Items where Department is "Engineering" and Year is 2006
A
Adamopoulos, George and Garcia, Enric and Godet, Christian and Drévillon, Bernard and Silva, Ravi and Robertson, John (2006) Ellipsometry « fingerprinting » of amorphous carbon alloys. In: Materials Research Society :. UNSPECIFIED, FRA.
Adamopoulos, George and Heiser, T. and Giovanella, U. and Ould-Saad, S. and van de Wetering, K.I. and Brochon, C. and Zorba, T. and Paraskevopoulos, K.M. and Hadziioannou, G. (2006) Electronic transport properties aspects and structure of polymer-fullerene based organic semiconductors for photovoltaic devices. Thin Solid Films, 511-51. 371–376. ISSN 0040-6090
Aggidis, George (2006) Fluid machinery and energy research on ocean energy and hydropower. In: Proceedings of the IMechE fluid machinery group, 2006-01-01.
Aggidis, George (2006) NW hydro resource model. In: Proceedings of the marine energy seminar, 2006-01-01.
Aggidis, George (2006) Renewable energy research : ocean energy and hydropower. In: Lancaster University, Faculty of Science & Technology Christmas Conference, 2006-01-01.
Aggidis, George (2006) Resourceful solutions for hydro in the UK. International Water Power and Dam Construction, 58 (9). pp. 24-26. ISSN 0306-400X
Aggidis, George and Howard, D. C. and Rothschild, R. and Widden, Martin (2006) Maximising the benefits of hydropower by developing the North-West England hydro resource model. Proceedings of the International Hydro Power & Dams Construction Journal, 7 (1).
Aggidis, George A. (2006) Hydro and Renewable Energy. (Presentation). In: Science & Technology Conference, 2006-12-20. (Unpublished)
Aggidis, George A. and Bradshaw, A. and McCabe, A. and Meadowcroft, J. (2006) Developments in the design of the PS Frog MK5 Wave Energy Converter. Renewable Energy, 31 (2). pp. 141-151. ISSN 0960-1481
Aggidis, George A. and Howard, D. C. and Wright, S. M. (2006) A hydro power resource model for North West England. In: In water and the landscape : the landscape of ecology of freshwater ecosystems : Proceedings of the 14th annual IALE(UK) conference :. UNSPECIFIED, pp. 41-46.
Aggidis, George A. and Howard, D. C. and Wright, S. M. and Scott, R. (2006) Energy source or sink? : The role of the Uplands in meeting our energy targets. In: Proceedings of the international Uplands centre conference on sustainable Uplands. :. UNSPECIFIED.
Aggidis, George A. and Howard, David C. and Wright, Simon M. and Scott, Richard (2006) Energy source or sink? : The role of Uplands in meeting our energy targets. The International Journal of Biodiversity Science and Management, 2 (3). pp. 196-199. ISSN 1745-1604
Aggidis, George A. and Huang, M. (2006) Research on wave energy converters and mooring systems in the United Kingdom. Water Resources and Power Journal (in Chinese), 24 (4). pp. 37-40.
Aggidis, George A. and McCabe, A and Widden, M and Yavuz, H (2006) Calculation of the performance of resonant wave energy converters in real seas. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 220 (3). pp. 117-128. ISSN 1475-0902
Aiouache, Farid and Oyama, Hiro and Kitagawa, Kuniyuki (2006) Spatial near-infrared imaging of hydroxyl band coverage on ceria-based catalysts. AIChE Journal, 52 (4). pp. 1516-1521. ISSN 0001-1541
Ambattu, Praveen and Hamsakutty, V and Yohannan, J and Mathew, KT (2006) Microstripline fed Cylindrical Dielectric Resonator Antenna with a Coplanar Parasitic Strip. Progress In Electromagnetics Research M, 60. pp. 143-152. ISSN 1937-8726
Ambattu, Praveen and Hamsakutty, V and Yohannan, J and Mathew, KT (2006) Microstripline fed Half-Cylindrical Dielectric Resonator Antenna for 2.4 GHz WLAN application. Microwave and Optical Technology Letters, 48 (4). pp. 724-726. ISSN 0895-2477
Ambattu, Praveen and Hamsakutty, V and Yohannan, J and Mathew, KT (2006) A strip loaded dielectric resonator antenna for circular polarisation. Microwave and Optical Technology Letters, 48 (7). pp. 1354-1356. ISSN 0895-2477
Aminaei, A. and Honary, F. and Kavanagh, A. J. and Spanswick, E. and Viljanen, A. (2006) Characteristics of night-time absorption spike events. Annales Geophysicae, 24 (7). pp. 1887-1904. ISSN 0992-7689
Anapolitanos, I and Lam, Dennis and Ye, Jianqiao (2006) Strengthening ductile metallic structures using externall bonded fibre reinforced composite materials. In: Steel and Aluminium Structures, ICSAS'07: : Proceedings of the Sixth International Conference on Steel and Aluminium Structures. Oxford Brookes University, Oxford. ISBN 9780955625404
Andrieux, Fabrice and Boxall, Colin and Taylor, Robin and Mason, C. (2006) Modelling the Hydrolysis of Actinide Complexed Hydroxamic Acid Ligands. In: RSC Special Publication : Recent Advances in Actinide Science. Royal Society of Chemistry, Cambridge, pp. 626-628. ISBN 978-0-85404-678-2
Andrieux, Fabrice P. L. and Boxall, Colin and O'Hare, Danny (2006) The micro-optical ring electrode. 3: Transient photocurrent studies of photophysical-electrochemical and photophysical-chemical-electrochemical systems. Journal of Physical Chemistry B, 110 (32). pp. 16148-16156. ISSN 1520-6106
Andrieux, Fabrice Pierre Louis and Boxall, C. and O'Hare, D. (2006) The micro-optical ring electrode Part 2 : theory for the transport limited, steady-state photocurrent. Journal of Electroanalytical Chemistry, 589 (2). pp. 177-186. ISSN 0022-0728
Arefi, Mohammad Mehdi and Montazeri, Allahyar and Poshtan, Javad and Jahed-Motlagh, Mohammad Reza (2006) Nonlinear model predictive control of chemical processes with a Wiener identification approach. In: Industrial Technology, 2006. ICIT 2006. IEEE International Conference on :. IEEE, IND, pp. 1735-1740. ISBN 978-1-4244-0725-5
Ashrafi, M. and Kosch, M. J. and Honary, F. (2006) Heater-induced altitude descent of the EISCAT UHF ion line enhancements: Observations and modelling. Advances in Space Research, 38 (11). pp. 2645-2652. ISSN 0273-1177
Aspinall, Michael and Joyce, Malcolm J. (2006) Counter terrorism using commercial hardware - the 55,000,000 km/hour speed trap. In: Proceedings of the SET for Britain House of Commons science exhibition. :. UNSPECIFIED.
B
Bakari, Mohamed and Seward, Derek W. (2006) Human arm-like mechanical manipulator, the design and development of a multi-arm mobile robot for nuclear decommissioning. In: Proceedings of the 3rd international conference on informatics in control, automation and robotics (ICINCO 2006). :. UNSPECIFIED.
