Items where Department is "Engineering" and Year is 1998

Journal Article

Adams, E. D. and Shvarts, V. and Haley, Richard P. and Matsunaga, N. and Xia, J. S. (1998) Magnetic susceptibility of He-3 nano-clusters. Journal of Low Temperature Physics, 113 (3-4). pp. 375-380. ISSN 0022-2291

Bradley, D. A. and Seward, D. W. (1998) The development, control and operation of an autonomous robotic excavator. Journal of Intelligent and Robotic Systems, 21 (1). pp. 73-97. ISSN 0921-0296

Carter, Richard G. and Bösch, Wolfgang and Srivastava, Vishnu and Gatti, Giuliano (1998) Computer Simulation of Inter-Modulation Distortion in Broad-Band, Multi-Carrier, Travelling Wave Tube Amplifiers. ITG-Fachbericht (150). pp. 343-348. ISSN 0932-6022

Carter, Richard G. and Qian, Bei Ping and Wang, Gang and Feng, Jin Jun (1998) Computer Modelling of Magnetron Anodes. ITG-Fachbericht (150). pp. 459-464. ISSN 0932-6022

D'Agostino, S and Emma, F and Paoloni, C (1998) Accurate analysis of helix slow-wave structures. IEEE Transactions on Electron Devices, 45 (7). pp. 1605-1613. ISSN 0018-9383

D'Agostino, S and Paoloni, C (1998) Fast prediction and optimization of yield in gallium arsenide large-signal MMICs. International Journal of RF and Microwave Computer-Aided Engineering, 8 (1). pp. 68-76. ISSN 1096-4290

D'Agostino, S and Paoloni, C (1998) An optimization procedure for MMIC large-signal amplifiers. Microwave and Optical Technology Letters, 19 (6). pp. 386-388. ISSN 0895-2477

García, F. and Arias, J.L. and Mayor, B. and Pou, J. and Rehman, I. and Knowles, J. and Best, S. and León, B. and Pérez-Amor, M. and Bonfield, W. (1998) Effect of heat treatment on pulsed laser deposited amorphous calcium phosphate coatings. Journal of Biomedical Materials Research Part A, 43 (1). pp. 69-76. ISSN 0021-9304

Hetherington, Alistair M. and Gray, J. E. and Leckie, C. and McAinsh, Martin R. and Ng, C. and Pical, C. and Priestly, A. J. and Staxén, I. and Webb, A. A. R. (1998) The control of specificity in guard cell signal transduction. Philosophical Transactions of the Royal Society B: Biological Sciences, 353 (1374). pp. 1489-1494. ISSN 0962-8436

Joyce, M. J. (1998) Managing the imagination. Third Millennium Magazine, Spring.

Joyce, M. J. (1998) Silicon: a revolutionary ingredient. Third Millennium Magazine, 1 (4).

Joyce, M. J. and Franklin, K. and Neale, P. J. and Kiffin, S. (1998) What stimulates the creative process? Journal of Design and Technology, 3. pp. 113-117.

Leckie, C. P. and McAinsh, Martin R. and Montgomery, L. T. and Priestly, A. J. and Staxén, I. and Webb, A. A. R. and Hetherington, Alistair M. (1998) Second messengers in guard cells. Journal of Experimental Botany, 49 (Specia). pp. 339-349. ISSN 1460-2431

Leckie, Callum P. and McAinsh, Martin R. and Allen, Gethyn J. and Sanders, Dale and Hetherington, Alistair M. (1998) Abscisic acid-mediates stomatal closure mediated by cyclic ADP-ribose. Proceedings of the National Academy of Sciences of the United States of America, 95 (26). pp. 15837-15842. ISSN 0027-8424

Lees, M. J. and Taylor, C. James and Young, Peter C. and Chotai, Arunkumar (1998) Modelling and PIP control design for open top chambers. Control Engineering Practice, 6 (10). pp. 1209-1216. ISSN 0967-0661

Liang, Zhicheng and Ma, Xiandong and Wang, Haixian and Wang, Like (1998) A portable multi-functional real-time digital simulator dedicated to protective relay testing. Electricity, 9 (4). pp. 27-29. ISSN 1003-4994

