Items where Department is "Engineering" and Year is 2013

Journal Article

Abidin, S.Z. and Patel, D. and Saha, B. (2013) Quantitative analysis of fatty acids composition in the used cooking oil (UCO) by gas chromatography-mass spectrometry (GC-MS). Canadian Journal of Chemical Engineering, 91 (12). pp. 1896-1903. ISSN 1939-019X

Abujnah, N.A. and Letizia, Rosa and Hameed, M.F.O. and Obayya, S.S.A. (2013) Efficient design of optical delay lines based on slotted-ring resonators. IET Optoelectronics, 7 (3). pp. 63-70. ISSN 1751-8768

Abujnah, Nabeil A. and Letizia, Rosa and Hameed, Mohamed Farhat O. and Abdelrazzak, Maher and Obayya, Salah (2013) Slotted microcavity ring resonators for optical storage applications. Optical and Quantum Electronics, 45 (6). pp. 503-515. ISSN 0306-8919

Aggidis, George and Benzon, David (2013) Operational optimisation of a tidal barrage across the Mersey estuary using 0-D modelling. Ocean Engineering, 66. pp. 69-81. ISSN 0029-8018

Ahmed, S. and Sheraz, M.A. and Rehman, I.U. (2013) Studies on tolfenamic acid-chitosan intermolecular interactions : Effect of pH, polymer concentration and molecular weight. AAPS PharmSciTech, 14 (2). pp. 870-879. ISSN 1530-9932

Ahmed, S. and Sheraz, M.A. and Yorucu, C. and Rehman, I.U. (2013) Quantitative determination of tolfenamic acid and its pharmaceutical formulation using FTIR and UV spectrometry. Central European Journal of Chemistry, 11 (9). pp. 1533-1541. ISSN 1895-1066

Aiouache, Farid and McAleer, Lisa and Gan, Quan and Al-Muhtaseb, Ala'a and Ahmad, Mohammad (2013) Path lumping kinetic model for aqueous phase reforming of sorbitol. Applied Catalysis A: General, 466. 240–255. ISSN 0926-860X

Al Kheraif, A.A.A. and Qasim, S.S.B. and Ramakrishnaiah, R. and Rehman, I. (2013) Effect of different beverages on the color stability and degree of conversion of nano and microhybrid composites. Dental Materials Journal, 32 (2). pp. 326-331. ISSN 0287-4547

Alexander, Caroline E. and Walsh, Robert W. and Régnier, Stéphane and Cirtain, Jonathan and Winebarger, Amy R. and Golub, Leon and Kobayashi, Ken and Platt, Simon and Mitchell, Nick and Korreck, Kelly and Depontieu, Bart and Deforest, Craig and Weber, Mark and Title, Alan and Kuzin, Sergey (2013) Anti-parallel euv flows observed along active region filament threads with HI-C. Astrophysical Journal Letters, 775 (1): L32. ISSN 2041-8205

Ali Mokhtar, Najib and Jafar, Fairul Azni and Bani Hashim, Ahmad Yusairi and Hasib, Hazman and Muhammad, Mohd Nazrin (2013) Analysis of unimorph piezoceramic patches on damped square shaped plate. Applied Mechanics and Materials, 315. pp. 965-971. ISSN 1660-9336

Ambattu, Praveen and Burt, Graeme and Grudiev, A. and Dolgashev, V. and Dexter, Amos (2013) Multipole components and their minimization in deflecting cavities with standard type couplers. Physical Review Special Topics: Accelerators and Beams, 16 (6): 062001. ISSN 1098-4402

Andrews, James and Bowen, James and Cheneler, David (2013) Optimised determination of viscoelastic properties using compliant measurement systems. Soft Matter, 9. pp. 5581-5593. ISSN 1744-6848

Andrieux, Fabrice and Boxall, Colin and Dickinson, James and Ferrer Huerta, Miriam (2013) Fabrication and characterisation of graphene and its use in formation of Graphene Ring Microelectrodes (GRiMEs). ECS Transactions, 53 (14). pp. 11-22. ISSN 1938-6737

B. Paninho, Ana and V. M. Nunes, Ana and Paiva, Alexandre and Najdanovic-Visak, Vesna (2013) High pressure phase behavior of the binary system (ethyl lactate + carbon dioxide). Fluid Phase Equilibria, 360. 129–133. ISSN 0378-3812

Bandala, Manuel and Joyce, Malcolm (2013) A computer-controlled dynamic phantom for respiratory-gated medical radiotherapy research. IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, E96-A (7). pp. 1609-1616. ISSN 1745-1337

Bandala-Sánchez, Manuel (2013) Interview. Electronics Letters, 49 (11). p. 680. ISSN 0013-5194

Bimbo, Nuno and Ting, Valeska P. and Sharpe, Jessica E. and Mays, Timothy J. (2013) Analysis of optimal conditions for adsorptive hydrogen storage in microporous solids. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 437. pp. 113-119. ISSN 0927-7757

Bowen, James and Cheneler, David and Adams, Mike (2013) Controlling thin liquid film viscosity via modification of substrate surface chemistry. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 418. pp. 112-116. ISSN 0927-7757

Boxall, Colin and Murphy, Pat and Taylor, Robin and Woodhead, Dave (2013) Investigation of water adsorption on metal oxide surfaces under conditions representative of PuO2 storage containers. ECS Transactions, 53 (21). pp. 81-94. ISSN 1938-6737

Bromley, Michael Anthony and Boxall, Colin (2013) The metallisation of insulating substrates with nano-structured metal films of controllable pore dimension. Journal of Materials Chemistry A, 1 (20). pp. 6152-6161. ISSN 2050-7488

Burr, P. A. and Murphy, S. T. and Lumley, S. C. and Wenman, M. R. and Grimes, R. W. (2013) Hydrogen accommodation in Zr second phase particles : Implications for H pick-up and hydriding of Zircaloy-2 and Zircaloy-4. Corrosion Science, 69. pp. 1-4. ISSN 0010-938X

Burr, P. A. and Murphy, S. T. and Lumley, S. C. and Wenman, M. R. and Grimes, R. W. (2013) Hydrogen solubility in zirconium intermetallic second phase particles. Journal of Nuclear Materials, 443 (1-3). pp. 502-506. ISSN 0022-3115

Calado, Marta S. and Petrovski, Zeljko and Manic, Marina S. and Najdanovic-Visak, Vesna and Macedo, Eugenia A. and Visak, Zoran P. (2013) Liquid–liquid equilibria of imidazolium ionic liquids having bistriflamide or triflate anions with aromatic non-polar and polar compounds. Fluid Phase Equilibria, 337. 67–72. ISSN 0378-3812

Cardenas-Lizana, Fernando and Hao, Yufen and Crespo-Quesada, Micaela and Yuranov, Igor and Wang, Xiaodong and Keane, Mark A. and Kiwi-Minsker, Lioubov (2013) Selective gas phase hydrogenation of p-chloronitrobenzene over Pd catalysts : Role of the support. ACS Catalysis, 3 (6). pp. 1386-1396. ISSN 2155-5435

Celik, Kursat and Lupeanu, Mihaela and Rennie, Allan and Neagu, Corneliu and Akinci, Ibrahim (2013) Product re-design using advanced engineering applications and function analysis : a case study for greenhouse clips. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 35 (3). pp. 305-318. ISSN 1678-5878

Chaudhry, A.A. and Knowles, J.C. and Rehman, I. and Darr, J.A. (2013) Rapid hydrothermal flow synthesis and characterisation of carbonate and silicate-substituted calcium phosphates. JOURNAL OF BIOMATERIALS APPLICATIONS, 28 (3). pp. 448-461. ISSN 0885-3282

Chen, Q. and Shang, X. and Tian, Yingtao and Xu, J. and Lancaster, M.J. (2013) SU-8 micromachined WR-3 band waveguide bandpass filter with low insertion loss. Electronics Letters, 49 (7). pp. 480-482. ISSN 0013-5194

Cheneler, David and Bowen, James (2013) Degradation of polymer films. Soft Matter, 9 (2). pp. 344-358. ISSN 1744-6848