Bakari, Mohamed and Seward, Derek W. and Shaban, E. M. and Agate, Rahee (2006) Multi-arm mobile robot for hazardous nuclear decommissioning tasks. In: Proceedings of the 23rd international symposium on automation and robotics in construction. :. UNSPECIFIED.
Baker, Nick J. and Stallard, T. J. and McCabe, A. P. (2006) Investigation of width on the point absorber effect for a surging collector. In: Proceedings of the international conference on ocean energy. :. UNSPECIFIED.
Bamford, Will and Coulton, Paul and Edwards, Reuben (2006) A Surrealist Inspired Mobile Multiplayer Game: Fact or Fish? In: 1st World Conference for Fun 'n Games, 2006-06-26 - 2006-06-28, University of Central Lancashire.
Bamford, William and Coulton, Paul and Edwards, Reuben (2006) Location Based Mobile Blogging. In: Information and Communication Technologies, 2006. ICTTA '06. 2nd :. IEEE, Damascus, Syria. ISBN 0-7803-9521-2
Bamford, William and Coulton, Paul and Edwards, Reuben (2006) A Massively Multi-Authored Mobile Surrealist Book. In: ACE '06 Proceedings of the 2006 ACM SIGCHI international conference on Advances in computer entertainment technology :. ACM, Hollywood, USA. ISBN 1-59593-380-8
Bellantoni, L. and Edwards, H. and Foley, M. and Khabiboulline, T. and Mitchell, D. and Rowe, A. and Solyak, N. and Goudket, P. and Burt, G. and Dexter, A. C. and Koeth, T. and Adolphsen, C. (2006) Status of 3.9-GHz deflecting-mode (crab) cavity R&D. In: 23rd International Linear Accelerator Conference, LINAC 2006, 2006-08-21 - 2006-08-25.
Bhagate, Kiran A. and Pawar, Prashant and Singh, Arbind Kumar and Ye, Jianqiao (2006) Accuracy of design sensitivity for optimization of structural using small strain theory by finite element method. In: III European Conference on Computational Mechanics : Solids, Structures and Coupled Problems in Engineering: Book of Abstracts. Springer, Berlin, p. 711. ISBN 1402049943
Bienstman, P and Selleri, S and Rosa, L and Uranus, H.P. and Hopman, W.C.L. and Costa, R. and Melloni, A. and Andreani, L.C. and Hugonin, J.P. and Lalanne, P. and Pinto, Domenico and Obayya, Salah and Dems, M. and Panajotov, K. (2006) Modelling leaky photonic wires: A mode solver comparison. Optical and Quantum Electronics, 38 (9-11). pp. 731-759. ISSN 1572-817X
Bothwell, John H. F. and Brownlee, Colin and Hetherington, Alistair M. and Ng, Carl K.-Y. and Wheeler, Glen L. and McAinsh, Martin (2006) Bioloistic delivery of Ca2+ dyes into plant and algal cells. Plant Journal, 46 (2). pp. 327-335. ISSN 0960-7412
Boxall, Colin (2006) Mesoporous and Nanoparticulate Metal Oxides: Applications in New Photocatalysis. In: Proceedings of the 10th Asian Conference on Solid State Ionics : Advanced Materials for Emerging Technologies. World Scientific, LKA, p. 788. ISBN 981-256-877-8
Boxall, Colin and Taylor, Robin and LeGurun, G. (2006) The Application of Colloidal Photocatalysis in Actinide Photoredox Chemistry. In: RSC Special Publication : Recent Advances in Actinide Science. Royal Society of Chemistry, Cambridge, pp. 113-115. ISBN 978-0-85404-678-2
Brownlee, C. and Bothwell, J. H. F. and McAinsh, Martin and Hetherington, A. M. and Coelho, S. (2006) Polarised development in the brown algae : common mechanisms and unique features. Comparative Biochemistry and Physiology - Part A: Molecular and Integrative Physiology, 143 (4 Supp). S100. ISSN 1095-6433
Brunetti, F. and Lugli, P. and Fiori, A. and Orlanducci, S. and Sessa, V. and Tamburri, E. and Toschi, F. and Terranova, M.L. and Riccitelli, R. and Petrolati, E. and von Neumann, L. and Paoloni, C. and Reale, A. and di Carlo, A. and Ciorba, A. and Cirillo, M. and Merlo, V. (2006) Realization of a carbon nanotube-based triode. In: Nanotechnology, 2006. IEEE-NANO 2006. Sixth IEEE Conference on :. IEEE, pp. 246-249. ISBN 1-4244-0077-5
Burbidge, M. and Georgopoulos, K. and Lechner, A. and Richardson, A. (2006) Bit-stream manipulation for SD modulator failure mode analysis. In: Proceedings of the 11th IEEE European test symposium. :. UNSPECIFIED.
Burt, Graeme and Beard, C. and Dexter, Amos and Goudket, P. and McIntosh, P. and Wooldridge, E. (2006) Coupler design considerations for the ILC crab cavity. Working Paper. UNSPECIFIED.
Burt, Graeme and Dexter, Amos and Bellantoni, C. and Beard, P. and Goudket, P. (2006) Analysis of Wakefields in the ILC crab cavity. In: Proceedings of the EPAC 2006 conference. :. UNSPECIFIED.
Burt, Graeme and Dexter, Amos and Bellantoni, C. and Beard, P. and Goudket, P. (2006) Progress towards crab cavity solutions for the ILC. In: Proceedings of the EPAC 2006 conference. :. UNSPECIFIED.
Burt, Graeme and Goudket, P. and Dexter, Amos and Kalinin, A. (2006) Effect and tolerances of phase and amplitude errors in the ILC crab cavity. Working Paper. UNSPECIFIED.
C
Cao, Li and Zhao, Hua and Jiang, Xi and Kalian, Navin (2006) Numerical investigation into effect of fuel injection timing on CAI/HCCI combustion in a four-stroke GDI engine. International Journal of Computational Methods in Engineering Science and Mechanics, 7 (1). pp. 41-57. ISSN 1550-2295
Carroll, P. A. and Pinkerton, A. J. and Allen, J. and Syed, W. U. H. and Sezer, H. K. and Brown, P. and Ng, G. and Scudamore, R. and Li, L. (2006) The effect of powder recycling in direct metal laser deposition on powder and manufactured part characteristics. In: Proceedings of AVT-139 Specialists Meeting on Cost Effective Manufacture via Net Shape Processing :. NATO Research and Technology Organisation.
Carter, Richard and Adolphsen, C. and Beard, C. and Bellantoni, L. and Burt, G. and Chase, B. and Church, M. and Dexter, Amos and Dykes, M. and Edwards, H. and Goudket, P. and Jenkins, Richard and Jones, R. M. and Kalinin, A. and Khabiboulline, T. and Ko, K. and Latina, A. and Li, Z. and Ma, P. and McIntosh, P. and Ng, C. and Ser, I. (2006) Design of the ILC crab cavity system. UNSPECIFIED.
