Lancaster EPrints

Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Number of items at this level: 1187.

Article

Abujnah, N. and Letizia, R. and Obayya, S. S. A. (2011) Design considerations of microcavity ring resonators. IET Optoelectronics, 5 (4). pp. 158-164. ISSN 1751-8768

Adamopoulos, George (2003) The electrochemical reactivity of amorphous hydrogenated carbon nitrides for varying nitrogen contents: the role of the substrate. Diamond and Related Materials, 12 (3-7). pp. 613-617. ISSN 0925-9635

Adamopoulos, George and Bashir, Aneeqa and Gillin, William P. and Georgakopoulos, Stamatis and Shkunov, Maxim and Baklar, Mohamed A. and Stingelin, Natalie and Bradley, Donal D. C. and Anthopoulos, Thomas D. (2011) Structural and Electrical Characterization of ZnO Films Grown by Spray Pyrolysis and Their Application in Thin-Film Transistors. Advanced Functional Materials, 21 (3). pp. 525-531. ISSN 1616-301X

Adamopoulos, George and Bashir, Aneeqa and Thomas, Stuart and Gillin, William P. and Georgakopoulos, Stamatis and Shkunov, Maxim and Baklar, Mohamed A. and Stingelin, Natalie and Maher, Robert C. and Cohen, Lesley F. and Bradley, Donal D. C. and Anthopoulos, Thomas D. (2010) Spray-Deposited Li-Doped ZnO Transistors with Electron Mobility Exceeding 50 cm(2)/Vs. Advanced Materials, 22 (42). pp. 4764-4769. ISSN 0935-9648

Adamopoulos, George and Bashir, Aneeqa and Wöbkenberg, Paul H. and Bradley, Donal D. C. and Anthopoulos, Thomas D. (2009) Electronic properties of ZnO field-effect transistors fabricated by spray pyrolysis in ambient air. Applied Physics Letters, 95 (13). ISSN 0003-6951

Adamopoulos, George and Gilkes, K.W.R and Robertson, J and Conway, N.M.J and Kleinsorge, B.Y and Buckley, A and Batchelder, D.N (1999) Ultraviolet Raman characterisation of diamond-like carbon films. Diamond and Related Materials, 8 (2-5). pp. 541-544. ISSN 0925-9635

Adamopoulos, George and Godet, C. and Drévillon, B. and Saito, Y. and Batchelder, D.N. and Grosman, A. and Ortega, C. (2003) ECR deposition of hydrogenated diamond-like amorphous carbon films using acetylene-oxygen plasmas. Diamond and Related Materials, 12 (3-7). pp. 983-987. ISSN 0925-9635

Adamopoulos, George and Godet, C. and Zorba, T. and Paraskevopoulos, K. M. and Ballutaud, D. (2004) Electron cyclotron resonance deposition, structure, and properties of oxygen incorporated hydrogenated diamondlike amorphous carbon films. Journal of Applied Physics, 96 (10). pp. 5456-5461. ISSN 0021-8979

Adamopoulos, George and Godet, Christian and Robertson, John and Morrison, Neil (2004) Hydrogen content estimation of hydrogenated amorphous carbon by visible Raman spectroscopy. Journal of Applied Physics, 96 (11). pp. 6348-6352. ISSN 0021-8979

Adamopoulos, George and Heiser, T. and Giovanella, U. and Ould-Saad, S. and van de Wetering, K.I. and Brochon, C. and Zorba, T. and Paraskevopoulos, K.M. and Hadziioannou, G. (2006) Electronic transport properties aspects and structure of polymer-fullerene based organic semiconductors for photovoltaic devices. Thin Solid Films, 511-51. 371–376. ISSN 0040-6090

Adamopoulos, George and Thomas, Stuart and Bradley, Donal D. C. and McLachlan, Martyn A. and Anthopoulos, Thomas D. (2011) Low-voltage ZnO thin-film transistors based on Y2O3 and Al2O3 high-k dielectrics deposited by spray pyrolysis in air. Applied Physics Letters, 98 (12). -. ISSN 0003-6951

Adamopoulos, George and Thomas, Stuart and Woebkenberg, Paul H. and Bradley, Donal D. C. and McLachlan, Martyn A. and Anthopoulos, Thomas D. (2011) High-Mobility Low-Voltage ZnO and Li-Doped ZnO Transistors Based on ZrO2 High-k Dielectric Grown by Spray Pyrolysis in Ambient Air. Advanced Materials, 23 (16). pp. 1894-1898. ISSN 0935-9648

Adams, J. C. and Mellor, M. and Joyce, Malcolm J. (2010) Depth Determination of Buried Caesium-137 and Cobalt-60 Sources Using Scatter Peak Data. IEEE Transactions on Nuclear Science, 57 (5). pp. 2752-2757. ISSN 0018-9499

Adams, Jamie and Joyce, Malcolm and Mellor, M. (2012) Depth profiling 137Cs and 60Co non-intrusively for a suite of industrial shielding materials and at depths beyond 50mm. Applied Radiation and Isotopes, 70 (7). 1150–1153. ISSN 0969-8043

Adelson, Ronald (1997) Frequency estimation from few measurements. Digital Signal Processing, 7 (1). pp. 47-54. ISSN 1051-2004

Adelson, Ronald and Turner, A. C. (1996) Spectrum analysis, aliasing and the perception of musical tones. Perception, 25 (5). pp. 609-617. ISSN 1468-4233

Aggidis, George and Howard, D. C. and Rothschild, R. and Widden, Martin (2006) Maximising the benefits of hydropower by developing the North-West England hydro resource model. Proceedings of the International Hydro Power & Dams Construction Journal, 7 (1).

Aggidis, George A. (2007) Renewable energy support, activities and developments in the UK. Electrical Engineering Research Report. ISSN 1126-5310

Aggidis, George A. and Bradshaw, A. and McCabe, A. and Meadowcroft, J. (2006) Developments in the design of the PS Frog MK5 Wave Energy Converter. Renewable Energy, 31 (2). pp. 141-151. ISSN 0960-1481

Aggidis, George A. and Howard, David C. and Wright, Simon M. and Scott, Richard (2006) Energy source or sink? : The role of Uplands in meeting our energy targets. The International Journal of Biodiversity Science and Management, 2 (3). pp. 196-199. ISSN 1745-1604

Aggidis, George A. and Luchinskaya, E. and Rothschild, R. and Howard, D. C. (2010) The costs of small-scale hydro power production: Impact on the development of existing potential. Renewable Energy, 35 (12). pp. 2632-2638.

Aggidis, George A. and McCabe, A and Widden, M and Yavuz, H (2006) Calculation of the performance of resonant wave energy converters in real seas. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 220 (3). pp. 117-128. ISSN 1475-0902

Ahmad, M. and Nanda, R. and Bajwa, A.S. and Candal-Couto, J. and Green, S. and Hui, A.C. (2007) Biomechanical testing of the locking compression plate: When does the distance between bone and implant significantly reduce construct stability? Injury, 38 (3). pp. 358-364. ISSN 0020-1383

Ahsan, M. Naveed and Bradley, Robert and Pinkerton, Andrew J. (2011) Microcomputed tomography analysis of intralayer porosity generation in laser direct metal deposition and its causes. Journal of Laser Applications, 23 (2). -. ISSN 1042-346X

Ahsan, M. Naveed and Paul, Christ P. and Kukreja, L. M. and Pinkerton, Andrew J. (2011) Porous structures fabrication by continuous and pulsed laser metal deposition for biomedical applications; modelling and experimental investigation. Journal of Materials Processing Technology, 211 (4). pp. 602-609. ISSN 0924-0136

Ahsan, M. Naveed and Pinkerton, Andrew J. (2011) An analytical-numerical model of laser direct metal deposition track and microstructure formation. Modelling and Simulation in Materials Science and Engineering, 19 (5). -. ISSN 0965-0393

Ahsan, M. Naveed and Pinkerton, Andrew J. and Moat, Richard J. and Shackleton, Judith (2011) A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti-6Al-4V powders. Materials Science and Engineering: A, 528 (25-26). pp. 7648-7657. ISSN 0921-5093

Al-Gayem, Qais and Honguan, Liu and Richardson, Andrew and Burd, Nick (2011) Test strategies for electrode degradation in bio-fluidic microsystems. Journal of Electronic Testing, 27 (1). pp. 57-68. ISSN 0923-8174

Alemohammad, H. and Toyserkani, E. and Pinkerton, A. J. (2008) Femtosecond laser micromachining of fibre Bragg gratings for simultaneous measurement of temperature and concentration of liquids. Journal of Physics D: Applied Physics, 41 (18). -. ISSN 0022-3727

Ambattu, P. K. and Burt, G. and Khan, V. and Jones, R. M. and Dexter, A. C. and Dolgashev, V. (2011) Analysis and control of wakefields in X-band crab cavities for Compact Linear Collider. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 657 (1). pp. 27-37.

Ambattu, Praveen and Burt, Graeme and Grudiev, A. and Dolgashev, V. and Dexter, Amos (2013) Multipole components and their minimization in deflecting cavities with standard type couplers. Physical Review Special Topics: Accelerators and Beams, 16 (6). ISSN 1098-4402

Ambattu, Praveen and Hamsakutty, V and Yohannan, J and Mathew, KT (2006) A strip loaded dielectric resonator antenna for circular polarisation. Microwave and Optical Technology Letters, 48 (7). pp. 1354-1356. ISSN 0895-2477

Anderson, D. C. (1992) A project-based heat transfer course. International Journal of Mechanical Engineering Education, 20 (2). ISSN 2050-4586

Andrieux, Fabrice P. L. and Boxall, Colin and Taylor, Robin J. (2008) Acetohydroxamatoiron(III) complexes : thermodynamics of formation and temperature dependent speciation. Journal of Solution Chemistry, 37 (11). pp. 1511-1527. ISSN 0095-9782

Andrieux, Fabrice Pierre Louis and Boxall, C. and May, I. and Taylor, R. J. (2008) The hydrolysis of hydroxamic acid complexants in the presence of non-oxidizing metal ions 2: Neptunium (IV) ions. Journal of Solution Chemistry, 37 (2). pp. 215-232. ISSN 0095-9782

Andrieux, Fabrice Pierre Louis and Boxall, C. and O'Hare, D. (2006) The micro-optical ring electrode Part 2 : theory for the transport limited, steady-state photocurrent. Journal of Electroanalytical Chemistry, 589 (2). pp. 177-186. ISSN 0022-0728

Andrieux, Fabrice Pierre Louis and Boxall, C. and Taylor, R. J. (2007) The hydrolysis of hydroxamic acid complexants in the presence of non-oxidizing metal ions 1: Ferric ions. Journal of Solution Chemistry, 36 (10). pp. 1201-1217. ISSN 0095-9782

Appleby, Michaela and Lambert, Christopher and Rennie, Allan and Buckley, Adam (2011) An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs). International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME), 1 (2). pp. 1-18. ISSN 2156-1680

Aspinall, M. D. and D’Mellow, B. and Mackin, R. O. and Joyce, M. J. and Hawkes, N. P. and Thomas, D. J. and Jarrah, Z. and Peyton, A. J. and Nolan, P. J. and Boston, A. J. (2007) Verification of the digital discrimination of neutrons and γ rays using pulse gradient analysis by digital measurement of time of flight. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 583 (2-3). pp. 432-438.

Aspinall, M. D. and D’Mellow, B. and Mackin, R. O. and Joyce, M. J. and Jarrah, Z. and Peyton, A. J. (2007) The empirical characterization of organic liquid scintillation detectors by the normalized average of digitized pulse shapes. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 578 (1). pp. 261-266. ISSN 0168-9002

Aspinall, M. D. and Joyce, M. J. and Mackin, R. O. and Jarrah, Z. and Boston, A. J. and Nolan, P. J. and Peyton, A. J. and Hawkes, N. P. (2009) Sample-interpolation timing: an optimized technique for the digital measurement of time of flight for γ rays and neutrons at relatively low sampling rates. Measurement Science and Technology, 20 (1). ISSN 0957-0233

Aspinall,, M. D. and Joyce, Malcolm J. and Mackin,, R. O. and Jarrah, Z. and Peyton, A. J. (2008) Digital processing of signals arising from organic liquid scintillators for applications in the mixed-field assessment of nuclear threats. Proceedings of SPIE, 7119 (71190G). ISSN 0277-786X

Attallah, K. M. Z. and Ye, J. Q. and Sheng, H. Y. (2007) Three-dimensional finite strip analysis of laminated panels. Computers and Structures, 85 (23-24). pp. 1769-1781. ISSN 0045-7949

BARTOLUCCI, G and GIANNINI, F and PAOLONI, C (1989) Beam forming networks for active antenna systems. Space Communications, 6 (5). pp. 397-407. ISSN 0924-8625

BARTOLUCCI, G and GIANNINI, F and PAOLONI, C (1994) Equivalent circuit model for microstrip multiport radial dividers. IEE Proceedings - Microwaves, Antennas, and Propagation, 141 (4). pp. 333-336. ISSN 1350-2417

Baker, Nick J. and Mueller, M. and Ran, L. and Tavner, P. (2007) Development of Linear test rig for electrical Power take off from waves. Journal of Marine Engineering and Technology, A10. pp. 3-15. ISSN 1476-1548

Bandala Sánchez, Manuel and Joyce, Malcolm (2012) Photon radiation testing of commercially available off-the-shelf microcontroller devices. IEICE Electronics Express, 9 (5). pp. 397-402.

Bandala Sánchez, Manuel and Joyce, Malcolm J. (2008) Tracking of internal organ motion with a six degree-of-freedom MEMS sensor: concept and simulation study. Measurement Science and Technology, 19 (2). 024006. ISSN 0957-0233

Bandala Sánchez, Manuel and Joyce, Malcolm J. (2007) Wireless inertial sensor for tumour motion tracking. Journal of Physics: Conference Series, 76. 012036. ISSN 1742-6588

Bashir, Aneeqa and Woebkenberg, Paul and Smith, Jeremy and Ball, James and Adamopoulos, George and Bradley, Donal and Anthopoulos, Thomas (2009) High-Performance Zinc Oxide Transistors and Circuits Fabricated by Spray Pyrolysis in Ambient Atmosphere. Advanced Materials, 21. pp. 2226-2231. ISSN 0935-9648

Bennett, D. and Burge, S. E. and Bradshaw, A. (1999) Design of a controller for a highly coupled VSTOL aircraft. Transactions of the Institute of Measurement and Control, 21 (2-3). pp. 63-75. ISSN 1477-0369

Benson, C. and Joyce, Malcolm J. and Winsby, A. and Silvie, J. (2002) Monte-Carlo calculation of the response functions for two prototype cosmic neutron metrology instruments. Journal of Nuclear Science and Technology, S2 (2). pp. 1361-1364. ISSN 0022-3131

Benson, Chris and Price, Robert A. and Silvie, Jon and Jaksic, Aleksandar and Joyce, Malcolm J. (2004) Radiation-induced statistical uncertainty in the threshold voltage measurement of MOSFET dosimeters. Physics in Medicine and Biology, 49 (14). pp. 3145-3159. ISSN 1361-6560

Benson, T. and Hu, B and Vukovic, A. and Sewell, P. (2004) What is the future for beam propagation methods? Proceedings of SPIE, 5579. ISSN 0277-786X

Bhaskar, Harish and Mihaylova, Lyudmila (2011) Combined data association and evolving particle filter for tracking of multiple articulated objects. EURASIP Journal on Image and Video Processing, 2011. pp. 1-12. ISSN 1687-5176

Bhattacharya, Rajarshi and Attar, Fahad G. and Green, Sarah and Port, Andrew (2012) Comparison of cement pressurisation in flanged and unflanged acetabular cups. Journal of Orthopaedic Surgery and Research, 7 (1). ISSN 1749-799X

Bienstman, P and Selleri, S and Rosa, L and Uranus, H.P. and Hopman, W.C.L. and Costa, R. and Melloni, A. and Andreani, L.C. and Hugonin, J.P. and Lalanne, P. and Pinto, Domenico and Obayya, Salah and Dems, M. and Panajotov, K. (2006) Modelling leaky photonic wires: A mode solver comparison. Optical and Quantum Electronics, 38 (9-11). pp. 731-759. ISSN 1572-817X

Binns, R. and Lyons, A. R. A. and Peyton, A. J. and Pritchard, W. D. N. (2000) Imaging molten steel flow profiles. Proceedings of SPIE, 4188. pp. 248-293. ISSN 1996-756X

Binns, R. and Lyons, A. R. A. and Peyton, A. J. and Pritchard, W. D. N. (2001) Imaging molten steel flow profiles. Measurement Science and Technology, 12 (8). pp. 1132-1138. ISSN 0957-0233

Bissessur, Y. and Peyton, A. J. (2001) Image reconstruction for electromagnetic inductance tomography employing a parameterized finite-element-based forward model. Proceedings of SPIE, 4188. pp. 261-272. ISSN 1996-756X

Boampong, D. K. and Green, S. M. and Unsworth, A. (2003) N+ ion implantation of Ti6Al4V alloy and UHMWPE for total joint replacement application. Journal of Applied Biomaterials and Biomechanics, 1. pp. 164-171. ISSN 1722-6899

Bocking, C. and Jacobson, D.M and Rennie, A.E.W (2002) Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming. Microelectronics International, 19 (1). pp. 30-32.

Bonner, T.J. and Green, S.M. and McMurty, I.A. (2012) A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES. Journal of Bone and Joint Surgery, British Volume, 94-B (SUPP X). p. 20. ISSN 0301-620X

Boxall, Colin and Wilbraham, Richard and Taylor, Robin J. and Woodbury, Simon (2012) Surface Decontamination by Photocatalysis. MRS Online Proceedings Library, 1383. ISSN 1946-4274

Boxall, Colin and Woodhouse, Becky and Wilbraham, Richard (2012) Fixed Contamination on Steel Surfaces: First Use of Quartz Crystal Microgravimetry to Measure Oxide Growth on Process Steels Under Conditions Typical of Nuclear Reprocessing. MRS Online Proceedings Library, 1383. ISSN 1946-4274

Bradley, D. A. and Seward, D. W. (1998) The development, control and operation of an autonomous robotic excavator. Journal of Intelligent and Robotic Systems, 21 (1). pp. 73-97. ISSN 0921-0296

Bradley, D. A. and Walters, R. M. and Dorey, A. P. (2000) A conceptual study for a computer-based tool to support electronics design in a mechatronic environment. Microprocessors and Microsystems, 24 (2). pp. 51-61. ISSN 1872-9436

Bradshaw, Alan and Shao, Jindi (1996) Swing-up control of inverted pendulum systems. Robotica, 14 (4). pp. 397-405. ISSN 0263-5747

Bratt, Adrian and Olbrich, T. and Dorey, A. P. (1994) Class AB cascode current memory cell. Electronics Letters, 30 (22). pp. 1821-1823. ISSN 1350-911X

Bromley, Michael and Boxall, Colin (2012) Photocatalytically Initiated Electroless Deposition of macroporous metal films onto insulating substrates. Electrochemistry Communications, 23. pp. 87-89. ISSN 1388-2481

Bromley, Michael and Boxall, Colin (2012) The nanoporous metallisation of insulating substrates through Photocatalytically Initiated Electroless Deposition (PIED). MRS Online Proceedings Library, 1409. ISSN 0272-9172

Burbidge, M. and Richardson, Andrew M. D. (2001) Simple digital only test approach for embedded charge-pump phase-locked loops. Electronics Letters, 37 (22). pp. 1318-1319. ISSN 0013-5194

Burbidge, Martin J. and Lechner, A. and Richardson, Andrew M. D. (2003) Evaluation and detection of deterministic jitter causes in CP-PLLs due to macro level faults and pre-detection using simple methods. Proceedings of the 9th IEEE international mixed signal test workshop (IMSTW03). pp. 157-164.

Burbidge, Martin J. and Poullet, Frederic and Tijou, Jim and Richardson, Andrew M. D. (2003) Investigations for minimum invasion digital only built in ‘ramp’ based test techniques for charge pump PLLs. Journal of Electronic Testing, 19 (4). pp. 481-490. ISSN 0923-8174

Burbidge, Martin J. and Tijou, Jim and Richardson, Andrew M. D. (2003) Investigations of automatic built in transient step response monitoring for embedded second order charge pump phase locked loop frequency synthesizers. Journal of Electronic Testing. ISSN 0923-8174

Burbidge, Martin John (2004) Phase locked loop system design and measurement tutorial consisting of physical hardware and co-simulation environment. International Journal of Electrical Engineering Education, 41 (4). pp. 358-374. ISSN 0020-7209

Burt, G. and Jones, R. M. and Dexter, A. C. (2007) Analysis of Damping Requirements for Dipole Wake-Fields in RF Crab. IEEE Transactions on Nuclear Science, 54 (5). ISSN 0018-9499

Burt, G. and Samsonov, S. V. and Phelps, A. D. R. and Bratman, V. L. and Ronald, K. and Denisov, G. G. and He, W. and Young, A. R. and Cross, A. W. and Knopolev, I. (2004) Microwave pulse compression using helically corrugated waveguides. Conference Record - IEEE International Conference on Plasma Science, 33 (2). ISSN 0730-9244

Burt, G. and Samsonov, S. V. and Ronald, K. and Denisov, G. G. and Young, A. R. and Bratman, V. L. and Phelps, A. D. R. and Cross, A. W. and Knoplev, I. and He, W. and Thomson, J. and Whyte, C. G. (2004) Dispersion of helically corrugated waveguides: Analytical, numerical and experimental study. Physical Review E, 70 (4). ISSN 1539-3755

Burt, Graeme and Dexter, Amos (2011) Prediction of multipactor in the iris region of rf deflecting mode cavities. Physical Review Special Topics: Accelerators and Beams, 14 (12). ISSN 1098-4402

Burt, Graeme and Latina, A. and Schulte, D. and Dexter, Amos C. and McIntosh, P. A. (2008) Anticrab cavities for the removal of spurious vertical bunch rotations caused by crab cavities. Physical Review Special Topics: Accelerators and Beams, 11 (9). ISSN 1098-4402

Cao, D. and Rakheja, S. and Su, C-Y (2008) Pitch plane analysis of a twin-gas-chamber strut suspension. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222 (8). pp. 1313-1335. ISSN 0954-4070

Cao, Dongpu and Khajepour, Amir and Song, Xubin (2011) Modelling generalisation and power dissipation of flexible-wheel suspension concept for planetary surface vehicles. Vehicle System Dynamics, 49 (8). pp. 1299-1320. ISSN 0042-3114

Cao, Dongpu and Rakheja, Subhash and Su, Chun-Yi (2010) Roll- and pitch-plane coupled hydro-pneumatic suspension. Part I Feasibility analysis and suspension properties. Vehicle System Dynamics, 48 (3). pp. 361-386. ISSN 0042-3114

Cao, Dongpu and Rakheja, Subhash and Su, Chun-Yi (2010) Roll- and pitch-plane-coupled hydro-pneumatic suspension. Part 2 dynamic response analyses. Vehicle System Dynamics, 48 (4). pp. 507-528. ISSN 0042-3114

Cao, Dongpu and Rakheja, Subhash and Wang, Zhanqi (2011) Urban bus driver ride and road-friendliness. Part II: subjective suspension damping tuning and objective optimization. International Journal of Vehicle Design, 57 (4). pp. 333-358. ISSN 0143-3369

Cao, Dongpu and Song, Xubin and Ahmadian, Mehdi (2011) Editors' perspectives: road vehicle suspension design, dynamics, and control. Vehicle System Dynamics, 49 (1-2). pp. 3-28. ISSN 0042-3114

Carrott, M. J. and Fox, O. D. and LeGurun, G. and JONES, C J and Mason, C. and Taylor, Robin and Andrieux, Fabrice and Boxall, Colin (2008) Oxidation-reduction reactions of simple hydroxamic acids and plutonium(IV) ions in nitric acid. Radiochimica Acta, 96 (6). pp. 333-343. ISSN 0033-8230

Carter, Richard G. (2001) Accuracy of microwave cavity perturbation measurements. IEEE Transactions on Microwave Theory and Techniques, 49 (5). pp. 918-923. ISSN 0018-9480

Carter, Richard G. (1984) Engineering curriculum design. IEE Proceedings - Part A: Physical Science, Measurements and Instrumentation, Management and Education, Reviews, 131 (9). pp. 678-683. ISSN 0143-702X

Cattley, R. and Widden, Martin B. and Aggidis, George A. (2005) Low Head Hydropower Developments. Proceedings of the world renewable energy congress.

Celik, Kursat and Lupeanu, Mihaela and Rennie, Allan and Neagu, Corneliu and Akinci, Ibrahim (2013) Product re-design using advanced engineering applications and function analysis:a case study for greenhouse clips. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 35 (3). pp. 305-318. ISSN 1678-5878

Chandy, R. P. and Morgan, R. and Scully, P. J. (1999) Optical methods of sensing. Transactions of the Institute of Measurement and Control. ISSN 1477-0369

Chandy, R. P. and Scully, P. J. (1999) A novel method of measuring biofilms in cooling towers using an optical fibre sensor. Optics Letters. ISSN 0146-9592

Chandy, R. P. and Scully, P. J. and Morgan, R. (1999) Measurement of fluid speed and direction using a fibre optic drag force flow sensor. IEEE Transactions on Instrumentation and Measurement, 48. ISSN 0018-9456

Chen, Hui-Chi and Pinkerton, Andrew J. and Li, Lin (2011) Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications. International Journal of Advanced Manufacturing Technology, 52 (9-12). pp. 977-987. ISSN 0268-3768

Chen, Hui-Chi and Pinkerton, Andrew J. and Li, Lin and Liu, Zhu and Mistry, Anil T. (2011) Gap-free fibre laser welding of Zn-coated steel on Al alloy for light-weight automotive applications. Materials and Design, 32 (2). pp. 495-504. ISSN 0261-3069

Chotai, Arun and Taylor, C. James and Young, Peter C. (2001) Design and application of PIP controllers: robust control of the IFAC ’93 benchmark. Transactions of the Institute of Measurement and Control, 23 (3). pp. 183-200. ISSN 1477-0369

Chuter, G. S. J. and Cloke, D. J. and Mahomed, A. and Partington, P. F. and Green, S. M. (2007) Wear analysis of failed acetabular polyethylene:a comparison of analytical methods. Journal of Bone and Joint Surgery, British Volume, 89B (2). pp. 273-279. ISSN 0301-620X

Chuter, Graham S. J. and Cloke, David J. and Green, Sarah M. and Partington, Paul F. (2006) MATERIALS TESTING AND VOLUMETRIC ANALYSIS OF EXPLANTED ABG I CUP INSERTS. Journal of Bone and Joint Surgery, British Volume, 88-B (SUPP I). p. 246.

