Items where Department is "Faculty of Science and Technology > Engineering" and Year is 2013
Number of items: 63.
Abujnah, Nabeil A. and Letizia, Rosa and Hameed, Mohamed Farhat O. and Abdelrazzak, Maher and Obayya, Salah (2013) Slotted microcavity ring resonators for optical storage applications. Optical and Quantum Electronics. ISSN 0306-8919
Bouamrane, Faycal and Di Carlo, Aldo and Durand, Alain J. and Kotiranta, Mikko and Krozer, Viktor and Zhurbenko, Vitaliy and Mineo, Mauro and Paoloni, Claudio (2013) LIGA-based Slow Wave Structure for a THz Vacuum Amplifier. In: 10th International Workshop on High Aspect Ratio Micro and Nano System Technology (HARMNST), 2013-04-212013-04-24, Berlin.
Cao, Dongpu (2013) Dynamics and control of road vehicles with a tyre failure. In: Vehicle Dynamics and Control 2013, 2013-04-162013-04-16, Cambridge.
Cao, Dongpu and Khajepour, Amir (2013) Novel Semi-Active Pitch-Plane Interconnected Suspension. Vehicle system dynamics. ISSN 0042-3114 (In Press)
Celik, Kursat and Lupeanu, Mihaela and Rennie, Allan and Neagu, Corneliu and Akinci, Ibrahim (2013) Product Re-Design using Advanced Engineering Applications and Function Analysis: A Case Study for Greenhouse Clips. Journal of the Brazilian Society of Mechanical Sciences and Engineering. ISSN 1678-5878
Cross, Philip and Ma, Xiandong (2013) Condition monitoring for sustainable energy generation of wind turbines. In: The 5th International Conference on Applied Energy (ICAE 2013),, 2013-07-012013-07-04, Pretoria. (In Press)
Cross, Philip and Ma, Xiandong (2013) Feature selection for artificial neural network model-based condition monitoring of wind turbines. In: BINDT. UNSPECIFIED. (In Press)
Cross, Philip and Ma, Xiandong (2013) State dependent parameter model-based condition monitoring for wind turbines. In: BINDT. UNSPECIFIED. (In Press)
Da Ronch, Andrea and McCracken, Andrew and Badcock, Ken and Widhalm, Markus and Campobasso, Sergio (2013) Linear Frequency Domain and Harmonic Balance Predictions of Dynamic Derivatives. Journal of Aircraft. ISSN 0021-8669
Dickinson, James W. and Bromley, Michael and Andrieux, Fabrice P. L. and Boxall, Colin (2013) Fabrication and Characterisation of the Graphene Ring Micro Electrode (GRiME) with an Integrated, Concentric Ag/AgCl Reference Electrode. IEEE Sensors Journal, 13 (3). pp. 3635-3651. ISSN 1424-8220
E. Zakrzewska, Małgorzata and B. Paninho, Ana and F. Môlho, Marta and V. M. Nunes, Ana and A. M. Afonso, Carlos and A. Rosatella, Andreia and M. Lopes, Joana and Najdanovic-Visak, Vesna (2013) Solubility and phase behaviour of binary systems containing salts based on transitional metals. Journal of chemical thermodynamics, 63. pp. 123-126. ISSN 0021-9614
EL-Zaroug, Omar and Forth, John and Ye, Jianqiao (2013) Prediction of Thermal Cracking in Concrete Structures reinforced with GFRP. In: FRPRCS-11: 11th International Symposiumn on Fibre Reinforced Polymer for Reinforced Concrete Structures. Elsevier. (In Press)
Edgecock, T.R. and Burt, Graeme and Dexter, Amos (2013) High intensity neutrino oscillation facilities in Europe. Physical Review Special Topics: Accelerators and Beams, 16 (2). ISSN 1098-4402
Eshiet, Kenneth and Sheng, Yong and Ye, Jianqiao (2013) Microscopic modelling of the hydraulic fracturing process. Environmental Earth Sciences, 68 (4). pp. 1169-1186.
Gamage, Kelum and Joyce, Malcolm and Taylor, Graeme (2013) Investigation of three-dimensional localisation of radioactive sources using a fast organic liquid scintillator detector. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 707. pp. 123-126.