Cheneler, David and Mehrban, Nazia and Bowen, James (2013) Spherical indentation analysis of stress relaxation for thin film viscoelastic materials. Rheologica Acta, 52 (7). pp. 695-706. ISSN 0035-4511

Da Ronch, Andrea and McCracken, Andrew and Badcock, Ken and Widhalm, Markus and Campobasso, Sergio (2013) Linear Frequency Domain and Harmonic Balance Predictions of Dynamic Derivatives. Journal of Aircraft, 50 (3). pp. 694-707. ISSN 0021-8669

Darwish, A. and Abdel-Khalik, A.S. and Elserougi, A. and Massoud, A. (2013) Fault current contribution scenarios for grid-connected voltage source inverter-based distributed generation with an LCL filter. Electric Power Systems Research, 104. pp. 93-103. ISSN 0378-7796

Dawson, Richard and Kelsall, Geoff (2013) Pt dissolution and deposition in high concentration aqueous tri-Iodide/iodide solutions. ECS Electrochemistry Letters, 2 (11). D55-D57. ISSN 2162-8726

Dickinson, James W. and Bromley, Michael and Andrieux, Fabrice P. L. and Boxall, Colin (2013) Fabrication and Characterisation of the Graphene Ring Micro Electrode (GRiME) with an Integrated, Concentric Ag/AgCl Reference Electrode. Sensors, 13 (3). pp. 3635-3651. ISSN 1424-8220

E. Zakrzewska, Małgorzata and B. Paninho, Ana and F. Môlho, Marta and V. M. Nunes, Ana and A. M. Afonso, Carlos and A. Rosatella, Andreia and M. Lopes, Joana and Najdanovic-Visak, Vesna (2013) Solubility and phase behaviour of binary systems containing salts based on transitional metals. Journal of Chemical Thermodynamics, 63. pp. 123-126. ISSN 0021-9614

Edgecock, T.R. and Burt, Graeme and Dexter, Amos (2013) High intensity neutrino oscillation facilities in Europe. Physical Review Special Topics: Accelerators and Beams, 16 (2): 021002. ISSN 1098-4402

Elzaroug, Omar and Forth, John and Ye, Jianqiao and Beeby, Andrew (2013) Flexural performance of concrete slabs reinforced with GFRP rebars. Civil and Environmental Research, 5. pp. 6-11. ISSN 2225-0514

Eshiet, Kenneth and Sheng, Yong and Ye, Jianqiao (2013) Microscopic modelling of the hydraulic fracturing process. Environmental Earth Sciences, 68 (4). pp. 1169-1186. ISSN 1866-6299

G, Gupta and Moon, A.P. and Mondal, K. (2013) Electrochemical passivation behaviour of nanocrystalline Fe80Si20 coating in borate buffer solution. Bulletin of Materials Science, 36. pp. 51-58. ISSN 0250-4707

Galindo-Nava, E. I. and Rivera-Díaz-Del-Castillo, P. E.J. (2013) Thermostatistical modelling of hot deformation in FCC metals. International Journal of Plasticity, 47. pp. 202-221. ISSN 0749-6419

Gamage, Kelum and Joyce, Malcolm and Taylor, Graeme (2013) Investigation of three-dimensional localisation of radioactive sources using a fast organic liquid scintillator detector. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 707. pp. 123-126.

García-Moreno, S. and Bandala-Sánchez, M. (2013) Fringing capacitance in sections of circular parallel plates with variable overlapping area. Electronics Letters, 49 (11). pp. 712-714. ISSN 0013-5194

Gavron, Victor and Henzlova, Daniela and Joyce, Malcolm and Kouzes, R. T. and Lavietes, Anthony D. and Menlove, Howard and Pickrell, Mark M. (2013) The IAEA workshop on requirements and potential technologies for replacement of 3He detectors in IAEA safeguards applications. Journal of Nuclear Materials Management, 41 (2). pp. 14-29.

Guo, Hongyan and Chen, Hong and Cao, Dongpu and Jin, Weiwei (2013) Design of a reduced-order nonlinear observer for vehicle velocities estimation. IET Control Theory and Applications, 7 (17). 2056–2068. ISSN 1751-8644

Gómez-Espinosa, Alfonso and Hernández-Guzmán, Víctor M. and Bandala-Sánchez, Manuel and Jiménez-Hernández, Hugo and Rivas-Araiza, Edgar A. and Rodríguez-Reséndiz, Juvenal and Herrera-Ruíz, Gilberto (2013) A new adaptive self-tuning Fourier Coefficients algorithm for periodic torque ripple minimization in permanent magnet synchronous motors (PMSM). Sensors (Switzerland), 13 (3). pp. 3831-3847. ISSN 1424-8220

Haigh, K.F. and Abidin, S.Z. and Vladisavljević, G.T. and Saha, B. (2013) Comparison of Novozyme 435 and Purolite D5081 as heterogeneous catalysts for the pretreatment of used cooking oil for biodiesel production. Fuel, 111. pp. 186-193. ISSN 0016-2361

Haredasht, S. Amirpour and Taylor, C. James and Maes, P. and Verstraeten, W.W. and Clement, J. and Barrios, M. and Lagrou, K. and Van Ranst, M. and Coppin, P. and Berckmans, D. and Aerts, Jean-Marie (2013) Model–based prediction of nephropathia epidemica outbreaks based on climatologic and vegetation data and bank voles population dynamics. Zoonoses and Public Health, 60 (7). pp. 462-477. ISSN 1863-2378

Hasib, Hazman and Yahaya, Saifudin Hafiz and Mohamad, Ahmad Kamely and Bani Hashim, Ahmad Yusairi and Ali Mokhtar, Najib and Simha, Sairam S. (2013) Design and fabrication of cranioplasty prostheses : fit evaluation between phantom-based haptic environment and Materialise 3-Matic Software. Journal of Advanced Manufacturing Technology, 7 (1). pp. 87-96. ISSN 1985-3157

Hou, Xiaonan and Hu, Hong and Silberschmidt, Vadim (2013) A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study. Journal of Materials Science, 48 (24). pp. 8493-8500. ISSN 0022-2461

Huang, H. and Sherif, M. Y. and Rivera-Díaz-Del-Castillo, P. E J (2013) Combinatorial optimization of carbide-free bainitic nanostructures. Acta Materialia, 61 (5). pp. 1639-1647. ISSN 1359-6454

Istanbullu, H. and Ahmed, S. and Sheraz, M.A. and Rehman, I.U. (2013) Development and characterization of novel polyurethane films impregnated with tolfenamic acid for therapeutic applications. Biomed Research International, 2013: 178973. ISSN 2314-6133

Jackson, Sarah and Monk, Stephen and Lennox, Katherine (2013) Testing of a scintillator and fibre optic based radiation sensor. Radiation Measurements, 59. pp. 50-58. ISSN 1350-4487

Jamaluddin, N. and Lam, Dennis and Dai, X. and Ye, Jianqiao (2013) An experimental study on elliptical concrete filled columns under axial compression. Journal of Constructional Steel Research, 87. pp. 6-16. ISSN 0143-974X

Jesson, Peter and Cao, Dongpu (2013) Power consumption analysis of a flexible-wheel suspension planetary rover operating upon deformable terrain. SAE International Journal of Commercial Vehicles, 6 (2): 2013-01-23. pp. 372-380. ISSN 1946-391X

Jiang, Xi and Akber Hassan, Wasim Akram and Gluyas, Jon (2013) Modelling and monitoring of geological carbon storage : a perspective on cross-validation. Applied Energy, 112. pp. 784-792. ISSN 0306-2619

Joyce, Malcolm (2013) Fast neutron multiplicity assay. Nuclear Future, 9. pp. 43-46.