Colling, Bethany R and Monk, Stephen David (2012) Development of fusion blanket technology for the DEMO reactor. Applied Radiation and Isotopes, 70 (7). pp. 1370-1372. ISSN 0969-8043

Cooper, C. and Turvey, G. J. (1995) Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material. Composite Structures, 32 (1-4). pp. 217-226.

Crolla, David and Cao, Dongpu (2012) The impact of hybrid and electric powertrains on vehicle dynamics, control systems and energy regeneration. Vehicle System Dynamics, 50 (Supp. ). pp. 95-109. ISSN 0042-3114

D'Agostino, S and Emma, F and Paoloni, C (1998) Accurate analysis of helix slow-wave structures. IEEE Transactions on Electron Devices, 45 (7). pp. 1605-1613. ISSN 0018-9383

D'Agostino, S and Emma, F and Paoloni, C (1999) On the TWT based on a helix slow-wave structure sustained by rectangular dielectric rods. Microwave and Optical Technology Letters, 20 (3). pp. 177-179. ISSN 0895-2477

D'Agostino, S and Emma, F and Paoloni, C (2000) Sensitivity analysis of TWT's small signal gain based on the effect of rod shape and dimensions. IEEE Transactions on Electron Devices, 47 (7). pp. 1457-1462. ISSN 0018-9383

D'Agostino, S and Paoloni, C (2000) Analysis of high-efficiency multistage depressed collectors based on the 3-D finite-element method. Microwave and Optical Technology Letters, 27 (4). pp. 275-278. ISSN 0895-2477

D'Agostino, S and Paoloni, C (2004) Cathode voltage adjustment to compensate helix pitch tolerance in TWTs. Electronics Letters, 40 (1). pp. 36-38. ISSN 0013-5194

D'Agostino, S and Paoloni, C (2000) Effect of mechanical tolerance of T-shaped rods in a TWT based on a helix slow-wave structure. Microwave and Optical Technology Letters, 25 (6). pp. 393-395. ISSN 0895-2477

D'Agostino, S and Paoloni, C (1998) Fast prediction and optimization of yield in gallium arsenide large-signal MMICs. International Journal of RF and Microwave Computer-Aided Engineering, 8 (1). pp. 68-76. ISSN 1096-4290

D'Agostino, S and Paoloni, C (2001) Helix wire tolerances in TWT small-signal gain prediction. Microwave and Optical Technology Letters, 29 (3). pp. 208-209. ISSN 0895-2477

D'Agostino, S and Paoloni, C (2001) Impact of process parameters in 40 GHz traveling-wave amplifiers. Microwave and Optical Technology Letters, 31 (6). pp. 421-423. ISSN 0895-2477

D'Agostino, S and Paoloni, C (2002) On the influence of electron-beam parameters on TWT small-signal gain. Microwave and Optical Technology Letters, 34 (6). pp. 433-434. ISSN 0895-2477

D'Agostino, S and Paoloni, C (2000) A finite-element 3-D method for the design of TWT collectors. Microwave and Optical Technology Letters, 26 (2). pp. 119-122. ISSN 0895-2477

D'Agostino, S and Paoloni, C (1998) An optimization procedure for MMIC large-signal amplifiers. Microwave and Optical Technology Letters, 19 (6). pp. 386-388. ISSN 0895-2477

D'Agostino, S and Paoloni, C (2002) A study on helix pitch tolerance impact on TWT small-signal gain. IEEE Electron Device Letters, 23 (12). pp. 746-748. ISSN 0741-3106

D'Mellow, Bob and Joyce, Malcolm J. (2004) Calibration of gas-filled proton recoil detectors. Radiation Physics and Chemistry, 71 (3-4). pp. 727-729. ISSN 0969-806X

D'Mellow, Bob and Thomas, David J. and Joyce, Malcolm J. and Kolkowski, Peter and Roberts, Neil J. and Monk, Stephen D. (2007) The replacement of cadmium as a thermal neutron filter. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 577 (3). pp. 690-695. ISSN 0168-9002

DAGOSTINO, S and PAOLONI, C (1995) INNOVATIVE POWER DISTRIBUTED-AMPLIFIER USING THE WILKINSON COMBINER. IEE Proceedings - Microwaves, Antennas, and Propagation, 142 (2). pp. 97-101. ISSN 1350-2417

DAgostino, S and Paoloni, C (1997) Experimental validation of a large-signal MESFET model for submicron-gate-length devices. Microwave and Optical Technology Letters, 15 (4). pp. 227-229. ISSN 0895-2477

Dar, A. A. and Umar, K. and Mir, N. A. and Haque, M. M. and Muneer, M. and Boxall, C. (2011) Photocatalysed degradation of a herbicide derivative, Dinoterb, in aqueous suspension. Research on Chemical Intermediates, 37 (6). pp. 567-578. ISSN 0922-6168

Davis, C. L. and Dickinson, S. J. and Peyton, A. J. (2005) Process control in the hot strip mill – impedance spectroscopy for remote analysis of steel microstructures. Ironmaking and Steelmaking, 32 (5). pp. 381-384. ISSN 1743-2812

Dawson, D. (1994) Mechatronics moves into muck shifting. Journal of the Institute of Electronics and Electronic Engineering, 5 (4). pp. 23-5.

Dawson, D. and Turnbull, S. R. (1995) The securing of vehicles on roll-on/roll-off ships. Quarterly Transactions of the Royal Institution of Naval Architects, 137. pp. 37-53.

Dawson, Richard and Kelsall, Geoff (2013) Pt dissolution and deposition in high concentration aqueous tri-Iodide/iodide solutions. ECS Electrochemistry Letters, 2 (11). D55-D57. ISSN 2162-8726

Dawson, Richard and Kelsall, Geoff (2007) Recovery of platinum group metals from secondary materials. I. Palladium dissolution in iodide solutions. Journal of Applied Electrochemistry, 37 (1). pp. 3-14. ISSN 1572-8838

Derbali, J. and AbdelMalek, F. and Obayya, S. S. A. and Bouchriha, H. and Letizia, R. (2011) Design of a compact photonic crystal sensor. Optical and Quantum Electronics, 42 (8). pp. 463-472. ISSN 0306-8919

Dewar, Richard J. and Ash, Dean C. and German, Matthew J. and Joyce, Malcolm J. (2006) Practical considerations of the QCM as a viscometer within the food industry : performance deterioration with repeated use and surface roughness. Journal of Food Engineering, 75 (4). pp. 461-468. ISSN 0260-8774

Dewar, Richard J. and Joyce, Malcolm J. (2006) The rheology of maize and maltodextrin-based foodstuffs used in dysphagia therapy. Carbohydrate Polymers, 65 (3). pp. 296-305. ISSN 0144-8617

Dexter, A. C. and Burt, G. and Carter, R. and Tahir, I. and Wang, H. and Davis, K. and Rimmer, R. (2011) First demonstration and performance of an injection locked CW magnetron to phase control a superconducting cavity. Physical Review Special Topics: Accelerators and Beams, 14 (3). 032001. ISSN 1098-4402

Dexter, Amos and Burt, Graeme and Ambattu, Praveen K. and Dolgashev, V. and Jones, R. (2011) CLIC crab cavity design optimisation for maximum luminosity. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 657 (1). pp. 45-51. ISSN 0168-9002

Dickinson, James and Andrieux, Fabrice and Boxall, Colin (2012) Fabrication and Characterisation of the First Graphene Ring Micro Electrodes (GRIMEs). MRS Online Proceedings Library, 1407. ISSN 0272-9172

Dickinson, Stephen J. (2004) Unified aggregate component modelling of dynamic mechatronic systems using bond graphs. International Journal of Electrical Engineering Education, 41 (4). pp. 329-340. ISSN 0020-7209

Dinesh, K. K. J. Ranga and Jiang, X. and van Oijen, J. A. (2012) Analysis of impinging wall effects on hydrogen non-premixed flame. Combustion Science and Technology, 184 (9). pp. 1244-1268. ISSN 0010-2202

Dinesh, K. K. J. Ranga and Jiang, X. and van Oijen, J. A. (2012) Numerical simulation of hydrogen impinging jet flame using flamelet generated manifold reduction. International Journal of Hydrogen Energy, 37 (5). pp. 4502-4515. ISSN 0360-3199

Elfick, A. P. and Green, S. M. and Pinder, I. M. and Unsworth, A. (2000) A novel technique for the detailed size characterization of wear debris. Journal of Materials Science: Materials in Medicine, 11 (5). pp. 267-271. ISSN 0957-4530

Elfick, A. P. D. and Green, S. M. and McCaskie, A. W. and Birch, M. A. (2004) Opsonization of polyethylene wear particles regulates macrophage and osteoblast responses in vitro. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 71B (2). pp. 244-251. ISSN 1552-4973

Elfick, Alistair P. D. and Green, Sarah M. and Krikler, Steve and Unsworth, Anthony (2003) The nature and dissemination of UHMWPE wear debris retrieved from periprosthetic tissue of THR. Journal of Biomedical Materials Research Part A, 65 (1). pp. 95-108. ISSN 1549-3296

Elfick, Alistair P. D. and Smith, Simon L. and Green, Sarah M. and Unsworth, Anthony (2001) The quantitative assessment of UHMWPE wear debris produced in hip simulator testing: the influence of head material and roughness, motion and loading. Wear, 249 (5-6). pp. 517-527. ISSN 1873-2577

Elfick, Alistair P. D. and Smith, Simon L. and Green, Sarah M. and Unsworth, Anthony (2002) A re-appraisal of wear features of acetabular sockets using atomic force microscopy. Wear, 253 (7-8). pp. 839-847. ISSN 1873-2577

Exadaktylos, V. and Silva, M. and Aerts, J.-M. and Taylor, C. James and Berckmans, D. (2008) Real-time recognition of sick pig cough sounds. Computers and Electronics in Agriculture, 63 (2). pp. 207-214. ISSN 0168-1699

Exadaktylos, V. and Taylor, C. James and Wang, Liuping and Young, Peter C. (2009) Forward path model predictive control using a non-minimal state space form. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 223 (3). pp. 353-369. ISSN 0959-6518

Exadaktylos, Vasileios and Silva, Mitchell and Ferrari, Sara and Guarino, Marcella and Taylor, C. James and Aerts, Jean-Marie and Berckmans, Daniel (2008) Time-series analysis for online recognition and localization of sick pig (sus scrofa) cough sounds. Journal of the Acoustical Society of America, 124 (6). pp. 3803-3809. ISSN 0001-4966

Exadaktylos, Vasileios and Taylor, C. James (2010) Multi-objective performance optimisation for model predictive control by goal attainment. International Journal of Control, 83 (7). pp. 1374-1386. ISSN 0020-7179

FORTI, R L and RUSSO, P and BARTOLUCCI, G and LEUZZI, G and PAOLONI, C and RUGGIERI, M (1988) Satellite active antennas for fixed services at Ku-Band. Alta Frequenza, 57 (10). pp. 567-574. ISSN 0002-6557

Fan, P. Z. and Darnell, M. and Honary, B. (1994) New class of polyphase sequences with two-valued auto- and cross-correlation function. Electronics Letters, 30 (13). pp. 1031-1032. ISSN 1350-911X

Fan, P. Z. and Darnell, M. and Honary, B. and da Rocha, V. C. (1994) Cyclic codes for T-user channel over integer rings. Electronics Letters, 30 (3). pp. 209-210. ISSN 1350-911X

Farahmand, M. and Boston, A. J. and Grint, A. N. and Nolan, P. J. and Joyce, Malcolm J. and Mackin, R. O. and D’Mellow, B. and Aspinall, M. D. and Peyton, A. J. and Silfhout, R. van (2007) Detection of explosive substances by tomographic inspection using neutron and gamma-ray spectroscopy. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 261 (1-2). pp. 396-400.

Ferrari, A.C and Kleinsorge, B and Adamopoulos, George and Robertson, J and Milne, W.I and Stolojan, V and Brown, L.M and LiBassi, A and Tanner, B.K (2000) Determination of bonding in amorphous carbons by electron energy loss spectroscopy, Raman scattering and X-ray reflectivity. Journal of Non-Crystalline Solids, 266-26. pp. 765-768. ISSN 0022-3093

French, M. J. (1992) Design insight and technical confidence. International Journal of Mechanical Engineering Education, 20 (2). pp. 113-118. ISSN 2050-4586

French, M. J. and Ramirez, A. (1996) Towards a comparative study of quarter-turn pneumatic valve operators. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 210. pp. 543-552. ISSN 2041-2975

French, M. J. and Widden, M. B. (2000) The spring-and-lever balancing mechanism, George Carwardine and the anglepoise lamp. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 214 (3). pp. 501-508. ISSN 2041-2983

French, M. J. and Widden, Martin B. (2001) The exploitation of low-head hydropower by pressure interchange with air, using siphons. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 215 (2). pp. 223-230. ISSN 0957-6509

Fu, Feng and Lam, Dennis and Ye, Jianqiao (2008) Modelling semi-rigid composite joints with precast hollowcore slabs in hogging moment region. Journal of Constructional Steel Research, 64 (12). pp. 1408-1419. ISSN 0143-974X

Fu, Feng and Lam, Dennis and Ye, Jianqiao (2010) Moment resistance and rotation capacity of semi-rigid composite connections with precast hollowcore slabs. Journal of Constructional Steel Research, 66 (3). pp. 452-461. ISSN 0143-974X

Fu, Feng and Lam, Dennis and Ye, Jianqiao (2007) Parametric study of semi-rigid composite connections with 3-D finite element approach. Engineering Structures, 29 (6). pp. 888-898. ISSN 0141-0296

GIANNINI, F and PAOLONI, C (1988) Modeling of shunt connected single radial stub for CAD applications. Alta Frequenza, 57 (5). pp. 227-232. ISSN 0002-6557

Gamage, Kelum and Joyce, Malcolm and Taylor, Graeme (2012) A comparison of collimator geometries for imaging mixed radiation fields with fast liquid organic scintillators. IEEE Transactions on Nuclear Science, 59 (4). pp. 1432-1437. ISSN 0018-9499

Gamage, Kelum and Joyce, Malcolm and Taylor, Graeme (2012) A digital approach to neutron-gamma imaging with a narrow tungsten collimator aperture and a fast organic liquid scintillator detector. Applied Radiation and Isotopes, 70 (7). pp. 1223-1227. ISSN 0969-8043

Ganah, A. A. and Bouchlaghem, N. and Anumba, C. J. (2005) Computer Visualisation Support for Constructability. Proceedings of ITcon, 10. pp. 69-84.

Gannat, G. A. and Pinto, Domenico and Obayya, Salah (2009) New configuration for optical waveguide power splitters. IET Optoelectronics, 3 (2). pp. 105-111. ISSN 1751-8768

Ghavipanjeh, F. and Taylor, C. James and Young, Peter C. and Chotai, Arun (2001) Data-based modelling and proportional integral plus (PIP) control of nitrate in an activated sludge benchmark. Water Science and Technology, 44 (1). pp. 87-94. ISSN 0273-1223

Gibson, G. and Monk, S. D. and Padgett, M. (2002) A field-portable, laser-diode spectrometer for the ultra-sensitive detection of hydrocarbon gases. Journal of Modern Optics, 49 (5-6). pp. 769-776. ISSN 1362-3044

Godet, Christian and Adamopoulos, George and Kumar, Shushil and Katsuno, Takashi (2005) Optical and electronic properties of plasma-deposited hydrogenated amorphous carbon nitride and carbon oxide films. Thin Solid Films, 482 (1-2). pp. 24-33. ISSN 0040-6090

Grant, D.M. and Green, S.M. and Wood, J.V. (1995) The surface performance of shot peened and ion implanted NiTi shape memory alloy. Acta Metallurgica et Materialia, 43 (3). pp. 1045-1051. ISSN 0956-7151

Green, S. M. and Grant, D. M. and Kelly, N. R. (1997) Powder metallurgical processing of Ni-Ti shape memory alloy. Powder Metallurgy, 40 (1). pp. 43-47. ISSN 0032-5899

Green, S. M. and Grant, D. M. and Wood, J. V. (1997) Shape Memory Transformation in Mechanically Alloyed Ni-50at % Ti. Journal de Physique 4, 07 (C5). pp. 351-356. ISSN 1155-4339

Green, S. M. and Grant, D. M. and Wood, J. V. (1997) XPS characterisation of surface modified Ni-Ti shape memory alloy. Materials Science and Engineering: A, 224 (1–2). pp. 21-26. ISSN 0921-5093

Green, S.M. (2006) Deformation of materials. Current Orthopaedics, 20 (1). pp. 9-15. ISSN 0268-0890

Gu, Jun and Feng, Zhi-hua and Ma, Xiandong and Ni, Jun-fang (2011) Proportional-integral-plus control of robotic excavator arm utilising state-dependent parameter model. Applied Mechanics and Materials, 48-49. pp. 1323-1327. ISSN 1660-9336

Gu, Jun and Taylor, C. James and Seward, Derek W. (2004) Proportional-Integral-Plus Control Strategy of an Intelligent Excavator. Computer-Aided Civil and Infrastructure Engineering, 19 (1). pp. 16-27. ISSN 1093-9687

Gu, Jun and Taylor, James and Seward, Derek (2007) Modelling of an hydraulic excavator using simplified refined instrumental variable (SRIV) algorithm. Journal of Control Theory and Applications, 5 (4). pp. 391-396. ISSN 1672-6340

Hambali, Ruzy Haryati and Smith, Paul and Rennie, Allan (2012) Determination of the effect of part orientation to the strength value on additive manufacturing FDM for end-use parts by physical testing and validation via three-dimensional finite element analysis. International Journal of Materials Engineering Innovation, 3 (3-4). pp. 269-281. ISSN 1757-2754

Hannu, Jari and Koltsov, Denis and Xu, Zhou and Richardson, Andrew and Moilanen, Markku (2008) An Embedded Test & Health Monitoring Strategy for Detecting and Locating Faults in Aerospace Bus Systems. Proceedings of the IEEE.

Hastas, N. A. and Dimitriadis, C. A. and Panayiotatos, Y. and Tassis, D. H. and Logothetidis, S. and Papadimitriou, D. and Roupakas, G. and Adamopoulos, George (2002) High-field transport and noise properties of sputter-deposited amorphous carbon-silicon heterojunctions. Semiconductor Science and Technology, 17 (7). pp. 662-667. ISSN 0268-1242

Heiser, T. and Adamopoulos, George and Brinkmann, M. and Giovanella, U. and Ould-Saad, S. and Brochon, C. and van de Wetering, K. I. and Hadziioannou, G. (2006) Nanostructure of self-assembled rod-coil block copolymer films for photovoltaic applications. Thin Solid Films, 511-51. pp. 219-223. ISSN 0040-6090

Higson, S. R. and Drake, P. and Stamp, D. W. and Peyton, A. J. and Binns, R. and Lyons, A. and Lionheart, W. R. B. (2003) Development of a sensor for visualisation of steel flow in the continuous casting nozzle. Revue de Metallurgie-Cahiers d'Informations Techniques, 2003 (6). pp. 629-632.

Hirst, B. and Gibson, G. and Gillespie, S. and Archibald, I. and Podlaha, O. and Skeldon, K. D. and Courtial, J. and Monk, S. and Padgett, M. (2004) Oil and gas prospecting by ultra-sensitive optical gas detection with inverse gas dispersion modelling. Geophysical Research Letters, 31 (L12115). 4 PP. ISSN 0094-8276

Honary, B. and Zolghadr, F. and Darnell, M. (1992) Improved HF modem using convolutional coding. Electronics and Communication Engineering Journal, 4 (2). pp. 73-82. ISSN 0954-0695

Hoyle, C. and Peyton, A. J. (1999) Shunt bootstrapping technique to improve bandwidth of transimpedance amplifiers. Electronics Letters, 35 (5). pp. 369-370. ISSN 0013-5194

Hu, B. and Sewell, P. and Wykes, J. and Vukovic, A. and Benson, T. (2008) Fourth-order accurate sub-sampling for finite-difference analysis of surface plasmon metallic waveguides. Microwave and Optical Technology Letters, 50 (4). pp. 995-1000. ISSN 0895-2477

Hu, B. and Varma, G. and Schaeffter, T. and Keevil, S. F. and Glover, P. (2012) A Novel Receive-Only Liquid Nitrogen ( LN2 )-Cooled RF Coil for High-Resolution In Vivo Imaging on a 3-Tesla Whole-Body Scanner. IEEE Transactions on Instrumentation and Measurement, 61 (1). pp. 129-139. ISSN 0018-9456

Ibarra-Medina, J. and Pinkerton, A. J. (2011) Numerical investigation of powder heating in coaxial laser metal deposition. Surface Engineering, 27 (10). pp. 754-761. ISSN 0267-0844

Ibarra-Medina, Juansethi and Pinkerton, Andrew J. (2010) A CFD model of the laser, coaxial powder stream and substrate interaction in laser cladding. Physics Procedia, 5 (B). pp. 337-346. ISSN 1875-3892

Jackson, Sarah and Monk, Stephen and Nye, Daniel and Colling, Bethany and Stanley, Steve (2012) Proposal to characterise legacy Sellafield ponds using SONAR and RadLine™. Applied Radiation and Isotopes, 70 (7). pp. 1162-1165. ISSN 0969-8043

Jafri, A. and Green, S.M. and McCaskie, A.W. and Partington, P.F. and Muller, S.D. (2006) OPTIMAL PROSTHESIS TEMPERATURE IN CEMENTED TOTAL HIP ARTHROPLASTY. Journal of Bone and Joint Surgery, British Volume, 88-B (SUPP I). p. 365.

Jafri, A. A. and Green, S. M. and Partington, P. F. and McCaskie, A. W. and Muller, S. D. (2004) Pre-heating of components in cemented total hip arthroplasty. Journal of Bone and Joint Surgery, British Volume, 86B (8). pp. 1214-1219. ISSN 0301-620X

Jarvis, Andrew and Leedal, David and Taylor, James and Young, Peter (2009) Stabilizing global mean surface temperature: a feedback control perspective. Environmental Modelling and Software, 24 (5). pp. 665-674. ISSN 1364-8152

Jeffery, Carl and Cutajar, Rueben and Richardson, Andrew M. D. and Prosser, Steve and Lickess, M. and Riches, Steve (2005) The integration of on-line monitoring and reconfiguration functions into a safety critical automotive electronic control unit. Journal of Electronic Testing, 21 (4). pp. 405-416. ISSN 0923-8174

Jeffery, Carl and Zhou, Xu and Richardson, Andrew M. D. (2005) Using bias superposition to test a thick film conductance sensor. Journal of Physics: Conference Series, 15. pp. 161-166. ISSN 1742-6596

Johnstone, S. and Peyton, A. J. (2001) The application of parametric 3D finite element modelling techniques to evaluate the performance of a magnetic sensor system. Sensors and Actuators A: Physical, 93 (2). pp. 109-116. ISSN 0924-4247

Joyce, M. (1997) How does boron stop neutrons? Third Millennium Magazine.

Joyce, M. (1997) The art (or science?) of creativity. Third Millennium Magazine.

Joyce, M. and Regan, P. (1997) Fusion finds the Midas touch. Daily Telegraph.

Joyce, M. and Regan, P. (1997) In the Alchemist's chair. Third Millennium Magazine.

Joyce, M. J. (1998) Silicon: a revolutionary ingredient. Third Millennium Magazine, 1 (4).

Joyce, M. J. and Aspinall, M. D. and Cave, F. D. and Georgopoulos, K. and Jarrah, Z. (2010) The Design, Build and Test of a Digital Analyzer for Mixed Radiation Fields. IEEE Transactions on Nuclear Science, 57 (5). pp. 2625-2630. ISSN 0018-9499

Joyce, M. J. and Franklin, K. and Neale, P. J. and Kiffin, S. (1998) What stimulates the creative process? Journal of Design and Technology, 3. pp. 113-117.

Joyce, M. J. and Todaro, P. and Port, S. and Barnes, C. and May, J. A. W. (2000) Evaporation of Sessile Drops: Application of the Quartz Crystal Microbalance. Langmuir, 16 (8). pp. 4024-4033. ISSN 1520-5827

Joyce, Malcolm and Aspinall, Michael and Cave, Frank and Lavietes, Anthony (2012) Real-time digital pulse-shape discrimination in non-hazardous fast liquid scintillation detectors: prospects for safety and security. IEEE Transactions on Nuclear Science, 59 (4). pp. 1245-1251. ISSN 0018-9499

Joyce, Malcolm J. and Albadri, Abdulrahman and Benson, Chris and Price, Robert A. (2006) The empirical dependence of radiation-induced charge neutralization on negative bias in dosimeters based on the metal oxide-semiconductor field-effect transistor. Journal of Applied Physics, 100 (4). 044505. ISSN 1089-7550

Joyce, Malcolm J. and Ash, D and Barnes, C and Jeffries, A (2003) Viscosity measurement of industrial oils using the droplet quartz crystal microbalance. Measurement Science and Technology, 14 (11). pp. 1955-1962. ISSN 0957-0233

Joyce, Malcolm J. and Aspinall, M. D. and D'Mellow, B. and Mackin, R. O. (2007) Digital discrimination of neutrons and ?-rays in liquid scintillators using pulse gradient analysis. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 578 (1). pp. 191-197. ISSN 0168-9002

Joyce, Malcolm J. and Dewar, Richard J. (2006) Time-dependent rheology of starch thickeners and the clinical implications for dysphagia therapy. Dysphagia, 21 (4). pp. 264-269. ISSN 0179-051X

Kemp, Roger (2003) Protecting the Railways: the Management of Safety in a Fragmented Industry. Ingenia, 16. pp. 35-39. ISSN 1472-9768

Khan, A. and Mir, Niyaz A. and Haque, M. M. and Muneer, M. and Vijayalakshmi, S. and Boxall, C. (2012) Heterogeneous photocatalyzed degradation of a pesticide derivative, 3-chloro-4-methoxyaniline, in aqueous suspensions of titania. Research on Chemical Intermediates, 38 (7). pp. 1323-1333. ISSN 0922-6168

Khan, E. and Shaukat, S. F. and Monk, S. D. (2009) Monte Carlo GPS based Solution for speed limit indicator. World Applied Sciences Journal, 6 (12). pp. 1691-1697. ISSN 1818-4952

Kleinsorge, B. and Rodil, S.E. and Adamopoulos, George and Robertson, J. and Grambole, D. and Fukarek, W. (2001) Hydrogen and disorder in diamond-like carbon. Diamond and Related Materials, 10 (3-7). pp. 965-969. ISSN 0925-9635

Koltsov, Denis and Joachim, C. and Ondarcuhu, T. and Saifullah, M. (2002) A reliable scheme for fabricating sub-5 nm co-planar junctions for single-molecule electrons. Nanotechnology, 13 (5). pp. 659-662. ISSN 0957-4484

Kumar, Sushil and Godet, C. and Goudovskikh, A. and Kleider, J.P. and Adamopoulos, George and Chu, V. (2004) High-field transport in amorphous carbon and carbon nitride films. Journal of Non-Crystalline Solids, 338. pp. 349-352. ISSN 0022-3093

Lechner, A. and Burbidge, Martin J. and Richardson, Andrew M. D. (2004) Flexible embedded test solution for high-speed analogue front-end architectures. IEE Proceedings - Circuits, Devices and Systems, 151 (4). pp. 359-369. ISSN 1350-2409

Lechner, A. and Georgopoulos, K. and Burbidge, M. and Richardson, A. (2006) Investigation into the use of hybrid solutions for high resolution A/D converter testing. Journal of Electronic Testing, 22 (4-6). pp. 359-370. ISSN 0923-8174

Lee, T. J. and Oh, K. S. V. (1993) Object-oriented programming for building design. Structural Engineering Review, 5 (2).

