A model for predicting smoke back-layering length in tunnel fires with the combination of longitudinal ventilation and point extraction ventilation in the roof

Wang, Junheng and Yuan, Jianping and Fang, Zheng and Tang, Zhi and Qian, Peng and Ye, Jianqiao (2018) A model for predicting smoke back-layering length in tunnel fires with the combination of longitudinal ventilation and point extraction ventilation in the roof. Tunnelling and Underground Space Technology, 80. pp. 16-25. ISSN 0886-7798

[img]
Preview
PDF (A model for predicting smoke back-layering length in tunnel fires with the combination of longitudinal ventiltion and point extraction ventilation in the roof(revised))
A_model_for_predicting_smoke_back_layering_length_in_tunnel_fires_with_the_combination_of_longitudinal_ventiltion_and_point_extraction_ventilation_in_the_roof_revised_.pdf - Accepted Version
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (869kB)

Abstract

An analytical model is developed for quantifying the fire smoke back-layering length in a tunnel with a combination of longitudinal ventilation and point extraction ventilation in the roof. The distance of smoke vent to fire source is incorporated as well as mass flow rate during the whole smoke flow process according to the mass conservation principle. The model input quantities are the heat release rate of the fire source, the longitudinal velocity, the exhaust velocity, the width and the height of the tunnel, the distance of the smoke vent to the fire source and the area of the smoke vent. The quality of the model predictions is illustrated for a range of experimental conditions. After that, extensive model predictions on the back-layering length are presented to show its trends by varying the velocity of the longitudinal ventilation, the exhaust velocity and the position of the smoke vent in the roof. Discussions are given at last. It is highlighted that shortening the distance between the smoke vent and the fire source benefits shortening the back-layering length, and this phenomenon is more pronounced for higher exhaust velocity.

Item Type:
Journal Article
Journal or Publication Title:
Tunnelling and Underground Space Technology
Additional Information:
This is the author’s version of a work that was accepted for publication in Tunnelling and Underground Space Technology. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Tunnelling and Underground Space Technology, 80, 2018 DOI: 10.1016/j.tust.2018.05.022
Uncontrolled Keywords:
/dk/atira/pure/subjectarea/asjc/1900/1909
Subjects:
ID Code:
125959
Deposited By:
Deposited On:
21 Jun 2018 15:18
Refereed?:
Yes
Published?:
Published
Last Modified:
01 Oct 2020 02:38