Jackson, Sarah and Monk, Stephen and Lennox, Katherine (2013) Testing of a scintillator and fibre optic based radiation sensor. Radiation Measurements. ISSN 1350-4487 (In Press)
Jamaluddin, N. and Lam, Dennis and Dai, X. and Ye, Jianqiao (2013) An experimental study on elliptical concrete filled columns under axial compression. Journal of constructional steel research, 87. pp. 6-16. ISSN 0143-974X
Jesson, Peter and Cao, Dongpu (2013) Power consumption analysis of a flexible-wheel suspension planetary rover operating upon deformable terrain. In: SAE 2013 Commercial Vehicle Engineering Congress, 2013-10-012013-10-03, Chicago. (In Press)
Jiang, Xi and Akber Hassan, Wasim Akram and Gluyas, Jon (2013) Modelling and monitoring of geological carbon storage:a perspective on cross-validation. Applied Energy. ISSN 0306-2619
Khan, A. and Mir, Niyaz. A. and Haque, M. M. and Muneer, M. and Boxall, C. (2013) Solar Photocatalytic Decolorization of Two Azo Dye Derivatives, Acid Red 17 and Reactive Red 241 in Aqueous Suspension. Science of advanced materials, 5 (2). pp. 160-165. ISSN 1947-2935
Lambert, Christopher and Rennie, Allan and Ma, Xiandong (2013) A Design Academy: Increasing the Commercial Exposure of Engineering Students. In: Proceedings of The 9th International CDIO Conference: Engineering Leadership in Innovation and Design. UNSPECIFIED. (Submitted)
Letizia, Rosa and Paoloni, Claudio and Mineo, Mauro and Pinto, Domenico (2013) Photonic Crystals Assisted Slow Wave Structure for THz Vacuum Devices. In: 14th IEEE International Vacuum Electronic Conference. UNSPECIFIED.
Lupa, Chris and Lorkin, Matthew and Robinson, Lyndsey and Dinesh, K. K. J. Ranga and Sweetman, Andrew and Monk, Stephen and Herbert, Ben (2013) Small-scale anaerobic digestion for the treatment of organic waste: A national study. Energy for Sustainable development. ISSN 0973-0826 (In Press)
Lupeanu, Mihaela and Brooks, Hadley and Rennie, Allan and Hill, Dave (2013) Research on deploying technical functional analysis for additive manufacturing of a surgical device for intravitreal interventions. Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică, 75 (1). pp. 141-160. ISSN 1454-2358
Ma, Xiandong and Cross, Philip (2013) A novel condition monitoring and real-time simulation system for wind turbines. In: Proceedings of EWEA 2013 - European Wind Energy Conference & Exhibition. EWEA, Vienna.
Ma, Xiandong and Wang, Yifei and Qin, Jianrong (2013) Generic model of a community-based microgrid integrating wind turbines, photovoltaics and CHP generations. Applied Energy. ISSN 0306-2619 (In Press)
McCabe, Andrew (2013) Constrained optimization of the shape of a wave energy collector by genetic algorithm. Renewable Energy, 51 (n/a). pp. 274-284. ISSN 0960-1481
Mineo, Mauro and Paoloni, Claudio (2013) Improvement of cold parameters of the double corrugated waveguide by geometrical shaping of the corrugations. In: 14th IEEE International Vacuum Electronics Conference. UNSPECIFIED.
Ming, Dexiang and Zhong, Xiaopeng and Ma, Xiandong and Liu, Lili (2013) Design of a reconfigurable platform for navigation signal simulation. In: Springer. UNSPECIFIED. (In Press)
Mira Martinez, Daniel and Jiang, Xi (2013) Large-eddy simulations of unsteady hydrogen annular flames. Computers & Fluids, 80. 429–440. ISSN 0045-7930
Mira Martinez, Daniel and Jiang, Xi (2013) Numerical investigations of a hydrogen impinging flame with different finite-rate chemical kinetic mechanisms. Fuel, 109. pp. 285-296.
Mira Martinez, Daniel and Jiang, Xi and Moulinec, C. and Emerson, D.R. (2013) Numerical investigation of the effects of fuel variability on the dynamics of syngas impinging jet flames. Fuel, 103. 646–662.