Letizia, R. and Obayya, S. S. A. (2008) Efficient multiresolution time-domain analysis of arbitrarily shaped photonic devices. IET Optoelectronics, 2 (6). pp. 241-253. ISSN 1751-8768

Letizia, Rosa and Obayya, Salah S. A. (2009) Efficient Second Harmonic Generation Through Selective Photonic Crystal-Microcavity Coupling. Journal of Lightwave Technology, 27 (21). pp. 4763-4772. ISSN 0733-8724

Letizia, Rosa and Pinto, Domenico (2012) Accurate analysis of plasmonic devices with a new Drude Critical Points MRTD method. IEEE Photonics Technology Letters, 24 (18). pp. 1587-1590. ISSN 1041-1135

Li, Lin and Syed, W. U. H. and Pinkerton, A. J. (2006) Rapid additive manufacturing of functionally graded structures using simultaneous wire and powder laser deposition. Virtual and Physical Prototyping, 1 (4). pp. 217-225. ISSN 1745-2759

Lingwood, Christopher and Burt, Graeme and Dexter, Amos and Goudket, Phillipe and Smith, Jonathan and Stoltz, Peter (2012) Phase space analysis of multipactor saturation in rectangular waveguide. Physics of Plasmas, 19 (3). ISSN 1070-664X

Liu, C. and Arnell, R. D. and Gibbons, A. R. and Green, S. M. and Ren, L. and Tong, J. (2000) Surface modification of PTFE by plasma treatment. Surface Engineering, 16 (3). pp. 215-217. ISSN 0267-0844

Liu, C. and Green, S. and Watkins, N. and Baker, D. and McCaskie, A. (2005) Dynamic creep and mechanical characteristics of SmartSet GHV bone cement. Journal of Materials Science: Materials in Medicine, 16 (2). pp. 153-160. ISSN 0957-4530

Liu, C. and Green, S. M. and Watkins, N. D. and Gregg, P. J. and McCaskie, A. W. (2001) Some failure modes of four clinical bone cements. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 215 (4). pp. 359-366. ISSN 0954-4119

Liu, C. and Green, S. M. and Watkins, N. D. and Gregg, P. J. and McCaskie, A. W. (2003) A preliminary hip joint simulator study of the migration of a cemented femoral stem. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 217 (2). pp. 127-135. ISSN 0954-4119

Liu, C. and Green, S. M. and Watkins, N. D. and Gregg, P. J. and McCaskie, A. W. and Mccaskie, A W (2002) Creep behavior comparison of CMW1 and palacos R-40 clinical bone cements. Journal of Materials Science: Materials in Medicine, 13 (11). pp. 1021-1028. ISSN 0957-4530

Liu, C. Z. and Green, S. M. and Watkins, N. D. and McCaskie, A. W. (2003) On the particle size and molecular weight distributions of clinical bone cements. Journal of Materials Science Letters, 22 (16). pp. 1147-1150. ISSN 0261-8028

Liu, C. Z. and Ren, L. Q. and Tong, J. and Green, S. M. and Arnell, R. D. (2002) Effects of operating parameters on the lubricated wear behavior of a PA-6/UHMWPE blend: a statistical analysis. Wear, 253 (7-8). pp. 878-884. ISSN 1873-2577

Liu, C. Z. and Ren, L. Q. and Tong, J. and Joyce, T. J. and Green, S. M. and Arnell, R. D. (2001) Statistical wear analysis of PA-6/UHMWPE alloy, UHMWPE and PA-6. Wear, 249 (1-2). pp. 31-36. ISSN 1873-2577

Liu, Chaozong and Fairhurst, R. G. and Ren, L. Q. and Green, S. M. and Tong, J. and Arnell, R. D. (2002) Co-deposition of titanium/polytetrafluoroethylene films by unbalanced magnetron sputtering. Surface and Coatings Technology, 149 (2-3). pp. 143-150. ISSN 0257-8972

Liu, Dongsheng (2004) Asymptotic expansion of closed geodesics in homology classes. Glasgow Mathematical Journal, 46 (2). pp. 283-299. ISSN 0017-0895

Liu, Dongsheng (2004) Asymptotic expansion of closed orbits in homology classes for Anosov flows. Mathematical Proceedings of the Cambridge Philosophical Society, 136 (2). pp. 383-397. ISSN 0305-0041

Ma, Xiandong (2012) Investigations of the state-of-the-art methods for electromagnetic NDT and electrical condition monitoring. Insight – Non-Destructive Testing and Condition Monitoring, 54 (9). pp. 482-488. ISSN 1354-2575

Ma, Xiandong and Wang, Guangming and Cross, Philip and Zhang, Xuecheng (2012) A remote condition monitoring system for wind-turbine based DG systems. Journal of Physics: Conference Series, 364 (1). ISSN 1742-6596

Mahmood, K. and Stevens, N. and Pinkerton, A.J. (2012) Laser clad corrosion protection for mild and harsh environments. Surface Engineering, 28 (8). pp. 576-584. ISSN 1743-2944

Mahmood, Khalid and Stevens, Nicholas and Pinkerton, Andrew J. (2012) Laser surface modification using Inconel 617 machining swarf as coating material. Journal of Materials Processing Technology, 212 (6). pp. 1271-1280. ISSN 0924-0136

Mahmood, Khalid and Syed, Waheed Ul Haq and Pinkerton, Andrew J. (2011) Innovative reconsolidation of carbon steel machining swarf by laser metal deposition. Optics and Lasers in Engineering, 49 (2). pp. 240-247. ISSN 0143-8166

Major, J.D. and Proskuryakov, Y.Y. and Durose, K. and Green, S. (2007) Nucleation of CdTe thin films deposited by close-space sublimation under a nitrogen ambient. Thin Solid Films, 515 (15). pp. 5828-5832. ISSN 0040-6090

Majumdar, J D and Pinkerton, A. J. and Liu, Z and Manna, I and Li, L (2005) Mechanical and electrochemical properties of multiple-layer diode laser cladding of 316L stainless steel. Applied Surface Science, 247 (1-4). pp. 373-377. ISSN 0169-4332

Majumdar, J D and Pinkerton, A. J. and Liu, Z and Manna, I and Li, L (2005) Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel. Applied Surface Science, 247 (1-4). pp. 320-327. ISSN 0169-4332

McCabe, A. P. and Aggidis, George A. (2009) Optimum mean power output of a point-absorber wave energy converter in irregular waves. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223 (Number). pp. 773-781. ISSN 0957-6509

McCabe, Andrew (2013) Constrained optimization of the shape of a wave energy collector by genetic algorithm. Renewable Energy, 51 (n/a). pp. 274-284. ISSN 0960-1481

Melling, G. and Bradley, D. A. and McKee, D. and Widden, M. B. (1997) The development of a rapid-prototyping technique for mechatronic-augmented heavy plant. Automation in Construction, 5 (5). pp. 365-378.

Mineo, Mauro and Di Carlo, A. and Paoloni, C. (2010) Analytical Design Method for Corrugated Rectangular Waveguide SWS THz Vacuum Tubes. Journal of Electromagnetic Waves and Applications, 24 (17-18). pp. 2479-2494. ISSN 0920-5071

Mineo, Mauro and Paoloni, C. (2010) Narrow corrugation rectangular waveguide for terahertz TWTs. Electronics Letters, 46 (13). pp. 927-928. ISSN 0013-5194

Mineo, Mauro and Paoloni, Claudio (2012) Backward wave mode interaction impedance at THz frequencies for corrugated waveguide. Microwave and Optical Technology Letters, 54 (4). pp. 837-839. ISSN 0895-2477

Mineo, Mauro and Paoloni, Claudio (2012) Comparison of THz backward wave oscillators based on corrugated waveguides. Progress In Electromagnetics Research Letters, 30. pp. 163-171.

Mineo, Mauro and Paoloni, Claudio (2010) Corrugated Rectangular Waveguide Tunable Backward Wave Oscillator for Terahertz Applications. IEEE Transactions on Electron Devices, 57 (6). pp. 1481-1484. ISSN 0018-9383

Mineo, Mauro and Paoloni, Claudio (2010) Double-Corrugated Rectangular Waveguide Slow-Wave Structure for Terahertz Vacuum Devices. IEEE Transactions on Electron Devices, 57 (11). pp. 3169-3175. ISSN 0018-9383

Mineo, Mauro and Paoloni, Claudio (2012) Improved Corrugation Cross-Sectional Shape in Terahertz Double Corrugated Waveguide. IEEE Transactions on Electron Devices, 59 (11). 3116 -3119. ISSN 0018-9383

Mir, Niyaz A. and Haque, Malik M. and Khan, Abuzar and Muneer, Mohd and Boxall, Colin (2012) Photoassisted Degradation of a Herbicide Derivative, Dinoseb, in Aqueous Suspension of Titania. Scientific World Journal, 2012. -. ISSN 2356-6140

Miyajima, Y. and Adamopoulos, George and Stolojan, V. and Garcia-Caurel, E. and Drévillon, B. and Shannon, J. M. and Silva, S. R. P. (2008) Electronic state modification in laser deposited amorphous carbon films by the inclusion of nitrogen. Journal of Applied Physics, 104 (6). ISSN 0021-8979

Miyajima, Yoji and Henley, S. J. and Adamopoulos, George and Stolojan, V. and Garcia-Caurel, E. and Drévillon, B. and Shannon, J. M. and Silva, S. R. P. (2009) Pulsed laser deposited tetrahedral amorphous carbon with high sp(3) fractions and low optical bandgaps. Journal of Applied Physics, 105 (7). 073521. ISSN 0021-8979

Moat, R. J. and Pinkerton, A. J. and Li, L. and Withers, P. J. and Preuss, M. (2009) Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy. Acta Metallurgica et Materialia, 57 (4). pp. 1220-1229. ISSN 0956-7151

Moat, R. J. and Pinkerton, A. J. and Li, L. and Withers, P. J. and Preuss, M. (2011) Residual stresses in laser direct metal deposited Waspaloy. Materials Science and Engineering: A, 528 (6). pp. 2288-2298. ISSN 0921-5093

Monk, S. and Arlt, J. and Robertson, D. A. and Courtial, J. and Padgett, M. J. (1999) The generation of Bessel beams at millimetre-wave frequencies by use of an axicon. Optics Communications, 170 (4-6). pp. 213-215. ISSN 0030-4018

Monk, Stephen and Selwood, Mark (2011) A Monte Carlo simulation of monoenergetic neutrons traversing rectangular and spherical polyethylene moderators. Radiation Protection Dosimetry, 144 (1-4). pp. 182-186. ISSN 1742-3406

Monk, Stephen David (2012) Variation in measured neutron fluence in low radiation environments when altering sensor density on the surface of a sphere. Applied Radiation and Isotopes, 70 (7). pp. 1288-1290. ISSN 0969-8043

Moore, A. J. and Goldenberg, L. M. and Bryce, M. R. and Petty, M. C. and Moloney, J. and Howard, J. A. K. and Joyce, M. J. and Port, S. N. (2000) New crown annelated tetrathiafulvalenes: synthesis, electrochemistry, self-assembly of thiol derivatives and metal cation recognition. Journal of Organic Chemistry, 65 (24). pp. 8269-8276. ISSN 1520-6904

Moore, Adrian J. and Goldenberg, Leonid M. and Bryce, Martin R. and Petty, Michael C. and Monkman, Andrew P. and Marenco, Claudia and Yarwood, Jack and Joyce, Malcolm J. and Port, Simon N. (1998) Cation recognition by self-assembled layers of novel crown-annelated tetrathiafulvalenes. Advanced Materials, 10 (5). pp. 395-398. ISSN 1521-4095

Mottram, J. T. and Turvey, Geoffrey J. (2003) Physical test data for the appraisal of design procedures for bolted joints in pultruded FRP structural shapes and systems. Progress in Structural Engineering and Materials, 5 (4). pp. 195-222. ISSN 1365-0556

Muir, E. A. and Bradshaw, A. (1996) Control law design for a thrust vectoring fighter aircraft using robust inverse dynamics estimation. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 210. ISSN 2041-3025

Muller, Scott D. and Green, Sarah M. and McCaskie, Andrew W. (2002) The dynamic volume changes of polymerising polymethyl methacrylate bone cement. Acta Orthopaedica Scandinavica, 73 (6). pp. 684-687. ISSN 0001-6470

Murphy, Pat and Boxall, Colin and Taylor, Robin J. (2012) Investigation of water adsorption on metal oxide surfaces under conditions representative of PuO2 storage containers. MRS Online Proceedings Library, 1383. ISSN 1946-4274

Narendra, K. and Collantes, J. M. and Paoloni, C. and Limiti, E. (2009) Parametric oscillations in distributed power amplifiers. Electronics Letters, 45 (25). pp. 1325-1326. ISSN 0013-5194

Narendra, K. and Limiti, E. and Paoloni, C. and Collantes, J. M. and Jansen, R. H. and Yarman, B. S. (2010) Vectorially combined distributed power amplifier with load pull impedance determination. Electronics Letters, 46 (16). pp. 1137-1138. ISSN 0013-5194

Narendra, K. and Limiti, E. and Paoloni, C. and Collantes, J.-M. and Jansen, R. and Yarman, S. (2012) Vectorially Combined Distributed Power Amplifiers for Software-Defined Radio Applications. IEEE Transactions on Microwave Theory and Techniques, 60 (10). pp. 3189-3200. ISSN 0018-9480

Narita, Y. and Turvey, Geoffrey J. (2004) Maximising the buckling loads of symmetrically laminated composite rectangular plates using a layerwise optimisation (LO) approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 218 (7). pp. 681-691. ISSN 0954-4062

Neagu, Corneliu and Lupeanu, Mihaela and Rennie, Allan (2013) A new design concept for milling tools of spherical surfaces obtained by kinematic generation. Applied Mathematical Modelling, 37 (9). pp. 6119-6134. ISSN 0307-904X

Ni, J. and Honary, B. (1993) System state-independent-unique-decodable CCMA codes. IEE Proceedings I (Communications, Speech and Vision), 140 (3). pp. 185-188. ISSN 0956-3776

Nisar, Salman and Li, Lin and Sheikh, Mohammad A. and Pinkerton, Andrew J. (2010) The effect of continuous and pulsed beam modes on cut path deviation in diode laser cutting of glass. International Journal of Advanced Manufacturing Technology, 49 (1-4). pp. 167-175. ISSN 0268-3768

Nisar, Salman and Sheikh, M. A. and Li, Lin and Pinkerton, Andrew J. and Safdar, Shakeel (2010) The effect of laser beam geometry on cut path deviation in diode laser chip-free cutting of glass. Journal of Manufacturing Science and Engineering, 132 (1). ISSN 1087-1357

Niu, Zhongrong and Cheng, Changzheng and Ye, Jianqiao and Recho, Naman (2009) A new boundary element approach of modeling singular stress fields of plane V-notch problems. International Journal of Solids and Structures, 46 (16). pp. 2999-3008. ISSN 0020-7683

Niu, Zhongrong and Ge, Dali and Cheng, Changheng and Ye, Jianqiao and Recho, Naman (2009) Evaluation of the stress singularities of plane V-notches in bonded dissimilar materials. Applied Mathematical Modelling, 33 (3). pp. 1776-1792. ISSN 0307-904X

O'Brien, S. and Widden, M. B. (1992) The application of transputer control to a robotically-serviced manufacturing cell. Transputer Mailshot. pp. 23-30.

O'Hana, S. and Pinkerton, A. J. and Shoba, K. and Gale, A. W. and Li, L. (2008) Laser surface colouring of titanium for contemporary jewellery. Surface Engineering, 24 (2). pp. 147-153. ISSN 0267-0844

Pamunuwa, Dinesh B. (2005) Modelling delay and noise in arbitrarily coupled RC trees. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 24 (11). pp. 1725-1739. ISSN 0278-0070

Pamunuwa, Dinesh B. and Elassaad, S. and Tenhunen, H. (2003) Modelling noise and delay in VLSI circuits. Electronics Letters, 39 (3). pp. 269-271. ISSN 0013-5194

Pamunuwa, Dinesh B. and Tenhunen, H. and Zheng, L. (2003) Maximizing throughput over parallel wire structures in the deep submicrometer regime. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 11 (2). pp. 224-243. ISSN 1063-8210

Pamunuwa, Dinesh B. and Öberg, Johnny and Millberg, Mikael and Zheng, Li-Rong and Jantsch, Axel and Tenhunen, Hannu (2004) A study on the implementation of 2-D mesh-based networks-on-chip in the nanometre regime. Integration, the VLSI Journal, 38 (1). pp. 3-17. ISSN 0167-9260

Paoloni, C (2006) Analysis of dielectric rods with arbitrary shape for low-dispersion slow-wave structures in helix TWTs. IEEE Transactions on Electron Devices, 53 (6). pp. 1490-1493. ISSN 0018-9383

Paoloni, C (2002) Fast computation of FET power gains. Microwave and Optical Technology Letters, 33 (2). pp. 104-106. ISSN 0895-2477

Paoloni, C (2000) HEMT-HBT matrix amplifier. IEEE Transactions on Microwave Theory and Techniques, 48 (8). pp. 1308-1312. ISSN 0018-9480

Paoloni, C (2005) Nonrounded dielectric rectangular rods in helix traveling-wave tubes. Microwave and Optical Technology Letters, 47 (2). pp. 101-103. ISSN 0895-2477

Paoloni, C (2005) Yield improvement via helix-pitch profile adjustment in multisection helix traveling-wave tubes. Microwave and Optical Technology Letters, 46 (5). pp. 433-435. ISSN 0895-2477

Paoloni, C (2000) A simplified procedure to calculate the power gain definitions of FET's. IEEE Transactions on Microwave Theory and Techniques, 48 (3). pp. 470-474. ISSN 0018-9480

Paoloni, C and D'Agostino, S (1999) An HBT unilateral model to design distributed amplifiers. IEEE Transactions on Microwave Theory and Techniques, 47 (6). pp. 795-798. ISSN 0018-9480

Paoloni, C and DAgostino, S (1997) Design procedure for monolithic matrix amplifier. IEEE Transactions on Microwave Theory and Techniques, 45 (1). pp. 135-139. ISSN 0018-9480

Paoloni, C and DAgostino, S (1996) A practical approach based on a unilateral FET model for the design of a MMIC distributed amplifier. Microwave and Optical Technology Letters, 13 (4). pp. 219-221. ISSN 0895-2477

Paoloni, Claudio (2008) On the Analysis and Improvement of Yield for TWT Small-Signal Gain. IEEE Transactions on Electron Devices, 55 (10). pp. 2774-2778. ISSN 0018-9383

Paoloni, Claudio and Mineo, Mauro and Krozer, Viktor and Di Carlo, Aldo and Brunetti, Francesca and Ulisse, Giacomo and Durand, A. and Kotiranta, M. and Fiorello, Anna Maria and Dispenza, Massimiliano and Secchi, A. and Zhurbenko, V. and Bouamrane, F. and Megtert, S. and Bouvet, Thomas and Tamburri, E. and Cojocarua, C. -S. and Gohier, A. (2011) Design and Fabrication of a 1 THz Backward Wave Amplifier. Terahertz Science and Technology, 4 (4). pp. 149-163.

Papaelias, M. P. H. and Strangwood, M. and Peyton, A. J. and Davis, C. L. (2004) Detection and measurement of phase transformation in steels using electromagnetic sensors – experimental results and modelling simulations. Metallurgical and Materials Transactions A, 35A (13). pp. 965-972. ISSN 1073-5623

Papaelias, M. P. H. and Strangwood, M. and Peyton, A. J. and Davis, C. L. (2004) Effect of microstructural variations on smart inductive sensor measurements of phase transformation in steel. Scripta Materialia, 51 (5). pp. 379-383. ISSN 1359-6462

Papaelias, M. P. H. and Strangwood, M. and Peyton, A. J. and Davis, C. L. (2002) Measurement of phase transformations in steel using electromagnetic sensors. Ironmaking and Steelmaking, 29 (6). pp. 469-476. ISSN 0301-9233

Patil, Sunit and Mahon, Andrew and Green, Sarah and McMurtry, Ian and Port, Andrew (2006) A biomechanical study comparing a raft of 3.5 mm cortical screws with 6.5 mm cancellous screws in depressed tibial plateau fractures. Knee, 13 (3). pp. 231-235. ISSN 0968-0160

Pazooki, Alireza and Cao, Dongpu and Rakheja, Subhash and Boileau, Paul-Emile (2010) Experimental and analytical evaluations of a torsio-elastic suspension for off-road vehicles. SAE International Journal of Materials and Manufacturing, 3 (1). pp. 326-338. ISSN 1946-3979

Pazooki, Alireza and Rakheja, Subhash and Cao, Dongpu (2014) Kineto-dynamic directional response analysis of an articulated frame steer vehicle. International Journal of Vehicle Design, 65 (1). pp. 1-30. ISSN 0143-3369

Pazooki, Alireza and Rakheja, Subhash and Cao, Dongpu (2012) Modelling and validation of off-road vehicle ride dynamics. Mechanical Systems and Signal Processing, 28. pp. 679-695. ISSN 0888-3270

Peyton, A. J. (2000) The First World Congress on Industrial Process Tomography. Inverse Problems, 16 (2). pp. 3-5. ISSN 0266-5611

Peyton, A. J. and Mackin, R. O. and Goss, D. and Wan-Daud, W. A. and Crescenzo, E. and Saunders, N. H. and Tapp, H. S. (2003) Addressing the difficulties in using inductive methods to evaluating human body composition. Biométrie Humaine et Anthropologie, 21. pp. 69-77. ISSN 1279-7863

Peyton, A. J. and Yu, Z. Z. and Lyon, G. (1996) An overview of electromagnetic inductance tomography: description of three different systems. Measurement Science and Technology, 7. pp. 261-271. ISSN 0957-0233

Pinkerton, A J and Li, L (2004) Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling. Journal of Manufacturing Science and Engineering, 126 (1). pp. 33-41. ISSN 1087-1357

Pinkerton, A J and Li, L (2004) Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances. Journal of Physics D: Applied Physics, 37 (14). pp. 1885-1895. ISSN 0022-3727

Pinkerton, A J and Li, L. (2004) An analytical model of energy distribution in laser direct metal deposition. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218 (4). pp. 363-374. ISSN 0954-4054

Pinkerton, A J and Syed, W U H and Li, L (2006) An experimental and theoretical investigation of combined gas- and water-atomized powder deposition with a diode laser. Journal of Laser Applications, 18 (1). pp. 73-80. ISSN 1042-346X

Pinkerton, A. J. (2012) Guest Editorial: The 36th MATADOR Conference 2010. Materials and Manufacturing Processes, 27 (4). p. 363. ISSN 1042-6914

Pinkerton, A. J. (2009) Laser and electron beams - evolving tools for surface engineering. Surface Engineering, 25 (3). pp. 177-179. ISSN 0267-0844

Pinkerton, A. J. and Li, L. (2004) Multiple-layer cladding of stainless steel using a high-powered diode laser: an experimental investigation of the process characteristics and material properties. Thin Solid Films, 453-45 (2). pp. 471-476. ISSN 0040-6090

Pinkerton, A. J. and Li, L. (2005) Multiple-layer laser deposition of steel components using gas- and water-atomised powders: the differences and the mechanisms leading to them. Applied Surface Science, 247 (1-4). pp. 175-181. ISSN 0169-4332

Pinkerton, A. J. and Li, L. (2003) Process characteristics and effects of gas- and water-atomized stainless steel powders in laser-based rapid tooling. Journal of Laser Applications, 15 (3). pp. 172-178. ISSN 1042-346X

Pinkerton, A. J. and Li, L. (2003) Rapid prototyping using direct laser deposition - the effect of powder atomization type and flowrate. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 217 (6). pp. 741-752. ISSN 0954-4054

Pinkerton, A. J. and Li, L. (2004) The behaviour of water- and gas-atomised tool steel powders in coaxial laser freeform fabrication. Thin Solid Films, 453-45 (2). pp. 600-605. ISSN 0040-6090

Pinkerton, A. J. and Li, L. (2004) The development of temperature fields and powder flow during laser direct metal deposition wall growth. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 218 (5). pp. 531-541. ISSN 0954-4062

Pinkerton, A. J. and Li, L. (2003) The effect of laser pulse width on multiple-layer 316L steel clad microstructure and surface finish. Applied Surface Science, 208-20. pp. 411-416. ISSN 0169-4332

Pinkerton, A. J. and Li, L. (2003) An investigation of the effect of pulse frequency in laser multiple-layer cladding of stainless steel. Applied Surface Science, 208-20. pp. 405-410. ISSN 0169-4332

Pinkerton, A. J. and Li, L. (2004) The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects). International Journal of Machine Tools and Manufacture, 44 (6). pp. 573-584. ISSN 0890-6955

