Items where Department is "Engineering" and Year is 2002

Journal Article

Aggidis, George A. (2002) Current Situation & Perspectives of the British & European Hydro Turbine Industry & Technology for Small Hydro Power Generation.(Invited Keynote Paper). IMechE Conference Transactions, v. 200 (11).

Aiouache, Farid and Goto, Shigeo (2002) Kinetic study on 2-methyl-1-butanol dehydration catalysed by ion exchange resin. Journal of Chemical Engineering of Japan, 35 (5). pp. 436-442. ISSN 0021-9592

Aiouache, Farid and Goto, Shigeo (2002) Rate acceleration of 2-methyl-1-butanol dehydration in a reactive distillation column. Journal of Chemical Engineering of Japan, 35 (5). pp. 443-449. ISSN 0021-9592

Benson, C. and Joyce, Malcolm J. and Winsby, A. and Silvie, J. (2002) Monte-Carlo calculation of the response functions for two prototype cosmic neutron metrology instruments. Journal of Nuclear Science and Technology, S2 (2). pp. 1361-1364. ISSN 0022-3131

Bocking, C. and Jacobson, D.M and Rennie, A.E.W (2002) Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming. Microelectronics International, 19 (1). pp. 30-32.

Boxall, C (2002) Photoelectrochemistry with the optical rotating disc electrode Part 4. Steady state and transient studies on colloidal US in the presence of solution phase photogenerated charge scavengers. Journal of Photochemistry and Photobiology A: Chemistry, 148 (1-3). pp. 375-386. ISSN 1010-6030

Boxall, Colin and Taylor, Robin J. and Mason, Chris and Cooke, R. (2002) The reduction of Pu(IV) by formohydroxamic acid in nitric acid. Journal of Nuclear Science and Technology, supple. pp. 278-281. ISSN 0022-3131

Brook, Isis (2002) Experiencing interiors : ocularcentrism and Merleau-Ponty's redeeming of the role of vision. Journal of the British Society for Phenomenology, 33 (1). pp. 68-77. ISSN 0007-1773

D'Agostino, S and Paoloni, C (2002) On the influence of electron-beam parameters on TWT small-signal gain. Microwave and Optical Technology Letters, 34 (6). pp. 433-434. ISSN 0895-2477

D'Agostino, S and Paoloni, C (2002) A study on helix pitch tolerance impact on TWT small-signal gain. IEEE Electron Device Letters, 23 (12). pp. 746-748. ISSN 0741-3106

Elfick, A. and Birch, M. and Green, Sarah and McCaskie, A. (2002) The influence of opsonins on cellular reaction to polyethylene wear particles. European Cells and Materials, 4 (SUPPL.). ISSN 1473-2262

Elfick, Alistair P. D. and Smith, Simon L. and Green, Sarah M. and Unsworth, Anthony (2002) A re-appraisal of wear features of acetabular sockets using atomic force microscopy. Wear, 253 (7-8). pp. 839-847. ISSN 1873-2577

Gauld, J. K. and Yeoman, T. K. and Davies, J. A. and Milan, S. E. and Honary, F. (2002) Superdarn radar HF propagation and absorption response to the substorm expansion phase. Annales Geophysicae, 20 (10). pp. 1631-1645. ISSN 0992-7689

Gibson, G. and Monk, S. D. and Padgett, M. (2002) A field-portable, laser-diode spectrometer for the ultra-sensitive detection of hydrocarbon gases. Journal of Modern Optics, 49 (5-6). pp. 769-776. ISSN 1362-3044

Hastas, N. A. and Dimitriadis, C. A. and Panayiotatos, Y. and Tassis, D. H. and Logothetidis, S. and Papadimitriou, D. and Roupakas, G. and Adamopoulos, George (2002) High-field transport and noise properties of sputter-deposited amorphous carbon-silicon heterojunctions. Semiconductor Science and Technology, 17 (7). pp. 662-667. ISSN 0268-1242

