Experimental study and DEM modelling of bolted composite lap joints subjected to tension

Yu, M. and Yang, B. and Chi, Y. and Xie, J. and Ye, J. (2020) Experimental study and DEM modelling of bolted composite lap joints subjected to tension. Composites Part B: Engineering, 190: 107951. ISSN 1359-8368

Text (3d_dem_joints_final_rev)
3d_dem_joints_final_rev.pdf - Accepted Version
Available under License Creative Commons Attribution Non-commercial No Derivatives.
Download (3MB)

Abstract

This paper presents a numerical approach using the discrete element method to predict strength and damage propagation of plates and bolted lap joints subjected to axial tension. Tensile tests on GFRP plates and bolted joints are carried to obtained their overall stiffness and strength. A new three-dimensional discrete element model constructed by a 19-ball assembly is proposed and the relationships between the macro and the micro mechanical properties of FRP is established through calibrations using the test results. The calibrated DEM model is then used to reproduce the test results. Excellent agreements are achieved between the numerical and the experimental results in terms of not only the overall failure loads, but also the detailed failure modes, including cracking and delamination. The research shows great potential of the DEM model in predicting strength of composite materials and presenting detailed local damage and damage propagation at micro-scale, which represents a significant advantage over the conventional numerical methods, such as the finite element method. © 2020 Elsevier Ltd

Item Type:

Journal Article

Journal or Publication Title:

Composites Part B: Engineering

Additional Information:

This is the author’s version of a work that was accepted for publication in Composites Part B: Engineering. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Composites Part B: Engineering, 190, 2020 DOI: 10.1016/j.compositesb.2020.107951

Uncontrolled Keywords:

/dk/atira/pure/subjectarea/asjc/2200/2211

Subjects:

?? bolted jointdiscrete element methodfiber reinforced polymerstrength calibrationbolted jointsboltsfiber reinforced plasticsfibersfinite difference methodnumerical methodstensile testingaxial tensionsdamage propagationdiscrete element modelingfiber reinforc ??

Departments:

Faculty of Science and Technology > Engineering

ID Code:

142540

Deposited By:

ep_importer_pure

Deposited On:

20 Mar 2020 13:20

Refereed?:

Yes

Published?:

Published