Pinkerton, A. J. and Wang, W. and Li, L. (2008) Component repair using laser direct metal deposition. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222 (7). pp. 827-836. ISSN 0954-4054

Pinkerton, Amdrew J. and Li, L. (2003) Effects of powder geometry and composition in coaxial laser deposition of 316L steel for rapid prototyping. CIRP Annals - Manufacturing Technology, 52 (1). pp. 181-184. ISSN 0007-8506

Pinkerton, Andrew J. (2007) An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition. Journal of Physics D: Applied Physics, 40 (23). pp. 7323-7334. ISSN 0022-3727

Pinkerton, Andrew J. and Karadge, Mallikarjun and Syed, Waheed Ul Haq and Li, Lin (2006) Thermal and microstructural aspects of the laser direct metal deposition of waspaloy. Journal of Laser Applications, 18 (3). pp. 216-226. ISSN 1042-346X

Pinkerton, Andrew J. and Li, L. (2005) Direct additive laser manufacturing using gas- and water-atomised H13 tool steel powders. International Journal of Advanced Manufacturing Technology, 25 (5-6). pp. 471-479. ISSN 0268-3768

Pinkerton, Andrew J. and Li, L. (2005) An experimental and numerical study of the influence of diode laser beam shape on thin wall direct metal deposition. Journal of Laser Applications, 17 (1). pp. 47-56. ISSN 1042-346X

Pinkerton, Andrew J. and Syed, Waheed Ul Haq and Li, Lin (2007) Theoretical analysis of the coincident wire-powder laser deposition process. Journal of Manufacturing Science and Engineering, 129 (6). pp. 1019-1027. ISSN 1087-1357

Pinto, Domenico and Obayya, Salah (2008) Accurate perfectly matched layer finite-volume time-domain method for photonic bandgap devices. IEEE Photonics Technology Letters, 20 (5). pp. 339-341. ISSN 1041-1135

Pinto, Domenico and Obayya, Salah (2007) Improved complex envelope alternative direction implicit finite difference time domain method for photonic bandgap cavities. Journal of Lightwave Technology, 25 (1). pp. 440-447. ISSN 1558-2213

Pinto, Domenico and Obayya, Salah (2008) Nonlinear finite-volume time-domain analysis of photonic crystal-based resonant cavities. IET Optoelectronics, 2 (6). pp. 254-261. ISSN 1751-8768

Pinto, Domenico and Obayya, Salah and Rahman, B and Grattan, K (2006) FDTD analysis of nonlinear bragg grating based devices. Optical and Quantum Electronics, 38 (15). pp. 1217-1235. ISSN 1572-817X

Price, Laura and Young, Peter C. and Berckmans, Daniel and Janssens, Karl and Taylor, C. James (1999) Data-Based Mechanistic Modelling (DBM) and control of mass and energy transfer in agricultural buildings. Annual Reviews in Control, 23 (1). pp. 71-82. ISSN 1367-5788

Price, R. A. and Benson, C. and Joyce, Malcolm J. and Rogers, K. (2004) Development of a linear array for intracavitary in vivo dosimetry during external beam radiotherapy and brachytherapy. IEEE Transactions on Nuclear Science, 51 (4). pp. 1420-1426. ISSN 0018-9499

Price, Robert A. and Benson, Chris and Joyce, Malcolm J. and Kestell, David J. and Silvie, Jon (2004) Novel developments in the MOSFET dosemeter for neutron dosimetry applications. Radiation Protection Dosimetry, 110 (1-4). pp. 283-290. ISSN 1742-3406

Qin, Q H and Qu, C Y and Ye, J Q (2005) Thermo electroelastic solutions for surface bone remodeling under axial and transverse loads. Biomaterials, 26 (33). pp. 6798-6810. ISSN 0142-9612

Qin, Q H and Ye, J Q (2004) Thermoelectroelastic solutions for internal bone remodeling under axial and transverse loads. International Journal of Solids and Structures, 41 (9-10). pp. 2447-2460. ISSN 0020-7683

Qureshi, Jawed and Lam, Dennis and Ye, Jianqiao (2011) Effect of shear connector spacing and layout on the shear connector capacity in composite beams. Journal of Constructional Steel Research, 67 (4). pp. 706-719. ISSN 0143-974X

Qureshi, Jawed and Lam, Dennis and Ye, Jianqiao (2011) The influence of profiled sheeting thickness and shear connector's position on strength and ductility of headed shear connector. Engineering Structures, 33 (5). pp. 1643-1656. ISSN 0141-0296

Rahmati, M. T. and Aggidis, George A. and Zangeneh, M. (2008) An inverse approach for airfoil design. Advances in Fluid Mechanics, 59. pp. 35-44.

Rakheja, Subhash and Cao, Dongpu and Wang, Zhanqi (2011) Urban bus driver ride and road-friendliness. Part I: model development and role of operating parameters. International Journal of Vehicle Design, 57 (4). pp. 305-332. ISSN 0143-3369

Rennie, Allan and Bennett, Graham R. (2000) Simulation and manufacture of wax toolfaces for the creation of silicone rubber tools using Magics™ RP software. International Journal of Engineering Simulation, 1 (3). pp. 24-30. ISSN 1468-1137

Rennie, Allan E. W. and Bennett, G. and Bocking, C. and Jacobson, D. (2002) The Fabrication of Electronic Packages from High Silicon Aluminium Alloys Using Thin Shell Electroformed (TSE) EDM Electrodes. Transactions of the Institute of Metal Finishing, 80 (3). pp. 92-96. ISSN 0020-2967

Rennie, Allan E. W. and Bocking, Chris E. and Bennett, Graham R. (2001) Electroforming of Rapid Prototyping Mandrels for Electro-Discharge Machining Electrodes. Journal of Materials Processing Technology, 110 (2). pp. 186-196.

Richardson, Andrew and De Masi, B. and Rosing, R. and Wang, C. (2004) Construction of Nonlinear Dynamic MEMS Component Models Using Cosserat Theory. Analog Integrated Circuits and Signal Processing, 40 (2). pp. 117-130. ISSN 1573-1979

Richardson, Andrew and Kerkhoff, H G and Zhang, X. and Mailly, F. and Nouet, P. and Liu, Hongyuan (2008) A Dependable Microelectronic Peptide Synthesizer Using Electrode Data. VLSI Design, 2008 (n/a). ISSN 1065-514X

Richardson, Andrew M. D. and Bailey, Chris and Dumas, Norbert and Yannou, Jean Marc (2007) System in Package Technology - Design for Manufacture Challenges. Circuit World, 33 (1). pp. 36-46.

Richardson, Andrew M. D. and Bunyan, R. and Mathias, H. and Nouet, P. (2007) Sensor Testing Through Bias Superposition. Sensors and Actuators A: Physical, 136 (1). pp. 441-455. ISSN 0924-4247

Richardson, Andrew M. D. and Ferraris, Eleonora and Fassi, Irene and De Masi, Biagio and Rosing, Richard (2006) A capacitance and optical method for the static and dynamic characterization of micro electro mechanical systems (MEMS) devices. Microsystem Technologies, 12 (10-11). pp. 1053-1061. ISSN 0946-7076

Richardson, Andrew M. D. and Solomon, P. and El-Fatatry, A. (2006) MNT needs methodologies and software tools. MST News (VDI/VDE Technologiezentrum Informationstechnic), 2. pp. 16-35. ISSN 0948-3128

Roberts, Peter E. and Joyce, Malcolm J. and Philpott, Claire (2004) You talk – but what does it type. Speech and Language Therapy in Practice. pp. 16-19. ISSN 1368-2105

Rosing, R. and Lechner, A. and Richardson, A. M. D. and Dorey, A. P. (2000) Fault simulation and modelling of microelectromechanical systems. IEE Journal on Computing and Control Engineering, 11 (5). pp. 242-250.

SOLDATOS, K P and Ye, Jianqiao (1995) Axisymmetrical static and dynamic analysis of laminated hollow cylinders composed of monoclinic elastic layers. Journal of Sound and Vibration, 184 (2). pp. 245-259. ISSN 0022-460X

SOLDATOS, K P and Ye, Jianqiao (1994) Three-dimensional static, dynamic, thermoelastic and buckling analysis of homogeneous and laminated composite cylinders. Composite Structures, 29 (2). pp. 131-143. ISSN 0263-8223

Safdar, Shakeel and Pinkerton, A. J. and Li, Lin and Sheikh, Mohammed and Withers, Philip (2013) An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys. Applied Mathematical Modelling, 37 (3). pp. 1187-1195. ISSN 0307-904X

Samsonov, S. V. and Phelps, A.D.R. and Bratman, V. L. and Burt, G. and Denisov, G. G. and Cross, A. W. and Ronald, K. and He, W. and Yin, H. (2004) Compression of Frequency-Modulated Pulses using Helically Corrugated Waveguides and Its Potential for Generating Multigigawatt rf Radiation. Physical Review Letters, 92 (11). 118301 -118301.

Satyanarayana, B.S. and Peng, X.L. and Adamopoulos, George and Robertson, J. and Milne, W.I. and Clyne, T.W. (2000) Very low field electron emission from hot filament CVD grown microcrystalline diamond. MRS Online Proceedings Library, 621. Q531-Q537. ISSN 0272-9172

Saunders, G. D. and Walton, P. H. and Joyce, M. J. and Port, S. N. (2000) A selective uranium extraction agent prepared by polymer imprinting. Chemical Communications, 4. pp. 273-274. ISSN 1364-548X

Schmitt, N. F. and Morgan, R. and Chandy, R. P. and Scully, P. J. and Lewis, E. (1995) Flow sensor using optical fibre strain gauges. Proceedings of SPIE, 2508 (266). pp. 266-276. ISSN 0277-786X

Scholes, S. C. and Green, S. M. and Unsworth, A. (2002) Nanotribological characterisation of alumina femoral heads using an atomic force microscope. Key Engineering Materials, 218-22. pp. 543-548. ISSN 1013-9826

Scholes, S. C. and Green, S. M. and Unsworth, A. (2004) THE WEAR OF ALUMINA-ON-ALUMINA TOTAL HIP PROSTHESES. Journal of Bone and Joint Surgery, British Volume, 86-B (SUPP I). p. 403.

Scholes, S. C. and Green, S. M. and Unsworth, A. (2001) The friction and lubrication of alumina-on-alumina total hip prostheses - The effect of radial clearance and wear testing. Key Engineering Materials, 218-22. pp. 535-540. ISSN 1013-9826

Scholes, S. C. and Green, S. M. and Unsworth, A. (2001) The wear of metal-on-metal total hip prostheses measured in a hip simulator. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 215 (6). pp. 523-530. ISSN 0954-4119

Selwood, M. J. and Monk, S. D. (2011) Construction issues surrounding a portable four-band neutron detection system. Radiation Protection Dosimetry, 144 (1-4). pp. 249-252. ISSN 1742-3406

Selwood, Mark J and Monk, Stephen David (2012) Development of a portable isotropic neutron spectrometer. Applied Radiation and Isotopes, 70 (7). pp. 1145-1149. ISSN 0969-8043

Seviour, Rebecca and Kosch, M. and Honary, F. (2003) Identification of clouds and aurorae in optical data images. New Journal of Physics, 5. 6.1-6.7. ISSN 1367-2630

Seward, D. W. and Garman, A. (1996) The software development process for intelligent robots. Computing and Control Engineering, 7 (2). pp. 86-92.

Seward, D. W. and Margrave, F. W. and Bradshaw, A. (1996) The anatomy of a humanoid robot. Robotica, 14 (4). pp. 437-443. ISSN 0263-5747

Seward, D. W. and Pace, C. and Morrey, R. and Sommerville, I. (2000) Safety analysis of autonomous excavator functionality. Reliability Engineering and System Safety, 70 (1). pp. 29-39.

Seward, D. W. and Quayle, S. (1997) LUCIE - Lancaster University computerised intelligent excavator. Circuit Cellar - The Magazine For Computer Applications, 79. pp. 67-73.

Seward, D. W. and Scott, J. and Findlay, J. and Kinniburgh, H. (1997) The automation of piling rig positioning using satellite GPS. Automation in Construction, 6 (3). pp. 229-240.

Seward, Derek W. (2002) Automating the construction workplace: positioning and navigational factors. Construction Innovation: Information, Process, Management, 2 (3). pp. 167-189. ISSN 1471-4175

Seward, Derek W. and Zeid, Khaled (2004) Graphical programming and the development of construction robots. Computer-Aided Civil and Infrastructure Engineering, 19 (1). pp. 64-80. ISSN 1093-9687

Sezer, H. K. and Li, L. and Schmidt, M. and Pinkerton, A. J. and Anderson, B. and Williams, P. (2006) Effect of beam angle on HAZ, recast and oxide layer characteristics in laser drilling of TBC nickel superalloys. International Journal of Machine Tools and Manufacture, 46 (15). pp. 1972-1982. ISSN 0890-6955

Sezer, H. K. and Pinkerton, Andrew J. and Li, L. and Byrd, P. (2005) An investigation into delamination mechanisms in inclined laser drilling of thermal barrier coated aerospace superalloys. Journal of Laser Applications, 17 (4). pp. 225-234. ISSN 1042-346X

Shaban, E. M. and Ako, S. and Taylor, C. James and Seward, Derek W. (2008) Development of an automated verticality alignment system for a vibro-lance. Automation in Construction, 17 (5). pp. 645-655. ISSN 0926-5805

Shah, Kamran and Pinkerton, Andrew J. and Salman, Ahmad and Li, Lin (2010) Effects of Melt Pool Variables and Process Parameters in Laser Direct Metal Deposition of Aerospace Alloys. Materials and Manufacturing Processes, 25 (12). pp. 1372-1380. ISSN 1042-6914

Sharif, E. and Bell, C. and Morris, P. and Peyton, A. J. (2001) Imaging the transformation of hot strip steel using magnetic techniques. Proceedings of SPIE, 4188. pp. 212-223. ISSN 1996-756X

Sharif, E. and Bell, C. and Morris, P. and Peyton, A. J. (2001) Imaging the transformation of hot strip steel using magnetic techniques. Journal of Electronic Imaging, 10 (3). pp. 669-678. ISSN 1017-9909

Sheng, H Y and Ye, J Q (2004) Free-edge effect in cross-ply laminated plates under a uniform extension. Structural Engineering and Mechanics, 18 (3). pp. 377-388. ISSN 1225-4568

Sheng, H Y and Ye, J Q (2005) State space solution for axisymmetric bending of angle-ply laminated cylinder with clamped edges. Composite Structures, 68 (1). pp. 119-128. ISSN 0263-8223

Sheng, H Y and Ye, J Q (2002) A semi-analytical finite element for laminated composite plates. Composite Structures, 57 (1-4). pp. 117-123. ISSN 0263-8223

Sheng, H Y and Ye, J Q (2002) A state space finite element for laminated composite plates. Computer Methods in Applied Mechanics and Engineering, 191 (37-38). pp. 4259-4276. ISSN 0045-7825

Sheng, H Y and Ye, J Q (2003) A three-dimensional state space finite element solution for laminated composite cylindrical shells. Computer Methods in Applied Mechanics and Engineering, 192 (22-24). pp. 2441-2459. ISSN 0045-7825

Sheng, H. Y. and Wang, H. and Ye, J. Q. (2007) State space solution for thick laminated piezoelectric plates with clamped and electric open-circuited boundary conditions. International Journal of Mechanical Sciences, 49 (7). pp. 806-818. ISSN 0020-7403

Sheng, Yong and Yang, Dongmin and Tan, Yuanqiang and Ye, Jianqiao (2010) Microstructure effects on transverse cracking in composite laminae by DEM. Composites Science and Technology, 70 (14). pp. 2093-2101. ISSN 0266-3538

Shippen, Alan and Joyce, Malcolm J. (2010) Profiling the depth of caesium-137 contamination in concrete via a relative linear attenuation model. Applied Radiation and Isotopes, 68 (4-5). pp. 631-634. ISSN 0969-8043

Shippen, David I. and Joyce, Malcolm J. and Aspinall, Michael D. (2010) A Wavelet Packet Transform Inspired Method of Neutron-Gamma Discrimination. IEEE Transactions on Nuclear Science, 57 (5). pp. 2617-2624. ISSN 0018-9499

Skeldon, K. D. and Gibson, G. M. and Wyse, C. A. and McMillan, L. C. and Monk, S. D. and Longbottom, C. and Padgett, M. J. (2005) Development of high-resolution real-time sub-ppb ethane spectroscopy and some pilot studies in life science. Applied Optics, 44 (22). pp. 4712-4721. ISSN 2155-3165

Skeldon, K. D. and McMillan, L. C. and Wyse, C. A. and Monk, S. D. and Gibson, G. and Patterson, C. and France, T. and Longbottom, C. and Padgett, M. J. (2006) Application of laser spectroscopy for measurement of exhaled ethane in patients with lung cancer. Respiratory Medicine, 100 (2). pp. 300-306. ISSN 1532-3064

Smith, Jeremy and Bashir, Aneeqa and Adamopoulos, George and Anthony, John E. and Bradley, Donal D. C. and Hamilton, R. and Heeney, Martin and McCulloch, Iain and Anthopoulos, Thomas D. (2010) Air-Stable Solution-Processed Hybrid Transistors with Hole and Electron Mobilities Exceeding 2 cm(2) V-1 s(-1). Advanced Materials, 22 (32). pp. 3598-3602. ISSN 0935-9648

Smith, Paul and Lupeanu, Mihaela and Rennie, Allan (2012) Additive manufacturing technology and material selection for direct manufacture of products based on computer aided design geometric feature analysis. International Journal of Materials and Structural Integrity, 6 (2-4). pp. 96-110. ISSN 1745-0055

Spooner, E. and Taverner, P. J. and Mueller, M. A. and Baker, N. J. and Brooking, P. R. M. (2004) Vernier hybrid machines for compact drive applications. Proceedings of the 2nd IEE international conference on power electronics, machines and drives, 1 (31). pp. 452-457.

Syed, W. U. H. and Pinkerton, A. J. and Li, L (2005) A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping. Applied Surface Science, 247 (1-4). pp. 268-276. ISSN 0169-4332

Syed, W. U. H. and Pinkerton, A. J. and Li, L. (2006) Simultaneous wire- and powder-feed direct metal deposition: An investigation of the process characteristics and comparison with single-feed methods. Journal of Laser Applications, 18 (1). pp. 65-72. ISSN 1042-346X

Syed, Waheed Ul Haq and Pinkerton, Andrew J. and Li, L. (2006) Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping. Applied Surface Science, 252 (13). pp. 4803-4808. ISSN 0169-4332

Syed, Waheed Ul Haq and Pinkerton, Andrew J. and Liu, Zhu and Li, Lin (2007) Coincident wire and powder deposition by laser to form compositionally graded material. Surface and Coatings Technology, 201 (16-17). pp. 7083-7091. ISSN 0257-8972

Syed, Waheed Ul Haq and Pinkerton, Andrew J. and Liu, Zhu and Li, Lin (2007) Single-step laser deposition of functionally graded coating by dual 'wire-powder' or 'powder-powder' feeding:a comparative study. Applied Surface Science, 253 (19). pp. 7926-7931. ISSN 0169-4332

Tapp, H. S. and Peyton, A. J. and Kemsley, E. K. and Wilson, R. H. (2003) Chemical engineering applications of electrical process tomography. Journal of Sensors and Actuators, 92. pp. 17-24.

Taylor, C. James (2004) Environmental test chamber for the support of learning and teaching in intelligent control. International Journal of Electrical Engineering Education, 41 (4). pp. 375-387. ISSN 0020-7209

Taylor, C. James and Chotai, Arun and Young, Peter C. (2009) Nonlinear control by input-output state variable feedback pole assignment. International Journal of Control, 82 (6). pp. 1029-1044. ISSN 0020-7179

Taylor, C. James and Chotai, Arun and Young, Peter C. (2000) State space control system design based on non-minimal state-variable feedback: further generalisation and unification results. International Journal of Control, 73 (14). pp. 1329-1345. ISSN 0020-7179

Taylor, C. James and Leigh, P. and Chotai, Arun and Young, Peter C. and Vranken, E. and Berckmans, D. (2004) Cost effective combined axial fan and throttling valve control of ventilation rate. IEE Proceedings - Control Theory and Applications, 151 (5). pp. 577-584. ISSN 1350-2379

Taylor, C. James and Leigh, P. A. and Price, L. and Young, P. C. and Berckmans, D. and Vranken, E. (2004) Proportional-integral-plus (PIP) control of ventilation rate in agricultural buildings. Control Engineering Practice, 12 (2). pp. 225-233. ISSN 0967-0661

Taylor, C. James and McCabe, A. P. and Young, Peter C. and Chotai, Arun (2000) Proportional-integral-plus (PIP) control of the ALSTOM gasifier problem. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 214 (6). pp. 469-481. ISSN 0959-6518

Taylor, C. James and McKenna, Paul G. and Young, Peter C. and Chotai, Arun and Mackinnon, Mike (2004) Macroscopic traffic flow modelling and ramp metering control using Matlab/Simulink. Environmental Modelling and Software, 19 (10). pp. 975-988. ISSN 1364-8152

Taylor, C. James and Pedregal, Diego J. and Young, Peter C. and Tych, Wlodek (2007) Environmental Time Series Analysis and Forecasting with the Captain Toolbox. Environmental Modelling and Software, 22 (6). pp. 797-814. ISSN 1364-8152

Taylor, C. James and Seward, D. (2010) Control of a dual-arm robotic manipulator. Nuclear Engineering International, 55 (673). pp. 24-26. ISSN 0029-5507

Taylor, C. James and Shaban, E. (2006) Multivariable proportional-integral-plus (PIP) control of the ALSTOM nonlinear gasifier simulation. IEE Proceedings - Control Theory and Applications, 153 (3). pp. 277-285. ISSN 1350-2379

Taylor, C. James and Shaban, E. and Stables, M. and Ako, S. (2007) Proportional-integral-plus control applications of state-dependent parameter models. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 221 (I7). pp. 1019-1032. ISSN 0959-6518

Taylor, C. James and Stables, M. A. (2006) Nonlinear control of ventilation rate using state dependent parameter models. Biosystems Engineering, 95 (1). pp. 7-18. ISSN 1537-5110

Taylor, James and Chotai, Arunkumar and Cross, Philip (2012) Non–minimal state variable feedback decoupling control for multivariable continuous–time systems. International Journal of Control, 85 (6). pp. 722-734. ISSN 0020-7179

Thomas, A and Aggidis, George A. (2007) Review and state of the art of wave energy and wave energy converters, IMechE, Fluid Machinery for Developing Engineers, Cranfield, (Invited Paper). IMechE Conference Transactions, v. 1.

Thomas, Stuart and Adamopoulos, George and Anthopoulos, Thomas (2013) Be-doped ZnO thin-film transistors and circuits fabricated by spray pyrolysis in air. Journal of Display Technology, 9 (9). pp. 688-693. ISSN 1551-319X

Tinta, D. and Petrovic, J. and Benka, U. and Jurivic, D. and Rakar, A. and Zele, H. and Tavar, J and Rejec, J. and Stefanvoska, Aneta (2005) Fault diagnosis of vacuum cleaner motors. Control Engineering Practice, 13 (2). pp. 177-187. ISSN 0967-0661

Turnbull, S. R. and Dawson, D. (1998) The effects of freely suspended loads on the dynamic behaviour of semi-trailers onboard ships. Transactions of RINA. ISSN 0035-8967

Turnbull, S. R. and Dawson, D. (1997) The securing of rigid semi-trailers on roll-on/roll-off ships. International Journal of Mechanical Sciences, 39 (1). pp. 1-14.

Turvey, G. J. (1997) Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections. Composite Structures, 38 (1). pp. 3-16.

Turvey, G. J. (2000) Bolted connections in PFRP structures. Progress in Structural Engineering and Materials, 2 (2). pp. 146-156. ISSN 1528-2716

Turvey, G. J. (1996) Effect of load position on the lateral buckling of pultruded GRP cantilevers - correlations between experiment and theory. Composite Structures, 35 (1). pp. 33-47.

Turvey, G. J. (1999) Flexure of pultruded GRP beams with semi-rigid end connections. Composite Structures, 47 (1). pp. 571-580.

Turvey, G. J. (1996) Lateral buckling tests on rectangular cross-section pultruded GRP cantilever beams. Composites Part B: Engineering, 27 (1). pp. 35-42.

Turvey, G. J. (1998) Single-bolt tension joint tests on pultruded GRP plate: effects of the orientation of the tension direction relative to pultrusion direction. Composite Structures, 42 (4). pp. 341-351.

Turvey, G. J. (1998) Torsion tests on pultruded GRP sheet. Composites Science and Technology, 58 (8). pp. 1343-1351.

Turvey, G. J. and Cooper, C. (2000) Semi-rigid column base connections in pultruded GRP frame structures. Computers and Structures, 76 (1-3). pp. 77-88.

Turvey, G. J. and Cooper, C. (1998) Uplift tests on column base connections in pultruded GRP frames. Proceedings of the eighth international conference on composite materials (ECCM-8). pp. 285-292.

Turvey, G. J. and Drinali, H. (1997) Non-linear first yield analysis of circular plates subjected to combined uniform pressure and edge compression. Computers and Structures, 63 (4). pp. 769-773.

Turvey, G. J. and Mulcahy, N. and Widden, M. B. (2000) Experimental and computed natural frequencies of square pultruded GRP plates: effects of anisotropy, hole size ratio and edge support conditions. Composite Structures, 50 (4). pp. 391-403.

Turvey, G. J. and Osman, M. Y. (1996) Elastic and initial flexural failure analysis of unsymmetrically laminated cross-ply strips. Composites Part B: Engineering, 27 (5). pp. 505-518.

Turvey, G. J. and Salehi, M. (1997) Circular plates with one diametral stiffener: an elastic large deflection analysis. Computers and Structures, 63 (4). pp. 775-783.

Turvey, G. J. and Salehi, M. (1998) Elastic large deflection analysis of stiffened annular sector plates. International Journal of Mechanical Sciences, 40 (1). pp. 51-70.

Turvey, G. J. and Salehi, M. (2001) Elasto-plastic response of uniformly loaded sector plates: full-section yield model predictions and spread of plasticity. Computers and Structures, 79 (26-28). pp. 2335-2348.