Hetherington, Alistair M. and Waterhouse, P. M. (2002) Cell signalling and gene regulation : the complexity of signals and level of gene regulation in plants. Current Opinion in Plant Biology, 5 (5). pp. 373-375. ISSN 1369-5266

Kavanagh, A. J. and Honary, F. and McCrea, I. W. and Donovan, E. and Woodfield, E. E. and Manninen, J. and Anderson, P. C. (2002) Substorm related changes in precipitation in the dayside auroral zone-a multi instrument case study. Annales Geophysicae, 20 (9). pp. 1321-1334. ISSN 0992-7689

Kennedy, A.R. (2002) The effect of TiH2 heat treatment on gas release and foaming in Al-TiH2 preforms. Scripta Materialia, 47 (11). pp. 763-767. ISSN 1359-6462

Koltsov, Denis and Joachim, C. and Ondarcuhu, T. and Saifullah, M. (2002) A reliable scheme for fabricating sub-5 nm co-planar junctions for single-molecule electrons. Nanotechnology, 13 (5). pp. 659-662. ISSN 0957-4484

Kosch, M. J. and Rietveld, M. T. and Kavanagh, A. J. and Davis, C. and Yeoman, T. K. and Honary, F. and Hagfors, T. (2002) High-latitude pump-induced optical emissions for frequencies close to the third electron gyro-harmonic. Geophysical Research Letters, 29 (23). pp. 2112-2115. ISSN 0094-8276

Liu, C. and Green, S. M. and Watkins, N. D. and Gregg, P. J. and McCaskie, A. W. (2002) Effect of restraint on the creep behavior of clinical bone cement. Journal of Materials Science Letters, 21 (12). pp. 959-962. ISSN 0261-8028

Liu, C. and Green, S. M. and Watkins, N. D. and Gregg, P. J. and McCaskie, A. W. and Mccaskie, A W (2002) Creep behavior comparison of CMW1 and palacos R-40 clinical bone cements. Journal of Materials Science: Materials in Medicine, 13 (11). pp. 1021-1028. ISSN 0957-4530

Liu, C. Z. and Ren, L. Q. and Tong, J. and Green, S. M. and Arnell, R. D. (2002) Effects of operating parameters on the lubricated wear behavior of a PA-6/UHMWPE blend: a statistical analysis. Wear, 253 (7-8). pp. 878-884. ISSN 1873-2577

Liu, Chaozong and Fairhurst, R. G. and Ren, L. Q. and Green, S. M. and Tong, J. and Arnell, R. D. (2002) Co-deposition of titanium/polytetrafluoroethylene films by unbalanced magnetron sputtering. Surface and Coatings Technology, 149 (2-3). pp. 143-150. ISSN 0257-8972

Ma, X. and Zhou, C. and Kemp, I. J. (2002) Automated wavelet selection and thresholding for PD detection. IEEE Electrical Insulation Magazine, 18 (2). pp. 37-45. ISSN 0883-7554

Ma, X. and Zhou, C. and Kemp, I. J. (2002) Interpretation of wavelet analysis and its application in partial discharge detection. IEEE Transactions on Dielectrics and Electrical Insulation, 9 (3). pp. 446-457. ISSN 1070-9878

Muller, Scott D. and Green, Sarah M. and McCaskie, Andrew W. (2002) The dynamic volume changes of polymerising polymethyl methacrylate bone cement. Acta Orthopaedica Scandinavica, 73 (6). pp. 684-687. ISSN 0001-6470

Najdanovic-Visak, Vesna and Esperanca, JMSS and Rebelo, LPN and da Ponte, MN and Guedes, HJR and Seddon, Kenneth R. and Szydlowski, J (2002) Phase behaviour of room temperature ionic liquid solutions: an unusually large co-solvent effect in (water plus ethanol). Physical Chemistry Chemical Physics, 4 (10). pp. 1701-1703. ISSN 1463-9076

Paoloni, C (2002) Fast computation of FET power gains. Microwave and Optical Technology Letters, 33 (2). pp. 104-106. ISSN 0895-2477