Chaudhry, A.A. and Haque, S. and Kellici, S. and Boldrin, P. and Rehman, I. and Khalid, F.A. and Darr, J.A. (2006) Instant nano-hydroxyapatite : A continuous and rapid hydrothermal synthesis. Chemical Communications (21). pp. 2286-2288. ISSN 1359-7345
Chehimi, Fadi and Coulton, Paul and Edwards, Reuben (2006) Advances in 3D Graphics for Smartphones. In: Information and Communication Technologies, 2006. ICTTA '06. 2nd :. IEEE, Damascus, Syria, pp. 99-104. ISBN 0-7803-9521-2
Chehimi, Fadi and Coulton, Paul and Edwards, Reuben (2006) C++ Optimisations for Mobile Applications. In: Consumer Electronics, 2006. ISCE '06. 2006 IEEE Tenth International Symposium on :. IEEE, St.Petersburg , Russia. ISBN 1-4244-0216-6
Chehimi, Fadi and Coulton, Paul and Edwards, Reuben (2006) Delivering 3D advertising to mobile phones. In: IEEE International Conference on Consumer Electronics, 2006-01-07 - 2006-01-11.
Chehimi, Fadi and Coulton, Paul and Edwards, Reuben (2006) A Novel 3D Game API for Symbian OS Smartphones. In: The Fourth Annual International Conference in Computer Game Design and Technology, 2006-11-15 - 2006-11-16.
Cheng, Chun-Yee and Dawson, Richard and Kelsall, Geoff and Robson, Anna (2006) Circulating Particulate Bed Cathode for Metal Recovery. In: 57th Annual Meeting of ISE, 2006-08-31 - 2006-09-05.
Chuter, Graham S. J. and Cloke, David J. and Green, Sarah M. and Partington, Paul F. (2006) MATERIALS TESTING AND VOLUMETRIC ANALYSIS OF EXPLANTED ABG I CUP INSERTS. Journal of Bone and Joint Surgery, British Volume, 88-B (SUPP I). p. 246.
Clemson, Helen and Coulton, Paul and Edwards, Reuben (2006) A Serendipitous Mobile Game. In: Proceedings GDTW 2006 The Fourth International Game Design and Technology Workshop and Conference :. Liverpool John Moores University, Liverpool, UK. ISBN 1-9025-6014-0
Clemson, Helen and Coulton, Paul and Edwards, Reuben and Chehimi, Fadi (2006) Mobslinger: The Fastest Mobile in the West. In: 1st World Conference for Fun 'n Games, 2006-06-26 - 2006-06-28, University of Central Lancashire.
Coulton, Paul and Clemson, Helen and Edwards, Reuben (2006) Mobslinger: Creating Urban Outlaws. In: 5th International Conference on Entertainment Computing, 2006-09-20 - 2006-09-22.
Coulton, Paul and Rashid, Omer and Bamford, William and Edwards, Reuben (2006) Running with the PAC. In: 1st World Conference for Fun 'n Games, 2006-06-26 - 2006-06-28, University of Central Lancashire.
D
Dawson, Richard (2006) The electrochemcial recovery of platinum and palladium from spent alumina supported catalysts. PhD thesis, University of London.
Degl'Innocenti, R. and Reidt, S. and Guarino, A. and Rezzonico, D. and Poberaj, G. and Günter, P. (2006) Micromachining of ridge optical waveguides on top of He+ -implanted Β-BaB2O4 crystals by femtosecond laser ablation. Journal of Applied Physics, 100 (11): 113121. ISSN 0021-8979
Degl'Innocenti, Riccardo and Guarino, A. and Poberaj, G. and Günter, P. (2006) Second harmonic generation of continuous wave ultraviolet light and production of β-BaB2O4 optical waveguides. Applied Physics Letters, 89 (4): 041103. ISSN 0003-6951
Dekoulis, G. and Honary, F. (2006) Novel intelligent sensor for reconfigurable space physics systems. Cyprus Journal of Science and Technology, 5 (2). pp. 32-50.
Denton, R. E. and Goldstein, J. and Lee, D.-H. and King, R. A. and Dent, Z. C. and Gallagher, D. L. and Berube, D. and Takahashi, K. and Nosé, M. and Milling, D. and Honary, F. (2006) Realistic magnetospheric density model for 29 August 2000. Journal of Atmospheric and Solar-Terrestrial Physics, 68 (6). pp. 615-628. ISSN 1364-6826
Dewar, Richard J. and Ash, Dean C. and German, Matthew J. and Joyce, Malcolm J. (2006) Practical considerations of the QCM as a viscometer within the food industry : performance deterioration with repeated use and surface roughness. Journal of Food Engineering, 75 (4). pp. 461-468. ISSN 0260-8774
Dewar, Richard J. and Joyce, Malcolm J. (2006) The rheology of maize and maltodextrin-based foodstuffs used in dysphagia therapy. Carbohydrate Polymers, 65 (3). pp. 296-305. ISSN 0144-8617
Di Carlo, Aldo and Pecchia, Alessandro and Petrolati, Eleonora and Paoloni, Claudio (2006) Modelling of carbon nanotube-based devices: from nanoFETs to THz emitters - art. no. 632808. In: Nanomodeling II :. SPIE-INT SOC OPTICAL ENGINEERING, San Diego, p. 32808. ISBN 0-8194-6407-4
Ding, L. and Bradshaw, A. and Taylor, C. James (2006) Design of discrete-time RIDE control system. In: Proceedings of the UKACC International Conference on Control :. UNSPECIFIED.
Dumas, Norbert and Richardson, Andrew (2006) Towards a health monitor for system in package with MEMS functionality. In: 12th IEEE international mixed signal workshop, 2006-01-21 - 2006-01-23.
E
Edwards, Reuben and Coulton, Paul (2006) Providing the skills required for innovative mobile game development using industry/academic partnerships. ITALICS, 5 (3). pp. 1-8. ISSN 1473-7507
Edwards, Reuben and Coulton, Paul (2006) The UK'S Game Industry. In: Embracing the Challenge,Exploiting the Opportunities : Building a World Class IT Profession in the Era of Global Sourcing. Report by the British Computer Society . British Computer Society, Swindon. ISBN 978-1-902505-75-6
El-zaroug, Omar and Forth, John and Ye, Jianqiao and Beeby, Andrew (2006) Flexural performance of concrete slabs reinforced with GFRP and subjected to different thermal histories. In: 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures :. University of Patras, Patras, Greece.
Esmaeilsabzali, Hadi and Montazeri, Allahyar and Poshtan, Javad and Jahed-Motlagh, M. R. (2006) Robust identification of a lightly damped flexible beam using set-membership and model error modeling techniques. In: Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006 IEEE International Symposium on Intelligent Control, 2006 IEEE :. IEEE International Conference on Control Applications . IEEE, DEU, pp. 1881-1885. ISBN 978-0-7803-9795-8
Exadaktylos, V. and Taylor, C. James and Chotai, Arun (2006) Non-minimal model predictive control with an integral-of-error state variable. In: Proceedings of the UKACC international conference on control. :. UNSPECIFIED.