Turvey, Geoffrey (2006) Structural analysis of CFRP-plated pultruded GRP beams. Proceedings of the ICE - Structures and Buildings, 159 (SB2). pp. 65-75. ISSN 1751-7702

Turvey, Geoffrey and Wang, P. (2007) Failure of pultruded GRP single-bolt tension joints under hot-wet conditions. Composite Structures, 77 (4). pp. 514-520.

Turvey, Geoffrey and Wang, P. (2003) Open-hole tension strength of pultruded GRP plate. Proceedings of the ICE - Structures and Buildings, 156 (1). pp. 93-101. ISSN 1751-7702

Turvey, Geoffrey and Zhang, Y. (2006) Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests. Composites Part A: Applied Science and Manufacturing, 37 (2). pp. 152-164. ISSN 1359-835X

Turvey, Geoffrey and Zhang, Y. (2006) A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns. Computers and Structures, 84 (22-23). pp. 1527-1537.

Turvey, Geoffrey J. and Cooper, C. (2004) Review of tests on bolted joints between pultruded GRP profiles. Proceedings of the Institute of Civil Engineers Civil Engineering, 157 (3). pp. 211-233.

Turvey, Geoffrey J. and Wang, P. (2001) Effects of temperature on the structural integrity of bolted joints in pultrusions. Composites in constructions. pp. 171-176.

Turvey, Geoffrey J. and Zhang, Y. (2005) Tearing failure of web-flange junctions in pultruded GRP profiles. Composites Part A: Applied Science and Manufacturing, 36 (2). pp. 309-317. ISSN 1359-835X

Wan-Daud, W. A. and Peyton, A. J. and Tapp, H. S. and Crescenzo, E. (2003) Towards an integrated system using multiple cameras and structured lighting for the measurement of human body shape and volume. Biométrie Humaine et Anthropologie, 21. pp. 121-127. ISSN 1279-7863

Wang, Guangming and Ma, Xiandong and Hua, Tianjiang and Zhang, Daibing (2013) Experimental and analytical study on factors influencing biomimetic undulating fin propulsion performance based on orthogonal experimental design. Advanced Robotics, 27 (8). pp. 597-609. ISSN 0169-1864

Wang, Hongxin and Zha, Xiaoxiong and Ye, Jianqiao (2012) Dynamic response of metallic sandwich panles under blast loadings. International Journal of Structural Stability and Dynamics, 12 (3). -. ISSN 0219-4554

Wang, Liuping and Young, Peter C. and Gawthrop, Peter and Taylor, C. James (2009) Non-minimal state space model-based continuous-time model predictive control with constraints. International Journal of Control, 82 (6). pp. 1122-1137. ISSN 0020-7179

Weaver, J. A. and Joyce, M. J. and Peyton, A. J. and Roskell, J. (2002) Recent improvements to a transportable neutron spectrometer (TNS). Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 476 (1-2). pp. 143-148.

Weaver, J. A. and Joyce, M. J. and Peyton, A. J. and Roskell, J. and Armishaw, M. J. (2001) Unique broad-spectrum neutron sensing instrument. Review of Scientific Instruments, 72 (4). pp. 2043-2047. ISSN 1089-7623

Weerasekera, Roshan and Pamunuwa, Dinesh B. and Zheng, Li-Rong and Tenhunen, Hannu (2008) Minimal-power, delay-balanced smart repeaters for global interconnects in the nanometer regime. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 16 (5). pp. 589-593. ISSN 1063-8210

Widden, M. B. and French, M. J. and Aggidis, George A. (2008) Analysis of a pitching-and-surging wave-energy converter that reacts against an internal mass, when operating in regular sinusoidal waves. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 222 (Number). pp. 153-161. ISSN 1475-0902

Widden, Martin B. and French, M. J. and Aggidis, George A. (2005) Analysis of PS frog pitching and surging wave-energy converter operating in regular sinusoidal waves. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment. ISSN 1475-0902

Widden, Martin B. and French, M. J. and Aggidis, George A. (2004) Economic energy from low head water by conversion to air pressure. IMechE Conference Transactions, v. 6. pp. 41-49.

Wu, Z J and Ye, J Q (2003) Strength and fracture resistance of FRP reinforced concrete flexural members. Cement and Concrete Composites, 25 (2). pp. 253-261. ISSN 0958-9465

Wu, Z J and Ye, J Q and Cabrera, J G (2000) 3D analysis of stress transfer in the micromechanics of fiber reinforced composites by using an eigen-function expansion method. Journal of the Mechanics and Physics of Solids, 48 (5). pp. 1037-1063. ISSN 0022-5096

Wu, Z J and Ye, J Q and Cabrera, J G (2000) Interfacial effects on stress transfer in fiber-reinforced composites. Mechanics of Composite Materials and Structures, 7 (4). pp. 315-330. ISSN 1075-9417

Xu, Z. and Kotsov, Denis and Richardson, Andrew and Li, L. and Begbie, Mark (2010) Design and simulation of a multi-function MEMS sensor for health and usage monitoring. Proceedings of IEEE Prognostics & System Health Management Conference. pp. 1-7.

Yang, Dongmin and Sheng, Yong and Ye, Jianqiao and Tan, Yuanqiang (2010) Discrete element modeling of the microbond test of fiber reinforced composite. Computational Materials Science, 49 (2). pp. 253-259. ISSN 0927-0256

Yang, Dongmin and Sheng, Yong and Ye, Jianqiao and Tan, Yuanqiang (2011) Dynamic simulation of crack initiation and propagation in cross-ply laminates by DEM. Composites Science and Technology, 71 (11). pp. 1410-1418. ISSN 0266-3538

Yang, Dongmin and Sheng, Yong and Ye, Jianqiao and Tan, Yuanqiang and Jiang, Shengqiang (2011) Numerical Modelling of Damage Progression in Single-fiber Composite under Axial Tension. Advanced Materials Research, 268-27. pp. 280-285. ISSN 1662-8985

Yang, Dongmin and Tan, Y. Q. and Ye, Jianqiao and Sheng, Yong (2009) Three-Dimensional Discrete Element Modeling of the Damage Behaviour of Cross-Ply Laminate under Low-Velocity Impact. Civil-Comp Proceedings, 91. ISSN 1759-3433

Yang, Dongmin and Tan, Yuanqiang and Ye, Jianqiao and Sheng, Yong (2008) A numerical study of elastic behaviour of Carbon- epoxy lamina under uni-axial compression using the DEM. Civil-Comp Proceedings, 88. ISSN 1759-3433

Yang, Dongmin and Ye, Jianqiao and Tan, Yuanqiang and Sheng, Yong (2011) Modeling progressive delamination of laminated composites by discrete element method. Computational Materials Science, 50 (3). pp. 858-864. ISSN 0927-0256

Yang, J and Ye, J Q (2002) Dynamic elastic local buckling of piles under impact loads. Structural Engineering and Mechanics, 13 (5). pp. 543-556. ISSN 1225-4568

Yang, J and Ye, J Q (2002) Interfacial stresses in plated beams with cracks. Composite Structures, 57 (1-4). pp. 125-134. ISSN 0263-8223

Yang, Jian and Ye, Jianqiao (2010) An improved closed-form solution to interfacial stresses in plated beams using a two-stage approach. International Journal of Mechanical Sciences, 52 (1). pp. 13-30. ISSN 0020-7403

Yang, Jian and Ye, Jianqiao and Bao, Yiwang (2008) Stress analysis of cross-ply composite laminates with transverse cracks. Mechanics of Composite Materials, 44 (6). pp. 557-580. ISSN 0191-5665

Yang, Jian and Ye, Jianqiao and Niu, Zhongrong (2007) Interfacial shear stress in FRP-plated RC beams under symmetric loads. Cement and Concrete Composites, 29 (5). pp. 421-432. ISSN 0958-9465

Yang, Jian and Ye, Jianqiao and Niu, Zhongrong (2008) Simplified solutions for the stress transfer in concrete beams bonded with FRP plates. Engineering Structures, 30 (2). pp. 533-545. ISSN 0141-0296

Yavuz, H. and Bradshaw, A. (2002) On the design and implementation of a mobile robot control system. Journal of Intelligent and Robotic Systems, 34 (1). pp. 1-26. ISSN 0921-0296

Ye, Fangwei and Mihalache, Dumitru and Hu, B. and Panoiu, Nicolae C. (2010) Subwavelength vortical plasmonic lattice solitons. Optics Letters, 36 (7). pp. 1179-1181. ISSN 0146-9592

Ye, J Q (1997) Axisymmetric vibration analysis of laminated hollow cylinders with ring stiffeners. Composite Structures, 38 (1-4). pp. 151-156. ISSN 0263-8223

Ye, J Q (1997) Axisymmetric vibration of laminated annular plates composed of transversely isotropic layers. Journal of Sound and Vibration, 205 (2). pp. 250-256. ISSN 0022-460X

Ye, J Q (1999) Buckling analysis of angle-ply multilaminated long hollow cylinders. Journal of Engineering Mechanics, 125 (8). pp. 964-969. ISSN 0733-9399

Ye, J Q (2000) Closure to “Buckling Analysis of Angle‐Ply Multilaminated Long Hollow Cylinders”. Journal of Engineering Mechanics, 126 (8). p. 887. ISSN 0733-9399

Ye, J Q (2001) Decay rate of edge effects in cross-ply-laminated hollow cylinders. International Journal of Mechanical Sciences, 43 (2). pp. 455-470. ISSN 0020-7403

Ye, J Q (2001) Edge effects in angle-ply laminated hollow cylinders. Composite Structures, 52 (2). pp. 247-253. ISSN 0263-8223

Ye, J Q (1998) Error bounds on the eigenvalues of a linearized dynamic stiffness matrix. Communications in Numerical Methods in Engineering, 14 (4). pp. 305-312. ISSN 1069-8299

Ye, J Q (2001) Interfacial shear transfer of RC beams strengthened by bonded composite plates. Cement and Concrete Composites, 23 (4-5). pp. 411-417. ISSN 0958-9465

Ye, J Q (1997) A three-dimensional free vibration analysis of cross-ply laminated rectangular plates with clamped edges. Computer Methods in Applied Mechanics and Engineering, 140 (3-4). pp. 383-392. ISSN 0045-7825

Ye, J Q and Sheng, H Y (2003) Free-edge effect in cross-ply laminated hollow cylinders subjected to axisymmetric transverse loads. International Journal of Mechanical Sciences, 45 (8). pp. 1309-1326. ISSN 0020-7403

Ye, J Q and Sheng, H Y and Qin, Q H (2004) A state space finite element for laminated composites with free edges and subjected to transverse and in-plane loads. Computers and Structures, 82 (15-16). pp. 1131-1141. ISSN 0045-7949

Ye, J Q and Soldatos, K P (1996) Three-dimensional vibration of laminated composite plates and cylindrical panels with arbitrarily located lateral surfaces point supports. International Journal of Mechanical Sciences, 38 (3). pp. 271-281. ISSN 0020-7403

Ye, J Q and Soldatos, K P (1997) Three-dimensional vibrations of cross-ply laminated hollow cylinders with clamped edge boundaries. Journal of Vibration and Acoustics, 119 (3). pp. 317-323. ISSN 1048-9002

Ye, J Q and Williams, F W (1997) Quadratic representation of a nonlinear dynamic stiffness matrix and related eigenvalue problems. Computer Methods in Applied Mechanics and Engineering, 146 (3-4). pp. 313-323. ISSN 0045-7825

Ye, J Q and Wu, Z J (2000) Micro-mechanical analysis of splitting failure in concrete reinforced with fiber reinforced plastic rods. Cement and Concrete Composites, 22 (4). pp. 243-251. ISSN 0958-9465

Ye, Jianqiao and Lam, Dennis and Zhang, Daxu (2010) Initiation and propagation of transverse cracking in composite laminates. Computational Materials Science, 47 (4). pp. 1031-1039. ISSN 0927-0256

Ye, Jianqiao and Soldatos, K P (1994) Three-dimensional stress analysis of orthotropic and cross-ply laminated hollow cylinders and cylindrical panels. Computer Methods in Applied Mechanics and Engineering, 117 (3-4). pp. 331-351. ISSN 0045-7825

Ye, Jianqiao and Soldatos, K P (1994) Three-dimensional vibration of laminated cylinders and cylindrical panels with symmetric or antisymmetric cross-ply lay-up. Composites Part B: Engineering, 4 (4). pp. 429-444. ISSN 0961-9526

Ye, Jianqiao and Zhang, Daxu (2012) Prediction of failure envelopes and stress–strain curves of fiber composite laminates under triaxial loads. Journal of Composite Materials, 46 (19-20). pp. 2417-2430. ISSN 1530-793X

Yin, Wuliang and Peyton, A. J. and Dickinson, Stephen J. (2004) Simultaneous measurement of distance and thickness of a thin metal plate with an electromagnetic sensor using a simplified model. IEEE Transactions on Instrumentation and Measurement, 53 (4). pp. 1335-1338. ISSN 0018-9456

Yu, Min and Zha, Xiaoxiong and Ye, Jianqiao (2010) The influence of joints and composite floor slabs on effective tying of steel structures in preventing progressive collapse. Journal of Constructional Steel Research, 66 (3). pp. 442-451. ISSN 0143-974X

Yu, Min and Zha, Xiaoxiong and Ye, Jianqiao and Li, Yi (2010) Fire responses and resistance of concrete-filled steel tubular frame structures. International Journal of Structural Stability and Dynamics, 10 (2). pp. 253-271. ISSN 0219-4554

Yu, Min and Zha, Xiaoxiong and Ye, Jianqiao and Li, Yuting (2013) A unified formulation for circle and polygon concrete-filled steel tube columns under axial compression. Engineering Structures, 49. pp. 1-10. ISSN 0141-0296

Yu, Min and Zha, Xiaoxiong and Ye, Jianqiao and She, Chunyan (2010) A unified formulation for hollow and solid concrete-filled steel tube columns under axial compression. Engineering Structures, 32 (4). pp. 1046-1053. ISSN 0141-0296

Yu, Z. Z. and Peyton, A. J. (1998) Development of sensor arrays for electromagnetic tomography: compensation of large background signal values. Transactions of the Institute of Measurement and Control, 20 (4). pp. 195-202. ISSN 0142-3312

Yu, Z. Z. and Peyton, A. J. and Xu, L. A. and Beck, M. S. (1998) Electromagnetic inductance tomography (EMT): sensor, electronics and image reconstruction for a system with a rotatable parallel excitation. IEE Proceedings Science Measurement and Technology, 145 (1). pp. 20-25.

Zhang, Daxu and Xu, Lihua and Ye, Jianqiao (2013) Prediction of failure envelopes and stress strain curves of fiber composite laminates under triaxial loads: comparison with experimental results. Journal of Composite Materials, 47 (6-7). pp. 763-776. ISSN 1530-793X

Zhang, Daxu and Ye, Jianqiao and Lam, Dennis (2007) Free-edge and ply cracking effect in angle-ply laminated composites subjected to in-plane loads. Journal of Engineering Mechanics, 133 (12). pp. 1268-1277. ISSN 0733-9399

Zhang, Daxu and Ye, Jianqiao and Lam, Dennis (2006) Ply cracking and stiffness degradation in cross-ply laminates under biaxial extension, bending and thermal loading. Composite Structures, 75 (1-4). pp. 121-131. ISSN 0263-8223

Zhang, Daxu and Ye, Jianqiao and Lam, Dennis (2007) Properties degradation induced by transverse cracks in general symmetric laminates. International Journal of Solids and Structures, 44 (17). pp. 5499-5517. ISSN 0020-7683

Zhang, Daxu and Ye, Jianqiao and Sheng, Hong Yu (2006) Free-edge and ply cracking effect in cross-ply laminated composites under uniform extension and thermal loading. Composite Structures, 76 (4). pp. 314-325. ISSN 0263-8223

Book/Report/Proceedings

Bocking, Chris E. and Rennie, Allan, eds. (2012) Rapid Design, Prototyping and Manufacturing:Proceedings of the Thirteenth Conference on. CRDM Ltd. ISBN 978-0-9566643-2-7

Rennie, Allan E. W. and Jacobson, D. M. and Bocking, C., eds. (2002) Rapid Prototyping, Tooling and Manufacturing:Proc. Third National Conference on. Professional Engineering Publishing. ISBN 1-86058-374-1

Bocking, C. E. and Rennie, Allan E. W. and Jacobson, D. M. J., eds. (2006) Rapid design, prototyping and manufacture:proceedings of the seventh national conference on. MJA Print. ISBN 0-948314-494

Aggidis, George A. (2003) Advances of CFD in Fluid Machinery Design /organised by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE). IMechE Event Publications.

Aggidis, George A. (2005) Fluid Machinery for Wave and Tidal Energy – State of the Art and New Developments. Institution of Mechanical Engineers.

Aggidis, George A. (2000) Hydropower developments : new projects and rehabilitation / organized by the Fluid Machinery Committee of the Power Industries Division of the Institution of Mechanical Engineers (IMechE). IMechE seminar publication . Professional Engineering Pub. for the Institution of Mechanical Engineers. ISBN 1860583172

Aggidis, George A. (2004) Second International Symposium on Advanced Materials for Fluid Machinery / organised by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE). IMechE conference transactions . Published by Professional Engineering Publishing. ISBN 1860584411

Aggidis, George A. (2004) Second international symposium centrifugal pumps : the state of the art and new developments / organized by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE). IMechE event publications . Professional Engineering Publishing. ISBN 1860584764

Bradshaw, A. and Counsell, J. M. (1997) Computer aided conceptual design '97 : proceedings of the 1997 Lancaster International Workshop on Engineering Design CACD'97. Lancaster University: Centre for the Study of Environmental Change.. ISBN 1862200262.

Burge, S. E. (1993) Structure and design of manufacturing systems: units 4/5 manufacturing strategy. Open University.

French, M. J. (1994) Invention and evolution : design in nature and engineering, 2nd ed. Cambridge University Press. ISBN 0521469112

Pamunuwa, Dinesh B. (2003) Modelling and analysis of interconnects for deep submicron systems-on-chip. Royal Institute of Technology. ISBN 91-7283-631-8

Rennie, Allan (2005) Virtual Prototyping. N/A.

Rennie, Allan (2006) Virtual Prototyping Phase II. N/A.

Rennie, Allan (2007) Virtual Prototyping Phase III. N/A. (Unpublished)

Ye, Jianqiao (2003) Laminated composite plates and shells:3D modelling. Springer-Verlag. ISBN 1-85223-454-1

Ye, Jianqiao (2008) Structural and Stress Analysis:theories, Tutorial and Examples. Spon Press (Taylor and Francis). ISBN 0-415-36865-0

Conference or Workshop Item

Abram, Thomas and Benachour, Phillip and Vuong, Tu (2009) Development of a Motion Tracking 3D CAD Input System. In: 10th National Conference on Rapid Design, Prototyping and Manufacturing, 2009-06-122009-06-12.

Adamopoulos, George (2011) Li-Doped Zinc oxide Transistors and circuits fabricated by spray deposition in ambient atmosphere. In: 7th International Thin-Film Transistor Conference, 2011-03-03.

Adamopoulos, George (2010) Low-voltage, high-mobility transparent oxide transistors fabricated by spray coating. In: Fifth International Conference on Multiscale Materials Modelling, 2010-10-04.

Adamopoulos, George and Bradley, Donal and Anthopoulos, Thomas (2011) Spray Deposited Lithium-doped Zinc Oxide Thin-film Transistors with Electron Mobility Exceeding 50 cm2/Vs. In: MRS 2010 Fall Meeting, 2010-11-30.

Adams, J. C. and Joyce, Malcolm J. and Mellor, M. (2010) A phantom for research studies of radiologically-contaminated land. In: 2010 IEEE Nuclear Science Symposium, 2010-11-01.

Adams, J. C. and Mellor, M. and Joyce, Malcolm J. (2009) Buried contamination. In: IEEE ANIMMA, 2009-06-072009-06-10.

Adams, Jamie C. and Mellor, Matthew and Joyce, Malcolm J. (2010) Depth profiling of radiological contamination in sand using Principal Component Analysis. In: IEEE NPSS International Workshop on Real Time Measurement, Instrumentation & Control, 2010-06-252010-06-26.

Aggidis, George (2006) Fluid machinery and energy research on ocean energy and hydropower. In: Proceedings of the IMechE fluid machinery group, 2006-01-01.

Aggidis, George (2006) NW hydro resource model. In: Proceedings of the marine energy seminar, 2006-01-01.

Aggidis, George (2006) Renewable energy research : ocean energy and hydropower. In: Lancaster University, Faculty of Science & Technology Christmas Conference, 2006-01-01.

Aggidis, George A. (2008) Developing the Northwest of England Hydro Resource Model (Invited keynote presentation). In: Joule Grant Holders Conference, 2008-01-10. (Unpublished)

Aggidis, George A. (2006) Hydro and Renewable Energy. (Presentation). In: Science & Technology Conference, 2006-12-20. (Unpublished)

Aggidis, George A. (2005) (Invited Lecture) Advise to the Greek government on renewable energy issues, Hon. George Vagionas MP. In: Untitled event, 2004-06-01. (Unpublished)

Aggidis, George A. (2009) The Lancaster Marine Energy Research in the Context of the International Ocean Energy Symposium 2009 in China (Invited Keynote Paper). In: Proceedings of International Ocean Energy Symposium 2009(IOES-2009), 2009-09-172009-09-18.

Aggidis, George A. (2009) Partnership over coastal tidal energy: How to transform damp squids into Killer Wales. (Presentations). In: North Wales: UK Bridge to a sustainable coastal future? Wales Marine Energy Task Group Workshop, 2009-04-03. (Unpublished)

Aggidis, George A. (2009) Plans for tapping the tidal power potential of the Eastern Irish Sea and NWTEG (Invited keynote paper). In: All Energy 2009, 2009-05-202009-05-21. (Unpublished)

Aggidis, George A. (2007) Renewable Energy Research on Tidal Energy. (Presentation). In: Untitled event, 2007-03-27. (Unpublished)

Aggidis, George A. (2008) Small Hydro Power - The Opportunities. (Invited Keynote Paper). In: Joule Centre for Energy 2008 Conference, Small Hydro Power Schemes in the North West of England: Overcoming the Barriers, 2008-04-03.

Aggidis, George A. (2001) Technological Developments on Small Hydro.(Presentation). In: IMechE, Fluid Machinery Group, 2001-05-01. (Unpublished)

Aggidis, George A. (2008) Tidal Energy research at Lancaster University. (Presentation). In: Northwest Tidal Energy Group Inaugural Meeting, 2008-01-25. (Unpublished)

Aggidis, George A. and Brett, Chris (2010) The Launch of the Heron Corn Mill Hydro Plant(Invited Keynote Paper). In: What's on in the Southern Lake District, 2010-04-03. (Unpublished)

Aggidis, George A. and Broatch, H. (2007) Morecambe Bay: Innovation for Clean Energy Generation. In: British Hydropower Association (BHA) Annual Conference 2007, Delivering the Next Generation, 2007-10-102007-10-11.

Aggidis, George A. and Huang, M. (2007) The New Hydro – Ocean Energy. In: British Hydropower Association (BHA) Annual Conference 2007, Delivering the Next Generation, 2007-10-102007-10-11.

Aggidis, George A. and Luchinskaya, E. and Howard, D. C. (2008) Tidal Energy and the North West of England. In: British Hydropower Association (BHA) Annual Conference 2008, Stepping into the Spotlight, 2008-09-172008-09-18.

Aggidis, George A. and Luchinskaya, E. and Rothschild, R. and Howard, D. C. (2008) The costs of small-scale hydro power production: Impact on the development of existing potential. In: 15th International Conference on Hydropower Plants in the Context of the Climate Change, 2008-11-262008-11-28.

Aggidis, George A. and Luchinskaya, E. and Rothschild, R. and Howard, D.C. (2008) An analysis of the costs of small-scale hydro power for progressing world hydro development. In: Hydro 2008, 2008-10-062008-10-08.

Aggidis, George A. and Rahmati, M. T. and Chaplin, R. V. and McCabe, Andy P. and Mingham, C. G. and Causon, D. M. and Bhinder, M. A. (2009) A control system for a new wave energy converter in irregular wave climates. In: 28th ASME International Conference on Ocean, Offshore and Arctic Engineering, 2009-05-312009-06-05.

Aspinall, Michael and D′Mellow, B. and Mackin, R. O. and Joyce, M. J. and Peyton, Anthony (2007) Digital advances in pulsed fast neutron analysis for applications in counter terrorism. In: European Nuclear Congress, 2007-09-162007-09-20.

Bakari, M. J. and Seward, Derek W. and Taylor, C. James (2009) The Development of a Prototype of a Multi-Arm Robotic System for Decontamination and Decommissioning (D&D) Applications within the Nuclear Industry. In: 12th International Conference on Environmental Remediation and Radioactive Waste Management, 2009-10-112009-10-15.

Baker, N. J. and Aggidis, George A. and Widden, Martin B (2007) Low-head low-cost hydro power by conversion to air pressure. In: British Hydropower Association (BHA) Annual Conference 2007, Delivering the Next Generation, 2007-10-102007-10-11.

Bandala Sánchez, Manuel and Joyce, Malcolm J. (2007) Tumour motion tracking: experiences with microsystems and sensors for radiotherapy. In: European Nuclear Congress, 2007-09-162007-09-20.

Benson, C. and Joyce, M. J. and Winsby, A. and Silvie, J. (2001) Monte-Carlo Calculation of the Response Functions for Two Prototype Cosmic Neutron Metrology Instruments. In: International Conference on Nuclear Data for Science and Technology (ND2001), 2001-10-072001-10-12.

Bhinder, M. A. and Rahmati, M. T. and Aggidis, George A. and Chaplin, R. V. and Mingham, C. g. and Causon, D. M. (2009) A Joint Numerical and Experimental Study of a Surging Point Absorbing Wave Energy Converter. In: 28th ASME International Conference on Ocean, Offshore and Arctic Engineering, 2009-05-312009-06-05.

Bhinder, M. A. and Rahmati, M. T. and Aggidis, George A. and Mingham, C. G. and Chaplin, R. V. and Causon, D. M. (2009) Numerical & Experimental Flow Analysis of a Wave Energy Converter. In: Proceedings of The 8th European Wave and Tidal Energy Conference, 2009-09-072009-09-10.

Burt, Graeme and Ambattu, Praveen and Dexter, Amos and Abram, Thomas and Dolgashev, V and Tantawi, S and Jones, R M (2008) X-band crab cavities for the CLIC beam delivery system. In: 44th ICFA Beam Dynamics Workshop, 2008-12-012008-12-04.

