). pp. 36993-36998. ISSN 2046-2069

Kastiukas, Gediminas and Zhou, Xiangming and Castro-Gomes, João and Huang, Shifeng and Saafi, Mohamed Ben Salem (2015) Effects of lactic and citric acid on early-age engineering properties of Portland/calcium aluminate blended cements. Construction and Building Materials, 101 (1). pp. 389-395. ISSN 0950-0618

Kaufman, John and Rennie, Allan and Clement, M. (2015) Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art. Journal of Computing and Information Science in Engineering, 15 (1): 011006. ISSN 1530-9827

Kaufman, John and Rennie, Allan Edward Watson (2015) The lost crown of Horus. Ancient Egypt, 15 (5). pp. 22-23. ISSN 1470-9990

Kaufman, John and Rennie, Allan Edward Watson and Clement, Morag (2015) Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artifacts. Procedia CIRP, 36. pp. 223-229. ISSN 2212-8271

Khan, A.F. and Afzal, A. and Chaudhary, A.A. and Saleem, M. and Shahzadi, L. and Jamal, A. and Yar, M. and Habib, A. and Rehman, I.U. (2015) (Hydroxypropyl)methylcellulose mediated synthesis of highly porous composite scaffolds for trabecular bone repair applications. Science of Advanced Materials, 7 (6). pp. 1177-1186. ISSN 1947-2935

Khan, A.S. and Azam, M.T. and Khan, M. and Mian, S.A. and Rehman, I.U. (2015) An update on glass fiber dental restorative composites: A systematic review. Materials Science and Engineering: A, 47. pp. 26-39. ISSN 0921-5093

Koettig, T. and Peters, B. J. and Avellino, S. and Junginger, T. and Bremer, J. (2015) Study of temperature wave propagation in superfluid helium focusing on radio-frequency cavity cooling. IOP Conference Series: Materials Science and Engineering, 101 (1): 012164. ISSN 1757-8981

Kolosov, Oleg Victor and Boxall, Colin and Man, Sparkle (2015) Pure Test 5.5.3. ACS Applied Materials and Interfaces. ISSN 1944-8244 (In Press)

Konstantinidis, Konstantinos and Feresidis, Alexandros P. and Tian, Yingtao and Shang, Xiaobang and Lancaster, Michael J. (2015) Micromachined terahertz Fabry-Perot cavity highly directive antennas. IET Microwaves, Antennas and Propagation, 9 (13). pp. 1436-1443. ISSN 1751-8733

Kumar, G.S. Vinod and García-Moreno, Francisco and Banhart, John and Kennedy, Andrew R. (2015) The stabilising effect of oxides in foamed aluminium alloy scrap. International Journal of Materials Research, 106 (9). pp. 978-987.

Lang, Peter and Rath, Markus and Kozeschnik, Ernst and Rivera-Diaz-Del-Castillo, Pedro E.J. (2015) Modelling the influence of austenitisation temperature on hydrogen trapping in Nb containing martensitic steels. Scripta Materialia, 101. pp. 60-63. ISSN 1359-6462

Langston, Paul and Kennedy, Andrew R. and Constantin, Hannah (2015) Discrete element modelling of flexible fibre packing. Computational Materials Science, 96 (A). pp. 108-116. ISSN 0927-0256

Letizia, Rosa and Mineo, Mauro and Paoloni, Claudio (2015) Photonic crystal-structures for THz vacuum electron devices. IEEE Transactions on Electron Devices, 62 (1). pp. 178-183. ISSN 0018-9383

Li, Didi and Jiang, Xi and Meng, Qingliang and Xie, Qiyuan (2015) Numerical analyses of the effects of nitrogen on the dissolution trapping mechanism of carbon dioxide geological storage. Computers and Fluids, 114. pp. 1-11. ISSN 0045-7930

Li, S. and Honarmandi, P. and Arróyave, R. and Rivera-Diaz-Del-Castillo, P. E.J. (2015) Describing the deformation behaviour of TRIP and dual phase steels employing an irreversible thermodynamics formulation. Materials Science and Technology (United Kingdom), 31 (13b). pp. 1658-1663. ISSN 0267-0836

Li, Xiang and Lang, Jiandong and Alfadhl, Yasir and Chen, Xiaodong (2015) Study of an eighth-harmonic large-orbit gyrotron in the terahertz band. IEEE Transactions on Plasma Science, 43 (2). pp. 506-514. ISSN 0093-3813

Lin, Hungyen and Dong, Yue and Shen, Yaochun and Zeitler, J. Axel (2015) Quantifying pharmaceutical film coating with optical coherence tomography and terahertz pulsed imaging : an evaluation. Journal of Pharmaceutical Sciences, 104 (10). pp. 3377-3385. ISSN 0022-3549

Lin, Hungyen and May, Robert K. and Evans, Michael J. and Zhong, Shuncong and Gladden, Lynn F. and Shen, Yaochun and Zeitler, J. Axel (2015) Impact of processing conditions on inter-tablet coating thickness variations measured by terahertz in-line sensing. Journal of Pharmaceutical Sciences, 104 (8). pp. 2513-2522. ISSN 0022-3549

Lin, Xi and Kennedy, Andrew R. (2015) Structure-property-processing relationships for stainless steel foams made by mechanical aeration of powder slurries. Advanced Engineering Materials, 17 (6). pp. 839-845. ISSN 1438-1656

Liskova, Jana and Bacakova, Lucie and Skwarczynska, Agata L. and Musial, Olga and Bliznuk, Vitaliy and De Schamphelaere, Karel and Modrzejewska, Zofia and Douglas, Timothy E. L. (2015) Development of Thermosensitive Hydrogels of Chitosan, Sodium and Magnesium Glycerophosphate for Bone Regeneration Applications. Journal of Functional Biomaterials, 6 (2). pp. 192-203. ISSN 2079-4983

Liskova, Jana and Douglas, Timothy E. L. and Beranova, Jana and Skwarczynska, Agata and Bozic, Mojca and Samal, Sangram Keshari and Modrzejewska, Zofia and Gorgieva, Selestina and Kokol, Vanja and Bacakova, Lucie (2015) Chitosan hydrogels enriched with polyphenols : Antibacterial activity, cell adhesion and growth and mineralization. Carbohydrate Polymers, 129. pp. 135-142. ISSN 0144-8617

M'Guil, S. and Wen, W. and Ahzi, S. and Gracio, J.J. and Davies, R.W. (2015) Analysis of shear deformation by slip and twinning in low and high/medium stacking fault energy fcc metals using the φ-model. International Journal of Plasticity, 68. pp. 132-149. ISSN 0749-6419

Ma, Xiandong and Briddon, Martin (2015) New software aims to improve fuel efficiency. SAFETY4SEA.

Ma, Xiandong and Briddon, Martin (2015) New software aims to improve fuel efficiency, reduce unnecessary maintenance. Ship & Bunker - The World's Most Read Publication for the Marine Fuels Industry.

Ma, Xiandong and Briddon, Martin (2015) University collaboration improves Mimic condition monitoring. The Motorship Magazine - insight for marine technology professionals.

