Lancaster EPrints

Items where Department is "Faculty of Science and Technology > Engineering" and Year is 1997

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | G | H | J | K | L | M | O | P | Q | R | S | T | Y | Z
Number of items: 69.

A

Adelson, Ronald (1997) Frequency estimation from few measurements. Digital Signal Processing, 7 (1). pp. 47-54. ISSN 1051-2004

B

Baturone, I and SanchezSolano, S and Richardson, A M and Huertas, J L (1997) Current-mode techniques for self-testing analogue circuits. In: IDDQ Testing, 1997. Digest of Papers., IEEE International Workshop on. I E E E, COMPUTER SOC PRESS, LOS ALAMITOS, pp. 33-37. ISBN 0-8186-8123-3

Bradshaw, A. and Counsell, J. M. (1997) Computer aided conceptual design '97 : proceedings of the 1997 Lancaster International Workshop on Engineering Design CACD'97. Lancaster University: Centre for the Study of Environmental Change., Lancaster. ISBN 1862200262.

C

Carter, R. G. and Ball, E. M. and Brady, M. B. (1997) Magnetron frequency twinning. In: Proceedings of the ESA/NATO workshop on microwave tubes for space, military and commercial applications. ESTEC, The Netherlands, p. 127.

Carter, R. G. and Wang, P. (1997) Equivalent circuit modelling of helix slow-wave structures. In: Proceedings of the ESA/NATO workshop on microwave tubes for space, military and commercial applications. ESTEC, The Netherlands, p. 127.

Carter, Richard G. and Wang, P. (1997) Design of helix applicators for microwave heating. Journal of Microwave Power and Electromagnetic Energy, 32 (4). pp. 199-204. ISSN 0832-7823

Chippendale, Paul and Honary, Bahram (1997) Binary image compression and coding techniques for HF radio transmission. In: HF Radio Systems and Techniques, Seventh International Conference on (Conf. Publ. No. 441). IEEE, Nottingham, UK, pp. 130-134. ISBN 0-85296-688-1

Collis, P.N. and Hargreaves, J.K. (1997) Co-ordinated studies using imaging riometer and incoherent scatter radar. Journal of Atmospheric and Solar-Terrestrial Physics, 59 (8). pp. 873-890. ISSN 1364-6826

Collis, P.N. and Hargreaves, J.K. and Howarth, W.G. and White, G.P. (1997) Joint imaging riometer - incoherent scatter radar observations: A four-dimensional perspective on energetic particle input to the auroral mesosphere. Advances in Space Research, 20 (6). pp. 1165-1168. ISSN 0273-1177

Coulton, Paul and Hannaford, Colin and Honary, Bahram (1997) Coding for Both Protection and Synchronisation. In: Communications coding and signal processing. Electronic & electrical engineering research studies. Communications systems, techniques, and applications series . Research Studies Press Ltd., Taunton, pp. 133-147. ISBN 0 86380 221 4

Counsell, J. M. (1997) Design principles for mechatronic systems. In: Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Lancaster University: Lancaster Engineering Design Centre, Lancaster, pp. 17-26. ISBN 1862200262

D

DAgostino, S and Paoloni, C (1997) Experimental validation of a large-signal MESFET model for submicron-gate-length devices. Microwave and Optical Technology Letters, 15 (4). pp. 227-229. ISSN 0895-2477

Dickinson, S. J. and Bradshaw, A. (1997) Validation and certification of civil engineering structural design software. In: Proceedings of the worldwide ECCE symposium: computers in the practice of building and civil engineering. UNSPECIFIED, Finland.

da Silva, J. C. and Bennett, D. and Counsell, J. M. (1997) Computational agent to integrate expert system and simulation language. In: Proceedings of the 9th European simulation symposium. UNSPECIFIED, Germany.

da Silva, J. C. and Cheung, H. F. (1997) Computer support environment applying object-oriented methods for hydraulic systems design. In: Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Lancaster University: Lancaster Engineering Design Centre, Lancaster, pp. 117-131. ISBN 1862200262.

