Items where Department is "Faculty of Science and Technology > Engineering" and Year is 2013

Abujnah, Nabeil A. and Letizia, Rosa and Hameed, Mohamed Farhat O. and Abdelrazzak, Maher and Obayya, Salah (2013) Slotted microcavity ring resonators for optical storage applications. Optical and Quantum Electronics. ISSN 0306-8919

Cao, Dongpu (2013) Dynamics and control of road vehicles with a tyre failure. In: Vehicle Dynamics and Control 2013, 2013-04-162013-04-16, Cambridge. (In Press)

Cross, Philip and Ma, Xiandong (2013) Condition monitoring for sustainable energy generation of wind turbines. In: The 5th International Conference on Applied Energy (ICAE 2013),, 2013-07-012013-07-04, Pretoria. (In Press)

Cross, Philip and Ma, Xiandong (2013) Feature selection for artificial neural network model-based condition monitoring of wind turbines. In: BINDT. UNSPECIFIED. (In Press)

Cross, Philip and Ma, Xiandong (2013) State dependent parameter model-based condition monitoring for wind turbines. In: BINDT. UNSPECIFIED. (In Press)

Da Ronch, Andrea and McCracken, Andrew and Badcock, Ken and Widhalm, Markus and Campobasso, Sergio (2013) Linear Frequency Domain and Harmonic Balance Predictions of Dynamic Derivatives. Journal of Aircraft. ISSN 0021-8669

E. Zakrzewska, Małgorzata and B. Paninho, Ana and F. Môlho, Marta and V. M. Nunes, Ana and A. M. Afonso, Carlos and A. Rosatella, Andreia and M. Lopes, Joana and Najdanovic-Visak, Vesna (2013) Solubility and phase behaviour of binary systems containing salts based on transitional metals. Journal of chemical thermodynamics, 63. pp. 123-126. ISSN 0021-9614

EL-Zaroug, Omar and Forth, John and Ye, Jianqiao (2013) Prediction of Thermal Cracking in Concrete Structures reinforced with GFRP. In: FRPRCS-11: 11th International Symposiumn on Fibre Reinforced Polymer for Reinforced Concrete Structures. Elsevier. (In Press)

Edgecock, T.R. and Burt, Graeme and Dexter, Amos (2013) High intensity neutrino oscillation facilities in Europe. Physical Review Special Topics: Accelerators and Beams, 16 (2). ISSN 1098-4402

Eshiet, Kenneth and Sheng, Yong and Ye, Jianqiao (2013) Microscopic modelling of the hydraulic fracturing process. Environmental Earth Sciences, 68 (4). pp. 1169-1186.

Gamage, Kelum and Joyce, Malcolm and Taylor, Graeme (2013) Investigation of three-dimensional localisation of radioactive sources using a fast organic liquid scintillator detector. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 707. pp. 123-126.

Jackson, Sarah and Monk, Stephen and Lennox, Katherine (2013) Testing of a scintillator and fibre optic based radiation sensor. Radiation Measurements. ISSN 1350-4487 (In Press)

Jamaluddin, N. and Lam, Dennis and Dai, X. and Ye, Jianqiao (2013) An experimental study on elliptical concrete filled columns under axial compression. Journal of constructional steel research, 87. pp. 6-16. ISSN 0143-974X

Lambert, Christopher and Rennie, Allan and Ma, Xiandong (2013) A Design Academy: Increasing the Commercial Exposure of Engineering Students. In: Proceedings of The 9th International CDIO Conference: Engineering Leadership in Innovation and Design. UNSPECIFIED. (Submitted)

Letizia, Rosa and Paoloni, Claudio and Mineo, Mauro and Pinto, Domenico (2013) Photonic Crystals Assisted Slow Wave Structure for THz Vacuum Devices. In: 14th IEEE International Vacuum Electronic Conference. UNSPECIFIED. (In Press)