Rebelo, LPN and Najdanovic-Visak, Vesna and Visak, Zoren P. and da Ponte, MN and Troncoso, J and Cerdeirina, CA and Romani, L (2002) Two ways of looking at Prigogine and Defay's equation. Physical Chemistry Chemical Physics, 4 (11). pp. 2251-2259. ISSN 1463-9076

Rebelo, LPN and Visak, Zoren P. and de Sousa, HC and Szydlowski, J and de Azevedo, RG and Ramos, Anita M. and Najdanovic-Visak, Vesna and da Ponte, MN and Klein, J (2002) Double critical phenomena in (water plus polyacrylamides) solutions. Macromolecules, 35 (5). pp. 1887-1895. ISSN 0024-9297

Rennie, Allan E. W. and Bennett, G. and Bocking, C. and Jacobson, D. (2002) The Fabrication of Electronic Packages from High Silicon Aluminium Alloys Using Thin Shell Electroformed (TSE) EDM Electrodes. Transactions of the Institute of Metal Finishing, 80 (3). pp. 92-96. ISSN 0020-2967

Rennie, Allan E. W. and Bocking, C. (2002) Electroforming for Injection Moulding. State of the Art Report - RAPTIA European Thematic Network.

Rietveld, M. T. and Isham, B. and Grydeland, T. and Hoz, C. La and Leyser, T. B. and Honary, F. and Ueda, H. and Kosch, M. and Hagfors, T. (2002) Hf-pump-induced parametric instabilities in the auroral E-region. Advances in Space Research, 29 (9). pp. 1363-1368. ISSN 0273-1177

Rivera-Díaz-Del-Castillo, P. E J (2002) Precipitate coarsening in multicomponent systems. Scripta Materialia, 47 (2). pp. 113-117. ISSN 1359-6462

Rivera-Díaz-Del-Castillo, P. E.J. and Bhadeshia, H. K.D.H. (2002) Theory for growth of needle-shaped particles in multicomponent systems. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 33 (4): 209. pp. 1075-1081. ISSN 1073-5623

Rosing, R. and Reichenbach, R. and Richardson, A. (2002) Generation of component level fault models for MEMS. Microelectronics Journal, 33 (10). pp. 861-868. ISSN 0026-2692

Scholes, S. C. and Green, S. M. and Unsworth, A. (2002) Nanotribological characterisation of alumina femoral heads using an atomic force microscope. Key Engineering Materials, 218-22. pp. 543-548. ISSN 1013-9826

Seward, Derek W. (2002) Automating the construction workplace: positioning and navigational factors. Construction Innovation: Information, Process, Management, 2 (3). pp. 167-189. ISSN 1471-4175

Shackleford, Steven G. D. and Boxall, C and Port, Simon N. and Taylor, Robin J. (2002) An in situ electrochemical quartz crystal microbalance study of polycrystalline gold electrodes in nitric acid solution. Journal of Electroanalytical Chemistry, 538-53. pp. 109-119. ISSN 0022-0728

Sheng, H Y and Ye, J Q (2002) A semi-analytical finite element for laminated composite plates. Composite Structures, 57 (1-4). pp. 117-123. ISSN 0263-8223

Sheng, H Y and Ye, J Q (2002) A state space finite element for laminated composite plates. Computer Methods in Applied Mechanics and Engineering, 191 (37-38). pp. 4259-4276. ISSN 0045-7825

Smith, E. J. and Davison, William and Hamilton-Taylor, John (2002) Methods for preparing synthetic freshwaters. Water Research, 36 (5). pp. 1286-1296. ISSN 0043-1354

Weaver, J. A. and Joyce, M. J. and Peyton, A. J. and Roskell, J. (2002) Recent improvements to a transportable neutron spectrometer (TNS). Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 476 (1-2). pp. 143-148.