E

Edwards, Reuben and Honary, Bahram and Farquhar, S. and Noble, A. (1997) Advanced bandwidth efficient block coded modulation over fading channels. In: MILCOM 97 Proceedings. IEEE, Monterey, California, pp. 808-811. ISBN 0-7803-4249-6

G

Gazey, N. G. J. and del Pozo, C. F. and Williams, P. J. S. and Sedgemore, K. J. F. and Honary, F. and Smith, P. N. (1997) Multi-instrument case studies of arc dynamics and substorm effects. In: Proceedings of the 8th EISCAT international workshop. UNSPECIFIED, Leicester.

Green, S. M. and Grant, D. M. and Kelly, N. R. (1997) Powder metallurgical processing of Ni-Ti shape memory alloy. POWDER METALLURGY, 40 (1). pp. 43-47. ISSN 0032-5899

Green, S. M. and Grant, D. M. and Wood, J. V. (1997) Shape Memory Transformation in Mechanically Alloyed Ni-50at % Ti. Journal de Physique 4, 07 (C5). pp. 351-356. ISSN 1155-4339

Green, S. M. and Grant, D. M. and Wood, J. V. (1997) XPS characterisation of surface modified Ni-Ti shape memory alloy. Materials Science and Engineering: A, 224 (1–2). pp. 21-26. ISSN 0921-5093

H

Honary , B. (1997) Data encoding system. 2576002.

Honary, B. and Markarian, G. and Marple, S.R. (1997) Trellis decoding of Reed-Solomon codes: a practical approach. In: Communications coding and signal processing. Research Studies Press Ltd., Taunton, pp. 133-147. ISBN 0-86380-221-4

Honary, F. and Stocker, A. J. and Robinson, T. R. and Rietveld, M. T. and McCrea, I. W. (1997) Multi-diagnostic observations of heater-induced effects at pump frequencies close to the electron gyroharmonics. In: Proceedings of the 8th EISCAT international workshop. UNSPECIFIED, Leicester.

Hunt, B. and Honary, Bahram and Maundrell, M. and Arthur, P. (1997) Trellis extracted synchronisation techniques applicable to automatic link establishment. In: MILCOM 97 Proceedings. IEEE, Monterey, California, 43–47. ISBN 0-7803-4249-6

J

Joyce, M. (1997) How does boron stop neutrons? Third Millennium Magazine.

Joyce, M. (1997) The art (or science?) of creativity. Third Millennium Magazine.

Joyce, M. and Regan, P. (1997) Fusion finds the Midas touch. Daily Telegraph: Science.

Joyce, M. and Regan, P. (1997) In the Alchemist's chair. Third Millennium Magazine.

K

Kolios, G. and Wright, K. L. and Jordan, N. J. and Leithead, J. B. and Murphy, C. T. and Robertson, D. A. F. and Westwick, J. (1997) Regulation of inflammatory mediator production in human colonic epithelial cells. Hellenic Journal of Gastroenterology, 10 (2). pp. 135-147. ISSN 1012-0424

L

Lees, Matthew and Taylor, James and Young, Peter and Chotai, Arunkumar (1997) Modelling and control design for open top chambers used in plant physiology climate change experiments. In: International Federation of Automatic Control 3rd symposium on Modelling and Control in Biomedical Systems including Biological Systems. Elsevier.

Liang, Zhicheng and Ma, Xiandong and Wang, Like and Kuffel, R and Jiang, Xiao (1997) Real-time digital simulator (RTDS) and it applications. Dianli Xitong Zidonghue/Automation of Electric Power Systems, 21 (10). pp. 61-64.

Lyon, G. M. and Peyton, A. J. (1997) Development of a modular data acquisition system for electrical tomography. In: Proceedings of the conference on frontiers in industrial process tomography II. UNSPECIFIED, The Netherlands.

Lyon, G. M. and Yu, Z. Z. and Peyton, A. J. (1997) Development in electromagnetic tomography for industrial applications. In: Proceedings of the progress in electromagnetics research symposium: PIERS. UNSPECIFIED, Hong Kong.

M

McAinsh, Martin R. and Brownlee, Colin and Hetherington, Alistair M. (1997) Calcium ions as second messengers in guard cell signal transduction. Physiologia Plantarum, 100 (1). pp. 16-29. ISSN 0031-9317

Melling, G. and Bradley, D. A. and McKee, D. and Widden, M. B. (1997) The development of a rapid-prototyping technique for mechatronic-augmented heavy plant. Automation in Construction, 5 (5). pp. 365-378.