Mira Martinez, Daniel and Jiang, Xi and Moulinec, C. and Emerson, D.R. (2013) Numerical simulations of turbulent non-premixed jet flames of hydrogen-enriched fuels. Computers & Fluids. ISSN 0045-7930
Monk, Stephen and Kalliokoski, Matti and Shippen, Alan and Peck, Christian and Colling, Bethany and Joyce, Malcolm (2013) A comparison of the MCNPX code with FLUKA and GEANT4:characterisation of the TRIUMF neutron facility. Radiation Protection Dosimetry. (In Press)
Narendra, Kumar and Limiti, Ernesto and Paoloni, Claudio (2013) Dual Fed Distributed Amplifier With Controlled Termination Adjustment. Progress In Electromagnetics Research, 139. pp. 761-777. ISSN 1070-4698
Neagu, Corneliu and Lupeanu, Mihaela and Rennie, Allan (2013) A new design concept for milling tools of spherical surfaces obtained by kinematic generation. Applied mathematical modelling, 37 (9). pp. 6119-6134. ISSN 0307-904X
Pakowski, Antoni and Cao, Dongpu (2013) Effect of ground deformability on suspension tuning and ride dynamics of off-road vehicles. In: SAE 2013 Commercial Vehicle Engineering Congress, 2013-10-012013-10-03, Chicago. (In Press)
Paoloni, Claudio (2013) New Klystron Topology Based on Periodic Sequence of High Order Mode Cavities. In: 2013 14th IEEE International Vacuum Electronic Conference Proceedings. UNSPECIFIED.
Paoloni, Claudio and Di Carlo, Aldo and Bouamrane, Faycal and Bouvet, Thomas and Durand, Alain J. and Kotiranta, Mikko and Krozer, Viktor and Megtert, Stephan and Mineo, Mauro and Zhurbenko, Vitaliy (2013) Design and realization aspects of 1-THz cascade backward wave amplifier based on double corrugated waveguide. IEEE Transactions on Electron Devices, 60 (3). pp. 1236-1243. ISSN 0018-9383
Paoloni, Claudio and Mineo, Mauro and Yin, Huabi and Zhang, Liang and He, Wenlong and Robertson, Craig W. and Ronald, Kevin and Phelps, Alan D.R. and Cross, Adrian W. (2013) Scaled Design and Test of a Coupler for Micro-Reentrant Square-Cavities for Millimeter Wave Klystrons. In: 14th IEEE International Vacuum Electronic Conference. UNSPECIFIED.
Parker, Andrew James and Boxall, Colin and Joyce, Malcolm (2013) A method for the replacement of 137Cs with 40K as a non-hazardous radioactive tracer for open-source decommissioning research applications. Journal of Radioanalytical and Nuclear Chemistry, Articles. ISSN 0236-5731
Pattanasattayavong, Pichaya and Thomas, Stuart and Adamopoulos, George and McLachlan, Martyn A. and Anthopoulos, Thomas D. (2013) p-channel thin-film transistors based on spray-coated Cu2O films. Applied Physics Letters, 102 (16). ISSN 0003-6951
Pazooki, A. and Rakheja, S. and Cao, Dongpu (2013) A three-dimensional model of an articulated frame-steer vehicle for coupled ride and handling dynamic analyses. Int. J. of Vehicle Performance. ISSN 1745-3194 (In Press)
Pazooki, Alireza and Rakheja, S. and Cao, Dongpu (2013) Effect of terrain roughness on the roll and yaw directional stability of an articulated frame steer vehicle. In: SAE 2013 Commercial Vehicle Engineering Congress, 2013-10-012013-10-03, Chicago. (In Press)
Pazooki, Alireza and Rakheja, Subhash and Cao, Dongpu (2013) Kineto-Dynamic Directional Response Analysis of an Articulated Frame Steer Vehicle. International journal of vehicle design. ISSN 0143-3369 (In Press)
Pinkerton, Andrew and Mahmood, Khalid (2013) Direct laser deposition with different types of 316L steel particle - a comparative study of final part properties. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. (In Press)
Ranga Dinesh, K.K.J. and Jiang, Xi and Malalasekera, W. and Odedra, A. (2013) Large eddy simulation of fuel variability and flame dynamics of hydrogen-enriched nonpremixed flames. Fuel Processing Technology, 107. pp. 2-13. ISSN 0378-3820
Ranga Dinesh, K.K.J. and Jiang, Xi and van Oijen, J. A. (2013) Direct numerical simulation of nonpremixed syngas burning with detailed chemistry. Fuel, 107. pp. 343-355.
