The effect of diode laser beam shape and traverse direction on the direct metal deposition process

Pinkerton, A. J. and Li, L. (2003) The effect of diode laser beam shape and traverse direction on the direct metal deposition process. In: Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America.

Full text not available from this repository.


The use of CO2 and Nd:YAG lasers for Direct Metal Deposition (DMD) has mainly focussed on using a circular laser beam. However, the use of the more energy efficient high powered diode laser (HPDL) allows multiple layer cladding to be performed with a rectangular beam, traversed at different angles to the fast axis, or with a circular beam with even intensity distribution. These factors may all have an advantage, so there is a need to investigate the effect that they have on the process and final product characteristics. This paper reports such an investigation. The dimensions, microstructure, surface finish and hardness of multiple layer walls produced using a 1.5 kW HPDL and 316L stainless steel powder produced using rectangular and circular beams under a range of conditions are compared. Results show little difference in the microstructural and physical properties due to beam shape or traverse direction, but track dimensions are dependent on beam geometry. Wall width is particularly dependent on beam size orthogonal to the traverse direction. Fibre coupling seems to provide a benefit if even thin wall dimensions are required, while using the rectangular beam provides advantages for bulk material addition.

Item Type:
Contribution in Book/Report/Proceedings
Uncontrolled Keywords:
ID Code:
Deposited By:
Deposited On:
21 Nov 2012 09:09
Last Modified:
19 Oct 2023 10:21