McAinsh, Martin R. and Hetherington, Alistair M. (1998) Encoding specificity in Ca2+ signalling systems. Trends in Plant Science, 3 (1). pp. 32-36. ISSN 1360-1385

Moore, Adrian J. and Goldenberg, Leonid M. and Bryce, Martin R. and Petty, Michael C. and Monkman, Andrew P. and Marenco, Claudia and Yarwood, Jack and Joyce, Malcolm J. and Port, Simon N. (1998) Cation recognition by self-assembled layers of novel crown-annelated tetrathiafulvalenes. Advanced Materials, 10 (5). pp. 395-398. ISSN 1521-4095

Rehman, I. and Knowles, J.C. and Bonfield, W. (1998) Analysis of in vitro reaction layers formed on Bioglass® using thin- film X-ray diffraction and ATR-FTIR microspectroscopy. Journal of Biomedical Materials Research Part A, 41 (1). pp. 162-166. ISSN 0021-9304

Robinson, T. R. and Bond, G. and Eglitis, P. and Honary, F. and Rietveld, M. T. (1998) RF heating in a strong auroral electrojet. Advances in Space Research, 21 (5). pp. 689-692.

Srivastava, V. and Ravinder, B. and Sinha, A. K. and Joshi, S. N. and Carter, R. G. (1998) Design of helix slow-wave structure for a high efficiency space TWT. ITG-Fachbericht (150). pp. 349-351. ISSN 0932-6022

Taylor, C. James and Chotai, Arun and Young, Peter C. (1998) Proportional-integral-plus (PIP) control of time delay systems. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 212 (1). pp. 37-48. ISSN 0959-6518

Taylor, C. James and Young, Peter C. and Chotai, Arunkumar and Whittaker, Joseph (1998) Nonminimal state space approach to multivariable ramp metering control of motorway bottlenecks. IEE Proceedings - Control Theory and Applications, 145 (6). pp. 568-574. ISSN 1350-2379

Turvey, G. J. (1998) Single-bolt tension joint tests on pultruded GRP plate: effects of the orientation of the tension direction relative to pultrusion direction. Composite Structures, 42 (4). pp. 341-351.

Turvey, G. J. (1998) Torsion tests on pultruded GRP sheet. Composites Science and Technology, 58 (8). pp. 1343-1351.

Turvey, G. J. and Cooper, C. (1998) Uplift tests on column base connections in pultruded GRP frames. Proceedings of the eighth international conference on composite materials (ECCM-8). pp. 285-292.

Turvey, G. J. and Salehi, M. (1998) Elastic large deflection analysis of stiffened annular sector plates. International Journal of Mechanical Sciences, 40 (1). pp. 51-70.

Ye, J Q (1998) Error bounds on the eigenvalues of a linearized dynamic stiffness matrix. Communications in Numerical Methods in Engineering, 14 (4). pp. 305-312. ISSN 1069-8299

Yu, Z. Z. and Peyton, A. J. (1998) Development of sensor arrays for electromagnetic tomography: compensation of large background signal values. Transactions of the Institute of Measurement and Control, 20 (4). pp. 195-202. ISSN 0142-3312

Yu, Z. Z. and Peyton, A. J. and Xu, L. A. and Beck, M. S. (1998) Electromagnetic inductance tomography (EMT): sensor, electronics and image reconstruction for a system with a rotatable parallel excitation. IEE Proceedings Science Measurement and Technology, 145 (1). pp. 20-25.

Contribution in Book/Report/Proceedings

Allen, Victor and Taylor, L. E. and Barclay, Leslie and Honary, Bahram and Lazarus, Max (1998) Practical propagation measurements for indoor LANs operating at 60 GHz. In: Global Telecommunications Conference, 1998. GLOBECOM 1998. The Bridge to Global Integration. IEEE :. IEEE, Sydney, Australia, pp. 898-903. ISBN 0-7803-4984-9

Bennett, D. and Burge, S. E. and Bradshaw, A. (1998) Non-linear controller design for a highly coupled VSTOL aircraft. In: Proceedings of the UKACC international conference on control ’98 :. UNSPECIFIED, Swansea, pp. 1510-1515.