Chaplin, R. V. and Aggidis, George A. (2007) WRASPA: Wave Interactions and Control for Pitching-Surge Point-Absorber Wave Energy Converters. In: Proceedings of the 7th European Wave and Tidal Energy Conference, 2007-09-112007-09-14.

Chaplin, Robert and Rahmati, Rahmati and Gunura, K. and Ma, Xiandong and Aggidis, George A. (2009) Control systems for WRASPA. In: International Conference on CLEAN ELECTRICAL POWER, Renewable Energy Resources Impact, 2009-06-092009-06-11.

Cheng, Chun-Yee and Dawson, Richard and Kelsall, Geoff and Robson, Anna (2007) Electrochemical Reactors for Metal Recovery from Aqueous Halide Electrolyte Solutions. In: TMS 2007 Annual Meeting & Exhibition, 2007-02-252007-03-01.

D'Mellow, B. and Joyce, Malcolm J. and Jarrah, A. (2005) Development of the nSpect portable neutron spectrometer. In: European Nuclear Congress, 2005-01-01.

Dawson, Richard and Kelsall, Geoff (2004) Electrochemical recovery of precious metals from alumina-supported catalysts. In: Johnson-Matthey Symposium on Catalytic Technology, 2004-03-242004-03-26.

Dawson, Richard and Kelsall, Geoff (2004) Recovery of platinum group metals for spent alumina supported catalysts. In: Mini-waste II, 2004-11-092004-11-10.

Dawson, Richard and Kelsall, Geoff (2005) Recovery of platinum group metals for spent alumina supported catalysts. In: Mini-Waste III, Transferring the Knowledge; Delivering the Benefits, 2005-12-052005-12-06.

Deloughry, R. and Davenport, I. and Ma, X. and Ponnapalli, P. V. S. (2003) Development of a virtual instrument system for industrial process tomography. In: 3rd World Congress on Industrial Process Tomography, 2003-09-022003-09-05.

Dexter, Amos and Burt, Graeme (2008) Phase and Amplitude Control of Dipole Crabbing Modes in Multi-Cell Cavities. In: .

Green, Sarah and Boampong, D. K. and Unsworth, A. (2002) Ion beam modification of Ti6Al4V alloy for TJR. In: 17th European Conference on Biomaterials, 2002-09-102002-09-14.

Green, Sarah and Elfick, A. P. and Frostick, S. P. and Unsworth, A. (2002) The morphology of UHMWPE wear debris released from shoulder prostheses. In: 17th European Conference on Biomaterials, 2002-09-102002-09-14.

Green, Sarah and Lee, S. and Joyce, T. and Unsworth, A. (2006) Design and development of a novel multistation MTP joint simulator for in vitro testing. In: Proceedings 20th European Society of Biomaterials Conference, 2006-08-272006-09-01.

Green, Sarah and Liu, C. and Watkins, N. D. and McCaskie, A. W. and Gregg, P. J. (2002) Restrained creep of CMW2000 Bone Cement. In: 17th European Conference on Biomaterials, 2002-09-102002-09-14.

Green, Sarah and Meyer, JRF (2010) Motivation of engineering students-considerations for programme design. In: Engineering Education 2010, 2010-07-062010-07-08.

Gunn, K. and Taylor, C. James (2008) Genetic algorithms for the development and optimisation of wave energy converter control systems. In: 23rd European Institute for Applied Research Workshop on Advanced Control and Diagnosis, 1900-01-01.

Hillmann, Mark and Li, Ming and Quayle, Stephen (2011) Numerical and experimental investigation of a novel breakwater combining coastal defence and energy generation for near shore environment. In: 9th European Wave and Tidal Energy Conference, 2011-09-042011-09-09.

Joyce, M. J. and Aspinall, M. D. and Cave, F. D. and Georgopoulos, K. and Jarrah, Z. (2009) The design, build and test of a digital analyzer for mixed radiation fields. In: ANIMMA 2009 : 2009 1st International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and Their Applications, 2009-06-072009-06-10.

Joyce, Malcolm J. (2010) Real-time digital neutron/γ discrimination in non-flammable fast scintillators. In: NPL Neutron Users Club meeting, 2010-10-01.

Letizia, Rosa and Obayya, Salah (2009) Dispersive Multiresolution Time Domain for High Second Harmonic Generation Efficiency in One-Dimensional Periodic Grating. In: .

Letizia, Rosa and Obayya, Salah (2008) Efficient Multiresolution Time Domain Analysis for Second Harmonic Generation Integrated Devices. In: .

Letizia, Rosa and Obayya, Salah (2008) Multiresolution Time Domain Scheme for Dispersive Second Harmonic Generation Integrated Devices. In: .

Letizia, Rosa and Obayya, Salah (2009) Multiresolution Time Domain of Dispersive High-index Contrast Grating for Second Harmonic Generation. In: .

Letizia, Rosa and Obayya, Salah (2008) New Design of Second Harmonic Generation Using Photonic Crystals. In: .

Lupeanu, Mihaela and Neagu, Corneliu and Opran, Constantin and Rennie, Allan (2012) Functional analysis for the development of bio-medical products. In: Advanced Composite Materials Engineering (COMAT2012), 2012-10-182012-10-20.

Ma, X. and Higson, S. R. and Lyons, A. and Peyton, A. J. (2005) Development of a fast electromagnetic induction tomography system for metal process applications. In: 4th World Congress on Industrial Process Tomography, 2005-09-022005-09-05.

Ma, X. and Peyton, A. J. and Binns, R. and Higson, S. R. (2003) Imaging the flow profile of molten steel through a submerged pouring nozzle. In: 3rd World Congress on Industrial Process Tomography, 2003-09-022003-09-05.

Ma, X. and Peyton, A. J. and Higson, S. R. and Drake, P. (2007) Developments of multiple frequency electromagnetic induction system for steel flow visualization. In: 5th World Congress on Industrial Process Tomography, 2007-09-032007-09-06.

Ma, Xiandong (2011) Online intelligent condition monitoring of electrical machines. In: The 24th International Congress on Condition Monitoring and Diagnostics Engineering Management (COMADEM2011), 2011-05-302011-06-01.

McCabe, A. P. and Aggidis, George A. and Widden, M. B. (2009) A pilot study into the optimization of the shape of a wave energy collector by genetic algorithm. In: Proceedings of The 8th European Wave and Tidal Energy Conference, 2009-09-072009-09-10.

McCabe, Andy P. and Aggidis, George A. (2009) A preliminary study into optimising the shape of a wave energy collector using a genetic algorithm. In: The 1st International Conference on Sustainable Power Generation and Supply (SuperGen), 2009-04-01.

McCabe, Andy P. and Aggidis, George A. and Widden, Martin (2008) Some Aspects of Tuning Wave Energy Converters in Irregular Waves. In: Proceedings of the World Renewable Energy Conference, WREC 2008, 2008-07-192008-07-25.

Pates, W. and Aggidis, George A. and Panagopoulos, A. (2008) Growth Determinants of the Small Hydropower Sector. In: British Hydropower Association (BHA) Annual Conference 2008, Stepping into the Spotlight, 2008-09-172008-09-18.

Pattanasattayavong, P and Thomas, Stuart and Adamopoulos, George and Labram, John and Anthopoulos, Thomas (2011) Hybrid Phototransistors-based on Dye-functionalised ZnO Semiconducting Channels. In: MRS 2011 Spring Meeting, 2011-04-26.

Pinkerton, A. J. (2005) Alternative nozzle and metal delivery methods for laser-assisted metal deposition:(invited paper & presentation). In: Association of Industrial Laser Users Conference on Laser-assisted Metal Deposition, 2005-06-142005-06-16.

Pinkerton, A. J. and Li, L. (2002) Direct laser deposition layer profiles and the factors affecting them. In: Time Compression Technology (TCT) Conference, 2002-10-162002-10-17.

Pinto, Domenico and Obayya, Salah (2005) Accurate finite element time domain modelling of resonant photonic bandgap cavities. In: International Workshop on the Theory and Numerical Modelling of Optical Waveguides, 2005-04-082005-04-09.

Pinto, Domenico and Obayya, Salah (2008) Finite Volume Time Domain Analysis of Nonlinear Photonic Crystal Devices. In: European Conference on Integrated Optics (ECIO) 2008, OWTNM 08, 2008-06-132008-06-14.

Pinto, Domenico and Obayya, Salah (2007) New Alternating-Direction-Implicit Finite-Difference-Time-Domain Method for Photonic Crystal Devices. In: International Computational Electromagnetic Time Domain (CEM-TD) Workshop, 2007-10-152007-10-17.

Pinto, Domenico and Obayya, Salah (2010) Novel Dual-Mesh Finite Volume Time Domain Method for the Analysis of Photonic Crystal Based Devices. In: Semiconductor and Integrated Optoelectronics, SIOE 2010, 2010-03-292010-03-31.

Pinto, Domenico and Obayya, Salah (2006) Time-domain modelling of nonlinear optical waveguides. In: International Workshop on Optical Waveguide Theory and Numerical Modelling, OWTNM’06, 2006-04-21.

Rahmati, M. T. and Aggidis, George A. (2008) A RANS Code for Low-Speed Axial Turbo machinery flow analysis. In: Proceedings of the International Conference on Computational Fluid Dynamics, CFD 2008, 2008-06-092008-06-10.

Rahmati, M. T. and Aggidis, George A. (2008) An inverse approach for blade shape design. In: Proceedings of the AFM 2008, the Seventh International Conference on Advances in Fluid Mechanics, 2008-05-212008-05-23.

Riccitelli, Riccardo and Paoloni, Claudio and Brunetti, Francesca and Ulisse, Giacomo and Di Carlo, Aldo (2008) Flip-cathode field emission vacuum triode for THz applications. In: .

Robertson, David and Taylor, C. James (2012) Low-level joint control of a robotic manipulator using state-dependent parameter models. In: .

Robertson, David and Taylor, C. James (2012) State-dependent control of a hydraulically-actuated nuclear decommissioning robot. In: 2012 UKACC International Conference on Control, 2012-09-032012-09-05.

Selim, Ramsey and Pinto, Domenico and Obayya, Salah (2008) Complex Envelope Alternating Direction Implicit Finite Difference Time Domain Analysis Of Ultra-Fast Photonic Bandgap Switches. In: Semiconductor and Integrated Optoelectronics, SIOE’08, 2008-03-312008-04-02.

Selim, Ramsey and Pinto, Domenico and Obayya, Salah (2010) Terahertz Ultra Fast Switching Device Based Photonic Crystals. In: Semiconductor and Integrated Optoelectronics, SIOE 2010, 2010-03-292010-03-31.

Shippen, Alan and Joyce, Malcolm J. (2008) Profiling the depth of caesium-137 contamination in concrete via a relative linear attenuation model. In: 7th International Topical Meeting on Industrial Radiation and Radioisotope Measurement Applications (IRRMA7), 2008-06-01.

Shippen, B. A. and Joyce, Malcolm J. (2007) Profiling the gamma-ray distribution of the cement lining of an established nuclear pond as a function of depth. In: European Nuclear Congress, 2007-09-162007-09-20.

Shippen, David I. and Joyce, Malcolm J. and Aspinall, Michael D. (2009) A Wavelet Packet Transform Inspired Method of Neutron-Gamma Discrimination. In: Proc. ANIMMA International Conference, 2009-06-072009-06-10.

Smith, Jeremy and Bashir, Aneeqa and Adamopoulos, George and Bradley, Donal and Anthopoulos, Thomas (2009) High-Mobility Ambipolar Organic-Inorganic Hybrid Transistors (Invited). In: 2nd International Symposium on Flexible Organic Electronics, 2009-07-08.

Smith, Paul and Rennie, Allan (2008) Rapid Manufacturing Design Tools. In: Lancaster University, Faculty of Science & Technology Christmas Conference, 2008-12-162008-12-16. (Unpublished)

Soleimani, M. and Ktistis, C. and Ma, X. and Yin, W. and Lionheart, W. R. B. and Peyton, A. J. (2005) Magnetic induction tomography : image reconstruction on experimental data from various applications. In: 6th Conference on Biomedical Applications of Electrical Impedance Tomography, 2005-06-222005-06-24.

Soleimani, M. and Lionheart, W. R. B. and Peyton, A. J. and Ma, X. (2005) A 3D inverse finite element technique applied to experimental magnetic induction tomography data. In: 4th World Congress on Industrial Process Tomography, 2005-09-022005-09-05.

Soleimani, M. and Lionheart, W. R. B. and Peyton, A. J. and Ma, X. (2003) Image reconstruction in 3D magnetic induction tomography using a FEM forward model. In: 3rd World Congress on Industrial Process Tomography, 2003-09-022003-09-05.

Taylor, C. James (2007) Evaluation of Ramp Metering on the M3/M27 and the potential benefits of predictive and linked control optimized for queue constraints. In: Workshop on Ramp Metering in Europe: The EURAMP Project, 1900-01-01.

Taylor, C. James and Chotai, Arun and Young, Peter C. (1998) Multivariable Proportional-Integral-Plus (PIP) control of time delay systems. In: IMECHE Seminar: Tuning-In to Increase Profit: Developments in PID Tuning, 1998-03-31.

Taylor, C. James and McCabe, A. and Young, Peter C. and Chotai, Arun (1998) Proportional-Integral-Plus (PIP) control of the GEC Alsthom Gasifier benchmark challenge. In: MEC Benchmark Challenge on Gasifier Control, 1998-06-24.

Wang, Yifei and Ma, Xiandong and Joyce, Malcolm (2012) Optimal sensor selection for wind turbine condition monitoring using multivariate principal component analysis approach. In: Proceedings of the 18th International Conference on Automation & Computing (ICAC’12), Loughborough University, Leicestershire, UK, 8 September 2012, 2012-09-08.

Weaver, J. A. and Joyce, M. J. and Peyton, A. J. and Roskell, J. (2000) Signal processing techniques applied to a transportable neutron spectrometer (TNS). In: INucE Int. Conf. Control and Instrumentation in Nuclear Installations, 2000-01-01.

Weerasekera, Roshan and Grange, M. and Pamunuwa, Dinesh B. and Tenhunen, Hannu (2010) On signalling over through-silicon via (TSV) interconnects in 3-D integrated circuits. In: Design Automation and Test in Europe (DATE) Conference, 2010-01-01.

Winchester, Jonathan and Quayle, Stephen (2011) Torque ripple and power in a variable pitch vertical axis tidal turbine. In: 9th European Wave and Tidal Energy Conference, 2011-09-042011-09-09.

Wöbkenberg, Paul and Zimmerling, Tino and Bashir, Anneqa and Adamopoulos, George and Bradley, Donal and Anthopoulos, Thomas (2010) Solution Processed Ultra-violet Light Sensing ZnO Thin-film Transistors. In: MRS 2010 Spring Meeting, 2010-04-04.

Yin, W. and Ma, X. and Zysko, G. and Peyton, A. J. (2007) Linear EMT for the detection of faults in metallic planar structures (DIF). In: 5th World Congress on Industrial Process Tomography, 2007-09-032007-09-06.

Contribution in Book/Report/Proceedings

Abou Ghadeer, M and Ye, J Q and Mansouri, A H (2003) Interactions between strip and beam elements of a hollow block slab system. In: Computational Fluid and Solid Mechanics 2003, Vols 1 and 2, Proceedings. ELSEVIER SCIENCE PUBL B V, Amsterdam, pp. 42-46. ISBN 0-08-044046-0

Adamopoulos, George and Garcia, Enric and Godet, Christian and Drévillon, Bernard and Silva, Ravi and Robertson, John (2006) Ellipsometry « fingerprinting » of amorphous carbon alloys. In: Materials Research Society. .

Adams, Jamie C. and Joyce, Malcolm J. and Mellor, Matthew (2009) The effect of high-scatter shielding geometries in validating the dose inferred by N-Visage. In: ASME 2009 12th International Conference on Environmental Remediation and Radioactive Waste Management : ASME 2009 12th International Conference on Environmental Remediation and Radioactive Waste Management. ASME, pp. 497-506. ISBN 9780791844083 0791844080

Aggidis, G. A. (2004) Hydropower developments – new projects and rehabilitation. In: Proceedings of the international symposium on hydro power developments. .

Aggidis, George A. (2004) Advanced materials for fluid machinery. In: Proceedings of the international symposium on advanced materials for fluid machinery. .

Aggidis, George A. (2004) Centrifugal pumps – state of the art and new opportunities. In: Proceedings of the international symposium on centrifugal pump developments. .

Aggidis, George A. (2004) The facts and fiction of renewable energy. In: Proceedings of the UK energy policy conference: will the lights go out? .

Aggidis, George A. and Howard, D. C. and Wright, S. M. and Scott, R. (2006) Energy source or sink? : The role of the Uplands in meeting our energy targets. In: Proceedings of the international Uplands centre conference on sustainable Uplands. .

Ahsan, M. N. and Bradley, R. and Pinkerton, A.J. (2010) X-ray analysis of pore formation in direct metal deposition and its causes. In: Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 159-165.

Ahsan, M. N. and Pinkerton, A.J. (2009) A method and model for deposition of TI-6Al-4V with controlled porosity. In: Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 462-471.

Ahsan, M. N. and Wang, W. and Pinkerton, A.J. (2010) An iterative, energy-mass balance model for laser metal deposition. In: Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 149-158.

Ahsan, M. Naveed and Pinkerton, Andrew J. and Ali, Laiq (2012) A comparison of laser additive manufacturing using gas and plasma-atomized Ti-6A1-4V powders. In: Innovative Developments in Virtual and Physical Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, Boca Raton, pp. 625-633. ISBN 978-0-415-68418-7

Al-Gayem, Qais and Liu, Hongyuan and Richardson, A. M. D. and Burd, N. and Kumar, Mukesh (2010) An on-line monitoring technique for electrode degradation in bio-fluidic microsystems. In: Proceedings of the 2010 IEEE International Test Conference (ITC). IEEE, Austin, Texas, pp. 1-10. ISBN 978-1-4244-7206-2

Ali, F. and Honary, B. (1994) A symbol synchronisation technique for multi-tone multiple access channel transmission system. In: Proceedings of the IEEE international conference on telecommunications. IEEE, Dubai, pp. 134-137.

Aloisio, Marinelia and Paoloni, Claudio (2008) SWS improved analysis based on inhomogeneous dielectric loading. In: 2008 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. IEEE, NEW YORK, pp. 298-299. ISBN 978-1-4244-1715-5

Aloisio, Marinella and Carter, Richard and Paoloni, Claudio (2007) Analytical computations, measurements and 3-D EM simulations for the calculation of cold parameters in helical SWSs. In: EIGHTH IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. IEEE, ELECTRON DEVICES SOC & RELIABILITY GROUP, NEW YORK, pp. 413-414. ISBN 978-1-4244-0633-3

Anapolitanos, I and Lam, Dennis and Ye, Jianqiao (2006) Strengthening ductile metallic structures using externall bonded fibre reinforced composite materials. In: Steel and Aluminium Structures, ICSAS'07:. Oxford Brookes University, Oxford. ISBN 9780955625404

Andrieux, Fabrice and Boxall, Colin and Taylor, Robin (2011) Determination of the Constants of Formation of Complexes of Iron(III) and acetohydroxamic acid. In: Applications of Thermodynamics to Biological and Materials Science. InTech, Rijeka, Croatia, pp. 441-458. ISBN 978-953-307-980-6

Andrieux, Fabrice and Boxall, Colin and Taylor, Robin and Mason, C. (2006) Modelling the Hydrolysis of Actinide Complexed Hydroxamic Acid Ligands. In: RSC Special Publication. Royal Society of Chemistry, Cambridge, pp. 626-628. ISBN 978-0-85404-678-2

Anthony, Richard and Evans, Martyn and Rennie, Allan and Kirby, Eddie (2011) Opportunities offered by additive manufacturing in creative businesses: informing designers. In: 13th International Conference on Engineering & Product Design Education (EPDE 11). , pp. 623-628.

Arani, F. and Honary, B. and Smietana, R. (1994) DSP implementation of a channel evaluation technique based on fuzzy logic and TCM. In: Proceedings of the third UK/Australian international symposium on DSP for communications systems. Proceedings of the third UK/Australian international symposium on DSP for communications systems, Warwick, pp. 123-125.

Ariadi, Yudhi and Hasan, Saad and Smith, Paul and Rennie, Allan (2008) Development of an Additive Layer Manufacturing business model: creating an environment to support designers from concept to distribution. In: Proceedings of 32nd Japan Rapid Prototyping Symposium. , pp. 79-84.

Ariadi, Yudhi and Rennie, Allan (2008) Design templates for consumer use in customising additive layer manufactured products. In: 9th National Conference on Rapid Design, Prototyping and Manufacturing. MJA Print, Beaconsfield, pp. 137-144. ISBN 978-0-948314-55-1

Arnai, F. and Honary, B. (1993) Trellis coded modulation over Z4. In: Proceedings of the 2nd international symposium on communication. , Ambleside, p. 93.

Arnai, F. and Honary, B. (1993) Trellis coded modulation over rings. In: Proceedings of the 5th Bangor communication symposium. , Bangor, pp. 16-20.

Ash, D. and Joyce, Malcolm J. and Port, S. N. (2000) The quartz crystal microbalance: an electronic sensor for dynamic fluid mechanics. In: Proceedings of the regional symposium on quality and automation (RESQUA 2000). .

Ash, D. and Joyce, Malcolm J. and Port, S. N. and Barnes, Chris (2000) The quartz crystal microbalance: an electronic sensor for dynamic fluid mechanics. In: Proceedings of 2nd conference on postgraduate research in electronics and photonics. .

Ash, D. C. and Joyce, Malcolm J. and Garnham, G. W. and Barnes, C. and Port, S. N. (2001) Innovative electronic analysis device for nuclear fuel reprocessing. In: Proceedings of the 9th international conference on nuclear engineering (ICONE9). .

Aspinall, M. D. and D'Mellow, B. and Mackin, R. O. and Joyce, M. J. and Peyton, A. J. (2007) Digital Pulse Pile-up Management in Organic Liquid Scintillators. In: Proceedings of 5th World Congress on Industrial Process Tomography : Bergen, Norway, 3rd to 6th September, 2007. Virtual Centre for Industrial Process Tomography. ISBN 9780853162650 0853162654

Bakari, Mohamed and Seward, Derek W. and Shaban, E. M. and Agate, Rahee (2006) Multi-arm mobile robot for hazardous nuclear decommissioning tasks. In: Proceedings of the 23rd international symposium on automation and robotics in construction. .

Baker, N. J. and Mueller, M. A. and Spooner, E. (2004) Permanent magnet air-cored tubular linear generator for marine energy converters. In: Proceedings of the 2nd IEE international conference on power electronics, machines and drives. , pp. 862-867. ISBN 0-86341-383-8

Baker, N. J. and Mueller, M. A. and Taverner, P. J. (2005) Prototype development and testing of direct drive linear electrical machines for marine energy converters. In: Proceedings of the world renewable energy conference. .

Barlow, M. I. and Burge, S. E. and Roskilly, A. P. (1993) Design and implementation of a transputer based robot control system. In: Parallel processing in a control systems environment. Prentice Hall, New York, pp. 209-232. ISBN 0136515304

Bennett, D. and Burge, S. E. and Bradshaw, A. (1998) Non-linear controller design for a highly coupled VSTOL aircraft. In: Proceedings of the UKACC international conference on control ’98. , Swansea, pp. 1510-1515.

Benson, C. and Joyce, Malcolm J. and Kestell, D. and Stevenson, D. and Mathewson, A. and Price, R. A. and Silvie, J. (2003) Towards Reactor Dosimetry with MOSFET devices. In: Reactor Dosimetry in the 21st Century: Proceedings of the 11th International Symposium on Reactor Dosimetry. World Scientific Publishing Co. Pte Ltd. ISBN 9789812384485 9812384480

Benson, C. and Joyce, Malcolm J. and O'Connell, B. and Silvie, J. (2000) Neutron detection at the extremes of sensitivity in the cosmic environment. In: Proceedings of the IEEE nuclear and space radiation effects conference. .

Bhagate, Kiran and Ye, Jianqiao and Singh, Arbind (2012) Static shape control using piezoelectric actuator. In: Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Compsite Structures. .

Bhagate, Kiran A. and Pawar, Prashant and Singh, Arbind Kumar and Ye, Jianqiao (2006) Accuracy of design sensitivity for optimization of structural using small strain theory by finite element method. In: III European Conference on Computational Mechanics. Springer, Berlin, p. 711. ISBN 1402049943

Binns, R. and Davis, C. and Dickinson, S. J. and Morris, P. F. and Peyton, A. J. and Papaelias, M. P. H. and Pritchard, W. D. N. and Strangwood, M. (2002) Developments in the use of electromagnetic methods to monitor cooling transformations in steel samples. In: Proceedings of the IOM conference: instrumentation to innovation - applications and developments in metal production and use. .

Binns, R. and Dickinson, S. J. and Peyton, A. J. (2001) Detection of phase transformation in hot strip steel samples using a multi-frequency electromagnetic impedance measuring node. In: Proceedings of the 11th conference on sensors and their applications. , pp. 45-50.

Binns, R. and Johnstone, S. and Mallinson, S. and Meydan, T. and Peyton, A. J. (1999) Using electromagnetic methods to monitor phase transformation in steel samples. In: Proceedings of the institute of material conference: advances in on-line instrumentation for finishing processes in strip production. , London.

Binns, R. and Johnstone, S. and Morris, P. F. and Peyton, A. J. and Pritchard, W. D. N. (2000) Developments in the use of electromagnetic methods to monitor the transformation of steel samples. In: Proceedings of the institute of material conference: measurement technology and information management through the process route. .

Binns, R. and Peyton, A. J. (2000) Developments in the use of electromagnetic methods to monitor the transformation of steel samples. In: Proceedings of the regional symposium on quality and automation (RESQUA 2000). , Penang, Malaysia, pp. 155-162.

Bissessur, Y. and Peyton, A. J. (2002) A forward model for planar array EMT imaging of cylindrical conductors embedded in a non-conducting medium. In: Proceedings of the 2nd international symposium on process tomography. .

Blake, T. E. and Chaplin, R. V. (1998) The P S FROG: latest developments and model testing. In: Proceedings of the 3rd European wave energy conference. , Patras, Greece.

Bocking, C. and Jacobson, D.M and Rennie, Allan (2001) An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts. In: Time Compression technologies Conference 2001. Rapid News Publications PLC.