Lupa, Chris and Lorkin, Matthew and Robinson, Lyndsey and Dinesh, K. K. J. Ranga and Sweetman, Andrew and Monk, Stephen and Herbert, Ben (2013) Small-scale anaerobic digestion for the treatment of organic waste: A national study. Energy for Sustainable development. ISSN 0973-0826 (In Press)

Lupeanu, Mihaela and Brooks, Hadley and Rennie, Allan and Hill, Dave (2013) Research on deploying technical functional analysis for additive manufacturing of a surgical device for intravitreal interventions. Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică, 75 (1). pp. 141-160. ISSN 1454-2358

Ma, Xiandong and Cross, Philip (2013) A novel condition monitoring and real-time simulation system for wind turbines. In: Proceedings of EWEA 2013 - European Wind Energy Conference & Exhibition. EWEA, Vienna.

Ma, Xiandong and Wang, Yifei and Qin, Jianrong (2013) Generic model of a community-based microgrid integrating wind turbines, photovoltaics and CHP generations. Applied Energy. ISSN 0306-2619 (In Press)

McCabe, Andrew (2013) Constrained optimization of the shape of a wave energy collector by genetic algorithm. Renewable Energy, 51 (n/a). pp. 274-284. ISSN 0960-1481

Mineo, Mauro and Paoloni, Claudio (2013) Improvement of cold parameters of the double corrugated waveguide by geometrical shaping of the corrugations. In: 14th IEEE International Vacuum Electronics Conference. UNSPECIFIED. (In Press)

Ming, Dexiang and Zhong, Xiaopeng and Ma, Xiandong and Liu, Lili (2013) Design of a reconfigurable platform for navigation signal simulation. In: Springer. UNSPECIFIED. (In Press)

Mira Martinez, Daniel and Jiang, Xi and Moulinec, C. and Emerson, D.R. (2013) Numerical investigation of the effects of fuel variability on the dynamics of syngas impinging jet flames. Fuel, 103. 646–662.

Neagu, Corneliu and Lupeanu, Mihaela and Rennie, Allan (2013) A new design concept for milling tools of spherical surfaces obtained by kinematic generation. Applied mathematical modelling, 37 (9). pp. 6119-6134. ISSN 0307-904X

Paoloni, Claudio and Di Carlo, Aldo and Bouamrane, Faycal and Bouvet, Thomas and Durand, Alain J. and Kotiranta, Mikko and Krozer, Viktor and Megtert, Stephan and Mineo, Mauro and Zhurbenko, Vitaliy (2013) Design and realization aspects of 1-THz cascade backward wave amplifier based on double corrugated waveguide. IEEE Transactions on Electron Devices, 60 (3). pp. 1236-1243. ISSN 0018-9383

Paoloni, Claudio and Mineo, Mauro and Yin, Huabi and Zhang, Liang and He, Wenlong and Robertson, Craig W. and Ronald, Kevin and Phelps, Alan D.R. and Cross, Adrian W. (2013) Scaled Design and Test of a Coupler for Micro-Reentrant Square-Cavities for Millimeter Wave Klystrons. In: 14th IEEE International Vacuum Electronic Conference. UNSPECIFIED. (In Press)

Parker, Andrew James and Boxall, Colin and Joyce, Malcolm (2013) A method for the replacement of 137Cs with 40K as a non-hazardous radioactive tracer for open-source decommissioning research applications. Journal of Radioanalytical and Nuclear Chemistry, Articles. ISSN 0236-5731

Pinkerton, Andrew and Mahmood, Khalid (2013) Direct laser deposition with different types of 316L steel particle - a comparative study of final part properties. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. (In Press)

Ranga Dinesh, K.K.J. and Jiang, Xi and Malalasekera, W. and Odedra, A. (2013) Large eddy simulation of fuel variability and flame dynamics of hydrogen-enriched nonpremixed flames. Fuel Processing Technology, 107. pp. 2-13. ISSN 0378-3820

Ranga Dinesh, K.K.J. and Jiang, Xi and van Oijen, J. A. (2013) Direct numerical simulation of nonpremixed syngas burning with detailed chemistry. Fuel, 107. pp. 343-355.