Yang, J and Ye, J Q (2002) Dynamic elastic local buckling of piles under impact loads. Structural Engineering and Mechanics, 13 (5). pp. 543-556. ISSN 1225-4568

Yang, J and Ye, J Q (2002) Interfacial stresses in plated beams with cracks. Composite Structures, 57 (1-4). pp. 125-134. ISSN 0263-8223

Yavuz, H. and Bradshaw, A. (2002) On the design and implementation of a mobile robot control system. Journal of Intelligent and Robotic Systems, 34 (1). pp. 1-26. ISSN 0921-0296

del Pozo, C. F. and Honary, F. and Stamatiou, N. and Kosch, M. J. (2002) Study of auroral forms and electron precipitation with the IRIS, DASI and EISCAT systems. Annales Geophysicae, 20 (9). pp. 1361-1375. ISSN 0992-7689

del Pozo, C.F. and Williams, P.J.S. and Gazey, N.J. and Smith, P.N. and Honary, F. and Kosch, M.J. (2002) Multi-instrument observations of the dynamics of auroral arcs: A case study. Journal of Atmospheric and Solar-Terrestrial Physics, 64 (15). pp. 1601-1616. ISSN 1364-6826

delPozo, C. F. and Kosch, M. J. and Honary, F. (2002) Estimation of the characteristic energy of electron precipitation. Annales Geophysicae, 20 (9). pp. 1349-1359. ISSN 0992-7689

Contribution in Book/Report/Proceedings

Adamopoulos, George and Peng, X.L. and Clyne, T.W. and Batchelder, D.N. and Buckley, A. (2002) Etching of CVD Diamond Films Using Different Techniques. In: E-MRS Spring Meeting 2002 June 18 - 21, 2002 SYMPOSIUM K Thin Film Materials for Large Area Electronics :. UNSPECIFIED, FRA, K30.

Binns, R. and Crudgington, K. and Davis, C. L. and Dickinson, S. J. and Morris, P. F. and Peyton, A. J. (2002) Multi-frequency electromagnetic impedance spectroscopy for the detection of phase transformation during strip steel cooling. In: Proceedings of the metallurgy and materials conference :. UNSPECIFIED.

Binns, R. and Davis, C. and Dickinson, S. J. and Morris, P. F. and Peyton, A. J. and Papaelias, M. P. H. and Pritchard, W. D. N. and Strangwood, M. (2002) Developments in the use of electromagnetic methods to monitor cooling transformations in steel samples. In: Proceedings of the IOM conference: instrumentation to innovation - applications and developments in metal production and use :. UNSPECIFIED.

Bissessur, Y. and Peyton, A. J. (2002) A forward model for planar array EMT imaging of cylindrical conductors embedded in a non-conducting medium. In: Proceedings of the 2nd international symposium on process tomography :. UNSPECIFIED.

Boxall, Colin and Taylor, Robin and Xiao, Shaorong and Koltunov, Valentin and Marchenko, Valery (2002) Recent Studies of Heterogeneous and Homogeneous Reduction–Oxidation Reactions of U(IV) Ions in Nitric Acid and TBP Phases. In: Proceedings of 3rd NUCEF International Symposium: NUCEF 2001 : Scientific Basis for Criticality Safety, Separations and Waste Disposal. Japan Atomic Energy Research Institute, JPN, pp. 205-212.

Burbidge, M. J. and Tijou, J. Richardson (2002) Investigations of automatic built in transient step response monitoring for embedded second order charge pump phase locked loop frequency synthesisers. In: Proceedings of the 8th IEEE mixed signal test workshop :. UNSPECIFIED.

Burbidge, Martin J. and Tijou, Jim and Poullet, Frederic and Richardson, Andrew M. D. (2002) Investigations for minimum invasion digital only built in ‘ramp’ based test techniques for charge pump PLLs. In: Proceedings of the Seventh IEEE European Test Workshop, 2002. :. IEEE, pp. 95-102. ISBN 0-7695-1715-3

Geng, R. L. and Belomestnykh, S. and Padamsee, H. and Reilly, J. and Goudket, P. and Dykes, D. M. and Carter, Richard G. (2002) Experimental studies of electron multipacting in CESR type rectangular waveguide couplers. In: Proceedings of the 8th European particle accelerator conference :. UNSPECIFIED.

