Items where Department is "Engineering" and Year is 1996

Journal Article

Adelson, Ronald and Turner, A. C. (1996) Spectrum analysis, aliasing and the perception of musical tones. Perception, 25 (5). pp. 609-617. ISSN 1468-4233

Baker, K and Richardson, A M and Dorey, A P (1996) Mixed signal test - Techniques, applications and demands. IEE Proceedings - Circuits, Devices and Systems, 143 (6). pp. 358-365. ISSN 1350-2409

Boxall, C and Kelsall, Geoff and Zhang, Zhao (1996) Photoelectrophoresis of colloidal iron oxides .2. Magnetite (Fe3O4). Journal of the Chemical Society, Faraday Transactions, 92 (5). pp. 791-802. ISSN 0956-5000

Bradshaw, Alan and Shao, Jindi (1996) Swing-up control of inverted pendulum systems. Robotica, 14 (4). pp. 397-405. ISSN 0263-5747

Clayton, H. and McAinsh, Martin R. and Mansfield, T. A. and Hetherington, A. M. and Knight, M. (1996) Effects of ozone on cytosolic calcium in Arabidopsis and tobacco seedlings. Journal of Experimental Botany, 47 (Supple). p. 3. ISSN 1460-2431

Collis, P.N. and Hargreaves, J.K. and White, G.P. (1996) A localised co-rotating auroral absorption event observed near noon using imaging riometer and EISCAT. Annales Geophysicae, 14 (12). pp. 1305-1316. ISSN 0992-7689

Dexter, A. C. and Jesson, S. (1996) Distributed parameter control of billet heating. IEE Colloquium (Digest), 1996 (264): 5. ISSN 0963-3308

Lees, M. J. and Taylor, J. and Chotai, A. and Young, P. C. and Chalabi, Z. S. and Tych, Wlodek (1996) Design and implementation of a proportional-integral-plus (PIP) control system for temperature, humidity and carbon dioxide in a glasshouse. Acta Horticulturae (ISHS), 406. pp. 115-124.

McAinsh, M. R. and Clayton, H. and Mansfield, T. A. and Hetherington, A. M. (1996) Changes in Stomatal Behavior and Guard Cell Cytosolic Free Calcium in Response to Oxidative Stress. Plant Physiology, 111 (4). pp. 1031-1042. ISSN 1532-2548

Mepsted, R. and Stephen, J. and Corlett, J. E. and Nogues, S. and Ayres, P. G. and Jones, H. G. and Baker, N. R. and Paul, N. D. (1996) Effects of enhanced UV-B radiation on pea (Pisum sativum L) grown under field conditions in the United Kingdom. Global Climate Change, 2. pp. 325-334.

Montgomery, L. T. and Abrams, S. R. and Hetherington, A. M. (1996) Structure-activity-relationships of ABA-induced responses in stomatal guard cells. Plant Physiology, 111 (1). p. 18. ISSN 1532-2548

Muir, E. A. and Bradshaw, A. (1996) Control law design for a thrust vectoring fighter aircraft using robust inverse dynamics estimation. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 210. ISSN 2041-3025

Olbrich, T and Mozuelos, R and Richardson, A and Bracho, S (1996) Design-for-test (DfT) study on a current mode DAC. IEE Proceedings - Circuits, Devices and Systems, 143 (6). pp. 374-379. ISSN 1350-2409

Olbrich, T and Richardson, A (1996) Design and self-test for switched-current building blocks. IEEE Design and Test of Computers, 13 (2). pp. 10-17. ISSN 0740-7475

Olbrich, T and Richardson, A M D and Bradley, D A (1996) Built-in self-test and diagnostic support for safety critical microsystems. Microelectronics Reliability, 36 (7-8). pp. 1125-1136. ISSN 0026-2714

Olbrich, T. and Bradley, D. A. and Richardson, A. M. D. (1996) Built-In Self-Test in Intelligent Microsystems as a Contributor to System Quality and Performance. Quality Engineering, 8 (4). pp. 601-613. ISSN 1532-4222

Paoloni, C and DAgostino, S (1996) A practical approach based on a unilateral FET model for the design of a MMIC distributed amplifier. Microwave and Optical Technology Letters, 13 (4). pp. 219-221. ISSN 0895-2477

Pennarun, G I and Boxall, C and OHare, D (1996) Micro-optical ring electrode : Development of a novel electrode for photoelectrochemistry. Analyst, 121 (12). pp. 1779-1788. ISSN 0003-2654