Mazzocco, Riccardo and Robinson, Benjamin and Rabot, Caroline and Delamoreanu, A. and Zenasni, Aziz and Dickinson, James and Boxall, Colin and Kolosov, Oleg (2015) Surface and interfacial interactions of multilayer graphitic structures with local environment. Thin Solid Films, 585. pp. 31-39. ISSN 0040-6090

Mbeleck, R. and Mohammed, M.L. and Ambroziak, K. and Sherrington, D.C. and Saha, B. (2015) Efficient epoxidation of cyclododecene and dodecene catalysed by polybenzimidazole supported Mo(VI) complex. Catalysis Today, 256 (2). pp. 287-293. ISSN 0920-5861

Meng, Qianliang and Jiang, Xi and Li, Didi and Xie, Qiyuan (2015) Numerical simulations of pressure build up and salt precipitation during carbon dioxide storage in saline aquifers. Computers and Fluids, 121. pp. 92-101. ISSN 0045-7930

Mohammed, M.L. and Mbeleck, R. and Patel, D. and Niyogi, D. and Sherrington, D.C. and Saha, B. (2015) Greener and efficient epoxidation of 4-vinyl-1-cyclohexene with polystyrene 2-(aminomethyl)pyridine supported Mo(VI) catalyst in batch and continuous reactors. Chemical Engineering Research and Design, 94. pp. 194-203. ISSN 0263-8762

Mohammed, M.L. and Mbeleck, R. and Saha, B. (2015) Efficient and selective molybdenum based heterogeneous catalyst for alkene epoxidation using batch and continuous reactors. Polymer Chemistry, 6 (41). pp. 7308-7319. ISSN 1759-9954

Mohammed, ML and Mbeleck, R and Saha, B (2015) Efficient and selective polymer supported Mo(VI) catalyst for alkene epoxidation in batch and continuous reactors. Polymer Chemistry, 6 (41). pp. 7308-7319. ISSN 1759-9954

Monk, Stephen and Abram, Tom and Joyce, Malcolm (2015) Characterisation of the TRIUMF neutron facility using a Monte Carlo simulation code. Radiation Protection Dosimetry, 164 (3). pp. 228-238. ISSN 1742-3406

Montoya, Carmen A. and B. Paninho, Ana and Pedro M., Felix and Zakrzewska, Malgorzata E. and Joaquim, Vital and Najdanovic-Visak, Vesna and Nunes, Ana V.M. (2015) Styrene carbonate synthesis from CO2 using tetrabutylammonium bromide as a non-supported heterogeneous catalyst phase. Journal of Supercritical Fluids, 100. pp. 155-159. ISSN 0896-8446

Murphy, Samuel T. and Daraszewicz, Szymon L. and Giret, Yvelin and Watkins, Matthew and Shluger, Alexander L. and Tanimura, Katsumi and Duffy, Dorothy M. (2015) Dynamical simulations of an electronically induced solid-solid phase transformation in tungsten. Physical review B, 92 (13): 134110. ISSN 1098-0121

Nelson, Jack A. and Rennie, Allan and Abram, Tom and Bennett, Graham R. and Adiele, Alex and Tripp, Mathew and Wood, Martyn and Galloway, Gregory (2015) Effect of process conditions on temperature distribution in the powder bed during laser sintering of polyamide-12. Journal of Thermal Engineering, 1 (3). pp. 159-165. ISSN 2148-7847

Nicholls, Keith W. and Corr, Hugh F.J. and Stewart, Craig L. and Lok, Lai Bun and Brennan, Paul V. and Vaughan, David G. (2015) Instruments and methods : A ground-based radar for measuring vertical strain rates and time-varying basal melt rates in ice sheets and shelves. Journal of Glaciology, 61 (230). pp. 1079-1087. ISSN 0022-1430

Noguera-Diaz, Antonio and Marques Dos Santos Bimbo, Nuno and Holyfield, Leighton T. and Ahmet, Ibbi and Ting, Valeska P. and Mays, Timothy J. (2015) Structure-property relationships in metal-organic frameworks for hydrogen storage. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 496. pp. 77-85. ISSN 0927-7757

Odijie, Charles and Ye, Jianqiao (2015) Effect of vortex induced vibration on a paired column semi-submersible platform. International Journal of Structural Stability and Dynamics, 15 (8). ISSN 0219-4554

Odijie, Charles and Ye, Jianqiao (2015) Effect of vortex induced vibration on a paired-column semisubmersible platform. International Journal of Structural Stability and Dynamics, 15 (8): 1540019. ISSN 0219-4554

Oun, Hatem and Kennedy, Andrew R. (2015) Tailoring the pressure-drop in multi-layered open-cell porous inconel structures. Journal of Porous Materials, 22 (6). pp. 1627-1633. ISSN 1573-4854

Panagiotopoulos, Alexandros and Zidonis, Audrius and Aggidis, George and Anagnostopoulos, Ioannis and Papantonis, Dimitris (2015) Flow modeling in Pelton turbines by an accurate Eulerian and a fast Lagrangian evaluation method. International Journal of Rotating Machinery: 679576. ISSN 1023-621X

Paoloni, Claudio and Mineo, Mauro and Henry, Manju and Huggard, Peter G (2015) Double corrugated waveguide for Ka-Band traveling wave tube. IEEE Transactions on Electron Devices, 62 (11). pp. 3851-3856. ISSN 0018-9383

Parker, Helen and Joyce, Malcolm (2015) The use of ionising radiation to image nuclear fuel : a review. Progress in Nuclear Energy, 85. pp. 297-318. ISSN 0149-1970

Patel, Anant and Dawson, Richard (2015) Recovery of platinum group metal value via potassium iodide leaching. Hydrometallurgy, 157. pp. 219-225. ISSN 0304-386X

Perry, Marcus and Saafi, Mohamed and Fusiek, Gregory and Niewczas, Pawel (2015) Hybrid optical-fibre/geopolymer sensors for structural health monitoring of concrete structures. Smart Materials and Structures, 24 (4): 045011. ISSN 0964-1726

Pinkerton, Andrew (2015) Advances in the modelling of laser direct metal deposition (invited). Journal of Laser Applications, 27 (S1): S15001. ISSN 1042-346X

Qasim, S.B. and Delaine-Smith, R.M. and Fey, T. and Rawlinson, A. and Rehman, I.U. (2015) Freeze gelated porous membranes for periodontal tissue regeneration. Acta Biomaterialia, 23. pp. 317-328. ISSN 1742-7061

Rafique, Asia and Raza, Rizwan and Akram, Nadeem and Ullah, M.Kaleem and Ali, Amjad and Irshad, Muneeb and Siraj, Khurram and Khan, M. Ajmal and Zhu, Bin and Dawson, Richard James (2015) Significance enhancement in the conductivity of core shell nanocomposite electrolytes. RSC Advances, 2015 (105). pp. 86322-86329. ISSN 2046-2069

Ramakrishaniah, R. and Al Kheraif, A.A. and Elsharawy, M.A. and Alsaleh, A.K. and Ismail Mohamed, K.M. and Rehman, I.U. (2015) A comparative finite elemental analysis of glass abutment supported and unsupported cantilever fixed partial denture. Dental Materials, 31 (5). pp. 514-521. ISSN 0109-5641

Ramakrishnaiah, R. and Rehman, G.U. and Basavarajappa, S. and Al Khuraif, A.A. and Durgesh, B.H. and Khan, A.S. and Rehman, I.U. (2015) Applications of Raman spectroscopy in dentistry : Analysis of tooth structure. APPLIED SPECTROSCOPY REVIEWS, 50 (4). pp. 332-350. ISSN 0570-4928

Rauff-Nisthar, Nadya and Boxall, Colin and Hambley, David and Hiezl, Zoltan and Padovani, Cristiano and Wilbraham, Richard (2015) Corrosion behaviour of AGR SIMFUELS. ECS Transactions, 66 (17). pp. 85-94. ISSN 1938-6737

Ren, Yuan and Wallis, Robert and Jessop, David Stephen and Degl'Innocenti, Riccardo and Klimont, Adam and Beere, Harvey E. and Ritchie, David A. (2015) Fast terahertz imaging using a quantum cascade amplifier. Applied Physics Letters, 107 (1): 011107. ISSN 0003-6951