Joyce, Malcolm and Adams, Jamie and Heathcote, J. A. and Mellor, Matthew (2013) Finding the depth of radioactivity in construction materials. Proceedings of the ICE - Energy, 166 (2). pp. 67-73. ISSN 1751-4223

Kang, J. H. and Hosseinkhani, B. and Rivera-Díaz-Del-Castillo, P. E J (2013) Erratum : Rolling contact fatigue in bearings: Multiscale overview (Materials Science and Technology 28: 1 (44-49) DOI: 10.1179/ 174328413X13758854832157). Materials Science and Technology (United Kingdom), 29 (11). p. 1403. ISSN 0267-0836

Kang, J. H. and Hosseinkhani, B. and Williams, C. A. and Moody, M. P. and Bagot, P. A.J. and Rivera-Díaz-Del-Castillo, P. E.J. (2013) Solute redistribution in the nanocrystalline structure formed in bearing steels. Scripta Materialia, 69 (8). pp. 630-633. ISSN 1359-6462

Kang, J. H. and Rivera-Díaz-Del-Castillo, P. E.J. (2013) Carbide dissolution in bearing steels. Computational Materials Science, 67. pp. 364-372. ISSN 0927-0256

Khan, A. and Mir, Niyaz. A. and Haque, M. M. and Muneer, M. and Boxall, C. (2013) Solar Photocatalytic Decolorization of Two Azo Dye Derivatives, Acid Red 17 and Reactive Red 241 in Aqueous Suspension. Science of Advanced Materials, 5 (2). pp. 160-165. ISSN 1947-2935

Khan, A.F. and Awais, M. and Khan, A.S. and Tabassum, S. and Chaudhry, A.A. and Rehman, I.U. (2013) Raman spectroscopy of natural bone and synthetic apatites. APPLIED SPECTROSCOPY REVIEWS, 48 (4). pp. 329-355. ISSN 0570-4928

Khan, A.S. and Aamer, S. and Chaudhry, A.A. and Wong, F.S.L. and Rehman, I.U. (2013) Synthesis and characterizations of a fluoride-releasing dental restorative material. Materials Science and Engineering: A, 33 (6). pp. 3458-3464. ISSN 0921-5093

Khan, A.S. and Wong, F.S.L. and McKay, I.J. and Whiley, R.A. and Rehman, I.U. (2013) Structural, mechanical, and biocompatibility analyses of a novel dental restorative nanocomposite. Journal of Applied Polymer Science, 127 (1). pp. 439-447. ISSN 0021-8995

Kim, B. and Celada, C. and San Martín, D. and Chao, J. and Vara, J. and Rivera-Díaz-Del-Castillo, P. E.J. (2013) Interrupted ageing in steels : Hardness improvement and microstructural stabilization. Scripta Materialia, 68 (12). pp. 945-948. ISSN 1359-6462

Kim, B. and Celada, C. and San Martín, D. and Sourmail, T. and Rivera-Díaz-Del-Castillo, P. E.J. (2013) The effect of silicon on the nanoprecipitation of cementite. Acta Materialia, 61 (18). pp. 6983-6992. ISSN 1359-6454

Kosmeier, S. and De Luca, A. C. and Zolotovskaya, Svetlana and Di Falco, A. and Dholakia, K. and Mazilu, M. (2013) Coherent control of plasmonic nanoantennas using optical eigenmodes. Scientific Reports, 3: 1808. ISSN 2045-2322

Lertlukkanasuk, Noppon and Kiatkittipong, Worapon and Arpornwichanop, Amornchai and Aiouache, Farid and Assabumrungrat, Suttichai (2013) Reactive distillation for synthesis of glycerol carbonate via glycerolysis of urea. Chemical Engineering and Processing: Process Intensification, 70. 103–109. ISSN 0255-2701

Lingwood, Christopher and Burt, Graeme and Gunn, Kester and Carter, Richard and Marchesin, Rodolphe and Jensen, Erk (2013) Automatic Optimization of a Klystron Interaction Structure. IEEE Transactions on Electron Devices, 60 (8). pp. 2671-2676. ISSN 0018-9383

Lumley, S. C. and Murphy, S. T. and Burr, P. A. and Grimes, R. W. and Chard-Tuckey, P. R. and Wenman, M. R. (2013) The stability of alloying additions in Zirconium. Journal of Nuclear Materials, 437 (1-3). pp. 122-129. ISSN 0022-3115

Lupeanu, Mihaela and Brooks, Hadley and Rennie, Allan and Hill, Dave (2013) Research on deploying technical functional analysis for additive manufacturing of a surgical device for intravitreal interventions. Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică, 75 (1). pp. 141-160. ISSN 1454-2358

M. Lopes, Joana and B. Paninho, Ana and F. Môlho, Marta and V. M. Nunes, Ana and Rocha, Angelo and M. T. Lourenço, Nuno and Najdanovic-Visak, Vesna (2013) Biocompatible choline based ionic salts : solubility in short-chain alcohols. Journal of Chemical Thermodynamics, 67. ISSN 0021-9614

Ma, Xiandong and Wang, Yifei and Qin, Jianrong (2013) Generic model of a community-based microgrid integrating wind turbines, photovoltaics and CHP generations. Applied Energy, 112. 1475–1482. ISSN 0306-2619

Mahmood, Khalid and Pinkerton, Andrew (2013) Direct laser deposition with different types of 316L steel particle : a comparative study of final part properties. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (4). pp. 520-531. ISSN 2041-2975

McCabe, Andrew (2013) Constrained optimization of the shape of a wave energy collector by genetic algorithm. Renewable Energy, 51 (n/a). pp. 274-284. ISSN 0960-1481

Metje, Nicole and Kolonko, Anna and Chapman, David and Cheneler, David and Kukureka, Stephen (2013) Methodology for the preparation of polymer samples containing silicon microchips for mechanical testing. Polymer-Plastics Technology and Engineering, 52 (5). pp. 461-471. ISSN 0360-2559

Ming, Dexiang and Zhong, Xiaopeng and Liu, Lili and Ma, Xiandong (2013) Design of a reconfigurable platform for navigation signal simulation. Journal of Networks, 8 (5). pp. 1019-1026. ISSN 1796-2056

Mira Martinez, Daniel and Jiang, Xi (2013) Large-eddy simulations of unsteady hydrogen annular flames. Computers and Fluids, 80. 429–440. ISSN 0045-7930

Mira Martinez, Daniel and Jiang, Xi (2013) Numerical investigations of a hydrogen impinging flame with different finite-rate chemical kinetic mechanisms. Fuel, 109. pp. 285-296. ISSN 1873-7153

Mira Martinez, Daniel and Jiang, Xi and Moulinec, C. and Emerson, D.R. (2013) Numerical investigation of the effects of fuel variability on the dynamics of syngas impinging jet flames. Fuel, 103. 646–662. ISSN 1873-7153

Mira Martinez, Daniel and Jiang, Xi and Moulinec, C. and Emerson, D.R. (2013) Numerical simulations of turbulent non-premixed jet flames of hydrogen-enriched fuels. Computers and Fluids, 88. pp. 688-701. ISSN 0045-7930

Mohammed, M.L. and Patel, D. and Mbeleck, R. and Niyogi, D. and Sherrington, D.C. and Saha, B. (2013) Optimisation of alkene epoxidation catalysed by polymer supported Mo(VI) complexes and application of artificial neural network for the prediction of catalytic performances. Applied Catalysis A: General, 466. pp. 142-152. ISSN 0926-860X

Najdanovic-Visak, Vesna and Nunes da Ponte, Manuel and E. Zakrzewska, Małgorzata and Afonso, Carlos A. M. and A. Rosatella, Andreia and P. Simeonov, Svilen (2013) Solubility of carbon dioxide in ammonium based CO2-induced ionic liquids. Fluid Phase Equilibria. ISSN 0378-3812

Narendra, Kumar and Limiti, Ernesto and Paoloni, Claudio (2013) Dual Fed Distributed Amplifier With Controlled Termination Adjustment. Progress In Electromagnetics Research, 139. pp. 761-777. ISSN 1070-4698

Nazir, R. and Samad Khan, A. and Ahmed, A. and Ur-Rehman, A. and Anwar Chaudhry, A. and Ur Rehman, I. and Wong, F.S.L. (2013) Synthesis and in-vitro cytotoxicity analysis of microwave irradiated nano-apatites. Ceramics International, 39 (4). pp. 4339-4347. ISSN 0272-8842