Peyton, A. J. and Yu, Z. Z. and Lyon, G. (1996) An overview of electromagnetic inductance tomography: description of three different systems. Measurement Science and Technology, 7. pp. 261-271. ISSN 0957-0233

Porquet, M. G. and Azaiez, F. and Sharpey-Schafer, J. F. and Astier, A. and Bastin, G. and Beausang, C. W. and Bourgeois, C. and Clark, R. M. and Deloncle, I. and Duprat, J. and Gall, B. J.P. and Hannachi, F. and Joyce, M. J. and Kaci, M. and Korichi, A. and Coz, Y. L.E. and Meyer, M. and Perrin, N. and Poffe, N. and Redon, N. and Schück, C. and Sergolle, H. and Simpson, J. and Smith, A. G. and Wadsworth, R. (1996) Fission induced by heavy ions : new results from euro g am array. Acta Physica Polonica B, 27 (1-2). pp. 179-185. ISSN 0587-4254

Rehman, I. and Andrews, E.H. and Smith, R. (1996) In vitro degradation of poly(ester-urethanes) for biomedical applications. Journal of Materials Science: Materials in Medicine, 7 (1). pp. 17-20. ISSN 0957-4530

Rehman, I. and Harper, E.J. and Bonfield, W. (1996) In situ analysis of the degree of polymerization of bone cement by using FT-Raman spectroscopy. Biomaterials, 17 (16). pp. 1615-1619. ISSN 0142-9612

Rehman, I.U. (1996) Biodegradable polyurethanes : biodegradable low adherence films for the prevention of adhesions after surgery. JOURNAL OF BIOMATERIALS APPLICATIONS, 11 (2). pp. 182-257. ISSN 0885-3282

Richardson, A and Dorey, T (1996) Editorial: Mixed signal & analogue IC test technology. IEE Proceedings - Circuits, Devices and Systems, 143 (6). p. 357. ISSN 1350-2409

Robinson, T. R. and Honary, F. and Stocker, A. J. and Jones, T. B. and Stubbe, P. (1996) First EISCAT observations of the modification of F-region electron temperatures during RF heating at harmonics of the electron gyro frequency. Journal of Atmospheric and Terrestrial Physics, 58 (1-4). pp. 385-395.

Seward, D. W. and Garman, A. (1996) The software development process for intelligent robots. Computing and Control Engineering, 7 (2). pp. 86-92.

Seward, D. W. and Margrave, F. W. and Bradshaw, A. (1996) The anatomy of a humanoid robot. Robotica, 14 (4). pp. 437-443. ISSN 0263-5747

Turvey, G. J. (1996) Effect of load position on the lateral buckling of pultruded GRP cantilevers - correlations between experiment and theory. Composite Structures, 35 (1). pp. 33-47.

Turvey, G. J. (1996) Lateral buckling tests on rectangular cross-section pultruded GRP cantilever beams. Composites Part B: Engineering, 27 (1). pp. 35-42.

Turvey, G. J. and Osman, M. Y. (1996) Elastic and initial flexural failure analysis of unsymmetrically laminated cross-ply strips. Composites Part B: Engineering, 27 (5). pp. 505-518.

Webb, Alex A. R. and McAinsh, Martin R. and Mansfield, Terry A. and Hetherington, Alistair M. (1996) Carbon dioxide induces increases in guard cell cytosolic free calcium. The Plant Journal, 9 (3). pp. 297-304.

Webb, Alex A. R. and McAinsh, Martin R. and Taylor, Jane E. and Hetherington, Alistair M. (1996) Calcium Ions as Intracellular Second Messengers in Higher Plants. Advances in Botanical Research, 22. pp. 45-96.

Ye, J Q and Soldatos, K P (1996) Three-dimensional vibration of laminated composite plates and cylindrical panels with arbitrarily located lateral surfaces point supports. International Journal of Mechanical Sciences, 38 (3). pp. 271-281. ISSN 0020-7403

de Silva, D. L. R. and Hetherington, A. M. and Mansfield, T. A. (1996) Where does all the calcium go? Evidence of an important regulatory role for trichomes in two calcicoles. Plant, Cell and Environment, 19 (7). pp. 880-886. ISSN 1365-3040

Contribution in Book/Report/Proceedings

Brown, M. W. and Burge, S. E. and Bradley, D. A. (1996) An infrared sensor for an electric wheelchair obstacle avoidance system. In: Proceedings of the 5th mechatronics forum international conference :. UNSPECIFIED, Portugal, pp. 35-40.