Geng, R. L. and Belomestnykh, S. and Padamsee, H. and Reilly, J. and Goudket, P. and Dykes, D. M. and Carter, Richard G. (2002) Multipacting induced breakdown in rectangular waveguide couplers. In: Proceedings of the workshop on superconducting RF :. UNSPECIFIED.

Ghosh, T. K. and Carter, Richard G. (2002) Design optimisation of multistage depressed collectors for high efficiency travelling wave tubes using genetic algorithm. In: Proceedings of the 3rd IEEE international vacuum electronics conference, IVEC 2002 :. IEEE, pp. 158-159. ISBN 0-7803-7256-5

Green, Sarah and Elfick, A. P. and Birch, M. A. and McCaskie, A. W. (2002) On the influence of protein adsorption to phagocytosis of model polyethylene particles. In: International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK. Institution of Mechanical Engineers, GBR, L27.

Green, Sarah and Elfick, A. P. and Unsworth, A. (2002) AFM measurement of nanoscale topographical and material wear features. In: International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK. Institution of Mechanical Engineers, GBR, C601/032.

Green, Sarah and Gregg, P. and Liu, C. and Watkins, N. D. and McCaskie, A. W. (2002) Migration of a cemented hip joint prosthesis within a novel composite femur. In: International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK. Institution of Mechanical Engineers, GBR, C601.

Green, Sarah and Scholes, S. C. and Unsworth, A. (2002) Nanoscale wear degradation of alumina femoral head bearing surfaces assessed using an atomic force microscope. In: International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK. Institution of Mechanical Engineers, GBR, C601/036.

Green, Sarah and Scholes, S. C. and Unsworth, A. (2002) The influence of radial clearance and wear testing on the tribology of alumina-alumina total hip prostheses. In: International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK. Institution of Mechanical Engineers, GBR, C601/037.

Higson, S. R. and Drake, P. and Stamp, D. W. and Peyton, A. J. and Binns, R. and Lyons, A. and Lionheart, W. R. B. (2002) Development of a sensor for visualisation of steel flow in the continuous casting nozzle. In: Proceedings of the 21st international ATS steelmaking conference :. UNSPECIFIED.

Jacobson, D.M and Bocking, C. E. and Rennie, Allan (2002) Injection Mould Tool Manufacture in Less Than Five Days. In: RAPRA Rapid Tooling Conference 2002 : Conference Proceedings. RAPRA, GBR, pp. 35-43. ISBN 978-1-85957-313-6

Jenkins, R. O. and Carter, R. G. (2002) Design of helix TWTs for optimum linearity. In: 7th IEEE High Frequency Postgraduate Student Colloquium, HFPSC 2002 :. IEEE High Frequency Postgraduate Student Colloquium . Institute of Electrical and Electronics Engineers Inc., GBR. ISBN 0780376188

Jenkins, R. O. and Carter, Richard G. (2002) Effect of beam parameters on the non-linear performance in broadband helix TWTs. In: Third IEEE International Vacuum Electronics Conference, 2002. IVEC 2002. :. UNSPECIFIED, pp. 286-287. ISBN 0-7803-7256-5

Ma, X. and Zhou, C. and Kemp, I. J. (2002) DSP based partial discharge characterisation by wavelet analysis. In: Proceedings. ISDEIV. XIXth International Symposium on Discharges and Electrical Insulation in Vacuum, 2000. :. IEEE, 780 -783. ISBN 0-7803-5791-4

Ma, X. and Zhou, C. and Kemp, I. J. (2002) Investigation into the use of wavelet theory for partial discharge pulse extraction in electrically noisy environments. In: Dielectric Materials, Measurements and Applications, 2000. Eighth International Conference on (IEE Conf. Publ. No. 473) :. IEE, pp. 123-126. ISBN 0-85296-730-6

