Muxworthy, A.R. and Lam, C. and Green, D. and Cowan, A. and Maher, B.A. and Gonet, T. (2022) Magnetic characterisation of London's airborne nanoparticulate matter. Atmospheric Environment, 287: 119292. ISSN 1352-2310
Full text not available from this repository.Abstract
Iron-bearing particulate matter produced by vehicle emissions is known to be toxic. To better quantify potential health risks, we have conducted the first magnetic study of a time-series of London's inhalable particulate matter (<10 μm, PM 10), captured by three monitoring stations in central London (Marylebone Road, Earl's Court Road and Oxford Street) through 2010 and 2012. We conducted room-temperature analysis on all the samples, and a limited number of samples were analysed at both high and low temperatures. The high-temperature measurements identified magnetite as the dominant magnetic phase. The low-temperature measurements revealed high numbers of nanoparticles, which, assuming magnetite, are in the grain-size range 1–4 nm. It is estimated that as much as ∼40% of the total magnetic signal at 10 K is from particles <4 nm, that are magnetically ‘invisible’ at room-temperature and are being routinely under-estimated in room temperature-based magnetic studies. From the low-temperature measurements, the total concentration of magnetite was estimated at ∼7.5%, significantly higher than previously reported. The room-temperature magnetic data were compared with other pollution data, e.g., NO X and PM 10, and meteorological data. Mass-dependent terms like the saturation magnetisation were found to display a strong correlation with NO X and PM 10, indicating a common source for these pollutants, i.e., vehicle emissions. Magnetic coercivity measurements, which are independent of abundance, and provide information on grain-size, were consistent across all three sampling localities, again suggesting a major dominant source. Relatively small variations in coercivity were correlated with meteorological events, e.g., temperature and precipitation, suggesting preferential removal of larger airborne grains, i.e., >50 nm.