O

Olbrich, T and Grout, I A and Aimine, Y E and Richardson, A M and Contensou, J (1997) A new quality estimation methodology for mixed-signal and analogue ICs. In: European Design and Test Conference, 1997. ED&TC 97. Proceedings. I E E E, COMPUTER SOC PRESS, LOS ALAMITOS, pp. 573-580. ISBN 0-8186-7786-4

Olbrich, T and Richardson, A and Vermeiren, W and Straube, B (1997) Integrating testability into microsystems. Microsystem Technologies, 3 (2). pp. 72-79. ISSN 0946-7076

Olbrich, T. and Grout, I. and Eben Aimine, Y. and Richardson, A. and Contensou, J. (1997) A new methodology for IC product quality estimation. In: Proceedings of the European design and test conference (ED&TC '97). IEEE Computer Society Press, Paris. ISBN 0818677864.

P

Paoloni, C and DAgostino, S (1997) Design procedure for monolithic matrix amplifier. IEEE Transactions on Microwave Theory and Techniques, 45 (1). pp. 135-139. ISSN 0018-9480

Pennarun, G I and Boxall, C and OHare, D (1997) The micro-optical ring electrode: Development of a novel electrode for photoelectrochemistry. In: Proceedings of the Symposium on Chemical and Biological Sensors and Analytical Electrochemical Methods. ELECTROCHEMICAL SOCIETY INC, PENNINGTON, pp. 1039-1051. ISBN 1-56677-147-1

Q

Quinton, John N. and Edwards, G. M. and Morgan, R. P. C. (1997) The influence of vegetation species and plant properties on runoff and soil erosion: results from a rainfall simulation study in south east Spain. Soil Use and Management, 13 (3). pp. 143-148. ISSN 0266-0032

R

Rennie, Allan and Bennett, Graham R. (1997) Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry. In: Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. UNSPECIFIED, pp. 399-403. ISBN 0-333-71655-8

Rennie, Allan and Bennett, Graham R. (1997) A system for the generation of liquid metal droplets using electromotive forces. In: Proceedings World Congress: Manufacturing Technology Towards 2000. James Cook University of North Queensland, pp. 501-510. ISBN 0864436416

Richardson, A and Sharif, E and Betts, W R (1997) Fault-tolerant and self-testable architectures for zero failure electronics. In: AUTOMOTIVE ELECTRONICS - AUTOTECH'97. IMechE seminar publication ; 1997-10 . MECHANICAL ENGINEERING PUBL, EDMUNDS, pp. 133-142. ISBN 1860581153 9781860581151

Rietveld, M. T. and Honary, F. and Robinson, T. R. and Thide, B. and Stubbee, P. (1997) An HF magnetospheric radar for EISCAT. In: Proceedings of the 8th EISCAT international workshop. UNSPECIFIED, Leicester.

S

Scott, J. and Bradley, D. A. and Seward, D. W. and Adelson, R. M. and Pengelly, M. (1997) The development of an interactive simulation of site information technology systems in relation to construction automation. In: Proceedings of the 14th international symposium on robotics in construction. Carnegie Mellon University, Pittsburgh, pp. 154-165.

Seward, D. W. and Quayle, S. (1997) LUCIE - Lancaster University computerised intelligent excavator. Circuit Cellar - The Magazine For Computer Applications, 79. pp. 67-73.

Seward, D. W. and Quayle, S. and Sommerville, I. and Morey, R. (1997) Developing the safety case for large mobile robots. In: Advances in safety and reliability : proceedings of the ESREL '97 International Conference on Safety and Reliability, 17 - 20 June 1997, Lisbon, Portugal. Pergamon, Oxford, pp. 2293-2300. ISBN 0080428355.

Seward, D. W. and Scott, J. and Findlay, J. and Kinniburgh, H. (1997) The automation of piling rig positioning using satellite GPS. Automation in construction, 6 (3). pp. 229-240.

Sharif, E. and Richardson, A. and Dorey, T. (1997) Reconfigurable smart sensors for dependable systems. In: Hardware Systems for Dependable Applications (Digest No: 1997/335), IEE Half-Day Colloquium on. IEEE, 2/1 -2/6.

Sommerville, I. and Seward, D. W. and Morey, R. and Quayle, S. (1997) Safe systems architectures for autonomous robots. In: Proceedings of the safety critical systems conference. UNSPECIFIED, Brighton.