Ma, X. and Zhou, C. and Kemp, I. J. (2002) PD pulse propagation studies using the wavelet transform. In: Electrical Insulation and Dielectric Phenomena, 2000 Annual Report Conference on :. IEEE, 626 -629. ISBN 0-7803-6413-9

Ma, X. and Zhou, C. and Kemp, I. J. (2002) Wavelets for the analysis and compression of partial discharge data. In: Conference on Electrical Insulation and Dielectric Phenomena, 2001 Annual Report. :. IEEE, pp. 329-334. ISBN 0-7803-7053-8

Meng, J. and Su, S.Y.W. and Lam, H. and Helal, A. and [Unknown] (2002) Achieving dynamic inter-organizational workflow management by integrating business processes, events and rules. In: 35th Annual Hawaii International Conference on System Sciences, HICSS 2002 :. IEEE. ISBN 0769514359

Mure, N. and Scott, J. N. and Seward, D. W. and Quayle, S. D. and Clayton, C. R. I. and Rust, M. (2002) Just-in-time continuous flight auger piles using an instrumented auger. In: Proceedings of the 19th international symposium on automation and robotics in construction :. UNSPECIFIED.

Pamunuwa, Dinesh B. and Tenhunen, Hannu (2002) On dynamic delay and repeater insertion in distributed capacitively coupled interconnects. In: International Symposium on Quality Electronic Design, 2002. Proceedings. :. IEEE, pp. 240-245. ISBN 0-7695-1561-4

Pamunuwa, Dinesh B. and Zheng, Li-Rong and Tenhunen, Hannu (2002) Optimising bandwidth over deep sub-micron interconnect. In: 2002 IEEE International Symposium on Circuits and Systems :. IEEE, IV-193. ISBN 0-7803-7448-7

Papaelias, M. P. H. and Davis, C. L. and Strangwood, M. and Binns, R. and Peyton, A. J. (2002) Electromagnetic sensors for monitoring phase transformations in steel – experimental results and modelling simulations. In: Proceedings of the TMS conference: modelling the performance of engineering structural materials III :. UNSPECIFIED.

Papaelias, M. P. H. and Davis, C. L. and Strangwood, M. and Binns, R. and Peyton, A. J. (2002) On-line detection of phase transformation and effects of microstructural variability in steel using electromagnetic sensors. In: Proceedings of the metallurgy and materials conference :. UNSPECIFIED.

Peyton, A. J. and Mackin, R. O. and Goss, D. and Crescenzo, E. and Tapp, H. S. (2002) The development of high frequency electromagnetic inductance tomography for low conductivity materials. In: Proceedings of the 2nd international symposium on process tomography :. UNSPECIFIED.

Peyton, A. J. and Mackin, R. O. and Goss, D. and Wan-Daud, W. A. and Crescenzo, E. and Saunders, N. H. and Tapp, H. S. (2002) Addressing the difficulties in using inductive methods to evaluating human body composition. In: Proceedings of the 9th symposium of the société de biométrie humaine :. UNSPECIFIED.

Pinkerton, A. J. and Li, L. (2002) A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders. In: Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO) :. Laser Institute of America.

Pinkerton, A. J. and Li, L. (2002) A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle. In: Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO) :. Laser Institute of America.

Porter, I. and Bradshaw, A. and Counsell, J. M. and Nagy, Z. (2002) Integration of modelling and conceptual design applied to mechatronics. In: Proceedings of the mechatronics forum international conference (Mechatronics 2002) :. UNSPECIFIED.

Rosing, Richard and Wang, Charles and Tucker, Robin and Richardson, Andrew and De Masi, Biagio (2002) Generation of MEMS component models using Cosserat symbolic simulations. In: SPIE Proceedings : design, test, integration, and packaging of MEMS/MOEMS 2002. UNSPECIFIED, pp. 149-154.