Saada, R. and Kellici, S. and Heil, T. and Morgan, D. and Saha, B. (2015) Greener synthesis of dimethyl carbonate using a novel ceria-zirconia oxide/graphene nanocomposite catalyst. Applied Catalysis B: Environmental, 168-16. pp. 353-362. ISSN 0926-3373

Saada, R. and Patel, D. and Saha, B. (2015) Causes and consequences of thermal runaway incidents - Will they ever be avoided? Process Safety and Environmental Protection, 97. pp. 109-115. ISSN 0957-5820

Saafi, Mohamed and Tang, Leung and Fung, Jason and Rahman, Mahbubur and Liggat, John (2015) Enhanced properties of graphene/fly ash geopolymeric composite cement. Cement and Concrete Research, 67. pp. 292-299. ISSN 0008-8846

Shah, A.T. and Ain, Q. and Chaudhry, A.A. and Khan, A.F. and Iqbal, B. and Ahmad, S. and Siddiqi, S.A. and Rehman, I. (2015) A study of the effect of precursors on physical and biological properties of mesoporous bioactive glass. Journal of Materials Science, 50 (4). pp. 1794-1804. ISSN 0022-2461

Sharpe, Jessica E. and Bimbo, Nuno and Ting, Valeska P. and Rechain, Bruno and Joubert, Emmanuel and Mays, Timothy J. (2015) Modelling the potential of adsorbed hydrogen for use in aviation. Microporous and Mesoporous Materials, 209. pp. 135-140. ISSN 1387-1811

Sharples, Emmy and Letizia, Rosa (2015) Electron beam excitation of CSRR loaded waveguide for Cherenkov radiation. Proceedings of SPIE, 9544: 95442L. ISSN 0277-786X

Sheraz, M.A. and Ahmed, S. and Rehman, I.U. (2015) Effect of pH, polymer concentration and molecular weight on the physical state properties of tolfenamic acid. Pharmaceutical Development and Technology, 20 (3). pp. 352-360. ISSN 1083-7450

Siddiq, Abdur R. and Kennedy, Andrew R. (2015) Porous poly-ether ether ketone (PEEK) manufactured by a novel powder route using near-spherical salt bead porogens : characterisation and mechanical properties. Materials Science and Engineering: C, 47. pp. 180-188. ISSN 0928-4931

Sotayo, Adeayo and Green, Sarah and Turvey, Geoffrey (2015) Carpet recycling : a review of recycled carpets for structural composites. Environmental Technology and Innovation, 3. pp. 97-107. ISSN 2352-1864

Talari, A.C.S. and Evans, C.A. and Holen, I. and Coleman, R.E. and Rehman, I.U. (2015) Raman spectroscopic analysis differentiates between breast cancer cell lines. Journal of Raman Spectroscopy, 46 (5). pp. 421-427. ISSN 0377-0486

Talari, A.C.S. and Movasaghi, Z. and Rehman, S. and Rehman, I.U. (2015) Raman spectroscopy of biological tissues. APPLIED SPECTROSCOPY REVIEWS, 50 (1). pp. 46-111. ISSN 0570-4928

Taylor, G. C. and Hawkes, Nigel and Shippen, Alan (2015) Accurate simulations of TEPC neutron spectra using Geant4. Radiation Physics and Chemistry, 116. pp. 186-188. ISSN 0969-806X

Tian, Yingtao and Shang, Xiaobang and Wang, Yi and Lancaster, Michael J. (2015) Investigation of SU8 as a structural material for fabricating passive millimeter-wave and terahertz components. Journal of Micro/Nanolithography, MEMS, and MOEMS, 14 (4): 044507. ISSN 1932-5150

Ting, Valeska P. and Ramirez-Cuesta, Anibal J. and Bimbo, Nuno and Sharpe, Jessica E. and Noguera-Diaz, Antonio and Presser, Volker and Rudic, Svemir and Mays, Timothy J. (2015) Direct evidence for solid-like hydrogen in a nanoporous carbon hydrogen storage material at supercritical temperatures. ACS Nano, 9 (8). pp. 8249-8254. ISSN 1936-0851

Titi, Sufian and Taylor, C. James (2015) Combined pole assignment and mean value engine model multivariable decoupling control. Transactions of the Institute of Measurement and Control, 37 (1). pp. 40-49. ISSN 1477-0369

Toda-Caraballo, I. and Wróbel, J. S. and Dudarev, S. L. and Nguyen-Manh, D. and Rivera-Díaz-Del-Castillo, P. E J (2015) Interatomic spacing distribution in multicomponent alloys. Acta Materialia, 97: 12259. pp. 156-169. ISSN 1359-6454

Toda-Caraballo, Isaac and Rivera-Díaz-Del-Castillo, Pedro E.J. (2015) Modelling solid solution hardening in high entropy alloys. Acta Materialia, 85. pp. 14-23. ISSN 1359-6454

Toda-Caraballo, Isaac and Rivera-Díaz-del-Castillo, Pedro E.J. (2015) Modelling and Design of Magnesium and High Entropy Alloys Through Combining Statistical and Physical Models. JOM, 67 (1). pp. 108-117. ISSN 1047-4838

Tsado, Yakubu and Lund, David and Gamage, Kelum (2015) Resilient communication for smart grid ubiquitous sensor network : state of the art and prospects for next generation. Computer Communications. ISSN 0140-3664

Turvey, Geoffrey and Cerutti, Xavier (2015) Effects of splice joint geometry and bolt torque of the serviceability response of pultruded glass fibre reinforced polymer composite beams. Composite Structures, 131. pp. 490-500. ISSN 0263-8223

Turvey, Geoffrey (2015) Enhancing the load capacity of pultruded GFRP beams via discrete load redistribution. Composite Structures, 122. pp. 352-360. ISSN 0263-8223

Turvey, Geoffrey and Cerutti, Xavier (2015) Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints. Composite Structures, 119 (1). pp. 543-550. ISSN 0263-8223

Turvey, Geoffrey John (2015) Experimental investigation of the load–deformation behaviour of pultruded GFRP modular and custom safety barriers. Composite Structures, 133. pp. 659-669. ISSN 0263-8223

Tyrk, Mateusz A. and Zolotovskaya, Svetlana A. and Gillespie, W. Allan and Abdolvand, Amin (2015) Radially and azimuthally polarized laser induced shape transformation of embedded metallic nanoparticles in glass. Optics Express, 23 (18). pp. 23394-23400. ISSN 1094-4087

Tzagkaroulakis, I. and Boxall, C. (2015) Real time nanogravimetric monitoring of corrosion for nuclear decommissioning. ECS Transactions, 66 (17). pp. 73-83. ISSN 1938-6737

Ulmeanu, Mihaela and Doicin, Cristian and Baila, Diana and Rennie, Allan Edward Watson and Neagu, Corneliu and Laha, Shondipon (2015) Comparative evaluation of optimum additive manufacturing technology to fabricate medical bespoke prototypes obtained with composite materials. Revista de Materiale Plastice, 52 (3). pp. 416-422.