Carter, R. G. and Cooke, F. and Neal, R. (1996) Action-centred learning in industry. In: Management of independent learning :. Routledge. ISBN 0749419490.

Castle, T. and Anderson, D. C. (1996) Modelling of an integrated supermarket refrigeration and heating system using natural refrigerants. In: Proceedings of the 6th international refrigeration conference :. UNSPECIFIED, Indiana.

Dover, Stephen J and Rennie, Allan and Bennett, Graham R. (1996) Rapid prototyping using electrodeposition of copper. In: Solid Freeform Fabrication Symposium 1996 :. University of Texas at Austin, pp. 191-198. ISBN 1053-2153

Dover, Stephen J and Rennie, Allan and Bennett, Graham R. (1996) The wear of High Speed Selective Jet Electrodeposition electrodes when used as EDM tools. In: Proceedings of the Second National Conference on developments in rapid prototyping and tooling :. Mechanical Engineering Publications Ltd, pp. 187-199. ISBN 1-86058-048-3

French, M. J. and Bracewell, R. H. (1996) The systematic design of economic wave energy converters. In: Proceedings of the 6th international offshore and polar engineering conference (ISOPE) :. International Society of Offshore and Polar Engineers, pp. 106-109. ISBN 1880653222.

Holland, I. and Bradshaw, I. (1996) Identification and control of a novel hybrid microwave and radiant furnace. In: Proceedings of the 5th UK mechatronics forum international conference :. UNSPECIFIED.

Honary, B. and Markarian, G. and Marple, S. (1996) Trellis decoding of block codes: Practical approach. In: Communication Technology Proceedings, 1996. ICCT'96., 1996 International Conference on :. UNSPECIFIED, Beijing, China, pp. 525-527.

Honary, B. and Markarian, G. and Marple, S. R. (1996) Two-stage trellis decoding of RS codes based on the Shannon product. In: Proceedings of the 1996 International Symposium on Information Theory and its Applications :. UNSPECIFIED, pp. 282-285.

Kumar, L. and Carter, R. G. (1996) 3-D simulation of a soft-landing tilted electric field collector for linear beam tubes. In: Proceedings of the Asia-Pacific microwave conference :. UNSPECIFIED, New Delhi.

Lyon, G. and Peyton, A. J. and Yu, Z. Z. and Beck, M. S. (1996) Developments in electromagnetic tomography instrumentation. In: IEE Colloguium on Advances in electrical Tomography (Digest No: 1196/143) :. IEEE, London, 12/1-12/4.

Margrave, F. W. and Nagy, Z. (1996) A transputer based flexible robot controller. In: Fast Reconfiguration of Robotic and Automation Resources, IEE Colloquium on :. IET Press, 8/1-8/6.

Nagy, Z. and Bradshaw, A. (1996) On development of a transputer based robot control system. In: Proceedings of the 5th international workshop on robotics in Alpe-Adria-Danube region :. Hungarian Robotics Association, Budapest, pp. 125-130.

Nagy, Z. and Bradshaw, A. (1996) A flexible real-time transputer based control system. In: Proceedings of the 5th UK mechatronics forum international conference :. UNSPECIFIED, Portugal.

Nagy, Z. and Bradshaw, A. (1996) A flexible, transputer based robot control. In: Proceedings of the international workshop on advanced robotics and intelligent machines :. UNSPECIFIED, Manchester.

Nagy, Z. and Bradshaw, A. (1996) A transputer based, flexible, real-time control system for robotic manipulators. In: Proceedings of the UK UKACC international conference on control '96 :. UNSPECIFIED, Exeter.

Olbrich, T and Liberali, V and Maloberti, F and Richardson, Andrew (1996) Design-for-test strategies for analogue and mixed-signal integrated circuits. In: 38TH MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS, PROCEEDINGS, VOLS 1 AND 2 :. Eubios Ethics Institute, NEW YORK, pp. 1139-1144. ISBN 0-7803-2973-2

Olbrich, T. and Perez, J. and Grout, I. and Richardson, A. and Ferrer, C. (1996) Defect-oriented vs. chematic-level based fault simulation for mixed-signal ICs. In: Proceedings of the international test conference 1996 :. UNSPECIFIED, Washington DC, pp. 511-520. ISBN 0780335406

Seward, D. W. and Margrave, F. W. and Sommerville, I. and Morrey, R. (1996) LUCIE the robot excavator - design for system safety. In: Proceedings of the 1996 IEEE international conference on robotics and automation :. IEEE, Minneapolis, pp. 936-968. ISBN 0-7803-2988-0

Seward, D. W. and Quayle, S. (1996) System architectures and safety for mobile construction robots. In: Proceedings of the 13th international symposium on robotics in construction :. Japan Robot Association (JARA), Tokyo, Japan, pp. 727-732.