Seward, Derek W. and Quayle, Stephen D. and Kied, K. and Pace, C. (2002) Data interpretation from Leuze RotoScan sensor for robot localisation and environment mapping. In: Proceedings of the 19th international symposium on automation and robotics in construction :. UNSPECIFIED.

Taylor, C. James and Bradshaw, A. and Chaplin, R. V. and French, M. and Widden, Martin B. (2002) Wave energy research at Lancaster University: PS frog and frond. In: Proceedings of the world renewable energy congress VII held in Cologne, Germany :. UNSPECIFIED.

Tenhunen, Hannu and Pamunuwa, Dinesh B. (2002) On dynamic delay and repeater insertion. In: IEEE International Symposium on Circuits and Systems, 2002 :. IEEE, pp. 97-100. ISBN 0-7803-7448-7

Weaver, J. A. and Joyce, Malcolm J. and Peyton, A. J. and Roskell, J. (2002) Recent improvements to a transportable neutron spectrometer (TNS). In: Proceedings of a conference on nuclear instruments and methods in physics research :. UNSPECIFIED.

Contribution to Conference

Green, Sarah and Boampong, D. K. and Unsworth, A. (2002) Ion beam modification of Ti6Al4V alloy for TJR. In: 17th European Conference on Biomaterials, 2002-09-10 - 2002-09-14.

Green, Sarah and Elfick, A. P. and Frostick, S. P. and Unsworth, A. (2002) The morphology of UHMWPE wear debris released from shoulder prostheses. In: 17th European Conference on Biomaterials, 2002-09-10 - 2002-09-14.

Green, Sarah and Liu, C. and Watkins, N. D. and McCaskie, A. W. and Gregg, P. J. (2002) Restrained creep of CMW2000 Bone Cement. In: 17th European Conference on Biomaterials, 2002-09-10 - 2002-09-14.

Kosch, M. J. and Rietveld, M. T. and Kavanagh, A. J. and Jussila, J. and Isham, B. and Kaila, K. and McCrea, I. W. and Senior, A. and Holma, H. and Honary, F. and Hagfors, T. (2002) High-latitude artificial aurora using the EISCAT high-gain HF facility. In: 29th General Assembly of the International Union of Radio Science, 1900-01-01.

Pinkerton, A. J. (2002) Laser rapid manufacturing process advancement through powder morphology. In: 'SET for BRITAIN' Reception for Britain’s Younger Engineers, 2002-12-09 - 2002-12-10.

Pinkerton, A. J. and Li, L. (2002) Direct laser deposition layer profiles and the factors affecting them. In: Time Compression Technology (TCT) Conference, 2002-10-16 - 2002-10-17.

Richardson, Andrew and Jeffrey, Carl and Lechner, Andreas (2002) Reconfigurable circuits for fault tolerant systems : factors to consider. In: 8th IEEE Internationa Mixed Signal Testing Workshop, 2002-06-18 - 2002-06-21.

Richardson, Andrew and Tijou, Jim and Burbidge, Martin and Vaid, V (2002) Investigations of automatic built in transient step response monitoring for embedded second order charge pump phase locked loop frequency synthesizers. In: 8th IEEE Internationa Mixed Signal Testing Workshop, 2002-06-18 - 2002-06-21.

Book/Report/Proceedings

Rennie, Allan E. W. and Jacobson, D. M. and Bocking, C., eds. (2002) Rapid Prototyping, Tooling and Manufacturing : Proc. Third National Conference on. Professional Engineering Publishing. ISBN 1-86058-374-1

Aggidis, George A. (2002) Hydropower Developments – New Projects & Rehabilitation / organised by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE). IMechE Event Publications, London.

Thesis

Ghosh, Tushar Kanti and Carter, Richard (2002) Three dimensional modelling and optimisation of multistage collectors. PhD thesis, Lancaster University.

Other

Jacobson, D. and Bocking, C. and Rennie, Allan E. W. (2002) Injection mould tool manufacture in less than five days. Society of Manufacturing Engineers.