Sonander, Sean and Honary, Bahram (1997) On generalised concatenated codes. In: Cryptography and Coding. Lecture Notes in Computer Science . Springer, Berlin, pp. 307-316. ISBN 3-540-63927-6

T

Taylor, James and Whittaker, Joseph and Young, Peter and Chotai, Arunkumar (1997) Forecasting and control of interurban traffic networks using a state space formulated traffic model. In: International Federation of Automatic Control 8th symposium on Transportation systems. UNSPECIFIED.

Taylor, James and Young, Peter and Chotai, Arunkumar (1997) Forecasting, simulation and control of interurban traffic networks. In: 12th International Conference on Systems Engineering. UNSPECIFIED.

Taylor, James and Young, Peter and Chotai, Arunkumar (1997) Robust PIP control of multivariable stochastic systems. In: 12th International Conference on Systems Engineering. UNSPECIFIED.

Taylor, James and Young, Peter and Chotai, Arunkumar and Mcleod, A. (1997) Modelling and control design for Free Air CO2 Enrichment (FACE) systems used in plant physiology climate change experiments. In: International Federation of Automatic Control 3rd Workshop on Mathematical and Control Applications in Agriculture and Horticulture. Pergamon.

Turvey, G. J. (1997) Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections. Composite Structures, 38 (1). pp. 3-16.

Turvey, G. J. and Drinali, H. (1997) Non-linear first yield analysis of circular plates subjected to combined uniform pressure and edge compression. Computers & Structures, 63 (4). pp. 769-773.

Turvey, G. J. and Salehi, M. (1997) Circular plates with one diametral stiffener: an elastic large deflection analysis. Computers & Structures, 63 (4). pp. 775-783.

Turvey, G. J. and Salehi, M. (1997) Full-section yield analysis of uniformly loaded sector plates. In: Trends in structural mechanics: theory, practice and education. Solid mechanics and its applications (v. 54). Kluwer Academic, Dordrecht; London, pp. 289-298. ISBN 0792346033

Y

Yavuz, H. and Bradshaw, A. and Dogantan, Z. S. (1997) Navigation system design for an individual excavator robot. In: Proceedings of Mamkon '97. UNSPECIFIED, Istanbul, pp. 489-495.

Ye, J Q (1997) Axisymmetric vibration analysis of laminated hollow cylinders with ring stiffeners. Composite Structures, 38 (1-4). pp. 151-156. ISSN 0263-8223

Ye, J Q (1997) Axisymmetric vibration of laminated annular plates composed of transversely isotropic layers. Journal of Sound and Vibration, 205 (2). pp. 250-256. ISSN 0022-460X

Ye, J Q (1997) A three-dimensional free vibration analysis of cross-ply laminated rectangular plates with clamped edges. Computer methods in applied mechanics and engineering, 140 (3-4). pp. 383-392. ISSN 0045-7825

Ye, J Q and Soldatos, K P (1997) Three-dimensional vibrations of cross-ply laminated hollow cylinders with clamped edge boundaries. Journal of vibration and acoustics-Transactions of the asme, 119 (3). pp. 317-323. ISSN 1048-9002

Ye, J Q and Williams, F W (1997) Quadratic representation of a nonlinear dynamic stiffness matrix and related eigenvalue problems. Computer methods in applied mechanics and engineering, 146 (3-4). pp. 313-323. ISSN 0045-7825

Ye, Jianqiao (1997) Vibration of laminated composite panels with intermediate point supports and clamped edges. In: Proceedings of the 2nd International Symposium on Structures and Foundations in Civil Engineering. Department of Civil and Structural Engineering, The Hong Kong University of Science and Technology, Hong Kong, pp. 103-108. ISBN 9628252011

Yu, Z. Z. and Peyton, A. J. (1997) Development of sensor arrays for electromagnetic tomography. In: Proceedings of the conference on frontiers in industrial process tomography II. UNSPECIFIED, The Netherlands.

Z

Zhang, L. and Bradley, D. A. and Seward, D. W. (1997) The simulation and modelling of safety systems for construction robots. In: Proceedings of the 14th international symposium on robotics in construction. Carnegie Mellon University, Pittsburgh, pp. 224-229.

This list was generated on Sat Nov 22 02:28:27 2014 GMT.