Bocking, C. and Jacobson, D.M and Rennie, Allan (2001) Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming. In: 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of. , pp. 412-415.

Bocking, C. and Rennie, Allan and Bennett, G. and Lewis, N. (2000) Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode. In: Time Compression Technologies 2000 Conference. Rapid News Publications PLC, pp. 151-156.

Borges, A. R. and de Oliveira, E. and Velez, J. and Peyton, A. J. and Tavares, C. (1999) Development of electromagnetic tomography (EMT) for industrial application: part 2: image reconstruction and software framework. In: Proceedings of the world congress on industrial process tomography. , Buxton.

Bouamrane, Faycal and Bouvet, T. and Megtert, S. and Brunetti, F. and Mineo, Mauro and Paoloni, C. and Tamburri, E. and Terranova, M.L. and Ulisse, G. and Di Carlo, A. and Marchesin, R. and Pham, K. and Durand, A.J. and Kotiranta, M. and Krozer, V. and Guiset, P. and De Rossi, A. and Schnell, J.P. and Legagneux, P. and Dolfi, D. and Fiorello, A.M. and Dispenza, M. and Secchi, A. and Zhurbenko, V. and Gohier, A. and Cojocaru, C.-S. (2011) LIGA-based Slow Wave Structure for a THz Vacuum Amplifier. In: Proceedings of High Aspect Ratio Micro Structure Conference HARMST 2011. , Taiwan.

Bracewell, R. H. and Chaplin, R. V. and Bradley, D. A. (1992) Schemebuilder and layout: computer based tools to aid the design of mechatronic systems. In: IMechE Conference: Mechatronics - the integration of engineering design. , Dundee, pp. 1-6.

Bracewell, R. H. and Chaplin, R. V. and Bradley, D. A. and Langdon, P. M. and Sharpe, John (1993) Schemebuilder: a design aid for the conceptual stage of product design. In: Proceedings of the 9th international conference on engineering design, ICED '93. Heurista, Zurich.

Bracewell, R. H. and Chaplin, R. V. and Langdon, P. M. and Li, M. and Oh, V. K. and Sharpe, J. E. E. (1995) Integrated platform for AI support of complex design (part II): supporting the embodiment process. In: Proceedings of the 1995 Lancaster international workshop on engineering design published as AI support for conceptual design. Springer-Verlag, Ambleside, pp. 189-207.

Bradley, D. A. (1993) Sensors in manufacturing systems. In: Sensors and actuators VI. Institute of Physics, pp. 411-422.

Bradley, D. A. and Bracewell, R. H. (1992) Computer support for engineering design - the schemebuilder project. In: SERC/IMechE expert meeting on information technology and product design. , St Albans, pp. 69-73.

Bradley, D. A. and Buur, J. (1993) The representation of mechatronic systems. In: Proceedings of the 9th international conference on engineering design, ICED '93. Heurista, Zurich, pp. 37-44.

Bradley, D. A. and Dorey, A. P. and Silvester, P. J. and Adelson, R. M. (1992) An integrated electronic degree scheme - the Lancaster electronics course. In: Innovative teaching in engineering. Ellis Horwood, London. ISBN 0134576071

Bradley, D. A. and Hoyle, D. A. and Harden, B. (1992) Intelligent domestic products - past present and future. In: IEE colloquium on intelligent domestic products. , London.

Bradley, D. A. and Larbes, C. (1994) The development of a boost-modulated controller for a pwm inverter and a three-phase induction motor based drive Part 1. In: Proceedings of an international ASME conference on systems - analysis, control and design, SYS'94. , Lyon, pp. 49-64.

Bradley, D. A. and Larbes, C. (1994) The development of a boost-modulated controller for a pwm inverter and a three-phase induction motor based drive Part 2. In: Proceedings of an international ASME conference on systems - analysis, control and design, SYS'94. , Lyon, pp. 65-80.

Bradley, D. A. and Seward, D. W. (1992) The Lancaster University computerised excavator programme. In: Mechatronics - the integration of engineering design. IMechE, Dundee, pp. 163-168.

Bradshaw, A. (1999) Mechatronics knowledge management. In: Proceedings of the second world manufacturing conference: keynote speech. , Durham.

Bradshaw, A. and Burge, S. E. and Chotai, A. and Young, P. C. (1994) A systems approach to environmental engineering. In: Proceedings of the 1st conference of the forum for environmental engineering education. , Dundee, pp. 35-42.

Bradshaw, A. and Counsell, J. M. (1993) Advanced digital controllers for servo-pneumatic actuated machines. In: Proceedings of IMechE seminar on machine actuators. , London, pp. 5-9.

Bradshaw, A. and Counsell, J. M. (1998) A knowledge based mechatronics approach to controller design. In: Proceedings of the UKACC international conference on control ’98. , Swansea, pp. 1723-1727.

Bradshaw, A. and Dickinson, S. J. (1993) Multi-tariff optimisation for domestic heating systems which combine the use of storage and direct heaters. In: Proceedings of the international conference on engineering software. , Stafford, pp. 43-49.

Bradshaw, A. and Ding, L. and Taylor, C. James (2003) Characteristic comparison of control systems for a nuclear power plant. In: Proceedings of the international conference on agile manufacturing (ICAM2003). , pp. 4-6.

Bradshaw, A. and Seward, D. W. and Nagy, F. N. (1994) Robo Sapiens: a personal assistant robot. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton, pp. 159-164.

Bratt, Adrian and Baker, K. and Richardson, A. M. D. and Welbers, A. (1994) Development of class 1 QTAG monitor. In: Proceedings of an international test conference: the next 25 years. IEEE Service Centre.

Bratt, Adrian and Harvey, R. J. A. and Dorey, A. P. (1992) Analogue behavioural modelling at systems level. In: IEE PG EC10/C11 colloquium on linear analogue circuits and systems. IEE, 14/1-14/9.

Bratt, Adrian and Harvey, R. J. A. and Dorey, A. P. and Richardson, A. M. D. (1993) Aspects of current reference generation and distribution for IDDx pass/fail current determination. In: Proceedings of the IEE colloquium on mixed signal VLSI test, digest No 1993/240. , London.

Bratt, Adrian and Richardson, A. M. D. and Harvey, Russell and Dorey, A. P. (1995) A design-for-test structure for optimising analogue and mixed signal IC test. In: European Design and Test Conference. IEEE, pp. 24-33.

Bromley, Michael and Boxall, Colin (2012) Semiconductor photocatalysis and metal deposition. In: Advances in Chemistry Research. Nova Science Publishers. ISBN 978-1-62100-562-9

Brown, M. W. and Burge, S. E. and Bradley, D. A. (1996) An infrared sensor for an electric wheelchair obstacle avoidance system. In: Proceedings of the 5th mechatronics forum international conference. , Portugal, pp. 35-40.

Brunetti, F. and Cojocarua, C. -S. and de Rossi, A. and Di Carlo, A. and Dispenza, M. and Dolfi, D. and Durand, A. and Fiorello, A. and Gohier, A. and Guiset, P. and Korantia, M. and Krozer, V. and Legagneux, P. and Marchesin, R. and Megtert, S. and Bouamrane, F. and Mineo, Mauro and Paoloni, C. and Pham, K. and Schnell, J. P. and Secchi, A. and Tamburri, E. and Terranova, M. L. and Ulisse, G. and Zhurbenko, V. (2010) European Research on THz Vacuum Amplifiers. In: 35TH INTERNATIONAL CONFERENCE ON INFRARED, MILLIMETER, AND TERAHERTZ WAVES (IRMMW-THZ 2010). IEEE, New York, -. ISBN 978-1-4244-6657-3

Brunetti, F. and Lugli, P. and Fiori, A. and Orlanducci, S. and Sessa, V. and Tamburri, E. and Toschi, F. and Terranova, M.L. and Riccitelli, R. and Petrolati, E. and von Neumann, L. and Paoloni, C. and Reale, A. and di Carlo, A. and Ciorba, A. and Cirillo, M. and Merlo, V. (2006) Realization of a carbon nanotube-based triode. In: Nanotechnology, 2006. IEEE-NANO 2006. Sixth IEEE Conference on. IEEE, pp. 246-249. ISBN 1-4244-0077-5

Burbidge, M. and Georgopoulos, K. and Lechner, A. and Richardson, A. (2006) Bit-stream manipulation for SD modulator failure mode analysis. In: Proceedings of the 11th IEEE European test symposium. .

Burbidge, M. and Lechner, A. and Bell, G. and Richardson, Andrew M. D. (2004) Motivations and techniques of built in self-test for embedded frequency synthesis systems incorporating charge pump phase-locked loops. In: IEE proceedings - circuits, devices and systems. , pp. 337-348.

Burbidge, M. and Richardson, Andrew M. D. and Lechner, A. (2001) Test techniques for embedded charge pump phase-locked loops: problems, current BIST techniques and alternative suggestions. In: Proceedings of the 7th IEEE international test workshop. , pp. 97-102.

Burbidge, M. J. and Tijou, J. Richardson (2002) Investigations of automatic built in transient step response monitoring for embedded second order charge pump phase locked loop frequency synthesisers. In: Proceedings of the 8th IEEE mixed signal test workshop. .

Burbidge, Martin J. and Tijou, Jim and Poullet, Frederic and Richardson, Andrew M. D. (2002) Investigations for minimum invasion digital only built in ‘ramp’ based test techniques for charge pump PLLs. In: Proceedings of the Seventh IEEE European Test Workshop, 2002. IEEE, pp. 95-102. ISBN 0-7695-1715-3

Burbidge, Martin J. and Tijou, Jim and Richardson, Andrew M. D. (2003) Techniques for automatic on chip closed loop transfer function monitoring for embedded charge pump phase locked loops. In: Design, Automation and Test in Europe Conference and Exhibition, 2003. , pp. 496-501. ISBN 0-7695-1870-2

Burge, S. E. and Felton, R. D. (1996) Reduction of structural coupling in advanced fighter aircraft by active structural mode control. In: Proceedings of the UKACC international conference control '96. , pp. 626-631.

Burge, S. E. and Grout, I. A. and Dorey, A. P. (1994) Application specific integrated circuit implementation of siso control laws. In: Proceedings of the IEE international conference on control '94. IEE, London, pp. 1104-1110.

Burge, S. E. and Tannock, J. D. T. (1993) An implementation programme for quality assurance systems in an engineering department. In: Proceedings of SEFI annual conference 'achieving and assessing quality of engineering education'. Lulea University of Technology, Sweden, pp. 169-180.

Burge, S. E. and Tannock, J. D. T. (1994) A practical approach to implementing quality management in higher education. In: Engineering professors' council: occasional paper. Newcastle University, pp. 1104-1110.

Burge, S. E. and Tannock, J. D. T. (1993) A practical approach to total quality management in higher education. In: Proceedings of the Newcastle international conference on 'quality and its applications'. Newcastle University.

Burns, C. J. and Hargreaves, J. K. (1994) The occurrence and properties of large-scale irregular structures in the auroral F region. In: Proceedings of an international beacon satellite symposium. .

Burt, Graeme and Dexter, Amos and Bellantoni, C. and Beard, P. and Goudket, P. (2006) Analysis of Wakefields in the ILC crab cavity. In: Proceedings of the EPAC 2006 conference. .

Burt, Graeme and Dexter, Amos and Bellantoni, C. and Beard, P. and Goudket, P. (2006) Progress towards crab cavity solutions for the ILC. In: Proceedings of the EPAC 2006 conference. .

Burt, Graeme and Dexter, Amos and Bellatoni, L. and Goudket, P. and Beard, C. and Kalinin, A. and Ma, L. (2005) Crab cavity system for the ILC. In: Proceedings of the ALCPG and ILC workshops. .

Carroll, P. A. and Pinkerton, A. J. and Allen, J. and Syed, W. U. H. and Sezer, H. K. and Brown, P. and Ng, G. and Scudamore, R. and Li, L. (2006) The effect of powder recycling in direct metal laser deposition on powder and manufactured part characteristics. In: Proceedings of AVT-139 Specialists Meeting on Cost Effective Manufacture via Net Shape Processing. NATO Research and Technology Organisation.

Carter, R. G. (2000) Determination of the interaction impedance of helix slow-wave structures. In: International Vacuum Electronics Conference. IEEE, California, p. 2. ISBN 0-7803-5987-9.

Carter, R. G. and Bailey, A. (1994) Dielectric measurement with microstrip resonators. In: Proceedings of a conference: microwaves '94: the applications of RF, microwave and millimetre wave technologies. Nexus Business Communications, Swanley; England.

Carter, R. G. and Ball, E. M. and Brady, M. B. (1997) Magnetron frequency twinning. In: Proceedings of the ESA/NATO workshop on microwave tubes for space, military and commercial applications. ESTEC, The Netherlands, p. 127.

Carter, R. G. and Wang, P. (1997) Equivalent circuit modelling of helix slow-wave structures. In: Proceedings of the ESA/NATO workshop on microwave tubes for space, military and commercial applications. ESTEC, The Netherlands, p. 127.

Carter, R. G. and Wang, P. (1994) An equivalent circuit model for helix slow-wave structures. In: Proceedings of a conference: microwaves '94: the applications of RF, microwave and millimetre wave technologies. Nexus Business Communications, Swanley.

Carter, Richard G. (2001) An improved equivalent circuit model of folded-waveguide slow-wave structures. In: Proceedings of a conference on displays and vacuum electronics. .

Carter, Richard G. and MacGregor, A. (2001) Effects of imperfections on periodic permanent magnet focussing of electron beams. In: Proceedings of IVEC ’2001. .

Castle, T. and Anderson, D. C. (1996) Modelling of an integrated supermarket refrigeration and heating system using natural refrigerants. In: Proceedings of the 6th international refrigeration conference. , Indiana.

Celik, Kursat and Caglayan, Nuri and Cinar, R and Ucar, M and Ersoy, H and Rennie, Allan (2012) Stress analysis of a sample marine crane’s boom under static loading condition. In: 5th International Mechanical Engineering Forum 2012. , Prague, Czech Republic, pp. 246-256. ISBN 978-80-213-2291-2

Celik, Kursat and Karayel, Davut and Caglayan, Nuri and Rennie, Allan and Akinci, Ibrahim (2010) Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter. In: 11th National Conference on Rapid Design, Prototyping and Manufacturing. CRDM Ltd, High Wycombe, pp. 181-191. ISBN 978-0-9566643-0-3

Celik, Kursat and Rennie, Allan and Akinci, Ibrahim (2012) Non-Linear Stress Analysis for the Bolt Connections of A Chisel Tine Using Finite Element Method. In: International Conference of Agricultural Engineering (CIGR-AgEng 2012). . ISBN 978-84-615-9928-8

Celik, Kursat and Rennie, Allan and Topakci, Mehmet and Akinci, Ibrahim (2011) Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools. In: Proceedings of the XXXIV CIOSTA CIGR V Conference 2011. .

Chandy, R. P. and Morgan, R. and Scully, P. J. (1999) The drag force flowmeter. In: The measurement, instrumentation and sensors handbook. Electrical engineering handbook series . IEEE Press/CRC Publication. ISBN 0849383471

Chaplin, R. V. and Folley, M. S. (1998) Sea-bed devices technical comparisons of existing and new types. In: Proceedings of the third European wave energy conference. , Patras, Greece.

Charbit, G. and Honary, B. (1993) DSP implementation of an RS coded frequency hopping MFSK scheme with various channel impairments. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 86-87.

Chen, H-C and Blackburn, J. and Pinkerton, A.J. and Li, L. and Hilton, Paul (2008) A comparative study of single mode fibre laser and Nd:YAG laser welding of Ti-6Al-4V. In: Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, pp. 163-168.

Chen, H-C and Pinkerton, A J and Li, L. (2008) Single mode fibre laser welding of dissimilar aerospace alloys. In: Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, pp. 505-510.

Chen, H-C. and Pinkerton, A. J. and Li, L. and Mistry, A. T. (2009) Fibre laser welding of Zn-coated steel in Al alloy for next generation lightweight vehicles. In: Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, Paper P104.

Chua, L. and Oh, K. S. V. and Bradley, D. A. and Dawson, D. (1993) Concurrent engineering: a taxonomy of techniques. In: Proceedings of the 2nd international conference on computer integrated manufacturing (ICCIM '93). , Singapore, pp. 265-270.

Clark, P. D. J. and Horley, N. and Darnell, M. and Honary, B. (1993) DSP Modem/Codec implementation for long-range radio applications. In: Proceedings of the IEE colloquium on DSP applications in communication systems. , 2.1-6.

Clark, P. D. J. and Horley, N. and Darnell, M. and Honary, B. and Maundrell, M. (1993) An integrated MFSK modem/codec. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 80-82.

Comerford, D. P. and Quayle, Stephen D. (2004) A structured approach to the simplification of optimization problems in a virtual prototyping environment. In: Proceedings of the 5th national conference on rapid design, prototyping and manufacture. , pp. 37-44.

Counsell, J. M. (1997) Design principles for mechatronic systems. In: Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Lancaster University: Lancaster Engineering Design Centre, Lancaster, pp. 17-26. ISBN 1862200262

Counsell, J. M. and Dawson, D. (1999) CACD and further developments. In: Proceedings of the 1999 Lancaster international workshop on engineering design: Computer-aided conceptual design ’99 (CACD ’99). , Windermere, pp. 165-170.

Counsell, J. M. and Porter, I. (1998) Schemebuilder mechatronics: design principles for controller design. In: Proceedings of ICAM ’98. , Okayama, Japan.

Counsell, J. M. and Porter, I. and Duffy, M. (1998) Schemebuilder: CACD for mechanism motion control. In: Proceedings of a workshop on power transmission and motion control. University of Bath.

Coveney, J. A. and Peyton, A. J. and Kyllo, A. K. and Pham, M. H. and Gray, N. B. (2003) Development of an eddy current system for monitoring taphole operations. In: Proceedings of the 3rd world congress on industrial process tomography. , pp. 377-383.

Cross, P. and Taylor, C. James and Aggidis, A. (2009) Feed-forward control of a nonlinear power take-off simulation for wave energy conversion. In: 20th International Conference on Systems Engineering. .

D'Mellow, Bob and Jarrah, Z. and Joyce, Malcolm J. (2005) The Design of a Portable Neutron Spectrometer. In: Proceedings of the 9th European nuclear conference (ENC 2005). .

Darnell, M. and Grayson, M. and Honary, B. (1993) New techniques for word synchronisation. In: Proceedings of Eurocode 1992. Springer-Verlag, pp. 331-351.

Darnell, M. and Honary, B. and Grayson, M. and Zolghadr, F. (1993) A novel DSP-based data synchronisation technique. In: Proceedings of IEEE ICC '93. , Geneva, pp. 821-826.

Darnell, M. and Honary, B. and Markarian, G. S. and Ng, T. (1993) Electromagnetic interference control by spectral shaping. In: Proceedings of EMC '93. , Zurich, pp. 551-563.

Darnell, M. and Honary, B. and Vongas, G. (1992) Adaptive communication system design for HF/VHF multiple-mechanism propagation paths. In: IEEE military communications conference. , San Diego, pp. 1053-1058.

Darnell, M. and Honary, B. and Yung, H. N. and Charbit, G. and Harris, R. (1992) Design and stimulation of FHSS systems for UHF aeromobile channels. In: IEEE military communications conference. , San Diego, pp. 463-468.

Davies, A. T. and Bradshaw, A. (1993) Solution and transputer computation of the forward geometry of a manipulator with fully parallel architecture. In: Robotics: applied mathematics and computations aspects. Clarendon Press, Oxford, pp. 391-402.

Dawson, D. (1992) Fluid power actuators. In: Actuators for control and measurement. IOP Publishing, Philadelphia.

Dawson, Richard and Kelsall, Geoff (2005) Recovery of platinum group metals for spent alumina supported catalysts. In: 7th European Symposium in Electrochemical Engineering. , pp. 449-454.

De Venuto, D. and Compagne, E. and Richardson, Andrew M. D. (2003) Investigations into testability improvements on a 16 bit audio sigma-delta ADC through the use of on-chip techniques. In: Proceedings of IMSTW 2003. .

Dewar, R. J. and Joyce, Malcolm J. (2005) The Quartz Crystal Microbalance as a Microviscometer for Improved Rehabilitation Therapy of Dysphagic Patients. In: 27th Annual International Conference of the Engineering in Medicine and Biology Society, 2005. IEEE-EMBS 2005. , pp. 2511-2515.

Di Carlo, A. and Mineo, Mauro and Paoloni, C. and Durand, A. J. and Krozer, V. and Kotiranta, M. and Bouamrane, F. and Bouvet, T. and Megtert, S. (2012) Vacuum tube amplifier of the opther Project for 1-THz amplification. In: Plasma Science (ICOPS), 2012 Abstracts IEEE International Conference on. IEEE, 7B-2. ISBN 9781457721274

Di Carlo, A. and Paoloni, C. and Brunetti, F. and Terranova, M. L. and Durand, A. and Marchesin, R. and Pham, K. and Krozer, V. and Fiorello, A. and Dispenza, M. and Pribat, D. and Megtert, S. and Schnell, J. P. and Guiset, P. and Legagneux, P. and Dolfi, D. and de Rossi, A. (2009) The European Project OPTHER for the development of a THz tube amplifier. In: 2009 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. IEEE, NEW YORK, pp. 100-101. ISBN 978-1-4244-3500-5

Di Carlo, Aldo and Pecchia, Alessandro and Petrolati, Eleonora and Paoloni, Claudio (2006) Modelling of carbon nanotube-based devices: from nanoFETs to THz emitters - art. no. 632808. In: Nanomodeling II. SPIE-INT SOC OPTICAL ENGINEERING, BELLINGHAM, p. 32808. ISBN 0-8194-6407-4

Dickinson, S. J. and Binns, R. and Yin, W. and Davis, C. and Peyton, A. J. (2005) The development of a multi-frequency electromagnetic instrument for monitoring the phase transformation of hot strip steel. In: Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2005. IMTC 2005. , pp. 1091-1096.

Dickinson, S. J. and Peyton, A. J. (2001) A high speed, multi-frequency impedance analysing node. In: Proceedings of the 2nd world congress on industrial process tomography. , pp. 502-510.

Dickinson, Stephen J. (2003) Unified aggregate component modelling of dynamic mechatronic systems using bond graphs. In: Proceedings of the EEUG workshop. , pp. 6-12.

Dickinson, Stephen J. and Binns, R. and Peyton, A. J. and Yin, W. (2003) Depth profile scanning of cylindrical bar and wire using a spectroscopic direct current injection technique. In: Proceedings of the 3rd world congress on industrial process tomography. , pp. 39-44.

Dickinson, Stephen J. and Peyton, A. J. (2003) Multi-frequency current injection model inversion for determining coating thickness and electromagnetic material properties of cylindrical metal bar or wire. In: Proceedings of the IOP conference – sensors and their applications XII. , pp. 135-140.

Dispenza, M. and Brunetti, F. and Cojocaru, C. -S. and de Rossi, A. and Di Carlo, A. and Dolfi, D. and Durand, A. and Fiorello, A. M. and Gohier, A. and Guiset, P. and Kotiranta, M. and Krozer, V. and Legagneux, P. and Marchesin, R. and Megtert, S. and Bouamrane, F. and Mineo, Mauro and Paoloni, C. and Pham, K. and Schnell, J. P. and Secchi, A. and Tamburri, E. and Terranova, M. L. and Ulisse, G. and Zhurbenko, V. (2010) Towards a THz Backward Wave Amplifier in European OPTHER project. In: MILLIMETRE WAVE AND TERAHERTZ SENSORS AND TECHNOLOGY III. SPIE-INT SOC OPTICAL ENGINEERING, BELLINGHAM, -. ISBN 978-0-8194-8355-3

Dixon, R. and Taylor, C. James and Shaban, E. M. (2005) Comparison of classical and modern control applied to an excavator-arm. In: International Federation of Automatic Control 16th Triennial World Congress. .

Dorey, A. P. and Bradley, D. A. (1992) Integrating electronics with mechanical engineering. In: 6th conference on teaching electronic engineering in degree courses. University of Hull, 28.1-28.8.

Dotchev, K. D. and Chaplin, R. V. (1994) Simulation of a vehicle traction control system at the conceptual stage. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton, pp. 467-473.

Dumas, Norbert and Xu, Zhou and Georgopoulos, Kostas and Bunyan, John and Richardson, Andrew (2007) Online sensor testing through superposition of encoded stimulus. In: Proceedings of the Design, Test, Integration and Packaging of MEMS/MOEMS, Stresa, Lago Maggiore, Italy, 25-27 April 2007. . ISBN 978-2-3550-0000-3

Eghlio, R. M. and Pinkerton, A. J. and Li, Lin (2010) Net shape laser butt welding of mild steel sheets. In: Proceedings of the 36th International Matador Conference. Springer, London, pp. 267-270. ISBN 978-1-84996-431-9

Eghlio, R. M. and Pinkerton, A.J. and Li, L. (2009) Fibre laser net-shape welding of steels. In: Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 1402-1408.

Eghlio, R. M. and Pinkerton, A.J. and Sezer, H. K. and Li, L. (2010) Process characteristics of single mode fibre laser net shape welding. In: Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America.

El-zaroug, Omar and Forth, John and Ye, Jianqiao and Beeby, Andrew (2006) Flexural performance of concrete slabs reinforced with GFRP and subjected to different thermal histories. In: 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures. University of Patras, Patras, Greece.

Enright, R. and Martin, I. and Honary, B. and Darnell, M. (1994) DSP based long range radio system. In: Proceedings of the third UK/Australian international symposium on DSP for communications systems. , Warwick, pp. 87-92.

Exadaktylos, V. and Silva, M. and Aerts, J.-M. and Taylor, C. James and Ferrari, S. and Guarino, M. and Berckmans, D. (2007) Frequency analysis for real-time identification of sick pigs and disease monitoring in pig houses. In: Precision livestock farming '07. Wageningen Academic Publishers, Wageningen, pp. 125-131. ISBN 978-90-8686-023-4

Exadaktylos, V. and Taylor, C. James and Chotai, Arun (2008) Constraint handling for state dependent parameter models. In: Proceedings of the UKACC International Conference on Control. .

Fan, P. Z. and Darnell, M. and Honary, B. (1994) Polyphase sequences with good periodic and aperiodic autocorrelations. In: Proceedings of the 1994 international symposium on information theory. IEEE Service Centre, p. 74.