Vandrovcova, Marta and Douglas, Timothy E.L. and Mróz, Waldemar and Musial, Olga and Schaubroeck, David and Budner, Boguslaw and Syroka, Renata and Dubruel, Peter and Bacakova, Lucie (2015) Pulsed laser deposition of magnesium-doped calcium phosphate coatings on porous polycaprolactone scaffolds produced by rapid prototyping. Materials Letters, 148. pp. 178-183. ISSN 0167-577X

Vivanpatarakij, Supawat and Aiouache, Farid and Assabumrungrat, Suttichai (2015) Performance of an improved combination unit of Pd-membrane methane steam reformer and intermediate temperature solid oxide fuel cell (C-Pd-ITSOFC). International Journal of Hydrogen Energy, 40 (4). pp. 1894-1901. ISSN 0360-3199

Vynckier, A. K. and Lin, Hungyen and Zeitler, J. Axel and Willart, J. F. and Bongaers, E. and Voorspoels, J. and Remon, J. P. and Vervaet, C. (2015) Calendering as a direct shaping tool for the continuous production of fixed-dose combination products via co-extrusion. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 125-131. ISSN 0939-6411

Wallis, R. and Degl'Innocenti, Riccardo and Jessop, D. S. and Ren, Y. and Klimont, A. and Shah, Y. D. and Mitrofanov, O. and Bledt, C. M. and Melzer, J. E. and Harrington, J. A. and Beere, H. E. and Ritchie, D. A. (2015) Efficient coupling of double-metal terahertz quantum cascade lasers to flexible dielectriclined hollow metallic waveguides. Optics Express, 23 (20). pp. 26276-26287. ISSN 1094-4087

Waters, Shaun and Aggidis, George (2015) Over 2000 years in review : revival of the Archimedes screw from pump to turbine. Renewable and Sustainable Energy Reviews, 51. pp. 497-505. ISSN 1364-0321

Wen, W. and Borodachenkova, M. and Tomé, C.N. and Vincze, G. and Rauch, E.F. and Barlat, F. and Grácio, J.J. (2015) Mechanical behavior of Mg subjected to strain path changes : Experiments and modeling. International Journal of Plasticity, 73. pp. 171-183. ISSN 0749-6419

Wen, W. and Borodachenkova, M. and Pereira, A. and Barlat, F. and Gracio, J. (2015) Hardening behavior and texture evolution of TWIP steel during strain path change. IOP Conference Series: Materials Science and Engineering, 82 (1): 012089. ISSN 1757-899X

Wilbraham, Richard and Boxall, Colin and Goddard, David T. and Taylor, Robin J. and Woodbury, Simon E. (2015) The effect of hydrogen peroxide on uranium oxide films on 316L stainless steel. Journal of Nuclear Materials, 464. pp. 86-96. ISSN 0022-3115

Wilbraham, Richard J. and Boxall, Colin (2015) The effect of SO3-Ph-BTBP on stainless steel corrosion in nitric acid. Nukleonika, 60 (4). pp. 865-869. ISSN 0029-5922

Wilson, Emma Denise and Assaf, Tareq and Pearson, Martin J and Rossiter, Jonathan and Dean, Paul and Anderson, Sean R and Porrill, John (2015) Biohybrid control of general linear systems using the adaptive filter model of cerebellum. Frontiers in neurorobotics, 9 (5): 5.

Yadav, Pradeep K. and Lemoine, Patrick and Dale, Graham and Hamilton, Jeremy W. J. and Dunlop, Patrick S. M. and Byrne, John A. and Mailley, Pascal and Boxall, Colin (2015) Hierarchical titania nanostructures prepared with focused ion beam-assisted anodisation of titanium in an aqueous electrolyte. Applied Physics A, 119 (1). pp. 107-113. ISSN 0947-8396

Yar, M. and Shahzad, S. and Siddiqi, S.A. and Mahmood, N. and Rauf, A. and Anwar, M.S. and Chaudhry, A.A. and Rehman, I.U. (2015) Triethyl orthoformate mediated a novel crosslinking method for the preparation of hydrogels for tissue engineering applications : Characterization and in vitro cytocompatibility analysis. Materials Science and Engineering: A, 56. pp. 154-164. ISSN 0921-5093

Yassin, Samy and Su, Ke and Lin, Hungyen and Gladden, Lynn F. and Zeitler, J. Axel (2015) Diffusion and swelling measurements in pharmaceutical powder compacts using terahertz pulsed imaging. Journal of Pharmaceutical Sciences, 104 (5). pp. 1658-1667. ISSN 0022-3549

Zanotto, Simone and Lange, Christoph and Maag, Thomas and Pitanti, Alessandro and Miseikis, Vaidotas and Coletti, Camilla and Degl'Innocenti, Riccardo and Baldacci, Lorenzo and Huber, Rupert and Tredicucci, Alessandro (2015) Magneto-optic transmittance modulation observed in a hybrid graphene-split ring resonator terahertz metasurface. Applied Physics Letters, 107 (12): 121104. ISSN 0003-6951

Zha, Xiaoxiong and Yu, Min and Ye, Jianqiao and Feng, Ganlin (2015) Numerical modeling of supercritical carbonation process in cement-based materials. Cement and Concrete Research, 72. pp. 10-20. ISSN 0008-8846

Zhang, Dahai and Aggidis, George and Wang, Yifei and Gu, Xinxing and Li, Wei and Chen, Ying (2015) Wave tank experiments on the power capture of a multi-axis wave energy converter. Journal of Marine Science and Technology, 20 (3). pp. 520-529. ISSN 0948-4280

Zhang, Dahai and Chen, Ying and Yang, Jing and Tan, Ming and Ma, Xiandong and Li, Wei (2015) Fault ride-through analysis and protection of a 2-MW DFIG tidal current turbine. Marine Technology Society Journal, 49 (5). pp. 49-57. ISSN 0025-3324

Zhang, Yi and Grassia, Paul and Martin, Alastair and Usher, Shane and Scales, Peter (2015) Mathematical modelling of batch sedimentation subject to slow aggregate densification. Chemical Engineering Science, 128. pp. 54-63. ISSN 0009-2509

Zhang, Yi and Grassia, Paul and Martin, Alastair and Usher, Shane P. and Scales, Peter J. (2015) Designing thickeners by matching hindered settling and gelled suspension zones in the presence of aggregate densification. Chemical Engineering Science, 134. pp. 297-307. ISSN 0009-2509

Zidonis, Audrius and Benzon, David and Aggidis, George (2015) Development of hydro impulse turbines and new opportunities. Renewable and Sustainable Energy Reviews, 51: RSER4610. 1624–1635. ISSN 1364-0321

Zidonis, Audrius and Aggidis, George (2015) State of the art in numerical modeling of Pelton turbines. Renewable and Sustainable Energy Reviews, 45. pp. 135-144. ISSN 1364-0321

Zidonis, Audrius and Panagiotopoulos, Alexandros and Aggidis, George and Anagnostopoulos, John and Papantonis, Dimitris (2015) Parametric optimisation of two Pelton turbine runner designs using CFD. Journal of Hydrodynamics, 27 (3). pp. 840-847. ISSN 1001-6058

Contribution in Book/Report/Proceedings

Apsimon, Robert James and Burt, Graeme Campbell and Mitchell, James and Pitman, Sam and Owen, Hywel and Degiovanni, A. (2015) ProTec - A Normal-Conducting Cyclinac for Proton Therapy Research and Radioisotope Production. In: Proceedings of the 6th International Particle Accelerator Conference :. JACoW, pp. 3883-3885. ISBN 9783954501687

Bagnato, G. and Liguori, S. and Iulianelli, A. and Curcio, S. and Basile, A. (2015) Artificial neural network model for water gas shift reaction in a dense Pd-Ag membrane reactor. In: Proceedings of the 6th European Fuel Cell - Piero Lunghi Conference, EFC 2015 :. ENEA, ITA, pp. 363-364. ISBN 9788882863241

Balduzzi, Francesco and Bianchini, Alessandro and Gigante, Fabio and Ferrara, Giovanni and Campobasso, Sergio and Ferrari, Lorenzo (2015) Parametric and comparative assessment of Navier-Stokes CFD methodologies for Darrieus wind turbine performance analysis. In: ASME Turbo Expo 2015 : Turbine Technical Conference and Exposition. The American Society of Mechanical Engineers, CAN. ISBN 9780791856802