G
Garner, Philip and Edwards, Reuben and Coulton, Paul (2006) Card-based Macro-payment for Mobile Phones. In: Mobile Business, 2006. ICMB '06. International Conference on :. IEEE, Copenhagen, Denmark. ISBN 978-0-7695-2595-2
Garner, Philip and Edwards, Reuben and Coulton, Paul (2006) XEPS - Enabling card-based payment for Mobile Terminals. In: Consumer Electronics, 2006. ISCE '06. 2006 IEEE Tenth International Symposium on :. IEEE, St.Petersburg , Russia. ISBN 1-4244-0216-6
Garner, Philip and Rashid, Omer and Coulton, Paul and Edwards, Reuben (2006) The mobile phone as a digital SprayCan. In: ACE '06 Proceedings of the 2006 ACM SIGCHI international conference on Advances in computer entertainment technology :. ACM, Hollywood, USA. ISBN 1-59593-380-8
Gilbertson, Paul and Edwards, Reuben and Coulton, Paul (2006) Converging computer and home entertainment devices in the consumer media network environment. In: Consumer Communications and Networking Conference, 2006. CCNC 2006. 3rd IEEE :. IEEE, Las Vegas, USA, pp. 1003-1007. ISBN 1-4244-0085-6
Gilbertson, Paul and Edwards, Reuben and Coulton, Paul (2006) Nodits: Position Triggered Information and Messages. In: Consumer Electronics, 2006. ISCE '06. 2006 IEEE Tenth International Symposium on :. IEEE, St.Petersburg , Russia. ISBN 1-4244-0216-6
Gilbertson, Paul and Edwards, Reuben and Coulton, Paul (2006) Reducing Processing Time for Real-Time Mobile Hosted Location Based Services. In: Personal, Indoor and Mobile Radio Communications, 2006 IEEE 17th International Symposium on :. IEEE, Helsinki, Finland. ISBN 1-4244-0329-4
Gong, K. and Darr, J.A. and Rehman, I.U. (2006) Supercritical fluid assisted impregnation of indomethacin into chitosan thermosets for controlled release applications. International Journal of Pharmaceutics, 315 (1-2). pp. 93-98. ISSN 0378-5173
Goudket, P. and Bellantoni, L. and Edwards, H. and Foley, M. and Khabiboulline, T. and Mitchell, D. and Rowe, N. and Solyak, N. and Burt, G. and Dexter, A. and Koeth, T. and Adolphsen, C. (2006) Status of 3.9 GHz defelecting mode (crab) cavity R&D. In: Proceedings of the LINAC 2006 conference. :. UNSPECIFIED.
Green, S.M. (2006) Deformation of materials. Current Orthopaedics, 20 (1). pp. 9-15. ISSN 0268-0890
Green, Sarah and Lee, S. and Joyce, T. and Unsworth, A. (2006) Design and development of a novel multistation MTP joint simulator for in vitro testing. In: Proceedings 20th European Society of Biomaterials Conference, 2006-08-27 - 2006-09-01.
Green, Sarah and Lee, S. and Joyce, T. and Unsworth, A. (2006) Wear performance of silastic prostheses tested on a novel metatarsophalangeal joint simulator. In: Bath Biomechanics Symposium 2006, 2006-09-18.
Green, Sarah and Mahomed, A. and Cloke, D. J. and Chuter, G. S. J. and Partington, P. F. (2006) Wear evaluation of retrieved, failed uncemented UHMWPE prostheses. In: Proceedings 20th European Society of Biomaterials Conference, 2006-08-27 - 2006-09-01.
Guarino, Andrea and Jazbinšek, Mojca and Herzog, Christian and Degl'Innocenti, Riccardo and Poberaj, Gorazd and Günter, Peter (2006) Optical waveguides in Sn2P2S6 by low fluence MeV He+ ion implantation. Optics Express, 14 (6). pp. 2344-2358. ISSN 1094-4087
Gurin, V. S. and Alexeenko, A. A. and Zolotovskaya, Svetlana and Yumashev, K. V. (2006) Copper and copper selenide nanoparticles in the sol-gel matrices : structural and optical. Materials Science and Engineering: C, 26 (5-7). pp. 952-955. ISSN 0928-4931
H
Haygarth, P. M. and Bilotta, G. S. and Bol, R. and Brazier, R.E. and Butler, P. J. and Freer, J. and Gimbert, L. J. and Granger, S. J. and Krueger, T. and Macleod, C. J. A. and Naden, P. and Old, G. and Quinton, J. N. and Smith, B. and Worsfold, P. (2006) Processes affecting transfer of sediment and colloids, with associated phosphorus, from intensively farmed grasslands : an overview of key issues. Hydrological Processes, 20 (20). pp. 4407-4413. ISSN 0885-6087
Heiser, T. and Adamopoulos, George and Brinkmann, M. and Giovanella, U. and Ould-Saad, S. and Brochon, C. and van de Wetering, K. I. and Hadziioannou, G. (2006) Nanostructure of self-assembled rod-coil block copolymer films for photovoltaic applications. Thin Solid Films, 511-51. pp. 219-223. ISSN 0040-6090
Hill, C. and Carter, Richard G. (2006) Investigation of possible multipactor discharge in a klystron input cavity. In: 2006 IEEE International Vacuum Electronics Conference held jointly with 2006 IEEE International Vacuum Electron Sources, 2006-04-25 - 2006-04-27.
Hu, B and Sewell, P and Vukovic, A and Paul, John D. and Benson, T (2006) General approach for Nth-order dispersive material. IEE Proceedings - Optoelectronics, 153 (1). pp. 13-20. ISSN 1350-2433
Huang, Mingxin and Díaz Del Castillo, Pedro E.J.Rivera and Li, Zhonghua (2006) Edge dislocation dipole emission from a blunt crack tip and its morphological effects. Scripta Materialia, 54 (4). pp. 649-653. ISSN 1359-6462
J
Jafri, A. and Green, S.M. and McCaskie, A.W. and Partington, P.F. and Muller, S.D. (2006) OPTIMAL PROSTHESIS TEMPERATURE IN CEMENTED TOTAL HIP ARTHROPLASTY. Journal of Bone and Joint Surgery, British Volume, 88-B (SUPP I). p. 365.
Jiang, Xi and Zhao, H and Cao, L (2006) Numerical simulations of the flow and sound fields of a heated axisymmetric pulsating jet. Computers and Mathematics with Applications, 51 (3-4). pp. 643-660. ISSN 0898-1221
Jiang, Xi and Zhao, H. and Luo, K. H. (2006) Direct simulations of a transitional unsteady impinging hot jet. In: Direct and Large-Eddy Simulation VI :. Springer, DORDRECHT, pp. 487-494. ISBN 1-4020-4909-9
Jones, R. M. and Bellantoni, L. and Burt, G. and Dexter, A. and Latina, A. and Schulte, D. (2006) Wake fields and beam dynamics simulations for the 3.9-ghz cavities of the ILC. In: 23rd International Linear Accelerator Conference, LINAC 2006, 2006-08-21 - 2006-08-25.
Joyce, Malcolm J. and Albadri, Abdulrahman and Benson, Chris and Price, Robert A. (2006) The empirical dependence of radiation-induced charge neutralization on negative bias in dosimeters based on the metal oxide-semiconductor field-effect transistor. Journal of Applied Physics, 100 (4). 044505. ISSN 1089-7550
Joyce, Malcolm J. and Dewar, Richard J. (2006) Time-dependent rheology of starch thickeners and the clinical implications for dysphagia therapy. Dysphagia, 21 (4). pp. 264-269. ISSN 0179-051X
Joyce, Malcolm J. and Nuttall, W. J. and Squire, C. and Kemp, Roger (2006) We need nuclear, but in today's world don't expect the new players to be British. Parliamentary Brief, 10 (10).
