On the design and test of a neutron collimator for real-time neutron imaging in the MeV range

Beaumont, Jonathan and Colling, Bethany and Mellor, M. and Joyce, Malcolm (2013) On the design and test of a neutron collimator for real-time neutron imaging in the MeV range. In: Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA), 2013 3rd International Conference on. IEEE, FRA, pp. 1-8. ISBN 9781479910465

Full text not available from this repository.

Abstract

A neutron collimator has been designed in MCNP5 and tested for feasibility of use in imaging applications. Tungsten, polyethylene, PVC and lead have been compared as collimating materials for neutrons in the MeV energy range; tungsten is predicted to be the most successful material for a restricted volume, giving the highest signal-to-noise ratio and the best resolving power. Experimental data has been used to confirm that tungsten works effectively as a neutron collimator although some discrepancies between real and MCNP5 results were observed. A suspension of tungsten powder in polyethylene has also been tested to address the machining difficulties, mass and cost issues associated with tungsten. This material performs midway between tungsten and polyethylene for a constant volume, and more successfully than tungsten for a constant mass therefore giving this material potential as a collimation material in some scenarios. Further MCNP5 modelling has been performed by varying model parameters and monitoring the collimator functions produced by these changes. These results are conclusive but dependent on the applications of the imaging system.

Item Type:
Contribution in Book/Report/Proceedings
ID Code:
70398
Deposited By:
Deposited On:
14 Aug 2014 13:14
Refereed?:
Yes
Published?:
Published
Last Modified:
01 Jan 2020 05:47