Neagu, Corneliu and Lupeanu, Mihaela and Rennie, Allan (2013) A new design concept for milling tools of spherical surfaces obtained by kinematic generation. Applied Mathematical Modelling, 37 (9). pp. 6119-6134. ISSN 0307-904X

Orozcoa, Angela M. and Al-Muhtase, Ala'a H. and Rooney, David and Walker, Gavin M. and Aiouache, Farid and Ahmad, Mohammad (2013) Fermentable sugars recovery from lignocellulosic waste-newspaper by catalytic hydrolysis. Environmental Technology (United Kingdom), 34 (22). pp. 3005-3016. ISSN 0959-3330

Pakowski, Antoni and Cao, Dongpu (2013) Effect of soil deformability on off-road vehicle ride dynamics. SAE International Journal of Commercial Vehicles, 6 (2). pp. 362-371. ISSN 1946-391X

Paninho, Ana B. and Barbosa, C. and Nogueira, I. D. and Najdanovic-Visak, Vesna and V. M. Nunes, Ana (2013) (Ethyl lactate)-gel high pressure CO2 extraction for the processing of mesoporous gelatine particles. Journal of Supercritical Fluids, 83. 35–40. ISSN 0896-8446

Paoloni, Claudio and Di Carlo, Aldo and Bouamrane, Faycal and Bouvet, Thomas and Durand, Alain J. and Kotiranta, Mikko and Krozer, Viktor and Megtert, Stephan and Mineo, Mauro and Zhurbenko, Vitaliy (2013) Design and realization aspects of 1-THz cascade backward wave amplifier based on double corrugated waveguide. IEEE Transactions on Electron Devices, 60 (3). pp. 1236-1243. ISSN 0018-9383

Paoloni, Claudio and Narendra, K. and Limiti, Ernesto and Zhurbenko, Vitaliy (2013) PHEMT distributed power amplifier adopting broadband impedance transformer. Microwave Journal. pp. 76-82.

Papaioannou, E. H. and Patsios, S. I. and Karabelas, A. J. and Philippopoulos, N. A. (2013) Characterization of condensates from an indirect olive oil pomace drying process : the effect of drying temperature. Journal of Environmental Chemical Engineering, 1 (4). pp. 831-837. ISSN 2213-2929

Parker, Andrew and Boxall, Colin and Joyce, Malcolm (2013) A method for the replacement of 137Cs with 40K as a non-hazardous radioactive tracer for open-source decommissioning research applications. Journal of Radioanalytical and Nuclear Chemistry, 298 (2). pp. 797-802. ISSN 0236-5731

Parker, Andrew and Boxall, Colin and Joyce, Malcolm and Schotanus, Paul (2013) A thalium-doped sodium iodide well counter for radioactive tracer applications with naturally-abundant 40K. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 722. pp. 5-10. ISSN 0168-9002

Parker, Andrew and Dickinson, James and Boxall, Colin and Joyce, Malcolm (2013) An electrochemical method for the production of graphite oxide. ECS Transactions, 53 (14). pp. 23-32. ISSN 1938-6737

Patel, D. and Kellici, S. and Saha, B. (2013) Some novel aspects of green process engineering. Chimica Oggi/Chemistry Today. ISSN 1973-8250

Pattanasattayavong, Pichaya and Thomas, Stuart and Adamopoulos, George and McLachlan, Martyn A. and Anthopoulos, Thomas D. (2013) p-channel thin-film transistors based on spray-coated Cu2O films. Applied Physics Letters, 102 (16): 163505. ISSN 0003-6951

Pazooki, Alireza and Rakheja, Subhash and Cao, Dongpu (2013) Effect of terrain roughness on the roll and yaw directional stability of an articulated frame steer vehicle. SAE International Journal of Commercial Vehicles, 6 (2). pp. 325-339. ISSN 1946-391X

Ranga Dinesh, K.K.J. and Jiang, Xi and Malalasekera, W. and Odedra, A. (2013) Large eddy simulation of fuel variability and flame dynamics of hydrogen-enriched nonpremixed flames. Fuel Processing Technology, 107. pp. 2-13. ISSN 0378-3820

Ranga Dinesh, K.K.J. and Jiang, Xi and van Oijen, J. A. (2013) Direct numerical simulation of nonpremixed syngas burning with detailed chemistry. Fuel, 107. pp. 343-355. ISSN 1873-7153

Ranga Dinesh, K.K.J. and Jiang, Xi and van Oijen, J. A. (2013) Hydrogen-enriched non-premixed jet flames : compositional structures with near-wall effects. International Journal of Hydrogen Energy, 38 (12). pp. 5150-5164. ISSN 0360-3199

Ranga Dinesh, K.K.J. and Jiang, Xi and van Oijen, J. A. and Bastiaans, R. J. M. and de Goey, L.P.H. (2013) Hydrogen-enriched nonpremixed jet flames: effects of preferential diffusion. International Journal of Hydrogen Energy, 38 (11). pp. 4848-4863. ISSN 0360-3199

Ranga Dinesh, K.K.J. and Jiang, Xi and van Oijen, J.A. and Bastiaans, R.J.M. and de Goey, L.P.H. (2013) Influence of fuel variability on the characteristics of impinging non-premixed syngas burning. Symposium International on Combustion, 34 (2). 3219–3229. ISSN 0082-0784

Rauff-Nisthar, Nadya and Boxall, Colin and Farnan, Ian and Hiezl, Zoltan and Lee, William and Perkins, Chris and Wilbraham, Richard (2013) Corrosion behaviour of AGR simulated fuels : evolution of the fuel surface. ECS Transactions, 53 (21). pp. 95-104. ISSN 1938-6737

Rivera-Díaz-Del-Castillo, P. E.J. and Hayashi, K. and Galindo-Nava, E. I. (2013) Computational design of nanostructured steels employing irreversible thermodynamics. Materials Science and Technology (United Kingdom), 29 (10). pp. 1206-1211. ISSN 0267-0836

Safdar, Shakeel and Pinkerton, A. J. and Li, Lin and Sheikh, Mohammed and Withers, Philip (2013) An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys. Applied Mathematical Modelling, 37 (3). pp. 1187-1195. ISSN 0307-904X

Saha, B. (2013) The Centre for Green Process Engineering (CGPE) opens with launch event at London South Bank University (LSBU). Green Processing and Synthesis, 2 (2). ISSN 2191-9542

Serrano-Vázquez, F. X. and Herrera-May, A. L. and Bandala-Sánchez, M. (2013) Design and modeling of a single-mass biaxial capacitive accelerometer based on the SUMMiT v process. Microsystem Technologies, 19 (12). pp. 1997-2009. ISSN 0946-7076

Shang, Xiaobang and Tian, Yingtao and Lancaster, Michael J. and Singh, Suren (2013) A SU8 micromachined WR-1.5 band waveguide filter. IEEE Microwave and Wireless Components Letters, 23 (6). pp. 300-302. ISSN 1531-1309

Sharpe, Jessica E. and Bimbo, Nuno and Ting, Valeska P. and Burrows, Andrew D. and Jiang, Dongmei and Mays, Timothy J. (2013) Supercritical hydrogen adsorption in nanostructured solids with hydrogen density variation in pores. Adsorption-Journal of the International Adsorption Society, 19 (2). pp. 643-652. ISSN 0929-5607

Sokolovski, S.G. and Zolotovskaya, Svetlana and Goltsov, A. and Pourreyron, C. and South, A.P. and Rafailov, E.U. (2013) Infrared laser pulse triggers increased singlet oxygen production in tumour cells. Scientific Reports, 3: 3484. ISSN 2045-2322

Szost, B. A. and Rivera-Díaz-Del-Castillo, P. E.J. (2013) Unveiling the nature of hydrogen embrittlement in bearing steels employing a new technique. Scripta Materialia, 68 (7). pp. 467-470. ISSN 1359-6462

Szost, B. A. and Vegter, R. H. and Rivera-Díaz-Del-Castillo, Pedro E.J. (2013) Hydrogen-trapping mechanisms in nanostructured steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (10). pp. 4542-4550. ISSN 1073-5623