Joyce, T.J. and Monk, D. and Thompson, P. and Chiu, P. and Unsworth, A. and Green, S.M. (2006) ORTHOPAEDIC BIOPOLYMER WEAR SCREENING RIG VALIDATED AGAINST CLINICAL DATA. Journal of Bone and Joint Surgery, British Volume, 88-B (SUPP I). p. 377.
K
Kavanagh, A. J. and Honary, F. and Rietveld, M. T. and Senior, A. (2006) First observations of the artificial modulation of polar mesospheric winter echoes. Geophysical Research Letters, 33 (19). L19801. ISSN 0094-8276
Keiling, A. and Fujimoto, M. and Hasegawa, H. and Honary, F. and Sergeev, V. and Semenov, V. S. and Frey, H. U. and Amm, O. and Rème, H. and Dandouras, I. and Lucek, E. (2006) Association of Pi2 pulsations and pulsed reconnection: Ground and Cluster observations in the tail lobe at 16 RE. Annales Geophysicae, 24 (12). pp. 3433-3449. ISSN 0992-7689
Kellici, S. and Rehman, I. and Darr, J. (2006) Controlled growth of titania nanospheres in supercritical carbon dioxide using a novel surfactant stabilised precursor. Journal of Materials Chemistry, 16 (2). pp. 159-161. ISSN 0959-9428
Kemp, Roger (2006) Is the environment-friendly aircraft an oxymoron? In: Proceedings of the Royal Aeronautical Society conference. :. UNSPECIFIED.
Kemp, Roger (2006) Regulating Safety in a Disaggregated Private Sector: A Challenge for New Build. UNSPECIFIED.
Kemp, Roger (2006) Regulating incalculable risks : the link between risk measurement and risk regulation. In: Proceedings of the EPSRC network conference on risk perception and assessment in design. :. UNSPECIFIED.
Kemp, Roger (2006) Review of UK energy policy - transport. In: Proceedings of the IET Conference :. IET Press.
Koltsov, Denis (2006) Nanoeducation matters. Times (Nanotechnology Supplement).
Koltsov, Denis (2006) Nanometer magnets. In: McGraw-Hill yearbook of science and technology. :. McGraw-Hill, pp. 205-208.
Koltsov, Denis and Richardson, Andrew (2006) Initial background search on piezoelectric weight measurement used in urimeter application. Working Paper. UNSPECIFIED.
Koltsov, Denis and Sofield, C. and Harker, A. (2006) Stanelco plc : Eight technical reports (commercial in confidence). UNSPECIFIED. (Unpublished)
L
Lam, D. and Ye, J. Q. and Fu, F. (2006) Finite element modelung of semi-rigid composite joints with precast hollow core slabs. In: 8th International Conference on Steel-Concrete Composite and Hybrid Structures, Proceedings :. HARBIN INSTITUTE TECHNOLOGY PUBLISHERS, Harbin, pp. 426-433.
Lechner, A. and Georgopoulos, K. and Burbidge, M. and Richardson, A. (2006) Investigation into the use of hybrid solutions for high resolution A/D converter testing. Journal of Electronic Testing, 22 (4-6). pp. 359-370. ISSN 0923-8174
Li, Lin and Syed, W. U. H. and Pinkerton, A. J. (2006) Rapid additive manufacturing of functionally graded structures using simultaneous wire and powder laser deposition. Virtual and Physical Prototyping, 1 (4). pp. 217-225. ISSN 1745-2759
Lin, Hungyen and Fischer, Bernd M. and Mickan, S. P. and Abbott, Derek (2006) THz near-field microscopy : a review. In: Infrared Millimeter Waves and 14th International Conference on Teraherz Electronics, 2006. IRMMW-THz 2006. Joint 31st International Conference on :. IEEE, p. 441. ISBN 1424404002
Lin, Hungyen and Kong, L. X. and Hsu, Hung-Yao (2006) Modelling and predicting degradation trends using artificial neural networks. In: Proceedings of the 1st World Congress on Engineering Asset Management :. Springer-Verlag,, London, pp. 235-242. ISBN 1846285836
Lin, Hungyen and Lin, H. Y. and Kong, L. X. (2006) Finite element analysis of a polymer to polymer wearing process. In: Proceedings of the Fifth International Conference on Engineering Computational Technology :. Civil-Comp proceedings . Civil-Comp Press, pp. 456-463. ISBN 9781905088119
Liu, D. and Cao, D. and Tucker, R. W. (2006) Evolutionary systems for slender thermomechanical structures. Proceedings of workshop on global integrability of field theories applications. pp. 347-368.
Liu, H. and Dumas, N. and Richardson, A. and Heal, R. and Kerkhoff, H. G. (2006) Built-in test of electrode degradation of multi-electrode array biosensors. In: Proceedings of the 12th IEEE International mixed signal testing workshop (IMSTW'06), Edinburgh, United Kingdom :. ISLI en Lancaster University, Lancaster, UK, pp. 136-141.
Liu, Hongyuan and Strusevich, N. and Stoyanov, S. and Bailey, C. and Richardson, Andrew M. D. and Dumas, N. and Yannou, J. M. and Georgel, V. (2006) Modelling the behaviour of soldier joints for wafer level SIP. In: Proceedings of the 8th IEEE electronics packaging technology conference. :. UNSPECIFIED.
M
Ma, X and Peyton, A. J. and Zhao, Y. Y (2006) Eddy current measurements of electrical conductivity and magnetic permeability of porous metals. NDT and E International, 39 (7). 562 -568.
Ma, X. and Peyton, A. J. and Higson, S. R. and Lyons, A. and Dickinson, S. J. (2006) Hardware and software design for an electromagnetic induction tomography (EMT) system for high contrast metal process applications. Measurement Science and Technology, 17 (1). pp. 111-118. ISSN 0957-0233
Ma, Xiandong and Peyton, A. J. (2006) Eddy current measurement of the electrical conductivity and porosity of metal foams. IEEE Transactions on Instrumentation and Measurement, 55 (2). pp. 570-576. ISSN 0018-9456
Makarevich, R. A. and Honary, F. and Howells, V. S. C. and Koustov, A. V. and Milan, S. E. and Davies, J. A. and Senior, A. and McCrea, I. W. and Dyson, P. L. (2006) A first comparison of irregularity and ion drift velocity measurements in the E-region. Annales Geophysicae, 24 (9). pp. 2375-2389. ISSN 0992-7689
Makarevich, R. A. and Senior, A. and Koustov, A. V. and Uspensky, M. and Honary, F. and Dyson, P. L. (2006) A study of aspect angle effects in the E-region irregularity velocity using multi-point electric field measurements. Geophysical Research Letters, 33 (21). L21102. ISSN 0094-8276
McCabe, A. P. and Aggidis, George A. and Stallard, T. J. (2006) A time-varying parameter model of a body oscillating in pitch. Applied Ocean Research, 28 (6). pp. 359-370.