Seward, D. W. and Ward, J. and Findlay, J. and Kinniburgh, H. (1996) Precise on-site positioning of a piling rig. In: Proceedings of the Trimble 1996 surveying and mapping conference :. UNSPECIFIED, California, pp. 183-189.

Seward, D. W. and Ward, J. and Findlay, J. and Kinniburgh, H. (1996) The automation of piling rig positioning using satellite GPS. In: Proceedings of the 13th international symposium on robotics in construction :. Japan Robot Association (JARA), Tokyo, Japan, pp. 223-230.

Taylor, C. J. and Young, P. C. and Chotai, A. (1996) PIP optimal control with a risk sensitive criterion. In: UKACC International Control Conference :. UNSPECIFIED, pp. 959-964.

Taylor, C. J. and Young, P. C. and Chotai, A. and Dixon, R. (1996) Structural and predictive aspects of Proportional-Integral-Plus (PIP) control. In: UKACC International Conference on Control :. IEEE, pp. 1374-1379. ISBN 0-85296-668-7

Taylor, C. J. and Young, P. C. and Chotai, A. and Tych, W. and Lees, M. J. (1996) The importance of structure in PIP control design. In: UKACC International Control Conference :. UNSPECIFIED, pp. 1196-1201.

Taylor, C. James and Lees, Matthew and Young, Peter and Minchin, P. E. H. (1996) True Digital Control of carbon dioxide in agricultural crop growth experiments. In: International Federation of Automatic Control 13th Triennial World Congress :. Elsevier.

Taylor, C. James and Young, Peter and Chotai, Arunkumar (1996) True Digital Control of interurban traffic networks. In: International Federation of Automatic Control 13th Triennial World Congress :. Elsevier.

Turvey, G. J. (1996) Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project. In: Structural design of polymer composites: EUROCOMP design code and handbook :. E. and FN Spon, London, pp. 719-741. ISBN 0419194509.

Turvey, G. J. and Brooks, R. J. (1996) Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions. In: Proceedings of the 1st international conference on composites in infrastructure (ICCI '96) :. University of Arizona, pp. 651-664.

Turvey, G. J. and Cooper, C. (1996) Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections. In: Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II) :. Canadian Society for Civil Engineering, Montreal, pp. 927-934.

Turvey, G. J. and Cooper, C. (1996) Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics. In: ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential :. Woodhead Publishing Limited, Cambridge, pp. 295-300. ISBN 1855733048.

Turvey, G. J. and Drinali, H. (1996) Full-range response of circular steel plates subjected to combined transverse pressure and edge compression. In: Advances in computational techniques for structural engineering :. Civil-Comp Press, Edinburgh. ISBN 0948749458

Ye, Jianqiao (1996) Analytical solutions of composite plate and shell structures and their engineering applications. In: Advances in Applied Mechanics Research in the UK :. Science Press, Beijing.

Ye, Jianqiao and Soldatos, K P (1996) Axisymmetric vibration analysis of laminated hollow spheres composed of transversely isotropic layers. In: Proceedings of the 1996 Engineering Systems Design and Analysis Conference :. American Society of Mechanical Engineers. ISBN 0791814963

Contribution to Conference

Honary, B. and Markarian, G. and Marple, S. (1996) Trellis decoding of block codes: Practical approach. In: ICCT '96, 1996-05-01, Beijing, China.

Richardson, Andrew and Vermeiren, W and Straube, B and Olbrich, Thomas (1996) Integrated Test Support for Micro- Electro-Mechanical-Systems (MEMS). In: 5th International Conference on Micro-, Electro-, Opto-, Mechanical Systems and Components,, 1996-09-17 - 1996-09-19.

Patent

Honary, B. (1996) Adaptive multi-functional nested coding and synchronisation. 9625936.1.

Other

Baturone, I. and Huertas, J. L. and Solano, S. Sánchez and Richardson, A. M. (1996) Supply Current Monitoring for Testing CMOS Analog Circuits. UNSPECIFIED.