Szost, B. A. and Vegter, R. H. and Rivera-Díaz-del-Castillo, P. E J (2013) Developing bearing steels combining hydrogen resistance and improved hardness. Materials and Design, 43. pp. 499-506. ISSN 0261-3069

Tahini, H. A. and Chroneos, A. and Bracht, H. and Murphy, S. T. and Grimes, R. W. and Schwingenschloegl, U. (2013) Antisites and anisotropic diffusion in GaAs and GaSb. Applied Physics Letters, 103 (14): 142107. ISSN 0003-6951

Tahini, H. A. and Chroneos, A. and Murphy, S. T. and Schwingenschloegl, U. and Grimes, R. W. (2013) Vacancies and defect levels in III-V semiconductors. Journal of Applied Physics, 114 (6): 063517. ISSN 0021-8979

Tambuyzer, T. and Ahmed, T. and Berckmans, D. and Taylor, C. James and Balschun, D. and Aerts, J.-M. (2013) System identification of metabotropic glutamate receptor dependent long–term depression. Neural Computation, 25 (3). pp. 650-670. ISSN 1530-888X

Taylor, C. James and Robertson, David (2013) State-dependent control of a hydraulically-actuated nuclear decommissioning robot. Control Engineering Practice, 21 (12). pp. 1716-1725. ISSN 0967-0661

Thomas, Stuart and Adamopoulos, George and Anthopoulos, Thomas (2013) Be-doped ZnO thin-film transistors and circuits fabricated by spray pyrolysis in air. Journal of Display Technology, 9 (9). pp. 688-693. ISSN 1551-319X

Toda-Caraballo, Isaac and Galindo-Nava, Enrique I. and Rivera-Díaz-Del-Castillo, Pedro E.J. (2013) Unravelling the materials genome : Symmetry relationships in alloy properties. Journal of Alloys and Compounds, 566. pp. 217-228. ISSN 0925-8388

Ullah, Israr and Sinha, Jyoti and Pinkerton, Andrew (2013) Vibration-based delamination detection in a composite plate. Mechanics of Advanced Materials and Structures, 20 (7). pp. 536-551. ISSN 1537-6494

Ung, B. S. Y. and Li, Jining and Lin, Hungyen and Fischer, B. M. and Withayachumnankul, W. and Abbott, D. (2013) Dual-mode terahertz time-domain spectroscopy system. IEEE Transactions on Terahertz Science and Technology, 3 (2). pp. 216-220. ISSN 2156-342X

V. M. Nunes, Ana and V.S.M. Carrera, Gonçalo and Najdanovic-Visak, Vesna and Nunes da Ponte, Manuel (2013) Solubility of CO2 in glycerol at high pressures. Fluid Phase Equilibria, 358. 105–107. ISSN 0378-3812

Villanueva Bermejoa, David and Luna, Pilar and Manic, Marina and Najdanovic-Visak, Vesna and Reglero, Guillermo and Fornari, Tiziana (2013) Extraction of caffeine from natural matter using a bio-renewable agrochemical solvent. Food and Bioproducts Processing, 91 (4). pp. 303-309. ISSN 0960-3085

Wang, Guangming and Ma, Xiandong and Hua, Tianjiang and Zhang, Daibing (2013) Experimental and analytical study on factors influencing biomimetic undulating fin propulsion performance based on orthogonal experimental design. Advanced Robotics, 27 (8). pp. 597-609. ISSN 0169-1864

Wang, Xiaodong and Perret, Noemie and Delgado, Juan J. and Blanco, Ginesa and Chen, Xiaowei and Olmos, Carol M. and Bernal, Serafin and Keane, Mark A. (2013) Reducible support effects in the gas phase hydrogenation of p-chloronitrobenzene over gold. Journal of Physical Chemistry C, 117 (2). pp. 994-1005. ISSN 1932-7447

Wang, Xiaodong and Perret, Noemie and Keane, Mark A. (2013) Gas phase hydrogenation of nitrocyclohexane over supported gold catalysts. Applied Catalysis A: General, 467. pp. 575-584. ISSN 0926-860X

Wen, W. and M'Guil, S. and Ahzi, S. and Gracio, J.J. (2013) Coupled effects of the lattice rotation definition, twinning and interaction strength on the FCC rolling texture evolution using the viscoplastic φ-model. International Journal of Plasticity, 46. pp. 23-36. ISSN 0749-6419

Wilson, Emma Denise and Rustighi, Emiliano and Newland, Philip L and Mace, Brian R (2013) Slow motor neuron stimulation of locust skeletal muscle : model and measurement. Biomechanics and modeling in mechanobiology, 12 (3). 581–596. ISSN 1617-7940

Woodhouse, Becky and Boxall, Colin and Wilbraham, Richard (2013) Nitric acid reduction on 316L stainless steel under conditions representative of reprocessing. ECS Transactions, 53 (21). pp. 33-44. ISSN 1938-6737

Younas, B. and Khan, A.S. and Muzaffar, D. and Hussain, I. and Chaudhry, A.A. and Rehman, I.U. (2013) In situ reaction kinetic analysis of dental restorative materials. Applied Physics B, 64 (3): 30701. ISSN 1286-0042

Yu, Min and Zha, Xiaoxiong and Ye, Jianqiao and Li, Yuting (2013) A unified formulation for circle and polygon concrete-filled steel tube columns under axial compression. Engineering Structures, 49. pp. 1-10. ISSN 0141-0296

Zakir, M. and Kheraif, A.A.A.A. and Asif, M. and Wong, F.S.L. and Rehman, I.U. (2013) A comparison of the mechanical properties of a modified silorane based dental composite with those of commercially available composite material. Dental Materials, 29 (4). e53-e59. ISSN 0109-5641

Zha, Xiaoxiong and Wan, Chengyong and Fan, Yong and Ye, Jianqiao (2013) Discrete element modeling of metal skinned sandwich composite panels subject to uniform load. Computational Materials Science, 69. pp. 73-80. ISSN 0927-0256

Zhang, Dahai and Aggidis, George and Wang, Yifei and McCabe, Andy and Li, Wei (2013) Experimental results from wave tank trials of a multi-axis wave energy converter. Applied Physics Letters, 103 (10): 103901. ISSN 0003-6951

Zhang, Dahai and Cross, Philip and Ma, Xiandong and Li, Wei (2013) Improved control of individual blade pitch for wind turbines. Sensors and Actuators A: Physical, 198. pp. 8-14. ISSN 0924-4247

Zhang, Daxu and Xu, Lihua and Ye, Jianqiao (2013) Prediction of failure envelopes and stress strain curves of fiber composite laminates under triaxial loads: comparison with experimental results. Journal of Composite Materials, 47 (6-7). pp. 763-776. ISSN 1530-793X

Zhao, Chuanwen and Chen, Xiaoping and Anthony, Edward J. and Jiang, Xi and Duan, Lunbo and Wu, Ye and Dong, Wei and Zhao, Changsui (2013) Capturing CO2 in flue gas from fossil fuel-fired power plants using dry regenerable alkali metal-based sorbent. Progress in Energy and Combustion Science, 39 (6). pp. 515-534. ISSN 0360-1285

Zheng, Yunzhe and Zhu, Min and Mira Martinez, Daniel and Jiang, Xi (2013) Large-eddy simulation of mixing and combustion in a premixed swirling combustor with synthesis gases. Computers and Fluids, 88. pp. 702-714. ISSN 0045-7930

Contribution in Book/Report/Proceedings

Aboshio, Aaron and Green, Sarah and Ye, Jianqiao (2013) Dynamic Response of Inflatable Offshore Fender Barrier Structures under Impact Loading. In: Proceedings of the 14th International Conference on Civil, Structural and Environmental Engineering Computing, CC 2013 :. Civil-Comp Proceedings . Civil-Comp Press, ITA. ISBN 9781905088577

Aboshio, Aaron and Ye, Jianqiao (2013) Dynamic study and optimal design of offshore inflatable barriers subject to impact loading. In: Proceedings of the 15th Young Researchers' Conference, Institution of Structural Engineers, London, UK :. Institution of Structural Engineers, GBR, pp. 10-11.

