Items where Author is "Turvey, G. J."

Journal Article

Turvey, G. J. and Wang, P. (2009) Environmental effects on the failure of GRP multi-bolt joints. Proceedings of the ICE - Structures and Buildings, 162 (4). pp. 275-287. ISSN 0965-0911

Kadkhodayan, A. and Alamatian, J. and Turvey, G. J. (2008) A new fictitious time for the dynamic relaxation (DXDR) method. International Journal for Numerical Methods in Engineering, 74 (6). pp. 996-1018. ISSN 0029-5981

Turvey, G. J. and Salehi, M. (2008) Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener. Thin-Walled Structures, 46 (7-9). pp. 991-1002. ISSN 0263-8231

Turvey, G. J. and Salehi, M. (2001) Elasto-plastic response of uniformly loaded sector plates: full-section yield model predictions and spread of plasticity. Computers and Structures, 79 (26-28). pp. 2335-2348.

Turvey, G. J. and Mulcahy, N. and Widden, M. B. (2000) Experimental and computed natural frequencies of square pultruded GRP plates: effects of anisotropy, hole size ratio and edge support conditions. Composite Structures, 50 (4). pp. 391-403.

Turvey, G. J. (2000) Bolted connections in PFRP structures. Progress in Structural Engineering and Materials, 2 (2). pp. 146-156. ISSN 1528-2716

Turvey, G. J. and Cooper, C. (2000) Semi-rigid column base connections in pultruded GRP frame structures. Computers and Structures, 76 (1-3). pp. 77-88.

Turvey, G. J. (1999) Flexure of pultruded GRP beams with semi-rigid end connections. Composite Structures, 47 (1). pp. 571-580.

Turvey, G. J. and Salehi, M. (1998) Elastic large deflection analysis of stiffened annular sector plates. International Journal of Mechanical Sciences, 40 (1). pp. 51-70.

Turvey, G. J. (1998) Single-bolt tension joint tests on pultruded GRP plate: effects of the orientation of the tension direction relative to pultrusion direction. Composite Structures, 42 (4). pp. 341-351.

Turvey, G. J. (1998) Torsion tests on pultruded GRP sheet. Composites Science and Technology, 58 (8). pp. 1343-1351.

Turvey, G. J. and Cooper, C. (1998) Uplift tests on column base connections in pultruded GRP frames. Proceedings of the eighth international conference on composite materials (ECCM-8). pp. 285-292.

Turvey, G. J. (1997) Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections. Composite Structures, 38 (1). pp. 3-16.

Turvey, G. J. and Salehi, M. (1997) Circular plates with one diametral stiffener: an elastic large deflection analysis. Computers and Structures, 63 (4). pp. 775-783.

Turvey, G. J. and Drinali, H. (1997) Non-linear first yield analysis of circular plates subjected to combined uniform pressure and edge compression. Computers and Structures, 63 (4). pp. 769-773.

Turvey, G. J. (1996) Effect of load position on the lateral buckling of pultruded GRP cantilevers - correlations between experiment and theory. Composite Structures, 35 (1). pp. 33-47.

Turvey, G. J. and Osman, M. Y. (1996) Elastic and initial flexural failure analysis of unsymmetrically laminated cross-ply strips. Composites Part B: Engineering, 27 (5). pp. 505-518.

Turvey, G. J. (1996) Lateral buckling tests on rectangular cross-section pultruded GRP cantilever beams. Composites Part B: Engineering, 27 (1). pp. 35-42.

Cooper, C. and Turvey, G. J. (1995) Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material. Composite Structures, 32 (1-4). pp. 217-226.

Brooks, R. J. and Turvey, G. J. (1995) Lateral buckling of pultruded GRP I-section cantilevers. Composite Structures, 32 (1-4). pp. 203-215.

Kobayashi, H. and Turvey, G. J. (1994) Elastic small deflection analysis of annular sector mindlin plates. International Journal of Mechanical Sciences, 36 (9). pp. 811-827.

Contribution in Book/Report/Proceedings

Turvey, G. J. (2000) Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats. In: Proceedings in the ECCM9 (composites – from fundamentals to exploitation) :. UNSPECIFIED, Brighton.

