Items where Author is "Green, Sarah"

Journal Article

Sardar, Suneela and Degueldre, Claude and Green, Sarah (2024) Multiscale Approach of Investigating the Density of Simulated Fuel for a Zero Power Reactor. Journal of Nuclear Engineering, 5 (3). pp. 420-435. ISSN 2673-4362

Degueldre, Claude and Findlay, Joshua and Cheneler, David and Sardar, Suneela and Green, Sarah (2024) Short life fission products extracted from molten salt reactor fuel for radiopharmaceutical applications. Applied Radiation and Isotopes, 205: 111146. ISSN 0969-8043

Yousefi Kanani, Armin and Green, Sarah and Hou, Xiaonan and Ye, Jianqiao (2021) Hybrid and adhesively bonded joints with dissimilar adherends : a critical review. Journal of Adhesion Science and Technology, 35 (17). pp. 1821-1859. ISSN 1568-5616

Degueldre, Claude and Wilbraham, Richard and Fahy, J. and Green, Sarah (2021) Grain Secondary Recrystallisation in Advanced Gas Cooled Reactor Fuel Cladding : Characterisation and Modelling. Journal of Nuclear Materials, 543: 152633. ISSN 0022-3115

Milad, Mohamed and Green, Sarah and Ye, Jianqiao (2018) Mechanical properties of reinforced composite materials under uniaxial and planar tension loading regimes measured using a non-contact optical method. Composite Structures, 202. pp. 1145-1154. ISSN 0263-8223

Sotayo, Adeayo and Green, Sarah and Turvey, Geoffrey (2018) Development, Characterisation and Finite Element Modelling of Novel Waste Carpet Composites for Structural Applications. Journal of Cleaner Production, 183. pp. 686-697. ISSN 0959-6526

Sotayo, Adeayo and Green, Sarah and Turvey, Geoffrey (2015) Carpet recycling : a review of recycled carpets for structural composites. Environmental Technology and Innovation, 3. pp. 97-107. ISSN 2352-1864

Aboshio, Aaron and Green, Sarah and Ye, Jianqiao (2015) Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites. Composite Structures, 120. pp. 386-393. ISSN 0263-8223

Aboshio, Aaron and Green, Sarah and Ye, Jianqiao (2015) Structural performance assessment of a woven-fabric reinforced composite as applied in construction of inflatable offshore fender barrier structures. International Journal of Structural Stability and Dynamics, 15 (1): 1450036. ISSN 0219-4554

Aboshio, Aaron and Green, Sarah and Ye, Jianqiao (2014) New constitutive model for anisotropic hyperelastic biased woven fibre reinforced composite. Plastics, Rubber and Composites, 43 (7). pp. 225-234. ISSN 1465-8011

Bhattacharya, Rajarshi and Attar, Fahad G. and Green, Sarah and Port, Andrew (2012) Comparison of cement pressurisation in flanged and unflanged acetabular cups. Journal of Orthopaedic Surgery and Research, 7 (1): 5. ISSN 1749-799X

Patil, Sunit and Mahon, Andrew and Green, Sarah and McMurtry, Ian and Port, Andrew (2006) A biomechanical study comparing a raft of 3.5 mm cortical screws with 6.5 mm cancellous screws in depressed tibial plateau fractures. Knee, 13 (3). pp. 231-235. ISSN 0968-0160

Elfick, A. and Birch, M. and Green, Sarah and McCaskie, A. (2002) The influence of opsonins on cellular reaction to polyethylene wear particles. European Cells and Materials, 4 (SUPPL.). ISSN 1473-2262

Contribution in Book/Report/Proceedings

Aboshio, Aaron and Green, Sarah and Ye, Jianqiao (2014) Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites. In: Proceedings of the first international conference on mechanics of composites, Stony Brook University, New York :. UNSPECIFIED, USA.

Aboshio, Aaron and Green, Sarah and Ye, Jianqiao (2013) Dynamic Response of Inflatable Offshore Fender Barrier Structures under Impact Loading. In: Proceedings of the 14th International Conference on Civil, Structural and Environmental Engineering Computing, CC 2013 :. Civil-Comp Proceedings . Civil-Comp Press, ITA. ISBN 9781905088577

Aboshio, Aaron and Ye, Jianqiao and Green, Sarah (2013) Pneumatic fluid structure interaction of inflatable offshore fender barriers made of anisotropic hyperelastic composites. In: Proceedings of the 17th International Conference on Composite Structures, Porto, Portugal, 17-21 June 2013 :. UNSPECIFIED, PRT.