Bradshaw, A. and Counsell, J. M. (1998) A knowledge based mechatronics approach to controller design. In: Proceedings of the UKACC international conference on control ’98 :. UNSPECIFIED, Swansea, pp. 1723-1727.

Counsell, J. M. and Porter, I. (1998) Schemebuilder mechatronics for flight control systems. In: Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design :. UNSPECIFIED, pp. 197-206.

Counsell, J. M. and Porter, I. (1998) Schemebuilder mechatronics: design principles for controller design. In: Proceedings of ICAM ’98 :. UNSPECIFIED, Okayama, Japan.

Counsell, J. M. and Porter, I. and Duffy, M. (1998) Schemebuilder: CACD for mechanism motion control. In: Proceedings of a workshop on power transmission and motion control :. University of Bath.

Fallows, Keith and Yazdani, Javed and Brown, P and Honary, Bahram (1998) Data protection and transmission over low voltage in-house power line channel. In: Proceedings of the 2nd International Symposium on Power-Line Communications and its Applications :. ISPLC, JPN.

Feng, Jin Jun and Carter, R. G. and Liao, Fu Jiang (1998) Simulation of a long anode magnetron resonant system using MAFIA. In: ICMMT 1998 - 1998 International Conference on Microwave and Millimeter Wave Technology, Proceedings :. ICMMT 1998 - 1998 International Conference on Microwave and Millimeter Wave Technology, Proceedings . Institute of Electrical and Electronics Engineers Inc., CHN, pp. 748-751. ISBN 0780343085

Findlay, J. D. and Seward, D. W. and Mure, J. N. and Scott, J. (1998) Developments in the piling process through advances in technology. In: The value of geotechnics in construction :. Institution of Civil Engineers, London. ISBN 1860812511.

Grout, I. and Burge, S. E. and Winsby, A. J. (1998) Mixed-signal custom IC control processors incorporating design for test/self-test. In: IEE Colloquium on DSP Chips in Real Time Measurement and Control (Digest No: 1997/301) :. IEEE, Leicester, 1/1-1/4.

Jie, Wang and Carter, R. G. (1998) Design of a coaxial window for high power CW magnetron. In: ICMMT 1998 - 1998 International Conference on Microwave and Millimeter Wave Technology, Proceedings :. ICMMT 1998 - 1998 International Conference on Microwave and Millimeter Wave Technology, Proceedings . Institute of Electrical and Electronics Engineers Inc., CHN, pp. 744-747. ISBN 0780343085

Kotsialos, A. and Ellouni, N. and Middelham, F. and van Schuppen, J. and Taylor, C. James (1998) DACCORD: integrated and co-ordinated control. In: 8th World Conference on Transportation Research :. Pergamon. ISBN 0-08-043590-4

Lechner, A. and Richardson, A. M. D. and Hermes, B. and Ohletz, M. (1998) A design for testability study on a high performance automatic gain control circuit. In: Proceedings of the 16th IEEE VLSI test symposium :. IEEE, pp. 376-385.

Lechner, A. and Richardson, A. M. D. and Hermes, B. and Perkins, A. (1998) Design for testability strategies for a high performance gain control circuit. In: Proceedings of the international IEEE mixed signal test workshop :. The Hague.

Mottram, J. T. and Turvey, G. J. (1998) Semi-rigid behaviour of civil engineering structural connection. In: COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections :. European Commission, Brussels/Luxembourg, p. 99.

Mure, N. and Scott, J. N. and Seward, D. W. and Quayle, S. D. (1998) Integrating the business process with automation through object technology in a foundation company. In: Proceedings of ECPPM'98 - the Second European Conference on Product and Process Modelling in the Building Industry :. BRE. ISBN 186081249X

Nagy, Z. and Bradshaw, A. (1998) Comparison of PI and PDF controls of a manipulator arm. In: Proceedings of the UKACC international conference on control ’98 :. UNSPECIFIED, Swansea, pp. 739-744.