Basile, Angelo and Iulianelli, Adolfo and Bagnato, Giuseppe and Dalena, Francesco (2015) Hydrogen Production for PEM Fuel Cells. In: Production of Hydrogen from Renewable Resources :. Biofuels and Biorefineries . Springer, pp. 315-338. ISBN 9789401773294

Billa, Laxma Reddy and Muhammad, Nadeem Akram and Chen, Xuyuan (2015) Novel rectangular slow-wave circuit for THz traveling wave tubes. In: 2015 8th UK, Europe, China Millimeter Waves and THz Technology Workshop (UCMMT) :. IEEE. ISBN 9781467374347

Blaney, Adam and Alexander, Jason Mark and Dunn, Nicholas Simon and Richards, Daniel Courtney and Rennie, Allan Edward Watson and Anwar, Jamshed (2015) Adaptive materials : utilising additive manufactured scaffolds to control self-organising material aggregation. In: Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference :. Lancaster University, GBR, pp. 49-57. ISBN 9781526203038

Burt, Graeme Campbell (2015) Crab Cavity Development. In: The High Luminosity Large Hadron Collider : The New Machine for Illuminating the Mysteries of Universe. Advanced Series on Directions in High Energy Physics . World Scientific. ISBN 9789814675468

Caboni, Marco and Campobasso, Sergio and Minisci, Edmondo (2015) Wind turbine design optimization under environmental uncertainty. In: ASME Turbo Expo 2015 : Turbine Technical Conference and Exposition. The American Society of Mechanical Engineers, CAN. ISBN 9780791856802

Caboni, Marco and Minisci, Edmondo and Campobasso, Sergio (2015) Robust aerodynamic design optimization of horizontal axis wind turbines. In: Advances in evolutionary and deterministic methods for design, optimization and control in engineering and sciences :. Computational Methods in Applied Sciences . Springer, pp. 225-240. ISBN 3319115405

Campobasso, Sergio (2015) Robust design optimization of wind turbine rotors : invited paper. In: The 16th International Conference on Fluid Flow Technologies (CMFF’15) :. UNSPECIFIED, HUN.

Celik, H. Kursat and Rennie, Allan Edward Watson and Dawson, David and Eatough, Adrian and Eatough, Jed and Akinci, Ibrahim (2015) Deformation simulation of a tyre safety cage in testing of agricultural vehicle tyres. In: Environmentally Friendly Agriculture and Forestry for Future Generations : International Scientific XXXVI CIOSTA & CIGR Section V Conference 2015. Saint Petersburg State Agrarian University, SUN, pp. 172-183. ISBN 9785859832576

De Carvalho, Thiago P. and Morvan, Hervé P. and Hargreaves, David and Oun, Hatem and Kennedy, Andrew (2015) Experimental and tomography-based CFD investigations of the flow in open cell metal foams with application to aero engine separators. In: Heat Transfer :. American Society of Mechanical Engineers (ASME), CAN. ISBN 9780791856734

Degl'Innocenti, R. and Shah, Y. D. and Wallis, R. and Klimont, A. and Ren, Y. and Jessop, D. S. and Beere, H. E. and Ritchie, D. A. (2015) A hybrid plasmonic waveguide terahertz quantum cascade laser. In: Proceedings 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference, CLEO/Europe-EQEC 2015 :. Optical Society of America (OSA), DEU. ISBN 9781467374750

Degl'Innocenti, Riccardo and Klimont, A. and Shah, Y. D. and Wallis, R. and Ren, Y. and Jessop, D. S. and Beere, H. E. and Ritchie, D. A. (2015) A hybrid plasmonic waveguide terahertz quantum cascade laser. In: European Conference on Lasers and Electro-Optics, CLEO 2015 :. OSA - The Optical Society, DEU. ISBN 9781557528209

Degl'Innocenti, Riccardo and Shah, Y. D. and Masini, L. and Ronzani, A. and Pitanti, A. and Ren, Y. and Jessop, D. S. and Tredicucci, A. and Beere, H. E. and Ritchie, D. A. (2015) THz quantum cascade lasers based on a hyperuniform disordered optical cavity design. In: European Conference on Lasers and Electro-Optics, CLEO 2015 :. OSA - The Optical Society, DEU. ISBN 9781467374750

Degl'Innocenti, Riccardo and Shah, Y. D. and Wallis, R. and Klimont, A. and Ren, Y. and Jessop, D. S. and Beere, H. E. and Ritchie, D. A. (2015) A hybrid plasmonic waveguide terahertz quantum cascade laser. In: CLEO: Science and Innovations, CLEO-SI 2015 :. Optical Society of America (OSA), USA, p. 2267. ISBN 9781557529688

Degl'Innocenti, Riccardo and Shah, Y. D. and Wallis, R. and Klimont, A. and Ren, Y. and Jessop, D. S. and Beere, H. E. and Ritchie, D. A. (2015) A hybrid plasmonic waveguide terahertz quantum cascade laser. In: 2015 Conference on Lasers and Electro-Optics, CLEO 2015 :. Institute of Electrical and Electronics Engineers Inc., USA. ISBN 9781557529688

Drofelnik, Jernej and Campobasso, Sergio (2015) Three-dimensional Navier-Stokes turbulent hydrodynamic analysis and performance assessment of oscillating wings for power generation. In: The 16th International Conference on Fluid Flow Technologies (CMFF’15) :. UNSPECIFIED.

Fernando, Nuwantha and Gamage, Kelum (2015) A rare-earth free SHEV powertrain and its control. In: 2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe) :. IEEE, SWZ, pp. 1-7. ISBN 9781479982776

Gelazanskas, Linas and Gamage, Kelum (2015) Forecasting hot water consumption in dwellings using artificial neural networks. In: 2015 IEEE 5th International Conference on Power Engineering, Energy and Electrical Drives (POWERENG2015) :. IEEE, LVA, pp. 410-415. ISBN 9781467372039

Gelazanskas, Linas and Gamage, Kelum (2015) Neural network based real-time pricing in demand side management for future smart grid. In: Power Electronics, Machines and Drives (PEMD 2014), 7th IET International Conference on :. IEEE, GBR, pp. 1-5. ISBN 9781849198158

Gratus, Jonathan and McCormack, Matthew and Letizia, Rosa (2015) Spatially dispersive inhomogeneous dielectric wire media with periodic structure. In: Proceedings of PIERS 2015 in Prague, July 6-9, 2015 :. The Electromagnetics Academy, CZE, pp. 675-680. ISBN 9781934142301

Hong, Q. and Platt, S. P. and Prokofiev, A. V. and Passoth, E. (2015) Detailed Geant4 simulations of the ANITA and ANITA-CUP neutron facilities. In: 2015 15th European Conference on Radiation and Its Effects on Components and Systems, RADECS 2015 :. Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS . Institute of Electrical and Electronics Engineers Inc., SUN. ISBN 9781509002313

Hou, Xiaonan and Silberschmidt, Vadim (2015) Metamaterials with negative Poisson’s ratio : a review of mechanical propterties and deformation mechanisms. In: Mechanics of Advanced Materials : Analysis of Properties and Performance. Engineering Materials . Springer International Publishing, pp. 155-179. ISBN 9783319171173

Hu, Yulu and Hu, Quan and Mineo, Mauro and Li, Li and Napoli, Francesco and Li, Bin and Zhu, Xiaofang and Li, Jianqing and Xu, Li and Huang, Tao and Jin, Xiaolin and Paoloni, Claudio (2015) Dispersion characteristics of double-corrugated rectangular waveguide for terahertz vacuum devices. In: Infrared, Millimeter, and Terahertz waves (IRMMW-THz), 2015 40th International Conference on :. IEEE, HKG, pp. 1-2. ISBN 9781479982721