Morton, Wayne and Green, Sarah and Rennie, Allan and Abram, Thomas (2011) Surface finishing techniques for SLM manufactured stainless steel 316L components. In: Innovative Developments in Virtual and Physical Prototyping : Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, PRT, pp. 503-509. ISBN 978-0-415-68418-7

Green, Sarah and Attar, F. G. and Bhattacharya, R. and Port, A. (2007) Cement pressurisation in flanged and unflanged acetabular cups. In: Proceedings 8th EFORT Congress, Florence, Italy :. European Federation of National Associations of Orthopaedics and Traumatology, Florence, Italy, P486.

Green, Sarah and Kadakia, A. and Partington, P. F. (2007) Fixation strength of cemented Birmingham (HA coated, cementless) cups - a biomechanical study. In: Proceedings 8th EFORT congress, Florence, Italy :. European Federation of National Associations of Orthopaedics and Traumatology.

Green, Sarah and Joyce, T. and Lee, S. and Unsworth, A. (2007) In vitro wear performance of MTP prostheses evaluated on a multi-station metatarso-phalangeal joint simulator. In: Proceedings 8th EFORT Congress :. European Federation of National Associations of Orthopaedics and Traumatology, Florence, Italy, F837.

Green, Sarah and Chuter, G. S. J. and Cloke, D. J. and Mohamed, A. and Partington, P. F. (2007) Wear analysis of failed acetabular polyethylene: A comparison of analytical methods. In: Proceedings 8th EFORT Congress, Florence :. European Federation of National Associations of Orthopaedics and Traumatology, Florence, Italy.

Green, Sarah and Elfick, A. P. and Unsworth, A. (2002) AFM measurement of nanoscale topographical and material wear features. In: International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK. Institution of Mechanical Engineers, GBR, C601/032.

Green, Sarah and Gregg, P. and Liu, C. and Watkins, N. D. and McCaskie, A. W. (2002) Migration of a cemented hip joint prosthesis within a novel composite femur. In: International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK. Institution of Mechanical Engineers, GBR, C601.

Green, Sarah and Scholes, S. C. and Unsworth, A. (2002) Nanoscale wear degradation of alumina femoral head bearing surfaces assessed using an atomic force microscope. In: International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK. Institution of Mechanical Engineers, GBR, C601/036.

Green, Sarah and Elfick, A. P. and Birch, M. A. and McCaskie, A. W. (2002) On the influence of protein adsorption to phagocytosis of model polyethylene particles. In: International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK. Institution of Mechanical Engineers, GBR, L27.

Green, Sarah and Scholes, S. C. and Unsworth, A. (2002) The influence of radial clearance and wear testing on the tribology of alumina-alumina total hip prostheses. In: International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK. Institution of Mechanical Engineers, GBR, C601/037.

Green, Sarah and Liu, C. and Watkins, N. D. and Gregg, P. J. and McCaskie, A. W. (2001) Compression failure mode of two CMW bone cements. In: European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001. :. European Society for Biomaterials, London, P51.

Green, Sarah and Elfick, Alistair P. D. and Liu, C. (2001) How size affects the mobility of THR wear debris. In: European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001. :. European Society for Biomaterials, London, T41.

Green, Sarah and Elfick, A. P. and Unsworth, A. (2001) The absence of nanometre sized UHMWPE wear particles retrieved from ex-vivo tissue. In: Trans 4th Combined meeting Orthopaedic Research Societies of the USA, Europe Canada and Japan :. Orthopaedic research society, Chicago, Ill., p. 93.

Green, Sarah and Liu, C. and Watkins, N. D. and McCaskie, A. W. (2000) Comparative analysis of bone cement fracture surfaces. In: 11th International Conference on Deformation, Yield and Fracture of Polymers : 10 - 13 April 2000, Churchill College, Cambridge, UK. :. IOM communications, Cambridge, pp. 325-328. ISBN 1-86125-120-3

Green, Sarah and Grant, D.M. and Wood, J. V. (2000) Cytomcompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay. In: Processing and fabrication of advanced materials VIII : proceedings of a symposium ... September 8-10, 1999, Mandarin Hotel, Orchard Road, Singapore :. World Scientific Publishing, Singapore, pp. 141-148. ISBN 981-02-4575-0