Ranga Dinesh, K.K.J. and Jiang, Xi and van Oijen, J. A. (2013) Hydrogen-enriched non-premixed jet flames:compositional structures with near-wall effects. International journal of hydrogen energy, 38 (12). pp. 5150-5164. ISSN 0360-3199

Ranga Dinesh, K.K.J. and Jiang, Xi and van Oijen, J. A. and Bastiaans, R. J. M. and de Goey, L.P.H. (2013) Hydrogen-enriched nonpremixed jet flames: effects of preferential diffusion. International journal of hydrogen energy, 38 (11). pp. 4848-4863. ISSN 0360-3199

Ranga Dinesh, K.K.J. and Jiang, Xi and van Oijen, J.A. and Bastiaans, R.J.M. and de Goey, L.P.H. (2013) Influence of fuel variability on the characteristics of impinging non-premixed syngas burning. Proceedings of the combustion institute, 34 (2). 3219–3229. ISSN 0082-0784

Safdar, Shakeel and Pinkerton, A. J. and Li, Lin and Sheikh, Mohammed and Withers, Philip (2013) An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys. Applied mathematical modelling, 37 (3). pp. 1187-1195. ISSN 0307-904X

Tambuyzer, T. and Ahmed, T. and Berckmans, D. and Taylor, James and D., Balschun and Aerts, J.-M. (2013) System identification of metabotropic glutamate receptor dependent long–term depression. Neural Computation, 25 (3). pp. 650-670.

Tambuyzer, T. and Ahmed, T. and Taylor, James and Berckmans, D. and D., Balschun and Aerts, J.-M. (2013) Dynamic data–based modelling of synaptic plasticity: mGluR–dependent long–term depression. In: 6th International Conference on Bio–inspired Systems and Signal Processing. UNSPECIFIED, pp. 48-53.

Thomas, Stuart and Adamopoulos, George and Anthopoulos, Thomas (2013) Be-doped ZnO thin-film transistors and circuits fabricated by spray pyrolysis in air. Journal of Display Technology. ISSN 1551-319X

Villanueva Bermejoa, David and Luna, Pilar and Manic, Marina and Najdanovic-Visak, Vesna and Reglero, Guillermo and Fornari, Tiziana (2013) Extraction of caffeine from natural matter using a bio-renewable agrochemical solvent. Food and Bioproducts Processing. ISSN 0960-3085 (In Press)

Wang, Guangming and Ma, Xiandong and Hua, Tianjiang and Zhang, Daibing (2013) Experimental and analytical study on factors influencing biomimetic undulating fin propulsion performance based on orthogonal experimental design. Advanced Robotics. ISSN 0169-1864

Wang, Yifei and Ma, Xiandong and Joyce, Malcolm (2013) Enhancing condition monitoring of distributed generation systems through optimal sensor selection. In: IEEE. UNSPECIFIED. (In Press)

Yu, Min and Zha, Xiaoxiong and Ye, Jianqiao and Li, Yuting (2013) A unified formulation for circle and polygon concrete-filled steel tube columns under axial compression. Engineering structures, 49. pp. 1-10. ISSN 0141-0296

Zha, Xiaoxiong and Wan, Chengyong and Fan, Yong and Ye, Jianqiao (2013) Discrete element modelling of metal skinned sandwich composite panels subject to uniform load. Computational materials science, 69. pp. 73-80. ISSN 0927-0256

Zhang, Daxu and Xu, Lihua and Ye, Jianqiao (2013) Prediction of failure envelopes and stress strain curves of fiber composite laminates under triaxial loads: comparison with experimental results. Journal of Composite Materials, 47 (6-7). pp. 763-776.