Letizia, Rosa and Mineo, Mauro and Paoloni, Claudio (2015) Photonic bandgap coupler for 346 GHz sheet-beam BWO. In: 2015 8th UK, Europe, China Millimeter Waves and THz Technology Workshop (UCMMT) :. IEEE, GBR. ISBN 9781467374347

Li, Yufu and Yin, Xiaoxing and Zhao, Hongxin and Wang, Lei and Yang, Mei (2015) Radiation enhanced broadband planar TEM horn antenna. In: 2014 Asia-Pacific Microwave Conference :. IEEE. ISBN 9784902339314

Lok, L. B. and Brennan, P. V. and Ash, M. and Nicholls, K. W. (2015) Autonomous phase-sensitive radio echo sounder for monitoring and imaging antarctic ice shelves. In: 2015 8th International Workshop on Advanced Ground Penetrating Radar, IWAGPR 2015 :. Institute of Electrical and Electronics Engineers Inc., ITA. ISBN 9781479964956

Luhmann Jr., Neville C. and Popovic, Branko and Himes, Logan and Barchfeld, Robert and Gamzina, Diana and Paoloni, Claudio and Letizia, Rosa and Mineo, Mauro and Feng, Jinjun and Tang, Ye and Gao, Mengchao and Pan, Pan (2015) Nanoscale surface roughness effects on THz vacuum electron device performance. In: Nanotechnology (IEEE-NANO) , 2015 IEEE 15th International Conference on :. IEEE, pp. 55-58. ISBN 9781467381574

Malek Abadi, Ali and Mineo, Mauro and Li, Li and Gamzina, Diana and Popovic, Branko and Himes, Logan and Barchfeld, Robert and Letizia, Rosa and Feng, Jinjun and Paoloni, Claudio and Luhmann Jr., Neville C. (2015) Simulation of 0.346 THz double corrugated waveguide BWO. In: 2015 8th UK, Europe, China Conference on Millimetre Waves & Terahertz Technology Workshop (UCMMT) :. IEEE, GBR. ISBN 9781467374347

Montazeri, Allahyar and Karna, Saurav (2015) Adaptive frequency domain identification for ANC systems using non-stationary signals. In: 2015 IEEE International Symposium on Signal Processing and Information Technology (ISSPIT) :. IEEE, pp. 528-533. ISBN 9781509004805

Paoloni, Claudio and Letizia, Rosa and Mineo, Mauro and Malek Abadi, Ali and Luhmann Jr., Neville C. and Popovic, Branko and Himes, Logan and Barchfeld, Robert and Gamzina, Diana and Yue, Lingna and Tang, Xiaopin and Feng, Jinjun and Tang, Ye and Gao, Mengchao and Zhang, Fuzhi (2015) Magnetic fusion energy plasma diagnostic needs novel THz BWOs. In: Vacuum Electronics Conference (IVEC), 2015 IEEE International :. IEEE, CHN. ISBN 9781479971091

Paoloni, Claudio and Letizia, Rosa and Napoli, Francesco and Ni, Qiang and Rennie, Allan and Zimmerman, Ralph and Andre, Frederic and Pham, Kim and Krozer, Viktor and Magne, Francois and Burciu, Ioan and Ramirez, Antonio and Rocchi, Marc and Marilier, Marc and Vilar, Ruth (2015) Horizon 2020 TWEETHER project for W-band high data rate wireless communications. In: Vacuum Electronics Conference (IVEC), 2015 IEEE International :. IEEE, CHN. ISBN 9781479971107

Paoloni, Claudio and Mineo, Mauro (2015) Sub-THz traveling wave amplifiers based on the double corrugated waveguide. In: Plasma Sciences (ICOPS), 2015 IEEE International Conference on :. IEEE, TUR. ISBN 9781479969746

Paoloni, Claudio and Yue, Lingna and Tang, Xiaopin and Zhang, Fuzhi and Popovic, Branko and Himes, Logan and Barchfeld, Robert and Gamzina, Diana and Mineo, Mauro and Letizia, Rosa and Luhmann Jr., Neville C. (2015) THz Backward-wave oscillators for plasma diagnostic in nuclear fusion. In: Plasma Sciences (ICOPS), 2015 IEEE International Conference on :. IEEE, TUR.

Payne, Christopher and Sellin, Paul and Ellis, Mark and Duroe, Kirk and Jones, Ashley Richard and Joyce, Malcolm John and Randall, George and Speller, Robert (2015) Neutron/gamma pulse shape discrimination in EJ-299-34 at high flux. In: 2015 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC) :. IEEE, pp. 1-5. ISBN 9781467398633

Popovic, Branko and Himes, Logan and Gamzina, Diana and Luhmann Jr., Neville C. and Paoloni, Claudio and Letizia, Rosa and Mineo, Mauro and Malek Abadi, Ali and Yue, Lingna and Tang, Xiaopin and Feng, Jinjun and Tang, Ye and Gao, Mengchao and Zhang, Fuzhi (2015) Design and fabrication of a sheet beam BWO at 346 GHz. In: Vacuum Electronics Conference (IVEC), 2015 IEEE International :. IEEE, CHN, pp. 1-2. ISBN 9781479971091

Qian, Peng and Ma, Xiandong and Wang, Yifei (2015) Condition monitoring of wind turbines based on extreme learning machine. In: ICAC2015 : Proceedings of the 21st International Conference on Automation and Computing. IEEE, GBR, pp. 37-42. ISBN 9780992680107

Randall, George and Ellis, Mark and Duroe, Kirk and Jones, Ashley Richard and Joyce, Malcolm John and Payne, Christopher and Sellin, Paul and Speller, Robert (2015) RadICAL Stack : a localisation method for dynamic gamma/neutron fields. In: 2015 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC) :. IEEE, pp. 1-4. ISBN 9781467398633

Ren, Y. and Wallis, R. and Shah, Y. D. and Jessop, D. S. and Degl'Innocenti, Riccardo and Klimont, A. and Kamboj, V. and Beere, H. E. and Ritchie, D. A. (2015) Terahertz quantum cascade amplifier. In: 26th International Symposium on Space Terahertz Technology, ISSTT 2015 :. International Symposium on Space Terahertz Technology, USA.

Rivera-Díaz-Del-Castillo, P. E.J. (2015) Understanding microstructural transitions occurring under rolling contact fatigue. In: Bearing Steel Technologies : 10th Volume, Advances in Steel Technologies for Rolling Bearings. ASTM International, CAN, pp. 550-563. ISBN 9780803176058

Sharples, Emmy and Letizia, Rosa (2015) Optimization studies on CSRR loaded waveguide for particle accelerator applications. In: Abstracts 2015 IEEE International Conference on Plasma Sciences (ICOPS) :. IEEE, GBR. ISBN 9781479969746

Sharples, Emmy and Letizia, Rosa (2015) THz Wakefield radiation generation via dielectric Bragg waveguide. In: Advanced Electromagnetic Materials in Microwaves and Optics (METAMATERIALS), 2015 9th International Congress on :. IEEE, GBR, pp. 289-291. ISBN 9781479978366

Siddiqi, S.A. and Manzoor, F. and Azhar, U. and Jamal, A. and Tariq, M. and Anwar, M.S. and Saleem, M. and Chaudhry, A.A. and Rehman, I.U. (2015) Preparation and investigation of nano-carbonated hydroxy apatite/polymer composite spongy scaffolds for biomedical applications. In: TechConnect World Innovation Conference & Expo 2015 :. TechConnect, pp. 270-273. ISBN 9781498747295

Toda-Caraballo, I. and Rivera-Diaz-Del-Castillo, P. E J (2015) Solid solution formation rules and crystal structure indicators on high entropy alloys. In: PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 :. International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, CAN, pp. 793-794. ISBN 9780692437360

Tsado, Yakubu and Gamage, Kelum and Lund, David (2015) Performance evaluation of Wireless Mesh Network routing protocol for smart grid networks. In: Proceedings of IEICE Information and Communication Technology Forum 2015, Manchester, UK :. Polish Association of Telecommunication Engineers, pp. 1-6. ISBN 9788393260218

Tsitsimpelis, Ioannis and Taylor, C. James (2015) Partitioning of indoor airspace for multi-zone thermal modelling using hierarchical cluster analysis. In: 14th European Control Conference :. IEEE, AUT, pp. 410-415. ISBN 9781467371605

Turvey, Geoffrey John (2015) Bending of unequal span continuous pultruded glass fibre reinforced polymer (GFRP) beams. In: Advanced Composites in Construction, ACIC 2015 - Proceedings of the 7th Biennial Conference on Advanced Composites In Construction :. UNSPECIFIED, pp. 227-232.