McCabe, Andrew P. and Aggidis, George A. and Stallard, T. J. (2006) Comparable performance characteristics from different test sites. In: Proceedings of the 4th EC co-ordination action on ocean energy workshop - performance monitoring of ocean energy systems (INETI). :. UNSPECIFIED.
McCabe, Andy P. and Yavuz, H. and Bradshaw, A. and Stallard, T. J. and Aggidis, George (2006) Power optimisation for a heaving 1-DOF surging WEC in regular seas with dynamically changing wave frequency. In: Proceedings of the SUPERGEN marine energy research consortium : work package 9 : wave power control. :. UNSPECIFIED.
McCabe, Andy P. and Yavuz, H. and Bradshaw, A. and Taylor, C. James and Aggidis, George A. (2006) Power optimisation for a 1-DOF surging WEC in regular seas with dynamically changing wave frequency. In: Proceedings of the SUPERGEN marine energy research consortium : work package 9 : wave power control. :. UNSPECIFIED.
McCabe, Andy P. and Yavuz, H. and Stallard, T. J. and Aggidis, George (2006) Power optimisation study for a 2 DOF pitching and surging wave energy converter in regular seas. In: Proceedings of the SUPERGEN marine energy research consortium : work package 9 : wave power control. :. UNSPECIFIED.
McCabe, Andy P. and Yavuz, H. and Stallard, T. J. and Bradshaw, A. and Aggidis, George (2006) Functional decomposition analysis of a WEC control system. In: Proceedings of the SUPERGEN marine energy research consortium : work package 9 : wave power control. :. UNSPECIFIED.
Meadowcroft, J. A. and Stallard, T. J. and Baker, N. J. and Aggidis, George A. (2006) Absorption of energy from irregular waves by a buoyant, surging body. In: Proceedings of the 16th international offshore and polar engineering conference (ISOPE). :. UNSPECIFIED.
Montazeri, Allahyar and Esmaeilsabzali, Hadi and Poshtan, Javad (2006) Comparison of deterministic and stochastic methods for robust Identification of a lightly damped flexible beam. In: 13th International Congress on Sound and Vibration 2006, ICSV 2006 :. UNSPECIFIED, AUT, pp. 2764-2773. ISBN 9781627481502
Montazeri, Allahyar and Esmaeilsabzali, Hadi and Poshtan, Javad and Jahed Motlagh, Mohammad Reza (2006) Comparison of different approaches for robust identification of a lightly damped flexible beam. In: 2006 14th European Signal Processing Conference :. European Signal Processing Conference . IEEE, ITA, pp. 1-5.
Mutlu, Ural Mutlu and Edwards, Reuben and Coulton, Paul (2006) QOS Aware CORBA Middleware for Bluetooth. In: Consumer Electronics, 2006. ISCE '06. 2006 IEEE Tenth International Symposium on :. IEEE, St.Petersburg , Russia. ISBN 1-4244-0216-6
Mutlu, Ural Mutlu and Edwards, Reuben and Coulton, Paul (2006) QoS Aware Bluetooth Middleware. In: Information and Communication Technologies, 2006. ICTTA '06. 2nd :. IEEE, Damascus, Syria. ISBN 0-7803-9521-2
N
Nadal, Martí and Wargent, Jason J. and Jones, Kevin C. and Paul, Nigel D. and Schuhmacher, Marta and Domingo, José L. (2006) Influence of UV-B radiation and temperature on photodegradation of PAHs : preliminary results. Journal of Atmospheric Chemistry, 55 (3). pp. 241-252. ISSN 0167-7764
Najdanovic-Visak, Vesna and Rodriguez, Ana and Visak, Zoran P. and Rosa, Joao N. and Afonso, Carlos A. M. and Da Ponte, Manuel Nunes and Rebelo, Luis Paulo N. (2006) Liquid-Liquid behaviour of functionalized ionic liquids plus 2-Propanol plus Dickloromethane. Chimica Oggi, 24 (6). pp. 19-20. ISSN 0392-839X
Norton, J. and Malik, K.R. and Darr, J.A. and Rehman, I.U. (2006) Recent developments in processing and surface modification of hydroxyapatite. Advances in Applied Ceramics, 105 (3). pp. 113-139. ISSN 1743-6753
Nosé, M. and Iyemori, T. and Takeda, M. and Kamei, T. and Honary, F. and Marple, S. R. and Matzka, J. and Ookawa, T. and Takahashi, K. and Cifuentes-Nava, G. (2006) Automated detection of Pi2 pulsations to monitor substorm signatures: Its application to real-time data and archived data. In: Proceedings of the Eighth International Conference on Substorms (ICS8), 1900-01-01.
P
Pamunuwa, Dinesh and Weerasekera, Roshan (2006) Nanodevices : from novelty toys to functional devices - an integration perspective. In: Proceedings of the IEEE international conference on industrial and information systems. :. UNSPECIFIED, 103 -108. ISBN 1-4244-0322-7
Paoloni, C (2006) Analysis of dielectric rods with arbitrary shape for low-dispersion slow-wave structures in helix TWTs. IEEE Transactions on Electron Devices, 53 (6). pp. 1490-1493. ISSN 0018-9383
Partap, S. and Rehman, I. and Jones, J.R. and Darr, J.A. (2006) "Supercritical carbon dioxide in water" emulsion-templated synthesis of porous calcium alginate hydrogels. Advanced Materials, 18 (4). pp. 501-504. ISSN 0935-9648
Patil, Sunit and Mahon, Andrew and Green, Sarah and McMurtry, Ian and Port, Andrew (2006) A biomechanical study comparing a raft of 3.5 mm cortical screws with 6.5 mm cancellous screws in depressed tibial plateau fractures. Knee, 13 (3). pp. 231-235. ISSN 0968-0160
Petrolati, Eleonora and Paoloni, Claudio and Di Carlo, Aldo (2006) Simulation of a THz vacuum triode using carbon-nanotube emitter. In: 2006 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE HELD JOINTLY WITH 2006 IEEE INTERNATIONAL VACUUM ELECTRON SOURCES :. IEEE, Monterey, pp. 197-198. ISBN 1-4244-0108-9
Pinkerton, A J and Syed, W U H and Li, L (2006) An experimental and theoretical investigation of combined gas- and water-atomized powder deposition with a diode laser. Journal of Laser Applications, 18 (1). pp. 73-80. ISSN 1042-346X
Pinkerton, A J and Syed, W. U. H. and Li, L. (2006) An analytical model of the combined powder-wire deposition process. In: Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO) :. Laser Institute of America.
Pinkerton, A.J. and Moat, R. J. and Li, L. and Preuss, M. and Withers, P. (2006) Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology. In: Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO) :. Laser Institute of America.
Pinkerton, Andrew J. and Karadge, Mallikarjun and Syed, Waheed Ul Haq and Li, Lin (2006) Thermal and microstructural aspects of the laser direct metal deposition of waspaloy. Journal of Laser Applications, 18 (3). pp. 216-226. ISSN 1042-346X
Pinto, Domenico and Obayya, Salah (2006) Complex envelope alternating direction implicit finite difference time domain method for photonic bandgap structures. In: Semiconductor and Integrated Optoelectronics conference, SIOE’06, 2006-04-07.