Green, Sarah and Liu, C. and Watkins, N. D. and Gregg, P. J. and McCaskie, A. W. (2000) The dependence of recovery behaviour on mechanical properties of bone cement. In: PIMS 2000 : 9th International Conference on Polymers in Medicine & Surgery, 11 - 13 September 2000, Danube University, Krems, Austria :. IOM communications, London, p. 89. ISBN 9781861251268

Green, Sarah and Grant, D. M. and Wood, J. V. (1995) Surface performance of a Ni-Ti shape memory alloy. In: Proceedings of SMST-94 : the First International Conference on Shape Memory and Superelastic Technologies, March 7-10, 1994, Asilomar Conference Center, Pacific Grove, California :. Published under the aegis of the Organizing Committee of SMST-94, Monterey, Calif., pp. 91-96. ISBN 0-9645943-0-7

Contribution to Conference

Sotayo, Adeayo and Green, Sarah and Turvey, Geoffrey (2014) Developing novel structural composites from recycled materials. In: UNSPECIFIED.

Aboshio, Aaron and Green, Sarah and Ye, Jianqiao (2013) Application of inflatable structures in offshore security. In: Lancaster University, Faculty of Science and Technology, Christmas Conference, 2013-12-17 - 2013-12-17, Lancaster University.

Aboshio, Aaron and Ye, Jianqiao and Green, Sarah (2013) Numerical validation and dynamic study of inflatable offshore barrier structures under impact loading. In: SIMULIA Regional User Meeting, 2013-09-17 - 2013-09-19, Cheshire.

Green, Sarah and OMeara, N and Rennie, Allan (2011) Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems. In: VRAP 5 Advances in Virtual and Rapid Prototyping, 2010-09-18 - 2010-09-24.

Green, Sarah and Meyer, JRF (2010) Motivation of engineering students-considerations for programme design. In: Engineering Education 2010, 2010-07-06 - 2010-07-08.

Green, Sarah and Lee, S. and Joyce, T. and Unsworth, A. (2006) Design and development of a novel multistation MTP joint simulator for in vitro testing. In: Proceedings 20th European Society of Biomaterials Conference, 2006-08-27 - 2006-09-01.

Green, Sarah and Mahomed, A. and Cloke, D. J. and Chuter, G. S. J. and Partington, P. F. (2006) Wear evaluation of retrieved, failed uncemented UHMWPE prostheses. In: Proceedings 20th European Society of Biomaterials Conference, 2006-08-27 - 2006-09-01.

Green, Sarah and Lee, S. and Joyce, T. and Unsworth, A. (2006) Wear performance of silastic prostheses tested on a novel metatarsophalangeal joint simulator. In: Bath Biomechanics Symposium 2006, 2006-09-18.

Green, Sarah and Boampong, D. K. and Unsworth, A. (2002) Ion beam modification of Ti6Al4V alloy for TJR. In: 17th European Conference on Biomaterials, 2002-09-10 - 2002-09-14.

Green, Sarah and Liu, C. and Watkins, N. D. and McCaskie, A. W. and Gregg, P. J. (2002) Restrained creep of CMW2000 Bone Cement. In: 17th European Conference on Biomaterials, 2002-09-10 - 2002-09-14.

Green, Sarah and Elfick, A. P. and Frostick, S. P. and Unsworth, A. (2002) The morphology of UHMWPE wear debris released from shoulder prostheses. In: 17th European Conference on Biomaterials, 2002-09-10 - 2002-09-14.

Thesis

Lawson, Joe and Green, Sarah and Doulcet, Julien (2024) Carpet Recycling - Improving Reuse and Recycling of Existing Products and Service. Masters thesis, Lancaster University.

Milad, Mohamed Mousa Moraga and Green, Sarah and Ye, Jianqiao and Lambert, Colin (2022) Deformation Behaviour of Woven Fibre Elastomeric Composites. PhD thesis, Lancaster University.

Green, Sarah and Marsden, Sarah and Skogly, Sigrun (2020) Unilateral commitments to persons with disabilities of armed non-state de facto authorities that govern. Masters thesis, Lancaster University.

Goddard, Dan and Green, Sarah and Kennedy, Andrew (2019) Post-consumer waste streams and the reworking/recycling of mattresses. Masters thesis, Lancaster University.

Sotayo, Adeayo and Green, Sarah and Turvey, Geoffrey (2016) Development and characterisation of novel structural composites from recycled materials. PhD thesis, Lancaster University.