Items where Author is "Turvey, Geoffrey"

Journal Article

Esmaeilzadeh, M. and Kadkhodayan, Mehran and Mohammadi, S. and Turvey, Geoffrey (2020) Nonlinear dynamic analysis of moving bilayer plates resting on elastic foundations. Applied Mathematics and Mechanics, 41. pp. 439-458. ISSN 0253-4827

Sotayo, Adeayo and Green, Sarah and Turvey, Geoffrey (2018) Development, Characterisation and Finite Element Modelling of Novel Waste Carpet Composites for Structural Applications. Journal of Cleaner Production, 183. pp. 686-697. ISSN 0959-6526

Turvey, Geoffrey and Cerutti, Xavier (2015) Effects of splice joint geometry and bolt torque of the serviceability response of pultruded glass fibre reinforced polymer composite beams. Composite Structures, 131. pp. 490-500. ISSN 0263-8223

Sotayo, Adeayo and Green, Sarah and Turvey, Geoffrey (2015) Carpet recycling : a review of recycled carpets for structural composites. Environmental Technology and Innovation, 3. pp. 97-107. ISSN 2352-1864

Turvey, Geoffrey (2015) Enhancing the load capacity of pultruded GFRP beams via discrete load redistribution. Composite Structures, 122. pp. 352-360. ISSN 0263-8223

Turvey, Geoffrey and Cerutti, Xavier (2015) Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints. Composite Structures, 119 (1). pp. 543-550. ISSN 0263-8223

Turvey, Geoffrey (2014) Experimental and analytical investigation of two- and six-plate bonded splice joints on serviceability limit deformations of pultruded GFRP beams. Composite Structures, 111. pp. 426-435. ISSN 0263-8223

Kadkhodayan, Mehran and Alamatian, J. and Turvey, Geoffrey and Erfani Moghadam, A. (2012) A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences. Journal of Mechanical Science and Technology, 26 (10). pp. 3231-3242. ISSN 1738-494X

Turvey, Geoffrey and Wang, P. (2007) Failure of pultruded GRP single-bolt tension joints under hot-wet conditions. Composite Structures, 77 (4). pp. 514-520.

Turvey, Geoffrey and Wang, Ping (2007) Thermal preconditioning study for bolted tension joints in pultruded GRP plate. Composite Structures, 77 (4). pp. 509-513. ISSN 0263-8223

Turvey, Geoffrey and Zhang, Y. (2006) A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns. Computers and Structures, 84 (22-23). pp. 1527-1537.

Turvey, Geoffrey (2006) Structural analysis of CFRP-plated pultruded GRP beams. Proceedings of the ICE - Structures and Buildings, 159 (SB2). pp. 65-75. ISSN 1751-7702

Turvey, Geoffrey and Zhang, Y. (2006) Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests. Composites Part A: Applied Science and Manufacturing, 37 (2). pp. 152-164. ISSN 1359-835X

Turvey, Geoffrey and Wang, P. (2003) Open-hole tension strength of pultruded GRP plate. Proceedings of the ICE - Structures and Buildings, 156 (1). pp. 93-101. ISSN 1751-7702

Contribution in Book/Report/Proceedings

Turvey, Geoffrey (2014) An experimental investigation of the failure of pultruded GFRP single-lap two-bolt connections in tension’. In: Proceedings of the International Conference, FRP Bridges 2014 :. UNSPECIFIED.

Turvey, Geoffrey (2013) Testing of pultruded GFRP materials and structures for civil engineering. In: Advanced Composites in Civil Engineering :. Woodhead Publishing Limited, pp. 440-508.

Turvey, Geoffrey (2013) Ultimate loads, strengths, extensions and strains of pultruded GFRP single-lap, single-bolt tension joints. In: Proceedings of the International Conference on Advanced Composites in Construction 2013 :. UNSPECIFIED, pp. 357-367.

