ANN prediction of corrosion behaviour of uncoated and biopolymers coated cp-Titanium substrates

Kumari, Suman and Tiyyagura, Hanuma Reddy and Douglas, Timothy E.L. and Mohammed, Elbeshary A.A. and Adriaens, Annemie and Fuchs-Godec, Regina and Mohan, M.K. and Skirtach, Andre G. (2018) ANN prediction of corrosion behaviour of uncoated and biopolymers coated cp-Titanium substrates. Materials and Design, 157. pp. 35-51. ISSN 0261-3069

[thumbnail of JMAD-D-18-00607R3]
Preview
PDF (JMAD-D-18-00607R3)
JMAD_D_18_00607R3.pdf - Accepted Version
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (3MB)

Abstract

The present study focuses on biopolymer surface modification of cp-Titanium with Chitosan, Gelatin, and Sodium Alginate. The biopolymers were spin coated onto a cp-Titanium substrate and further subjected to Electrochemical Impedance Spectroscopic (EIS) characterization. Artificial Neural Network (ANN) was developed to predict the Open Circuit Potential (OCP) values and Nyquist plot for bare and biopolymer coated cp-Titanium substrate. The experimental data obtained was utilized for ANN training. Two input parameters, i.e., substrate condition (coated or uncoated) and time period were considered to predict the OCP values. Backpropagation Levenberg-Marquardt training algorithm was utilized in order to train ANN and to fit the model. For Nyquist plot, the network was trained to predict the imaginary impedance based on real impedance as a function of immersion periods using the Back Propagation Bayesian algorithm. The biopolymer coated cp-Titanium substrate shows the enhanced corrosion resistance compared to uncoated substrates. The ANN model exhibits excellent comparison with the experimental results in both the cases indicating that the developed model is very accurate and efficiently predicts the OCP values and Nyquist plot.

Item Type:
Journal Article
Journal or Publication Title:
Materials and Design
Additional Information:
This is the author’s version of a work that was accepted for publication in Materials and Design. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Materials and Design, 157, 2018 DOI: 10.1016/j.matdes.2018.07.005
Uncontrolled Keywords:
/dk/atira/pure/subjectarea/asjc/2200/2211
Subjects:
?? mechanics of materialsmaterials science(all)mechanical engineering ??
ID Code:
132279
Deposited By:
Deposited On:
24 Apr 2019 14:20
Refereed?:
Yes
Published?:
Published
Last Modified:
22 Nov 2023 00:40