Improved thermophysical characteristics of a new class of ionic liquid + diethylene glycol/Al2O3 + CuO based ionanofluid as a coolant media for hybrid PV/T system

Das, L. and Aslfattahi, N. and Habib, K. and Saidur, R. and Irshad, K. and Yahya, S.M. and Kadirgama, K. (2022) Improved thermophysical characteristics of a new class of ionic liquid + diethylene glycol/Al2O3 + CuO based ionanofluid as a coolant media for hybrid PV/T system. Thermal Science and Engineering Progress, 36: 101518.

[thumbnail of Likhan_Ionic_Authors_version]

Text (Likhan_Ionic_Authors_version)
Likhan_Ionic_Authors_version.pdf - Accepted Version
Available under License Creative Commons Attribution-NonCommercial-NoDerivs.
Download (2MB)

Abstract

The purpose of this experimental research is to develop a new class of nanofluid as a replacement of conventional water based nanofluid for medium temperature range as PV/T coolant application. For the first time, hybridized Al2O3 + CuO nanoparticles were dispersed into the binary mixture of ionic liquid (IL) and diethylene glycol (DEG) without the addition of any stabilizing agents or surfactants. The formulated Ionanofluid posed excellent dispersion stability together with better thermal stability compared to water-based nanofluid, as evidenced from thermogravimetric analysis. The experimental thermal conductivity assessment showed a maximum of 41.8 % enhancement together with a 31 % penalty in pressure drop at 0.15 wt% concentration. A hybrid PVT system is constructed to numerically examine the effect of Ionanofluid as an active cooling medium under the COMSOL Multiphysics environment. Ionanofluids as coolants in a PVT panel showed a maximum of 69 % thermal efficiency at 0.15 wt% Al2O3 + CuO, higher than 63 % (0.10 wt% Al2O3 + CuO), 58 % (0.05 wt% Al2O3 + CuO), and 56 % (pure IL + DEG). The PV panel temperature was reduced from 65 to 40 °C when IL + DEG was replaced with 0.15 wt% Al2O3 + CuO. At the same concentrations, an electrical efficiency of nearly 12.7 % was observed, representing a 29.91 % improvement over IL + DEG at a flow rate of 4LPM. The formulated Ionanofluid performed thermally better than water but somewhat lower than water-based nanofluids like MWCNT/Water. Nevertheless, Ionanofluid's electrical efficiency was better than MWCNT/Water. Ionanofluid can be a viable alternative to water-based nanofluids for medium-temperature-based coolant applications.

Item Type:

Journal Article

Journal or Publication Title:

Thermal Science and Engineering Progress

Additional Information:

This is the author’s version of a work that was accepted for publication in Thermal Science and Engineering Progress. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Thermal Science and Engineering Progress, 36, 2022 DOI: 10.1016/j.tsep.2022.101518

Subjects:

?? electrical efficiencyionic liquidpvtthermal efficiency ??

Departments:

Faculty of Science and Technology > Engineering

ID Code:

178811

Deposited By:

ep_importer_pure

Deposited On:

08 Nov 2022 14:35

Refereed?:

Yes