Ranga Dinesh, K.K.J. and Jiang, Xi and van Oijen, J. A. (2013) Hydrogen-enriched non-premixed jet flames:compositional structures with near-wall effects. International journal of hydrogen energy, 38 (12). pp. 5150-5164. ISSN 0360-3199
Ranga Dinesh, K.K.J. and Jiang, Xi and van Oijen, J. A. and Bastiaans, R. J. M. and de Goey, L.P.H. (2013) Hydrogen-enriched nonpremixed jet flames: effects of preferential diffusion. International journal of hydrogen energy, 38 (11). pp. 4848-4863. ISSN 0360-3199
Ranga Dinesh, K.K.J. and Jiang, Xi and van Oijen, J.A. and Bastiaans, R.J.M. and de Goey, L.P.H. (2013) Influence of fuel variability on the characteristics of impinging non-premixed syngas burning. Proceedings of the combustion institute, 34 (2). 3219–3229. ISSN 0082-0784
Safdar, Shakeel and Pinkerton, A. J. and Li, Lin and Sheikh, Mohammed and Withers, Philip (2013) An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys. Applied mathematical modelling, 37 (3). pp. 1187-1195. ISSN 0307-904X
Tambuyzer, T. and Ahmed, T. and Berckmans, D. and Taylor, James and D., Balschun and Aerts, J.-M. (2013) System identification of metabotropic glutamate receptor dependent long–term depression. Neural Computation, 25 (3). pp. 650-670.
Tambuyzer, T. and Ahmed, T. and Taylor, James and Berckmans, D. and D., Balschun and Aerts, J.-M. (2013) Dynamic data–based modelling of synaptic plasticity: mGluR–dependent long–term depression. In: 6th International Conference on Bio–inspired Systems and Signal Processing. UNSPECIFIED, pp. 48-53.
Villanueva Bermejoa, David and Luna, Pilar and Manic, Marina and Najdanovic-Visak, Vesna and Reglero, Guillermo and Fornari, Tiziana (2013) Extraction of caffeine from natural matter using a bio-renewable agrochemical solvent. Food and Bioproducts Processing. ISSN 0960-3085 (In Press)
Wang, Guangming and Ma, Xiandong and Hua, Tianjiang and Zhang, Daibing (2013) Experimental and analytical study on factors influencing biomimetic undulating fin propulsion performance based on orthogonal experimental design. Advanced Robotics. ISSN 0169-1864
Wang, Yifei and Ma, Xiandong and Joyce, Malcolm (2013) Enhancing condition monitoring of distributed generation systems through optimal sensor selection. In: IEEE. UNSPECIFIED. (In Press)
Yu, Min and Zha, Xiaoxiong and Ye, Jianqiao and Li, Yuting (2013) A unified formulation for circle and polygon concrete-filled steel tube columns under axial compression. Engineering structures, 49. pp. 1-10. ISSN 0141-0296
Zha, Xiaoxiong and Wan, Chengyong and Fan, Yong and Ye, Jianqiao (2013) Discrete element modelling of metal skinned sandwich composite panels subject to uniform load. Computational materials science, 69. pp. 73-80. ISSN 0927-0256
Zhang, Dahai and Cross, Philip and Ma, Xiandong and Li, Wei (2013) Improved control of individual blade pitch for wind turbines. Sensors & Actuators A: Physical, 198. pp. 8-14. ISSN 0924-4247
Zhang, Daxu and Xu, Lihua and Ye, Jianqiao (2013) Prediction of failure envelopes and stress strain curves of fiber composite laminates under triaxial loads: comparison with experimental results. Journal of Composite Materials, 47 (6-7). pp. 763-776.
Zhao, Chuanwen and Chen, Xiaoping and Anthony, Edward J. and Jiang, Xi and Duan, Lunbo and Wu, Ye and Dong, Wei and Zhao, Changsui (2013) Capturing CO2 in flue gas from fossil fuel-fired power plants using dry regenerable alkali metal-based sorbent. Progress in energy and combustion science. ISSN 0360-1285
Zheng, Yunzhe and Zhu, Min and Mira Martinez, Daniel and Jiang, Xi (2013) Large-eddy simulation of mixing and combustion in a premixed swirling combustor with synthesis gases. Computers & Fluids. ISSN 0045-7930