Turvey, G. J. and Osman, M. Y. (2000) Uniform and patch loaded steel plates – comparisons between analysis and experiment. In: Proceedings of the 5th international conference on computational structures technology :. UNSPECIFIED, Leuven.

Turvey, G. J. and Osman, M. Y. (2000) Uniform and patch loaded steel plates: comparisons between analysis and experiment. In: Computational steel structures technology :. Civil-Comp Press, Edinburgh, pp. 49-59. ISBN 0-948749-72-5

Turvey, G. J. (1999) Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections. In: Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999 :. RAPRA, pp. 1-8. ISBN 978-1-85957-199-6

Turvey, G. J. (1999) Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1. In: Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections :. UNSPECIFIED, Liege, pp. 547-556.

Turvey, G. J. (1998) Frame connections. In: COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections :. European Commission, Brussels/Luxembourg, pp. 27-49.

Turvey, G. J. (1998) Plate-to-plate mechanical: part II: testing and applications. In: COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections :. European Commission, Brussels/Luxembourg, pp. 15-26.

Turvey, G. J. (1998) Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles. In: Proceedings of the 4th EPTA world pultrusion conference :. European Pultrusion Technology Association, p. 14.

Mottram, J. T. and Turvey, G. J. (1998) Semi-rigid behaviour of civil engineering structural connection. In: COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections :. European Commission, Brussels/Luxembourg, p. 99.

Turvey, G. J. and Cooper, C. (1998) Semi-rigid connection in pultruded GRP frame structures. In: Mechanics of composite materials and structures :. UNSPECIFIED, pp. 151-166.

Turvey, G. J. and Cooper, C. (1998) Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction. In: Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98) :. University of Arizona, pp. 221-235.

Turvey, G. J. and Salehi, M. (1997) Full-section yield analysis of uniformly loaded sector plates. In: Trends in structural mechanics: theory, practice and education :. Solid mechanics and its applications (v. 54). Kluwer Academic, Dordrecht; London, pp. 289-298. ISBN 0792346033

Turvey, G. J. and Cooper, C. (1996) Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections. In: Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II) :. Canadian Society for Civil Engineering, Montreal, pp. 927-934.

Turvey, G. J. and Drinali, H. (1996) Full-range response of circular steel plates subjected to combined transverse pressure and edge compression. In: Advances in computational techniques for structural engineering :. Civil-Comp Press, Edinburgh. ISBN 0948749458

Turvey, G. J. and Brooks, R. J. (1996) Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions. In: Proceedings of the 1st international conference on composites in infrastructure (ICCI '96) :. University of Arizona, pp. 651-664.

Turvey, G. J. and Cooper, C. (1996) Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics. In: ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential :. Woodhead Publishing Limited, Cambridge, pp. 295-300. ISBN 1855733048.

Turvey, G. J. (1996) Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project. In: Structural design of polymer composites: EUROCOMP design code and handbook :. E. and FN Spon, London, pp. 719-741. ISBN 0419194509.

Turvey, G. J. and Salehi, M. (1995) Large deflection analysis of eccentrically stiffened sector plates. In: Proceedings of a conference on developments in computational techniques for civil engineering (CIVIL-COMP 95) :. Civil-Comp Press, Edinburgh, pp. 243-253.

Turvey, G. J. and Cooper, C. (1995) Single bolt tension joint tests on pultruded GRP WF-section web and flange material. In: Proceedings of the 10th international conference on composite materials (ICCM-10) :. Woodhead Publishing Ltd., Vancouver, pp. 621-628.

Turvey, G. J. (1995) Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project. In: EUROCOMP design guide and background projects :. Chapman and Hall, London.

Kobayashi, H. and Ishikawa, K. and Turvey, G. J. (1994) On bending of rhombic plates. In: Proceedings of the annual conference of Japanese society of civil engineers :. UNSPECIFIED.

Turvey, G. J. (1992) Tension/compression strength of unnotched/notched pultruded GRP plate. In: Proceedings of the ECCM-composites testing and standardisation conference :. UNSPECIFIED.

Turvey, G. J. and Slater, R. C. (1992) Tests on pultruded GRP posts for handrail/barrier structures. In: First international conference on advanced composite materials in bridges and structures :. UNSPECIFIED, Canada.