Turvey, Geoffrey (2011) Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites. In: Composite joints and connections: principles, modelling and testing :. Woodhead Publishing Limited, Cambridge, pp. 77-111. ISBN 978-1-845569-990-1

Turvey, Geoffrey and Wang, P. (2006) An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design. In: Proceedings of the 6th international conference on computational mechanics (ECCM 2006) :. UNSPECIFIED.

Turvey, Geoffrey (2006) Failure of pultruded GRP WF-section webs in compression - an experimental investigation. In: Proceedings of the 12th European conference on composite materials (ECCM-12) :. UNSPECIFIED.

Turvey, Geoffrey and Wang, P. (2006) Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency. In: Proceedings of the 2nd international conference on joining plastics 2006. :. UNSPECIFIED.

Contribution to Conference

Holton, John and Turvey, Geoffrey (2019) Effect of Shear on the Flexure of Pultruded GFRP Tubes. In: International Conference on Advanced Composites in Construction, 2019-09-03 - 2019-09-05, Edgbaston Park Hotel and Conference Centre, University of Birmingham.

Sotayo, Adeayo and Green, Sarah and Turvey, Geoffrey (2014) Developing novel structural composites from recycled materials. In: UNSPECIFIED.

Turvey, Geoffrey (2014) Single- and double-lap bolted joints in pultruded composite plate. In: Joining Technologies of Fibre-Reinforced Polymer Composite Materials, 2014-05-08, Warwick Manufacturing Group, University of Warwick.

Turvey, Geoffrey and Gode, Julien (2012) An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate. In: FRP Bridges 2012, 2012-09-13 - 2012-09-14.

Turvey, Geoffrey (2012) Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate. In: 6th International Conference on Composites in Construction Engineering (CICE), 2012-06-13 - 2012-06-15.

Turvey, Geoffrey (2011) Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions. In: International Conference on Advanced Composites in Construction (ACIC 2011), 2011-09-06 - 2011-09-08.

Turvey, Geoffrey (2010) Cross-stiffened circular plates: an elasto-plastic large deflection analysis. In: 10th International Conference on Computational Structures Technology (CST 2010), 2010-09-14 - 2010-09-17.

Turvey, Geoffrey (2010) Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams. In: 7th BSSM International Conference on Advances in Experimental Mechanics, 2010-09-07 - 2010-09-09.

Turvey, Geoffrey (2009) An experimental investigation of bolt pull-through in pultruded GRP plate. In: 4th International Conference on Advanced Composites in Construction (ACIC2009), 2009-09-01 - 2009-09-03.

Turvey, Geoffrey and Wang, Pu (2009) Failure of pultruded GRP angle leg junctions in tension. In: 17th International Conference on Composite materials, 2009-07-27 - 2009-07-31.

Turvey, Geoffrey (2008) Bending of tip-loaded CFRP stiffened pultruded GRP cantilevers: comparison between theory and experiment. In: 13th European Conference on Composite Materials (ECCM 13), 2008-06-02 - 2008-06-05.

Turvey, Geoffrey and Wang, Pu (2007) Effect of hole clearance on bolt loads in pultruded GRP tension joints. In: 16th International Conference on Composite Materials (ICCM-16), 2007-07-08 - 2007-07-13.

Turvey, Geoffrey and Salehi, Manouchehr (2007) Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener. In: Proceedings of Professor James Rhodes Retiral Conference on Thin-Walled Structures, 2007-06-26 - 2007-06-27.

Turvey, Geoffrey and Zhang, Yingshun (2007) Opening mode failure of pultruded GRP angle leg junctions. In: 3rd International Conference on Advanced Composites in Construction (ACIC 07), 2007-04-02 - 2007-04-04.

Thesis

Sotayo, Adeayo and Green, Sarah and Turvey, Geoffrey (2016) Development and characterisation of novel structural composites from recycled materials. PhD thesis, Lancaster University.