Walker, Peter F.F. and Kerrigan, Aidan and Green, Matthew and Cardinal, Nina and Connell, James and Rivera-Díaz-Del-Castillo, Pedro E.J. (2015) Modelling of micro-segregation in a 1C-1.5Cr type bearing steel. In: Bearing Steel Technologies : 10th Volume, Advances in Steel Technologies for Rolling Bearings. ASTM International, CAN, pp. 54-80. ISBN 9780803176058

Wallis, R. and Ren, Y. and Shah, Y. D. and Jessop, D. S. and Degl'Innocenti, Riccardo and Klimont, A. and Kamboj, V. and Beere, H. E. and Ritchie, D. A. (2015) High gain terahertz quantum cascade amplifier. In: European Conference on Lasers and Electro-Optics, CLEO 2015 :. OSA - The Optical Society, DEU. ISBN 9781467374750

Wallis, Robert and Ren, Yuan and Jessop, David S. and Degl'Innocenti, Riccardo and Klimont, Adam and Beere, Harvey E. and Ritchie, David A. (2015) Self-mixing imaging using a terahertz quantum cascade amplifier. In: IRMMW-THz 2015 - 40th International Conference on Infrared, Millimeter, and Terahertz Waves :. Institute of Electrical and Electronics Engineers Inc., CHN. ISBN 9781479982721

Wang, Lei and Esquius-Morote, Marc and Yin, Xiaoxing and Mosig, Juan R. (2015) Gain enhanced H-plane gap SIW horn antenna with phase correction. In: 2015 9th European Conference on Antennas and Propagation (EuCAP) :. IEEE. ISBN 9788890701856

Waring, Rob and Hu, Yulu and Paoloni, Claudio (2015) A Fast Model of a 1-D Nonlinear Beam-Wave Interaction for a 225GHz TWT. In: 8th UK-Europe-China Workshop on mm-waves and THz Technologies :. IEEE, GBR.

Waring, Robert and Hu, Yulu and Paoloni, Claudio (2015) A fast model of a 1-D nonlinear beam-wave interaction for a 225 GHz TWT. In: 2015 8th UK, Europe, China Millimeter Waves and THz Technology Workshop (UCMMT) :. IEEE, pp. 1-3. ISBN 9781467374347

Woollett, Nathan and Bailey, Ian and Burt, Graeme and Chattopadhyay, Swapan and Dainton, John and Dexter, Amos and Goudket, Phillipe and Jenkins, Michael and Kalliokoski, Matti and Moss, Andrew and Pattalwar, Shrikant and Thakker, Trina and Williams, Peter (2015) Preliminary Results of the CASCADE Hidden Sector Photon Search. In: Unknown :. Verlag Deutsches Elektronen-Synchrotron.

Woolley, Benjamin and Ambattu, Praveen Kumar and Apsimon, Robert James and Burt, Graeme Campbell and Dexter, Amos Christopher and Grudiev, A. and Syratchev, Igor and Wegner, Rolf and Wuensch, Walter (2015) High gradient testing of an X-band crab cavity at XBOX2. In: Proceedings of the 6th International Particle Accelerator Conference : IPAC 2015. JACoW, Geneva, pp. 3242-3245. ISBN 9783954501687

Monograph

Letizia, Rosa and Ye, Jianqiao and Grover, Paul and Shah, Simon (2015) Fast estimate of the SAR using spline interpolation approach for parallel transmit B1 mapping in ultra-high field MRI. Working Paper. UNSPECIFIED.

Contribution to Conference

Afouxenidis, Dimitrios and Kolosov, Oleg and Vourlias, G. and Krier, Anthony and Milne, W.I. and Adamopoulos, George (2015) High-mobility Gallium Indium Zinc Oxide-based thin film transistors grown by Spray Pyrolysis in Air. In: EMRS, 2015-05-11 - 2015-05-15, France.

Aiouache, Farid and Aldehani, Mohammed and Alzahrani, Faris and physick, Anthony and Rooney, David (2015) Hydrogen catalytic exchange by dual hydrophobic and hydrophilic catalyst. In: European Symposium on Chemical Reaction Engineering, 2015-10-27 - 2015-10-30.

Amaechi, Chiemela Victor and Ye, Jianqiao (2015) Numerical Modeling of Oil/Gas Flow in Pipes in Deep Sea. In: Lancaster University FST Christmas Conference 2015, 2015-12-15 - 2015-12-15, Lancaster University.

Balmer, Matthew and Akurugoda Gamage, Kelum Asanga and Taylor, Graeme (2015) A novel approach to neutron dosimetry. In: Neutron Users’ Club Meeting (NUC-2015), 2015-10-20 - 2015-10-20.

Bin Esro, Mazran and Kolosov, Oleg and Vourlias, G. and Krier, Anthony and Milne, W.I. and Adamopoulos, George (2015) Low-voltage ZnO thin-film transistors employing Nd2O3 high-k dielectrics deposited by spray pyrolysis in air. In: EMRS 2015, 2015-05-11 - 2015-05-15, France.

Bin Esro, Mazran and Mazzocco, Riccardo and Vourlias, G. and Krier, Anthony and Milne, W.I. and Kolosov, Oleg and Adamopoulos, George (2015) Solution processed a-LaAlO3 gate dielectrics for their applications in thin film transistors employing metal oxide semiconducting channels. In: EMRS 2015, 2015-05-11 - 2015-05-15, France.

Blaney, Adam and Alexander, Jason and Dunn, Nick and Richards, Daniel and Rennie, Allan and Anwar, Jamshed (2015) Adaptive Materials : Utilising additive manufactured scaffolds to control self-organising material aggregation. In: 14th Rapid Design, Prototyping & Manufacturing Conference (RDPM2015), 2015-12-15 - 2015-12-16, Loughborough Design School, Loughborough University.

Burns, Neil and Burns, Mark and Travis, Darren and Geekie, Louise and Rennie, Allan (2015) Designing advanced filtration media through metal additive manufacturing. In: FILTECH: The Filtration Event, Conference and Exhibition, 2015-02-24 - 2015-02-26, KoelnMesse, Cologne.

Burrell, T. and Montazeri, A. and Monk, S. D. and Taylor, C. J. (2015) Review of autonomous navigation for indoor aerial robots within a nuclear decommissioning context. In: International Conference on Systems Engineering 2015, 2015-09-08 - 2015-09-10.

Childs, D.T.D. and Hogg, R.A. and Revin, D.G. and Rehman, I.U. and Cockburn, J.W. and Matcher, S.J. (2015) The mid-infrared swept laser : Life beyond OCT? In: SPIE BiOS, 2015-03-02.

Constable, David and Lingwood, Christopher James and Burt, Graeme Campbell (2015) Numerical design of high efficiency klystrons using core oscillation bunching. In: National Vacuum Electronics Conference (NVEC) 2015, 2015-11-18 - 2015-11-18, University of Strathclyde.