Aboshio, Aaron and Ye, Jianqiao and Green, Sarah (2013) Pneumatic fluid structure interaction of inflatable offshore fender barriers made of anisotropic hyperelastic composites. In: Proceedings of the 17th International Conference on Composite Structures, Porto, Portugal, 17-21 June 2013 :. UNSPECIFIED, PRT.

Al-Gayem, Qais and Liu, Hong and Khan, Haroon and Richardson, Andrew (2013) Scanning the strength of a test signal to monitor electrode degradation within bio-fluidic microsystems. In: On-Line Testing Symposium (IOLTS), 2013 IEEE 19th International :. IEEE, pp. 133-138.

Beaumont, Jonathan and Colling, Bethany and Mellor, M. and Joyce, Malcolm (2013) On the design and test of a neutron collimator for real-time neutron imaging in the MeV range. In: Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA), 2013 3rd International Conference on :. IEEE, FRA, pp. 1-8. ISBN 9781479910465

Burns, Neil and Burns, Mark and Travis, Darren and Geekie, Louise and Rennie, Allan and Weston, David P. (2013) Novel filter designs that deliver filtration benefits produced by metal additive manufacturing. In: Proceedings of AFS 2013 Fall Conference : Innovation in Filter Media and Membranes. UNSPECIFIED, USA.

Campobasso, Sergio and Piskopakis, Andreas and Yan, Minghan (2013) Analysis of an oscillating wing in a power-extraction regime based on the compressible Reynolds-averaged Navier-Stokes equations and the K–ω SST turbulence model. In: ASME Turbo Expo 2013: Turbine Technical Conference and Exposition : Supercritical CO2 Power Cycles; Wind Energy;. The American Society of Mechanical Engineers, V008T44A013. ISBN 9780791855294

Carter, Richard G. (2013) Radio-frequency power generation. In: CERN Accelerator School : High Power Hadron Machines, CAS 2011 - Proceedings. CERN Accelerator School: High Power Hadron Machines, CAS 2011 - Proceedings . CERN, ESP, pp. 45-69. ISBN 9789290833840

Celik, Kursat and Rennie, Allan and Akinci, Ibrahim (2013) Predicting limit draft force for a chisel tine using FEA based simulation. In: 5th International Conference Trends in Agricultural Engineering (TAE 2013) :. UNSPECIFIED, CZE, pp. 112-117. ISBN 978-80-213-2388-9

Constable, DA (2013) Magic 3-D simulations of a 1.37 THz gyro-multiplier. In: Millimeter Waves and THz Technology Workshop (UCMMT), 2013 6th UK, Europe, China :. UNSPECIFIED, pp. 1-2.

Cross, Philip and Ma, Xiandong (2013) Feature selection for artificial neural network model-based condition monitoring of wind turbines. In: Proceedings of the 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2013 & MFPT 2013) :. BINDT, POL. ISBN 978-1-901892-37-6

Cross, Philip and Ma, Xiandong (2013) Model-based condition monitoring for wind turbines. In: Automation and Computing (ICAC), 2013 19th International Conference on :. IEEE. ISBN 1908549084

Cross, Philip and Ma, Xiandong (2013) State dependent parameter model-based condition monitoring for wind turbines. In: Proceedings of the 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2013 & MFPT 2013) :. BINDT, POL. ISBN 978-1-901892-37-6

Darwish, A. and Abdel-Khalik, A. S. and Massoud, A. and Holliday, D. and Williams, B. W. (2013) A single-stage three-phase DC/AC inverter based on Cuk converter for PV application. In: 2013 7th IEEE GCC Conference and Exhibition (GCC) :. IEEE, pp. 384-389. ISBN 9781479907229

EL-Zaroug, Omar and Forth, John and Ye, Jianqiao (2013) Prediction of thermal cracking in concrete structures reinforced with GFRP. In: FRPRCS-11: 11th International Symposiumn on Fibre Reinforced Polymer for Reinforced Concrete Structures :. Elsevier, PRT.

Galindo-Nava, Enrique and Rivera-Díaz-del-Castillo, Pedro (2013) Modelling dynamic recrystallization in FCC metals employing thermostatistics. In: Recrystallization and Grain Growth V :. Materials Science Forum, 753 . UNSPECIFIED, AUS, pp. 153-156. ISBN 9783037856888

Jackson, Adrian and Campobasso, Sergio (2013) Optimised hybrid parallelisation of a CFD code on many-core architectures. In: 15th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing (SYNASC), 2013 :. IEEE, pp. 488-495. ISBN 9781479930357

Jones, Ashley Richard and Joyce, Malcolm (2013) Pulse-shape discrimination in organic scintillators using the rising edge. In: Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA), 2013 3rd International Conference on :. IEEE, FRA, pp. 1-3. ISBN 9781479910465

Joyce, Malcolm and Aspinall, Michael and Cave, Frank and Lavietes, Anthony (2013) A 16-channel real-time digital processor for pulse-shape discrimination in multiplicity assay. In: Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA), 2013 3rd International Conference on :. IEEE, FRA, pp. 1-5. ISBN 9781479910465

Kalliokoski, Matti and Bailey, Ian and Williams, Peter and Woollett, Nathan and Burt, Graeme and Chattopadhyay, Swapan and Dainton, John and Dexter, Amos and Goudket, Philippe and Pattalwar, Shrikant and Thakker, Trina (2013) Status of the CASCADE microwave cavity experiment. In: Proceedings of the 9th Patras Workshop on Axions, WIMPs and WISPs :. Verlag Deutsches Elektronen-Synchrotron, DEU, pp. 35-38. ISBN 9783935702836

Lambert, Christopher and Rennie, Allan (2013) Development of an Engineering Design Academy: Increasing the commercial exposure of undergraduate students. In: Proceedings of The 30th International Manufacturing Conference : Professional Development of Engineers for Advanced Manufacturing. UNSPECIFIED, IRL, pp. 473-482. ISBN 9781905254750

Lancaster, M.J. and Shang, X. and Tian, Yingtao (2013) Micromachined terahertz circuits. In: Microwave & Optoelectronics Conference (IMOC), 2013 SBMO/IEEE MTT-S International :. IEEE. ISBN 9781479913978

Lavietes, Anthony and Plentada, R. and Mascarenhas, N. and Cronholm, L. M. and Aspinall, Michael and Joyce, Malcolm and Tomanin, A. and Peerani, P. (2013) Development of a liquid scintillator–based active interrogation system for LEU fuel assemblies. In: Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA), 2013 3rd International Conference on :. IEEE, FRA, pp. 1-4. ISBN 9781479910465

Letizia, Rosa (2013) Semiconductor-based THz plasmonic metamaterial. In: Millimeter Waves and THz Technology Workshop (UCMMT), 2013 6th UK, Europe, China :. IEEE, GBR.

Letizia, Rosa and Mineo, Mauro and Paoloni, Claudio (2013) Tapered metallic photonic crystal slow wave structure for THz vacuum electron devices. In: Millimeter Waves and THz Technology Workshop (UCMMT), 2013 6th UK, Europe, China :. IEEE, GBR. ISBN 9781479909810

Letizia, Rosa and Paoloni, Claudio and Mineo, Mauro and Pinto, Domenico (2013) Photonic crystals assisted slow wave structure for THz vacuum devices. In: 14th IEEE International Vacuum Electronic Conference :. IEEE, FRA. ISBN 978-1-4673-5976-4

Lin, Hungyen and May, Robert K. and Evans, M. J. and Zhong, Shuncong and Warr, I. and Gladden, Lynn F. and Shen, Yaochun and Zeitler, J. Axel (2013) Studying pharmaceutical tablet coating process with real-time terahertz in-line sensing. In: Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), 2013 38th International Conference on :. IEEE. ISBN 9781467347174

Lupeanu, Mihaela and Rosu, Maria-Magdalena and Rennie, Allan and Neagu, Corneliu and Brooks, Hadley (2013) The role of technical functional analysis in innovative design of bespoke rapid manufactured parts : medical industry applications. In: Advances in Production, Automation and Transportation Systems : Proceedings of the 6th WSEAS International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS13) and 4th International Conference on Automotive and Transportation. Mathematics and Computers in Science and Engineering Series, 13 . WSEAS Press, ROM, pp. 227-232. ISBN 978-1-61804-193-7

Ma, Xiandong and Cross, Philip (2013) A novel condition monitoring and real-time simulation system for wind turbines. In: Proceedings of EWEA 2013 - European Wind Energy Conference & Exhibition :. EWEA, AUT.