Pinto, Domenico and Obayya, Salah (2006) Time-domain modelling of nonlinear optical waveguides. In: International Workshop on Optical Waveguide Theory and Numerical Modelling, OWTNM’06, 2006-04-21.
Pinto, Domenico and Obayya, Salah and Rahman, B and Grattan, K (2006) FDTD analysis of nonlinear bragg grating based devices. Optical and Quantum Electronics, 38 (15). pp. 1217-1235. ISSN 1572-817X
Q
Quayle, Stephen D. and Aggidis, George A. (2006) Preliminary investigation of multi-element profiles for a high-life variable pitch vertical-axis tidal stream device. IMechE Conference Transactions, v. 10.
R
Rashid, Omer and Bamford, Will and Coulton, Paul and Edwards, Reuben and Scheible, Jurgen (2006) PAC-LAN: Mixed reality gaming with RFID enabled mobile phones. Computers in Entertainment (CIE), 4 (4). pp. 1-17. ISSN 1544-3574
Rashid, Omer and Bamford, William and Coulton, Paul and Edwards, Reuben (2006) PAC-LAN: the human arcade. In: ACE '06 Proceedings of the 2006 ACM SIGCHI international conference on Advances in computer entertainment technology :. ACM, Hollywood, USA. ISBN 1-59593-380-8
Rashid, Omer and Coulton, Paul and Edwards, Reuben (2006) Implications of IMS and SIP on the Evolution of Mobile Applications. In: Consumer Electronics, 2006. ISCE '06. 2006 IEEE Tenth International Symposium on :. IEEE, St.Petersburg , Russia. ISBN 1-4244-0216-6
Rashid, Omer and Coulton, Paul and Edwards, Reuben and Bamford, William (2006) Utilising RFID for mixed reality mobile games. In: Consumer Electronics, 2006. ICCE '06. 2006 Digest of Technical Papers. International Conference on :. IEEE, Las Vegas, USA, pp. 459-460. ISBN 0-7803-9459-3
Rashid, Omer and Mullins, Ian and Coulton, Paul and Edwards, Reuben (2006) Extending Cyberspace:Location Based Games Using Cellular Phones. Computers in Entertainment (CIE), 4 (1). pp. 1-18. ISSN 1544-3574
Rennie, Allan (2006) Virtual Prototyping Phase II. [Report]
Rennie, Allan E. W. (2006) Lancaster Virtual Prototyping Project : (GONW5167/8EUR – M4-07-LANC). In: Proceedings of the 4th EU Best Practice Conference : New Horizons in Graz. UNSPECIFIED.
Richardson, A. and Slattery, O. and Rencz, M. (2006) Design for Micro and Nano Manufacture; The "PATENT-DfMM Network of Excellence: Modelling and Simulation Cluster. In: Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2006. EuroSime 2006. 7th International Conference on :. UNSPECIFIED, 1 -5.
Richardson, Andrew and Pickering, Chris and McNie, Mark and Reeves, Chris and Schropfer, Gerold and Knapp, Helmut and Bosshard, Christian (2006) Bringing Multi-Domain Functions to Intelligent Systems through MEMS Technology Platforms – The INTEGRAMplus Access Service. MST News (VDI/VDE Technologiezentrum Informationstechnic) (4). pp. 38-40. ISSN 0948-3128
Richardson, Andrew M. D. and Ferraris, Eleonora and Fassi, Irene and De Masi, Biagio and Rosing, Richard (2006) A capacitance and optical method for the static and dynamic characterization of micro electro mechanical systems (MEMS) devices. Microsystem Technologies, 12 (10-11). pp. 1053-1061. ISSN 0946-7076
Richardson, Andrew M. D. and Mir, S. and Cheng, T. (2006) Guest editorial. Journal of Electronic Testing, 22 (4-6). p. 311. ISSN 0923-8174
Richardson, Andrew M. D. and Pickering, C. and McNie, M. and Reeves, C. L. (2006) INTEGRAMplus : a new European service project providing development platforms for integrated micro-nano technologies and products. MST News (VDI/VDE Technologiezentrum Informationstechnic). ISSN 0948-3128
Richardson, Andrew M. D. and Solomon, P. and El-Fatatry, A. (2006) MNT needs methodologies and software tools. MST News (VDI/VDE Technologiezentrum Informationstechnic), 2. pp. 16-35. ISSN 0948-3128
Ritchie, Samuel E. and Honary, F. (2006) Prediction of sudden commencement absorption. In: Loughborough Antennas and Propagation Conference, 2006-04-11 - 2006-04-12.
S
Sabzali, Hadi Esmaeil and Montazeri, Allahyar and Poshtan, Javad and Jahed Motlagh, M. R. (2006) SET membership identification of a lightl damped flexible beam for robust control. In: 13th International Congress on Sound and Vibration 2006, ICSV 2006 :. 13th International Congress on Sound and Vibration 2006, ICSV 2006 . UNSPECIFIED, AUT, pp. 3532-3539. ISBN 9781627481502
Selcuk, C. and Kennedy, A. R. (2006) Al-TiC composite made by the addition of master alloys pellets synthesised from reacted elemental powders. Materials Letters, 60 (28). pp. 3364-3366. ISSN 0167-577X
Seward, Derek and Agate, R. Y. and Bakari, Mohamed and Pace, C. M. (2006) Control architecture characteristics for intelligence in autonomous mobile construction robots. In: Proceedings of the 24th international symposium on automation and robotics in construction. :. UNSPECIFIED, pp. 846-851.
Seward, Derek and Agate, R. Y. and Pace, C. M. (2006) Emotions modelling for safe behaviour generation in robotic systems. In: Proceeding of the European safety and reliability conference (ESREL 2006). :. UNSPECIFIED, pp. 93-99.
Seward, Derek W. and Pace, C. M. and Agate, Rahee Y. (2006) Implementation issues for safe behaviour in robotic systems. In: Proceeding of the European safety and reliability conference (ESREL 2006). :. UNSPECIFIED.
Sezer, H. K. and Li, L. and Schmidt, M. and Pinkerton, A. J. and Anderson, B. and Williams, P. (2006) Effect of beam angle on HAZ, recast and oxide layer characteristics in laser drilling of TBC nickel superalloys. International Journal of Machine Tools and Manufacture, 46 (15). pp. 1972-1982. ISSN 0890-6955
Simm, William and Roberts, Peter E. and Joyce, Malcolm J. (2006) Dysarthic speech measures for use in evidence-based speech therapy. In: Proceedings of the 3rd Cambridge workshop on universal access and assistive technology. :. Springer, London, pp. 155-164.