El Kashouty, Menna and Rennie, Allan and Ghazy, Mootaz (2015) Assessing additive and subtractive manufacturing technologies for the production of tools in the automotive industry. In: The 23rd CAPE Conference: Manufacturing Research and its Applications in the 21st Century, 2020-11-03 - 2020-11-04, Edinburgh University.

Gamage, Kelum and Zhou, Qi and Hayes, Sean (2015) Hexagonal uniformly redundant arrays (HURAs) for scintillator based coded aperture neutron imaging. In: IEEE Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA-2015), 2015-04-20 - 2015-04-24.

Hasib, Hazman and Rennie, Allan Edward Watson and Burns, Neil and Geekie, Louise (2015) Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing. In: Testing, Characterisation and Filter Media 7: Conference, Exhibition and Training Course, 2015-11-30 - 2015-12-01, Riverside Innovation Centre.

Hasib, Hazman and Rennie, Allan Edward Watson and Burns, Neil and Geekie, Louise (2015) Simulation of flow characteristics for filters designed with a non-stochastic lattice structure fabricated via additive manufacturing. In: 14th Rapid Design, Prototyping & Manufacturing Conference (RDPM2015), 2015-12-15 - 2015-12-16, Loughborough Design School, Loughborough University.

Kaufman, John and Rennie, Allan and Clement, Morag (2015) Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts. In: 25th CIRP Design Conference 2015 - Innovative Product Creation, 2015-03-02 - 2015-03-04, Technion – Israel Institute of Technology.

King, Bethany Anne Tracy and Rowan, Ben and Williams, Chris and Williams, Luke and Tubby, David and Rennie, Allan Edward Watson and Dennison, Kieth (2015) Multi-material additive manufacture of multi-layer ceramic capacitors. In: 14th Rapid Design, Prototyping & Manufacturing Conference (RDPM2015), 2015-12-15 - 2015-12-16, Loughborough Design School, Loughborough University.

Letizia, Rosa and Mineo, Mauro and Paoloni, Claudio (2015) THz BWO based on photonic crystal corrugated waveguide. In: ICOPS 2015, 2015-05-24 - 2015-05-28, Turkey.

Lin, Hungyen and Dong, Yue and Pei, C. and Elliot, J. A. and Shen, Y. and Zeitler, J. Axel (2015) Investigation of pharmaceutical film coating process with terahertz sensing, optical coherence tomography and numerical modelling. In: 40th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz) 2015, 2015-08-23 - 2015-08-26.

Lingwood, Christopher James (2015) (Invited) Development of klystrons with ultimately high - 90% RF power production efficiency. In: FCC Week 2015, 2016-03-23 - 2016-03-29. (Unpublished)

Lingwood, Christopher James (2015) (Invited) High-power, high-efficiency klystrons. In: UNSPECIFIED. (Unpublished)

Najdanovic, Vesna (2015) In Situ Transesterification of Spent Coffee Grounds for Biodiesel Production. In: 2nd EuCheMS Congress on Green and Sustainable Chemistry, 2015-10-20, Faculty of Science and Technology, New University of Lisbon.

Najdanovic, Vesna (2015) Team-based learning for first year engineering students. In: Team-based Learning: Leading Educational Change Conference, 2015-10-22, University of Bradford.

Najdanovic-Visak, Vesna (2015) Styrene carbonate synthesis from carbon dioxide. In: 3rd International Symposium on Chemistry for Energy Conversion and Storage, 2015-01-18.

Odijie, Charles and Ye, Jianqiao (2015) Understanding Fluid-Structure Interaction for high amplitude wave loadings on a deep-draft paired column semi-submersible platform : a finite element approach. In: International Conference on Light Weight Design of Marine Structures, 2015-11-09 - 2015-11-11, The Corinthian Club, 191 Ingram St,, Glasgow, G1 1DA.

Oikonomou, Charikleia and Aggidis, George (2015) Wave energy resource assessment and device selection. In: SuperGen UKCMER Annual Assembly, 2015-02-27. (Unpublished)

Paoloni, Claudio and Letizia, Rosa and Ni, Qiang and Krozer, Viktor and Andre, Frederic and Magne, Francois and Marilier, Marc and Zimmerman, Ralph and Ramirez, Antonio and Vilar, Ruth and Burciu, Ioan (2015) Scenarios and use cases in Tweether : W-band for Internet Everywhere. In: EUCNC 2015, 2015-06-29 - 2015-07-02, France.

Parker, Helen and Joyce, Malcolm and Jones, Ashley Richard (2015) Counting neutrons from the spontaneous fission of 238-U using scintillation detectors and mixed field analysers. In: ANIMMA - Advancements in Nuclear instrumentation Measurement Methods and their Applications, 2015-04-20 - 2015-04-24, Lisbon Congress Centre.

West, C. and Burrell, T. and Montazeri, A. and Monk, S. D. and Taylor, C. J. (2015) Research and teaching using a hydraulically-actuated nuclear decommissioning robot. In: International Conference on Systems Engineering 2015, 2015-09-08 - 2015-09-10.

Book/Report/Proceedings

Qin, Qinghua and Ye, Jianqiao, eds. (2015) Toughening mechanisms in composite materials. Woodhead Publishing Series in Composites Science and Engineering . Elsevier. ISBN 9781782422792

Capozzi, Luigi and Barresi, Antonello A. and Novajra, Giorgia and Oddone, Irene and Vitale-Brovarone, Chiara (2015) Modeling and characterization of intra-vial heterogeneity of lyophilized products using X-ray computed tomography. UNSPECIFIED.

Capozzi, Luigi and Boccardo, Gianluca and Barresi, Antonello A. and Pisano, Roberto (2015) Coupled bullet physics and computational fluid dynamics as a tool for modeling the freeze-drying of microparticles. Szent István University, Gödöllő, Hungary.

Thesis

Jenkins, Michael and Bailey, Ian (2015) Novel designs for undulator based positron sources. PhD thesis, Lancaster University.

McAlister, Craig and Rennie, Allan (2015) Reverse engineering of obsolete components for realisation using additive manufacturing. Masters thesis, Lancaster University.

Mitchell, James and Burt, Graeme (2015) Radiotherapy Linac Design. Masters thesis, Lancaster University.

Waters, Shaun and Aggidis, George (2015) Analysing the performance of the Archimedes screw turbine within tidal range technologies. Masters thesis, Lancaster University.

Woolley, Benjamin and Dexter, Amos and Syratchev, Igor and Burt, Graeme (2015) High power X-band RF test stand development and high power testing of the CLIC crab cavity. PhD thesis, Lancaster University.

Yan, Minghan and Campobasso, Sergio (2015) Time-domain and harmonic balance turbulent Navier-Stokes analysis of wind turbine aerodynamics using a fully coupled low-speed preconditioned multigrid solver. PhD thesis, Lancaster University.

Zidonis, Audrius and Aggidis, George (2015) Optimisation and efficiency improvement of pelton hydro turbine using computational fluid dynamics and experimental testing. PhD thesis, Lancaster University.

Patent

Bone, Adam (2015) METHOD FOR PREPARING SOFC ELECTROLYTE. EA021907 (B1).

Bromley, Michael Anthony (2015) Method of metal deposition. US 8,946,088 B2.

Other

Alavi, Marjan Alavi and Iulianelli, Adolfo Iulianelli and Rahimpour, Mohammad Reza Rahimpour and Eslamloueyan, Reza Eslamloueyan and Falco, Marcello De Falco De and Bagnato, Giuseppe Bagnato and Basile, Angelo Basile (2015) Fixed bed membrane reactors for ultrapure hydrogen production: modeling approach. UNSPECIFIED.