Pace, C. and Seward, D. (1998) Development of a safety manager for an autonomous mobile robot. In: Proceedings of the 29th international symposium on robotics 1998: advanced robotics beyond 2000 :. UNSPECIFIED, Birmingham, pp. 277-282.

Porter, I. (1998) Schemebuilder mechatronics. In: Proceedings of the engineering design conference ’98: design reuse :. Brunel University, pp. 561-568.

Porter, I. and Counsell, J. M. and Shao, J. (1998) Knowledge representation for mechatronic systems. In: Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design :. UNSPECIFIED, pp. 181-196.

Prieto, J A and Rueda, A and Grout, I and Peralias, E and Huertas, J L and Richardson, A M D (1998) An approach to realistic fault prediction and layout design for testability in analog circuits. In: Design, Automation and Test in Europe, 1998 Proceedings :. IEEE COMPUTER SOC, LOS ALAMITOS, pp. 905-909. ISBN 0-8186-8359-7

Prieto, J. and Richardson, A. M. D. and Rueda, A. and Grout, I. (1998) An approach to realistic fault prediction and layout design for testability in analogue circuits. In: Proceedings of the conference on design, automation and test in Europe :. UNSPECIFIED, Paris, pp. 906-912.

Richardson, A. M. D. and Lechner, A. and Olbrich, T. (1998) Design for testability strategies for mixed signal and analogue designs: from layout to system. In: Proceedings of the 5th IEEE international conference on electronics, circuits and systems :. UNSPECIFIED, Lisbon, pp. 425-433.

Rosing, R. and Richardson, A. M. D. and Kerkhoff, A. and Acosta, A. (1998) Clock switching : a new design for current test (DcT) method for dynamic logic circuits. In: IDDQ Testing, 1998. Proceedings. 1998 IEEE International Workshop on :. IEEE, pp. 20-25. ISBN 0818691913

Sharif, E. and Dorey, A. P. and Richardson, A. M. D. (1998) An integrated diagnostic reconfiguration (IDR) technique for fault tolerant mixed signal microsystems. In: Proceedings of the IEEE international circuits and systems symposium :. IEEE.

Taylor, C. James and Chotai, Arun and Young, Peter C. (1998) Continuous time Proportional-Integral-Plus (PIP) control with filtering polynomials. In: Proceedings of the UKACC International Conference on Control :. Institution of Electrical Engineers Conference Publication No. 455, pp. 1391-1396.

Turvey, G. J. (1998) Frame connections. In: COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections :. European Commission, Brussels/Luxembourg, pp. 27-49.

Turvey, G. J. (1998) Plate-to-plate mechanical: part II: testing and applications. In: COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections :. European Commission, Brussels/Luxembourg, pp. 15-26.

Turvey, G. J. (1998) Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles. In: Proceedings of the 4th EPTA world pultrusion conference :. European Pultrusion Technology Association, p. 14.

Turvey, G. J. and Cooper, C. (1998) Semi-rigid connection in pultruded GRP frame structures. In: Mechanics of composite materials and structures :. UNSPECIFIED, pp. 151-166.

Turvey, G. J. and Cooper, C. (1998) Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction. In: Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98) :. University of Arizona, pp. 221-235.

Yazdani, Javed and Fallows, Keith and Brown, P. and Honary, Bahram (1998) Multimedia Communications System Operating over Low Voltage Electricity Distribution Network. In: Proceedings of the EPSRC MNA Workshop 1998 (MNA'98), Leeds, UK, 16-17 Nov 1998 :. UNSPECIFIED, GBR.

Ye, Jianqiao (1998) Decay rate of boundary effects in laminated composite cylinders and cylindrical panels. In: Proceedings of the 1998 ASME Engineering Systems Design and Analysis (ESDA) Conference :. UNSPECIFIED.

Contribution to Conference

Richardson, Andrew and Sharif, Erfaan and Dorey, Anthony (1998) An Integrated Diagnostic Reconfiguration (IDR) design approach for fault tolerant mixed signal integrated systems. In: 4th IEEE International Mixed-Signal Testing Workshop, 1998-06-08 - 1998-06-11.