Mineo, Mauro and Paoloni, Claudio (2013) Improvement of cold parameters of the double corrugated waveguide by geometrical shaping of the corrugations. In: 14th IEEE International Vacuum Electronics Conference :. IEEE, FRA. ISBN 978-1-4673-5976-4

Mohan, Suryakeerthi and Paoloni, Claudio (2013) Thermal analysis of THz double corrugated waveguide. In: 2013 6th UK, Europe, China Millimeter Waves and THz Technology Workshop (UCMMT) :. IEEE, Piscataway, N.J.. ISBN 9781479909810

Ménard, J. M. and Porer, M. and Leitenstorfer, A. and Huber, R. and Degl'Innocenti, Riccardo and Zanotto, S. and Biasiol, G. and Sorba, L. and Tredicucci, A. (2013) Sub-cycle switching of a photonic bandstructure via ultrastrong light-matter coupling. In: 18th International Conference on Ultrafast Phenomena, UP 2012 :. EDP Sciences, CHE. ISBN 9782759809561

Nava, Enrique I.Galindo and Toda-Caraballo, Isaac and Rivera-Diaz, Pedro E.J.del Castillo (2013) Strength/elongation optimisation in alloys : A case for accelerated metallurgy research. In: TMS 2013 142nd Annual Meeting and Exhibition, Annual Meeting :. Wiley-Blackwell, pp. 319-326. ISBN 9781118605813

Paoloni, Claudio (2013) New klystron topology based on periodic sequence of high order mode cavities. In: 2013 14th IEEE International Vacuum Electronic Conference Proceedings :. IEEE. ISBN 978-1-4673-5976-4

Paoloni, Claudio (2013) Novel klystron approach for THz frequency amplification. In: 2013 6th UK, Europe, China Millimeter Waves and THz Technology Workshop (UCMMT) :. IEEE, Piscataway, N.J.. ISBN 9781479909810

Paoloni, Claudio and Mineo, Mauro and Yin, Huabi and Zhang, Liang and He, Wenlong and Robertson, Craig W. and Ronald, Kevin and Phelps, Alan D.R. and Cross, Adrian W. (2013) Scaled design and test of a coupler for micro-reentrant square-cavities for millimeter wave klystrons. In: 14th IEEE International Vacuum Electronic Conference :. IEEE, FRA. ISBN 978-1-4673-5976-4

Pitman, Sam and Hu, Julia (2013) A compact and efficient multi-mode antenna for parallel transmission of 7T magnetic resonance imaging. In: 2013 Loughborough Antennas & Propagation Conference :. IEEE, Loughborough, UK, pp. 534-538. ISBN 9781479900916

Platt, S. P. and Hong, Q. and Mein, S. J. and Zhang, L. H. (2013) Neutron and gamma fields at neutron spallation sources for single-event-effects testing. In: Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS :. Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS . Institute of Electrical and Electronics Engineers Inc., GBR. ISBN 9781467350570

Ratcliffe, Michael and Gamage, Kelum (2013) BLDC motor power control techniques appraisal : novel current control technique. In: Power Engineering, Energy and Electrical Drives (POWERENG), 2013 Fourth International Conference on :. IEEE, TUR, pp. 1700-1705.

Rivera-Diaz-del-Castillo, Pedro and Galindo-Nava, Enrique (2013) Tailoring dynamic recrystallization in Ni- and Fe-base high temperature alloys. In: Recrystallization and Grain Growth V :. Materials Science Forum, 753 . UNSPECIFIED, AUS, pp. 427-430. ISBN 9783037856888

Tambuyzer, T. and Ahmed, T. and Taylor, C. James and Berckmans, D. and D., Balschun and Aerts, J.-M. (2013) Dynamic data–based modelling of synaptic plasticity: mGluR–dependent long–term depression. In: 6th International Conference on Bio–inspired Systems and Signal Processing :. UNSPECIFIED, ESP, pp. 48-53.

Taylor, C. James and Chotai, Arun and Tych, Wlodek (2013) Linear and nonlinear non-minimal state space control system design. In: System Identification, Environmental Modelling, and Control System Design :. Springer Verlag London Ltd, pp. 559-581. ISBN 0857299735

Toda-Caraballo, Isaac and Galindo, Enrique I.Nava and Rivera-Díaz, Pedro E.J.del Castillo (2013) Symmetry in material property relationships : A tool for the discovery of new alloys. In: TMS 2013 142nd Annual Meeting and Exhibition, Annual Meeting :. Wiley-Blackwell, pp. 311-318. ISBN 9781118605813

Tsado, Yakubu and Gamage, Kelum and Lund, David (2013) Communication technologies for smart grid ubiquitous sensor network system. In: Power Engineering, Energy and Electrical Drives (POWERENG), 2013 Fourth International Conference on :. IEEE, TUR, pp. 1706-1712.

Turvey, Geoffrey (2013) Testing of pultruded GFRP materials and structures for civil engineering. In: Advanced Composites in Civil Engineering :. Woodhead Publishing Limited, pp. 440-508.

Turvey, Geoffrey (2013) Ultimate loads, strengths, extensions and strains of pultruded GFRP single-lap, single-bolt tension joints. In: Proceedings of the International Conference on Advanced Composites in Construction 2013 :. UNSPECIFIED, pp. 357-367.

Vogel, Michael and Khan, Mushtaq and Ibarra-Medina, Juansethi and Pinkerton, Andrew and N'Dri, Narcisse and Megahed, Mustafa (2013) A coupled approach to weld pool, phase and residual stress modelling of laser direct metal deposition (LDMD) processes. In: 2nd World Congress on Integrated Computational Materials Engineering :. Wiley, USA, pp. 231-236. ISBN 9781118766897

Wang, Yifei and Ma, Xiandong and Joyce, Malcolm (2013) Enhancing condition monitoring of distributed generation systems through optimal sensor selection. In: Industrial Electronics Society, IECON 2013 - 39th Annual Conference of the IEEE :. IEEE, AUT, pp. 7610-7616. ISBN 9781479902248

Yassin, Samy and Lin, Hungyen and Gladden, Lynn F. and Zeitler, J. Axel (2013) Aqueous diffusion in porous polymer powder compacts studied by terahertz pulsed imaging. In: Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), 2013 38th International Conference on :. IEEE. ISBN 9781467347174

Monograph

Titi, Sufian (2013) I.C. air-fuel-ratio control using state-dependent parameter models and sliding mode control. Working Paper. UNSPECIFIED. (Unpublished)

Titi, Sufian (2013) Simulink implementation of a mean value engine model for an internal combustion engine. Technical report, Lancaster University, UK. Working Paper. Lancaster University, Lancaster.

Contribution to Conference

Aboshio, Aaron and Green, Sarah and Ye, Jianqiao (2013) Application of inflatable structures in offshore security. In: Lancaster University, Faculty of Science and Technology, Christmas Conference, 2013-12-17 - 2013-12-17, Lancaster University.

Aboshio, Aaron and Ye, Jianqiao and Green, Sarah (2013) Numerical validation and dynamic study of inflatable offshore barrier structures under impact loading. In: SIMULIA Regional User Meeting, 2013-09-17 - 2013-09-19, Cheshire.

Adams, Mike and Anthony, Carl and Bowen, James and Cheneler, David and Grover, Liam and Kaklamani, Georgina and Carrozza, C. and Oddo, Calogero and Pape, Leo and Kazerounian, Sohrob (2013) NEMS based tactile sensing in an artificial finger. In: Euro Nano Forum 2013, 2013-06-18.

Balmer, Matthew and Gamage, Kelum and Taylor, Graeme (2013) Critical review of directional neutron survey meters. In: IEEE Advancements in Nuclear Instrumentation, Measurement Methods and Analysis (ANIMMA), 2013-06-23 - 2013-06-27, Marseille, France.