Skeldon, K. D. and McMillan, L. C. and Wyse, C. A. and Monk, S. D. and Gibson, G. and Patterson, C. and France, T. and Longbottom, C. and Padgett, M. J. (2006) Application of laser spectroscopy for measurement of exhaled ethane in patients with lung cancer. Respiratory Medicine, 100 (2). pp. 300-306. ISSN 1532-3064
Soleimani, M. and Lionheart, W. R. B. and Peyton, A. J. and Ma, Xiandong and Higson, S. R. (2006) A three-dimensional inverse finite-element method applied to experimental eddy-current imaging data. IEEE Transactions on Magnetics, 42 (5). 1560 -1567. ISSN 0018-9464
Stables, M. A. and Taylor, C. James (2006) Nonlinear control of ventilation rate using state dependent parameter models. Biosystems Engineering, 95 (1). pp. 7-18. ISSN 1537-5110
Stables, M. A. and Taylor, C. James and Chotai, Arun (2006) Control of micro-climate using time delay state dependent parameter models. In: Proceedings of the 18th international conference on systems engineering (ICSE-06). :. UNSPECIFIED.
Sterno, N. and Greeves, G. and Tullis, S. and Jiang, Xi and Zhao, Hua (2006) Simulation of the air/fuel mixing of an HSDI diesel engine : part 1: a new dense spray vapour coupling submodel. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 220 (D12). pp. 1793-1805. ISSN 0954-4070
Syed, W. U. H. and Pinkerton, A. J. and Li, L. (2006) Simultaneous wire- and powder-feed direct metal deposition: An investigation of the process characteristics and comparison with single-feed methods. Journal of Laser Applications, 18 (1). pp. 65-72. ISSN 1042-346X
Syed, Waheed Ul Haq and Pinkerton, Andrew J. and Li, L. (2006) Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping. Applied Surface Science, 252 (13). pp. 4803-4808. ISSN 0169-4332
T
Tahir, I. and Dexter, A. and Carter, Richard G. (2006) Frequency and phase modulation performance of an injection-locked CW magnetron. IEEE Transactions on Electron Devices, 53 (7). pp. 1721-1729. ISSN 0018-9383
Tahir, I. and Dexter, A. C. and Carter, Richard G. (2006) Use of DSP and fast feedback for accurate phase control of an injection locked magnetron. In: 2006 IEEE International Vacuum Electronics Conference held jointly with 2006 IEEE International Vacuum Electron Sources, 2006-04-25 - 2006-04-27.
Taylor, C. James and Shaban, E. (2006) Multivariable proportional-integral-plus (PIP) control of the ALSTOM nonlinear gasifier simulation. IEE Proceedings - Control Theory and Applications, 153 (3). pp. 277-285. ISSN 1350-2379
Taylor, C. James and Shaban, E. M. and Chotai, Arun and Ako, S. (2006) Development of an automated verticality alignment system for a vibro-lance. In: Proceedings of the 7th Portuguese conference on automatic control (Controlo-07) :. UNSPECIFIED.
Taylor, C. James and Shaban, E. M. and Chotai, Arun and Ako, S. (2006) Nonlinear control system design for construction robots using state dependent parameter models. In: Proceedings of the UKACC international conference on control. :. UNSPECIFIED.
Taylor, C. James and Sidiropoulou, Eleni and Shaban, E. M. and Tych, Wlodek and Chotai, Arun (2006) Linear, nonlinear and classical control of a 1/5th scale automated excavator. In: Proceedings of the 18th international conference on systems engineering (ICSE-06). :. UNSPECIFIED.
Turvey, Geoffrey (2006) Failure of pultruded GRP WF-section webs in compression - an experimental investigation. In: Proceedings of the 12th European conference on composite materials (ECCM-12) :. UNSPECIFIED.
Turvey, Geoffrey (2006) Structural analysis of CFRP-plated pultruded GRP beams. Proceedings of the ICE - Structures and Buildings, 159 (SB2). pp. 65-75. ISSN 1751-7702
Turvey, Geoffrey and Wang, P. (2006) An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design. In: Proceedings of the 6th international conference on computational mechanics (ECCM 2006) :. UNSPECIFIED.
Turvey, Geoffrey and Wang, P. (2006) Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency. In: Proceedings of the 2nd international conference on joining plastics 2006. :. UNSPECIFIED.
Turvey, Geoffrey and Zhang, Y. (2006) Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests. Composites Part A: Applied Science and Manufacturing, 37 (2). pp. 152-164. ISSN 1359-835X
Turvey, Geoffrey and Zhang, Y. (2006) A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns. Computers and Structures, 84 (22-23). pp. 1527-1537.
Török, Z. and Platt, S. P. (2006) Application of imaging systems to characterization of single-event effects in high-energy neutron environments. IEEE Transactions on Nuclear Science, 53 (6). pp. 3718-3725. ISSN 0018-9499
W
Wan Hussin, Wan and Edwards, Reuben and Coulton, Paul (2006) EPass Using DRM in Symbian v8 OS and TrustZone : Securing Vital Data on Mobile Devices. In: Mobile Business, 2006. ICMB '06. International Conference on :. IEEE, Copenhagen, Denmark. ISBN 978-0-7695-2595-2
Wargent, Jason J. and Taylor, A. and Paul, Nigel D. (2006) UV supplementation for growth regulation and disease control. Acta Horticulturae, 711. pp. 333-338. ISSN 0567-7572
Weerasekera, Roshan and Pamunuwa, Dinesh B. and Zheng, Li-Rong and Tenhunen, Hannu (2006) Minimal-power, delay-balanced smart repeaters for interconnects in the nanometer regime. In: Proc. International Workshop on System-level Interconnect Prediction (SLIP) :. ACM, Munich, pp. 113-120. ISBN 1-59593-255-0
X
Xie, Xiaodong D. and Wang, Yibing B. and Williamson, Lisa and Holroyd, Geoff H. and Tagliavia, Cecilia and Murchie, Erik and Theobald, Julian C. and Knight, Marc R. and Davies, William J. and Leyser, H. M. Ottoline and Hetherington, Alistair M. (2006) The identification of genes involved in the stomatal response to reduced atmospheric relative humidity. Current Biology, 16 (9). pp. 882-887. ISSN 0960-9822
Z
Zhang, Daxu and Ye, Jianqiao and Lam, Dennis (2006) Ply cracking and stiffness degradation in cross-ply laminates under biaxial extension, bending and thermal loading. Composite Structures, 75 (1-4). pp. 121-131. ISSN 0263-8223
Zhang, Daxu and Ye, Jianqiao and Sheng, Hong Yu (2006) Free-edge and ply cracking effect in cross-ply laminated composites under uniform extension and thermal loading. Composite Structures, 76 (4). pp. 314-325. ISSN 0263-8223
Zolotovskaya, Svetlana and Savitski, V.G. and Gaponenko, M. S. and Malyarevich, A. M. and Yumashev, K. V. and Demchuk, M. I. and Raaben, H. and Zhilin, A. A. and Nejezchleb, K. (2006) Nd:KGd(WO4)2 laser at 1.35 μm passively Q-switched with V3+:YAG crystal and PbS-doped glass. Optical Materials, 28 (8-9). pp. 919-924. ISSN 0925-3467
Zolotovskaya, Svetlana and Savitski, V.G. and Prokoshin, P. V. and Yumashev, K. V. and Gurin, V. S. and Alexeenko, A. A. (2006) Nonlinear optical properties and Q-switch performance of silica glasses doped with CuxSe nanoparticles. Journal of the Optical Society of America B, 23 (7). pp. 1268-1275. ISSN 0740-3224