Balmer, Matthew and Gamage, Kelum and Taylor, Graeme (2013) A comparison of Geant4 and MCNP for modelling liquid scintillators. In: Neutron Users Club Meeting 2013, 2013-10-16, Teddington, London.

Bouamrane, Faycal and Di Carlo, Aldo and Durand, Alain J. and Kotiranta, Mikko and Krozer, Viktor and Zhurbenko, Vitaliy and Mineo, Mauro and Paoloni, Claudio (2013) LIGA-based Slow Wave Structure for a THz Vacuum Amplifier. In: 10th International Workshop on High Aspect Ratio Micro and Nano System Technology (HARMNST), 2013-04-21 - 2013-04-24.

Cao, Dongpu (2013) Dynamics and control of road vehicles with a tyre failure. In: Vehicle Dynamics and Control 2013, 2013-04-16 - 2013-04-16.

Gamage, Kelum and Joyce, Malcolm and Cave, Frank (2013) A Monte Carlo model for neutron coincidence counting with fast organic liquid scintillation detectors. In: IEEE Advancements in Nuclear Instrumentation, Measurement Methods and Analysis (ANIMMA), 2013-06-23 - 2013-06-27, Marseille, France.

Gamage, Kelum and Joyce, Malcolm and Taylor, Graeme (2013) Location and identification of neutron sources using fast organic liquid scintillator detector. In: Neutron and Ion Dosimetry Symposium (NEUDOS-12), 2013-06-03 - 2013-06-07, Aix-en-Provence, France.

Gamage, Kelum and Taylor, Graeme and Joyce, Malcolm (2013) Estimation of the contribution of primary and secondary radiation to a pinhole volume from a water phantom. In: IEEE Advancements in Nuclear Instrumentation, Measurement Methods and Analysis (ANIMMA), 2013-06-23 - 2013-06-27, Marseille, France.

Gelazanskas, Linas and Gamage, Kelum (2013) Energy management methods in scalable smart grid. In: ICT 2013 - Create Connect Grow, 2013-11-06 - 2013-11-08, Litexpo.

Hayes, Sean and Gamage, Kelum (2013) A Monte Carlo study of scintillator-based coded-aperture neutron imaging. In: Neutron and Ion Dosimetry Symposium (NEUDOS-12), 2013-06-03 - 2013-06-07, Aix-en-Provence, France.

Hayes, Sean and Gamage, Kelum (2013) Scintillator based coded-aperture imaging for neutron detection. In: IEEE Advancements in Nuclear Instrumentation, Measurement Methods and Analysis (ANIMMA), 2013-06-23 - 2013-06-27, Marseille, France.

Kaklamani, Georgina and Cheneler, David and Bowen, James and Anthony, Carl and Grover, Liam and Adams, Mike (2013) Towards rapid manufacture of externally gelated tissue analogues. In: 4th International Conference from Nanoparticles and Nanomaterials to Nanodevices and Nanosystems (IC4N), 2013-06-18.

Laha, Shondipon and Rennie, Allan (2013) How to keep it in for longer : innovation in the Critical Care Unit. In: Lancashire Teaching Hospitals NHS Foundation Trust, Research & Innovation Showcase 2013: ‘Innovation’, 2013-11-06 - 2013-11-06, Royal Preston Hospital. (Unpublished)

Lavietes, Anthony and Joyce, Malcolm and Plentada, R. and Mascarenhas, M. and Cronholm, M. and Aspinall, Michael and Cave, Frank and Tomanin, A. and Peerani, P. (2013) Real-time measurements of production uranium fuel assemblies using a liquid scintillator-based active interrogation neutron detection system. In: UNSPECIFIED.

Mineo, Mauro and Paoloni, Claudio (2013) Vacuum tubes for Terahertz power generation. In: National Vacuum Electronics Conference, NVEC 2013, 2013-06-25, Queen Mary University, London.

Ming, Dexiang and Zhong, Xiaopeng and Ma, Xiandong and Liu, Lili (2013) Design of a reconfigurable platform for navigation signal simulation. In: Proceedings of the 4th China Satellite Navigation Conference (CSNC 2013), 2013-05-15 - 2013-05-17.

Najdanovic-Visak, Vesna (2013) Electrochemical production of organic carbonates under high pressure. In: Workshop on Electrochemical Approaches to Carbon Dioxide Utilization, 2013-07-23, University of Surrey.

Qu, Ting and Chen, Hong and Ji, Yan and Guo, Hongyan and Cao, Dongpu (2013) Modeling driver steering control based on stochastic model predictive control. In: 2013 IEEE International Conference on Systems, Man and Cybernetics (IEEE SMC2013), 2013-10-13 - 2013-10-16.

Richardson, Daniel and Aggidis, George (2013) The economics of multi-axis wave energy converters. In: UNSPECIFIED.

Sharples, Emmy and Letizia, Rosa (2013) New plasmonic materials based split ring resonators for high frequency applications. In: Metamaterials' 2013, 2013-09-16 - 2013-09-19.

Vijayakumar, Bhavani and Rennie, Allan and Burns, Neil and Burns, Mark and Travis, Darren and Battersby, Paul (2013) How additive manufacturing helps in reducing power consumption in pumps. In: Northern Postgraduate Chemical Engineering Conference, 2013-08-08 - 2013-08-09.

Vijayakumar, Bhavani and Rennie, Allan and Burns, Neil and Burns, Mark and Travis, Darren and Battersby, Paul (2013) Introducing functionality to filter media. In: Filter Media 6 International Conference and Exhibition, 2013-11-06 - 2013-11-06.

Vijayakumar, Bhavani and Rennie, Allan and Burns, Neil and Burns, Mark and Travis, Darren and Battersby, Paul (2013) Using additive manufacturing to build energy efficient filter supports. In: 3rd International Conference on Additive Manufacturing Technologies (AM 2013), 2013-10-07 - 2013-10-08.

West, Craig and Cao, Dongpu (2013) Defining ‘critical speed’ in driver-vehicle systems. In: 2013 IEEE International Conference on Systems, Man and Cybernetics (IEEE SMC2013), 2013-10-13 - 2013-10-16.

Wilson, Emma Denise and Assaf, Tareq and Pearson, Martin J and Rossiter, Jonathan M and Anderson, Sean R and Porrill, John (2013) Bioinspired adaptive control for artificial muscles. In: Conference on Biomimetic and Biohybrid Systems, 2013-07-29.

Book/Report/Proceedings

Bromley, Michael and Boxall, Colin (2013) The nanoporous metallisation of polymer membranes through photocatalytically initiated electroless deposition. Processes at the Semiconductor Solution Interface, 53 (6). The Electrochemical Society. ISBN 9781623320287

Burt, Graeme and Dexter, Amos and Woolley, Ben and Tahir, Imran and Syratchev, Igor and Wuensch, Walter (2013) LHC and CLIC LLRF final reports. CERN, Switzerland.

Oikonomou, Charikleia (2013) The Influence of Wave Rollers on the Dynamics of Sandbars in the Nearshore Zone, a Model Study. Institute for Marine and Atmospheric Research, Utrecht University, the Netherlands. Institute for Marine and Atmospheric Research, Utrecht University, the Netherlands. (Unpublished)

Taylor, C. James and Young, Peter and Chotai, Arunkumar (2013) True digital control : statistical modelling and non–minimal state space design. John Wiley & Sons, Ltd, Chichester. ISBN 978-1-118-52121-2

Thesis

Bromley, Michael and Boxall, Colin (2013) The development of nanoporous metal membranes for analytical separartions. PhD thesis, Lancaster University.

Constable, David and Ronald, Kevin and He, Wenlong and Phelps, Alan D.R. (2013) The numerical and experimental investigation of gyro-multiplier configurations. PhD thesis, University of Strathclyde.

Patent

Backstrom, Andreas (2013) Fuel cell stacks. WO2013108000.

Other

Pinkerton, Andrew (2013) Advances and challenges in the modelling of laser melt pool processes : Keynote presentation at the Interfinish SERIA 2013 Asia-Pacific International Conference on Surface Engineering for Research and Industrial Applications. UNSPECIFIED.