Findlay, J. D. and Seward, D. W. and Mure, J. N. and Scott, J. (1998) Developments in the piling process through advances in technology. In: The value of geotechnics in construction. Institution of Civil Engineers, London. ISBN 1860812511.

French, M. J. (1992) Design principles. In: Royal Academy of Engineering conference. Sheffield University.

French, M. J. (1997) Prospects for progress in mechanical design. In: Proceedings of the plenary opening lecture at ASME '97: design engineering technical conferences. , Sacramento.

French, M. J. (1996) Systematic design of an extensible membrane for LNG carrier tanks. In: Proceedings of the 6th international offshore and polar engineering conference (ISOPE). International Society of Offshore and Polar Engineers, pp. 529-532. ISBN 1880653222.

French, M. J. and Bracewell, R. H. (1996) The systematic design of economic wave energy converters. In: Proceedings of the 6th international offshore and polar engineering conference (ISOPE). International Society of Offshore and Polar Engineers, pp. 106-109. ISBN 1880653222.

French, M. J. and Chaplin, R. V. and Langdon, P. M. (1993) A creativity aid for designers. In: Proceedings of ICED '93. Heurista, Zurich.

Ganah, A. A. and Kamara, J. M. and Aurigi, A. (2005) A framework for assessing the impact of ICT on architectural design. In: Proceedings of the 3rd International Conference on Innovation in Architecture, Engineering and Construction. , pp. 407-416.

Geng, R. L. and Belomestnykh, S. and Padamsee, H. and Reilly, J. and Goudket, P. and Dykes, D. M. and Carter, Richard G. (2002) Multipacting induced breakdown in rectangular waveguide couplers. In: Proceedings of the workshop on superconducting RF. .

Georgopoulos, K. and Burbidge, M. and Lechner, A. and Richardson, Andrew M. D. (2005) Investigation into the Use of Alternative Transformation Techniques for High-Resolution A/D Converter Testing. In: Proceedings of the IEEE Mixed Signal Test Workshop. .

Georgopoulos, Konstantinos (2005) Novel test solutions for dynamic performance parameter testing of high-resolution converters. In: Proceedings of the DATE workshop on Test of High-Resolution Mixed-Signal Interfaces. .

Ghavipanjeh, F. and Taylor, C. J. and Chotai, A. and Young, P. C. (2000) Modelling and PIP control of dissolved oxygen in a wastewater treatment benchmark system. In: Proceedings of the UKACC international conference on control 2000. .

Ghavipanjeh, F. and Taylor, C. J. and Young, P. C. and Chotai, A. (2000) Data-based modelling and proportional integral plus (PIP) control of nitrate in an activated sludge benchmark. In: Proceedings of Aquatech: conference on wastewater and EU nutrient guidelines. , Amsterdam.

Ghosh, T. K. and Carter, Richard G. and Yadav, V. and Joshi, Y. and Guptra, R. and Srivastava, A. and Vishwanath, R. and Joshi, S. N. (2004) An improved magnetic field simulator - MAGFLD. In: Proceedings of the 5th IEEE international vacuum electronics conference (IVEC 2004). , pp. 318-319. ISBN 0-7803-8261-7

Ghosh, T. K. and Srivastava, A. and Agarwal, P. and Maurya, S. and Srivastava, V. and Carter, Richard G. (2004) A secondary electron emission model for multistage collectors. In: Proceedings of the displays and vacuum electronics conference. , pp. 389-394.

Giannini, F. and Paoloni, C. and Vrba, J. (1986) Losses in Microstrip Radial Stubs. In: Microwave Conference, 1986. 16th European. IEEE, pp. 523-528.

Goss, D. and Mackin, R. O. and Crescenzo, E. and Tapp, H. S. and Peyton, A. J. (2003) Development of electromagnetic inductance tomography (EMT) hardware for determining human body composition. In: Proceedings of the 3rd world congress on industrial process tomography. , pp. 828-833.

Goss, D. and Mackin, R. O. and Crescenzo, E. and Tapp, H. S. and Peyton, A. J. (2003) Understanding the coupling mechanism in high frequency EMT. In: Proceedings of the 3rd world congress on industrial process tomography. , pp. 364-369.

Goudket, P. and Bellantoni, L. and Edwards, H. and Foley, M. and Khabiboulline, T. and Mitchell, D. and Rowe, N. and Solyak, N. and Burt, G. and Dexter, A. and Koeth, T. and Adolphsen, C. (2006) Status of 3.9 GHz defelecting mode (crab) cavity R&D. In: Proceedings of the LINAC 2006 conference. .

Grange, M. and Weldezion, A. Y. and Pamunuwa, Dinesh Bandara and Weerasekera, R. and Zhonghai, Lu and Jantsch, A. and Shippen, D. (2009) Physical Mapping and Performance Study of a Multi-Clock 3-Dimensional Network-on-Chip Mesh. In: Proceedings of the IEEE International Conference on 3D System Integration (3D IC), 2009. IEEE, San Francisco. ISBN 978-1-4244-4511-0

Grayson, M. and Darnell, M. and Honary, B. (1992) An adaptive symbol synchronization algorithm suited to DSP implementation. In: First international symposium on DSP for communication systems. University of Warwick, Warwick, pp. 60-62.

Green, Sarah and Attar, F. G. and Bhattacharya, R. and Port, A. (2007) Cement pressurisation in flanged and unflanged acetabular cups. In: Proceedings 8th EFORT Congress, Florence, Italy. European Federation of National Associations of Orthopaedics and Traumatology, Florence, Italy, P486.

Green, Sarah and Chuter, G. S. J. and Cloke, D. J. and Mohamed, A. and Partington, P. F. (2007) Wear analysis of failed acetabular polyethylene: A comparison of analytical methods. In: Proceedings 8th EFORT Congress, Florence. European Federation of National Associations of Orthopaedics and Traumatology, Florence, Italy.

Green, Sarah and Elfick, A. P. and Unsworth, A. (2001) The absence of nanometre sized UHMWPE wear particles retrieved from ex-vivo tissue. In: Trans 4th Combined meeting Orthopaedic Research Societies of the USA, Europe Canada and Japan. Orthopaedic research society, Chicago, Ill., p. 93.

Green, Sarah and Elfick, Alistair P. D. and Liu, C. (2001) How size affects the mobility of THR wear debris. In: European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001. European Society for Biomaterials, London, T41.

Green, Sarah and Grant, D.M. and Wood, J. V. (2000) Cytomcompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay. In: Processing and fabrication of advanced materials VIII : proceedings of a symposium ... September 8-10, 1999, Mandarin Hotel, Orchard Road, Singapore. World Scientific Publishing, Singapore, pp. 141-148. ISBN 981-02-4575-0

Green, Sarah and Gregg, P. and Liu, C. and Watkins, N. D. and McCaskie, A. W. (2002) Migration of a cemented hip joint prosthesis within a novel composite femur. In: International conference engineers & surgeons - joined at the hip. Institution of Mechanical Engineers, London, C601.

Green, Sarah and Kadakia, A. and Partington, P. F. (2007) Fixation strength of cemented Birmingham (HA coated, cementless) cups - a biomechanical study. In: Proceedings 8th EFORT congress, Florence, Italy. European Federation of National Associations of Orthopaedics and Traumatology.

Green, Sarah and Liu, C. and Watkins, N. D. and Gregg, P. J. and McCaskie, A. W. (2001) Compression failure mode of two CMW bone cements. In: European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001. European Society for Biomaterials, London, P51.

Green, Sarah and Liu, C. and Watkins, N. D. and Gregg, P. J. and McCaskie, A. W. (2000) The dependence of recovery behaviour on mechanical properties of bone cement. In: PIMS 2000 : 9th International Conference on Polymers in Medicine & Surgery, 11 - 13 September 2000, Danube University, Krems, Austria. IOM communications, London, p. 89. ISBN 9781861251268

Green, Sarah and Liu, C. and Watkins, N. D. and McCaskie, A. W. (2000) Comparative analysis of bone cement fracture surfaces. In: 11th International Conference on Deformation, Yield and Fracture of Polymers : 10 - 13 April 2000, Churchill College, Cambridge, UK. IOM communications, Cambridge, pp. 325-328. ISBN 1-86125-120-3

Green, Sarah and Scholes, S. C. and Unsworth, A. (2002) Nanoscale wear degradation of alumina femoral head bearing surfaces assessed using an atomic force microscope. In: International conference engineers & surgeons - joined at the hip. Institution of Mechanical Engineers, London, C601/036.

Grout, I. and Murphy, J. and Burbidge, M. and Bell, G. and Manners, A. (2005) Development of a remote access facility for a PLL test course. In: Proceedings of the remote experimentation and virtual instrumentation symposium. .

Grout, I. A. and Burge, S. E. and Dorey, A. P. (1994) ASICs for monitoring and controlling electric motors. In: Application Specific Integrated Circuits for Measurement Systems, IEE Colloquium on. IET Press, 10/1-10/4.

Grout, I. A. and Burge, S. E. and Dorey, A. P. (1994) Application specific integrated circuit processors for discrete-time control. In: Proceedings of the Irish DSP and control colloquium. , Dubai, pp. 277-282.

Gunn, K. and Taylor, C. James and Lingwood, C. (2009) Evolutionary algorithms for the development and optimisation of wave energy converter control systems. In: 8th European Wave and Tidal Energy Conference. .

Gunn, Kester and Lingwood, Chris and Taylor, C. James (2010) Multi-objective evolutionary optimisation of the geometry of a class of controlled wave energy converter. In: UKACC International Conference Control 2010. , pp. 349-354. ISBN 978-184600-0386

Hambali, Ruzy Haryati and Rennie, Allan and McGovern, Jim (2012) Physical Analysis of Maximum Strength of Additive Manufactured Parts: A Case-Based Study. In: 2nd International Conference on Arts, Social Sciences & Technology. , Penang, Malaysia. ISBN 978-983-44499-1-9

Hambali, Ruzy Haryati and Vaudelin, Maeva and Rennie, Allan (2012) Optimisation of Build Orientation for FDM Additive Manufactured Products. In: International Conference on Applications and Design in Mechanical Engineering (ICADME 2012). School of Mechatronic Engineering, UniMAP, Perlis, Malaysia. ISBN 978-967-5760-08-2

Hannaford, C. D. (1995) Coding for both protection and synchronisation. In: Proceedings of the third international symposium on communications theory and applications. IEE, Ambleside, pp. 48-52.

Harvey, Russell and Richardson, A. M. D. and Baker, K. and Bruls, E. (1994) Analogue Fault Simulation Based on Layout-Dependent Fault Models. In: Proceedings of the IEEE International Test Conference on TEST: The Next 25 Years. IEEE Computer Society, Washington, DC, USA, pp. 641-649. ISBN 0-7803-2103-0.

Hasan, Saad and Rennie, Allan (2008) A Comprehensive Business Model for Rapid Manufactured Products. In: 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. DAAAM International, Vienna, pp. 591-592. ISBN 978-3-901509-68-1

Hemami, A. and Seward, D. W. and Quayle, S. (1999) Some experimental force analysis for automation of excavation by a backhoe excavator. In: Proceedings of the 16th IAARC/IFAC/IEEE international symposium on automation and robotics in construction. , Madrid, pp. 503-508.

Heudorfer, B. and Dawson, D. (1994) A 'smart' tool mounting system to enable the robotic deflashing of moulded products in flexible material. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton, pp. 379-384.

Higson, S. R. and Drake, P. and Stamp, D. W. and Peyton, A. J. and Binns, R. and Lyons, A. and Lionheart, W. R. B. (2002) Development of a sensor for visualisation of steel flow in the continuous casting nozzle. In: Proceedings of the 21st international ATS steelmaking conference. .

Honary, B. (1994) Code assisted frame and symbol synchronisation. In: Proceedings of the 2nd international symposium: DSP for communication systems. , Adelaide.

Honary, B. and Bahrami, M. and Darnell, M. (1992) Combined Huffman and trellis decoders for data transmission. In: IEE international conference on data transmission - Advances in Modem and ISDN Technology and Applications. , London, pp. 47-55.

Honary, B. and Darnell, M. (1994) Extraction and application of channel state data in digital communications schemes. In: Communications theory and applications II. .

Honary, B. and Darnell, M. and Markarian, G. S. and Ng, T. (1992) Coding for spectrum management. In: IEE eighth international conference on electromagnetic compatibility. , Edinburgh, pp. 336-339.

Honary, B. and Darnell, M. and Vongas, G. (1994) Adaptive coding for 2-200MHz multiple-mechanism radio paths. In: Proceedings of the sixth international conference on HF radio systems and techniques. IEE, London, pp. 364-370.

Honary, B. and Darnell, M. and Vongas, G. (1993) Adaptive error control schemes for MMPPs. In: Proceedings of the 53rd AGARD-EPP symposium on multiple mechanism propagation paths. , Rotterdam.

Honary, B. and Edgar, J. (1994) Low complexity implementation of modified McEliece algorithms. In: Proceedings of the IEE colloquium on security and cryptography applications to radio systems. , London, 12/1-2.

Honary, B. and Markarian, G. S. (1994) Array decomposition of the Reed-Solomon codes. In: Communications: the global bridge. IEEE, London.

Honary, B. and Markarian, G. S. (1993) Minimal trellises of Q-ary (Q>2) linear block codes. In: Proceedings of the fourth IMA international conference on cryptography and coding. , Cirencester.

Honary, B. and Markarian, G. S. (1993) RLL/FEC design based on generalised array codes. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 227-228.

Honary, B. and Markarian, G. S. (1993) Trellis decoding for block codes. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 224-226.

Honary, B. and Markarian, G. S. and Darnell, M. (1994) Adaptive nested trellis decoding for block codes. In: IEEE Global Telecommunications Conference, 1994. GLOBECOM '94. 'Communications: The Global Bridge'. IEEE, pp. 682-686.

Honary, B. and Markarian, G. S. and Darnell, M. (1994) Novel nested trellis decoding technique for linear block codes. In: Communications: the global bridge. , pp. 31-35.

Honary, B. and Markarian, G. S. and Darnell, M. (1994) Trellis decoding for block codes. In: Communications theory and applications II. , pp. 79-94.

Honary, B. and Markarian, G. S. and Darnell, M. and Kaya, L. (1993) Trellis decoding technique for array codes. In: Eurocode '92. Courses and lectures . , Wien, n/a. ISBN 9783211825198

Honary, B. and Markarian, G. S. and Naderi, M. (1994) RLL/FEC design based on generalised array codes. In: Communications theory and applications II. , pp. 94-107.

Honary, F. and Stocker, A. J. and Robinson, T. R. and Rietveld, M. T. and McCrea, I. W. (1997) Multi-diagnostic observations of heater-induced effects at pump frequencies close to the electron gyroharmonics. In: Proceedings of the 8th EISCAT international workshop. , Leicester.

Hoyle, C. and Peyton, A. J. (1998) Bootstrapping techniques to improve the bandwidth of transimpedance amplifiers. In: IEE Colloguium on Analog Signal Processing (Ref. No. 1998/472). IEE, Oxford, 7/1-7/6.

Hu, B. and Glover, P. and Benson, T. (2011) A GPU accelerated modeling of bio-effects associated with magnetic resonance imaging. In: Computational Problem-Solving (ICCP), 2011 International Conference on. IEEE, pp. 431-435. ISBN 978-1-4577-0602-8

Hu, B. and Glover, P. and Benson, T. (2011) Simulation guided design of a cryogenic probe for micrometer-scale in vivo MR imaging. In: Computational Problem-Solving (ICCP), 2011 International Conference on. IEEE, pp. 647-651. ISBN 978-1-4577-0602-8

Hu, B. and Ma, Xiandong and Joyce, Malcolm and Glover, P and Naleem, B. (2012) A GPGPU accelerated compressed sensing with tight wavelet frame transform technique for MR imaging reconstruction. In: Imaging Systems and Techniques (IST), 2012 IEEE International Conference on. IEEE, pp. 121-125. ISBN 978-1-4577-1776-5

Hunt, B. and Honary, B. (1993) Code assisted bit synchronisation for an MPSK modem. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 91-92.

Ibarra-Medina, J. and Pinkerton, A. J. (2010) The influence of powder stream shape and substrate position on mass addition in laser cladding. In: Proceedings of the 24th International Conference on Surface Modification Technologies. Valardocs. ISBN 978-81-910571-2-6

Ibarra-Medina, Juansethi and Vogel, M. and Pinkerton, A.J. (2011) A CFD model of laser cladding: From deposition head to melt pool dynamics. In: Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 378-386.

Jacobson, D.M and Bocking, C. E. and Rennie, Allan (2002) Injection Mould Tool Manufacture in Less Than Five Days. In: RAPRA Rapid Tooling Conference 2002. RAPRA, pp. 35-43. ISBN 978-1-85957-313-6

Jamaluddin, N. and Lam, D. and Ye, J. (2010) Experimental studies of elliptical concrete-filled tube columns. In: TUBULAR STRUCTURES XIII. CRC PRESS-TAYLOR & FRANCIS GROUP, BOCA RATON, pp. 333-340. ISBN 978-0-415-58473-9

Jamaluddin, N. and Lam, D. and Ye, J. (2009) Finite Element Analysis of Elliptical Stub CFT Columns. In: Steel Concrete Composite and Hybrid Structures. Research Publishing Services, Singapore, pp. 265-270. ISBN 978-981-08-3068-7

Jamil, M.S.C. and Pinkerton, A.J. and Li, L. and Sheikh, M.A. (2010) The effect of beam geometry on diode laser forming of sheet metals. In: Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 495-502.

Jeffery, C. and Bunyan, R. J. T. and Combes, D. and King, D. O. and Richardson, Andrew M. D. (2005) Design Considerations for On-line Testing of a Capacitive Accelerometer. In: Proceedings of the 11th IEEE International Mixed-Signals Testing Workshop. , pp. 220-223.

Jeffery, C. and Cutajar, R. and Richardson, Andrew M. D. and Prosser, S. and Lickess, M. and Riches, S. (2005) The integration of on-line monitoring and reconfiguration functions using IEEE1149.4 into a safety critical automotive electronic control unit. In: Proceedings of Design, Automation and Test in Europe, 2005. , pp. 153-158.

Jeffery, C. and Rosing, R. and Richardson, A. M. D. (2000) Applications of mixed signal test strategies to next generation microsystems. In: Design, modeling, and simulation in microelectronics. SPIE (Society of Photo-Optical Instrumentation Engineers), pp. 21-32. ISBN 0-8194-3900-2.

Jeffery, C. and Rosing, R. and Richardson, A. M. D. (2000) A built-in test solution for a SMART silicon micromachined resonant pressure sensor. In: IEEE European Test Workshop. IEEE. ISBN 0-7695-0701-8.

Jeffrey, C. and Lechner, A. and Richardson, Andrew M. D. (2003) Re-using IEEE1149.4 as an infrastructure for online monitoring. In: Proceedings of the 9th IEEE international mixed signal test workshop (IMSTW03). , pp. 247-249.

Jenkins, R. O. and Carter, Richard G. (2001) Design of the pitch profile for high linearity helix TWT amplifiers. In: Proceedings of a conference on displays and vacuum electronics. .

Jenkins, R. O. and Carter, Richard G. (2002) Effect of beam parameters on the non-linear performance in broadband helix TWTs. In: Third IEEE International Vacuum Electronics Conference, 2002. IVEC 2002. , pp. 286-287. ISBN 0-7803-7256-5

Jenkins, R. O. and Carter, Richard G. (2001) Use of electron bunching diagrams for the design of pitch profiles in helix TWTs. In: Proceedings of IVEC ’2001. .

Kamara, A. M. and Wang, W. and Marimuthu, S. and Pinkerton, A. J. and Li, L. (2010) Influence of melt pool convection on residual stress induced in laser cladding and powder deposition. In: Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America.

Kaufman, John and Rennie, Allan and Quayle, Stephen (2011) Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs. In: Rapid Design, Prototyping and Manufacturing. CRDM Ltd, pp. 135-143. ISBN 978-0-9566643-1-0

Kemp, Roger (2006) Regulating incalculable risks : the link between risk measurement and risk regulation. In: Proceedings of the EPSRC network conference on risk perception and assessment in design. .

Khan, M. and Vogel, M. and Ibarra-Medina, J. and Pinkerton, A. J. and N'Dri, N. and Megahed, M. (2012) Analysis and simulation of the effects of melt pool flow during laser deposition of a multiphase material. In: Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, Paper P133.

Kobayashi, H. and Ishikawa, K. and Turvey, G. J. (1994) On bending of rhombic plates. In: Proceedings of the annual conference of Japanese society of civil engineers. .

Koltsov, Denis (2006) Nanometer magnets. In: McGraw-Hill yearbook of science and technology. McGraw-Hill, pp. 205-208.

Kontoroupis, P. and Young, P. C. and Chotai, Arun and Taylor, C. James (2003) State dependent parameter – proportional integral plus (SDP-PIP) control of non-linear systems. In: Proceedings of the 16th international conference on systems engineering (ICSE2003). , pp. 373-378.

Kotsialos, A. and Ellouni, N. and Middelham, F. and van Schuppen, J. and Taylor, C. James (1998) DACCORD: integrated and co-ordinated control. In: 8th World Conference on Transportation Research. Pergamon. ISBN 0-08-043590-4

Kumar, L. and Carter, R. G. (1996) 3-D simulation of a soft-landing tilted electric field collector for linear beam tubes. In: Proceedings of the Asia-Pacific microwave conference. , New Delhi.

Kumar, L. and Carter, R. G. (1994) Tilted electric field collector. In: Proceedings of the 4th international conference on charged particle optics. , Japan.

Lam, D. and Ye, J. Q. and Fu, F. (2006) Finite element modelung of semi-rigid composite joints with precast hollow core slabs. In: 8th International Conference on Steel-Concrete Composite and Hybrid Structures, Proceedings. HARBIN INSTITUTE TECHNOLOGY PUBLISHERS, Harbin, China, pp. 426-433.

Lam, Dennis and Dai, Xianhe and Jamaluddin, Norwati and Ye, Jianqiao (2011) Buckling behaviour of concrete- filled elliptical steel columns. In: 7th International Conference on Steel & Aluminium Structures (ICSAS2011), Kuching, Sarawak, Malaysia. . ISBN 978-981-08-9247-0

Lam, Dennis and Qureshi, Jawed and Ye, Jianqiao (2011) Effects of Shear Connector's Position in Profiled Sheeting on Strength and Ductility. In: 5th International Conference on Steel & Composite Structures, Seoul, Korea. .

Lam, Dennis and Ye, Jianqiao and Fu, Feng (2008) Analytical model of semi-rigid composite joints with steel beams and precast hollowcore slabs. In: Structures Congress 2007. ASCE. ISBN 978-0-7844-0810-0

Lam, Dennis and Ye, Jianqiao and Qureshi, Jawed (2010) Composite Behaviour of Headed Stud Shear Connectors in Pairs with Profiled Metal Deck Flooring. In: 4th International Conference on Steel & Composite Structures. .

Langdon, P. M. and Cheung, H. F. (1994) A hypertext documentation system for schemebuilder: the mechatronics book. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton, pp. 21-23.

Lechner, A. and Burbidge, M. J. and Richardson, Andrew M. D. and Hermes, B. (2001) 3DB challenge for DfT, DfM, DOT and BIST integration into analogue and mixed signal ICs. In: Proceedings of the 2nd Latin-American test workshop (LATW ’01). , pp. 194-199.

Lechner, A. and Richardson, A. M. D. and Hermes, B. and Ohletz, M. (1998) A design for testability study on a high performance automatic gain control circuit. In: Proceedings of the 16th IEEE VLSI test symposium. IEEE, pp. 376-385.

Lechner, A. and Richardson, A. M. D. and Hermes, B. and Perkins, A. (1998) Design for testability strategies for a high performance gain control circuit. In: Proceedings of the international IEEE mixed signal test workshop. The Hague.

Lechner, A. and Richardson, Andrew M. D. and Burbidge, M. and Hermes, B. (2001) A failure mode analysis of a 6-bit folding ADCs. In: Proceedings of the 7th IEEE international mixed-signal testing workshop (IMSTW ’01). , pp. 19-23.

Lechner, A. and Richardson, Andrew M. D. and Hermes, B. (2001) Short circuit faults in state-of-the-art ADCs – are they hard or soft? In: 10th Asian Test Symposium : proceedings. IEEE Computer Society, pp. 417-422. ISBN 0769513786 9780769513782

Lechner, A. and Richardson, Andrew M. D. and Hermes, B. (2001) Towards a better understanding of failure modes and test requirements of ADCs. In: Proceedings of a conference: automation and test in Europe (DATE ’01). , p. 803.

Lei, Ci and Pamunuwa, Dinesh B. and Bailey, Stephen and Lambert, Colin (2008) Application of molecular electronics devices in digital circuit design. In: Nano-Net Third International ICST Conference, NanoNet 2008, Boston, MA, USA, September 14-16, 2008, Revised Selected Papers. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering . Springer, Berlin, pp. 61-65. ISBN 978-3-642-02426-9

Lei, Ci and Pamunuwa, Dinesh B. and Bailey, Stephen and Lambert, Colin (2009) Design of robust molecular electronic circuits. In: IEEE International Symposium on Circuits and Systems, 2009. ISCAS 2009. IEEE, Taiwan, pp. 1819-1822. ISBN 978-1-4244-3827-3

Lei, Ci and Pamunuwa, Dinesh B. and Bailey, Stephen and Lambert, Colin (2007) Molecular electronics device modeling for system design. In: Proc. IEEE International Conference on Nanotechnology. IEEE, Hong Kong, pp. 1116-1119. ISBN 1-4244-0608-0

Lei, Ci and Pamunuwa, Dinesh Bandara and Bailey, Stephen and Lambert, Colin (2009) Designing reliable digital molecular electronic circuits. In: Nano-Net 4th International ICST Conference, Nano-Net 2009, Lucerne, Switzerland, October 18-20, 2009. Proceedings. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering . Springer, Berlin, pp. 111-115. ISBN 978-3-642-04849-4

Leigh, P. and Taylor, C. James and Chotai, Arun and Young, P. C. and Vranken, E. (2003) Implementation of a combined fan and valve control design in a ventilation chamber. In: Proceedings of the 16th international conference on systems engineering (ICSE2003). , pp. 423-428.

Leigh, P. and Taylor, C. James and Price, L. and Chotai, Arun and Young, P. C. (2000) Modelling and proportional integral plus (PIP) control of ventilation rate in a fan test chamber. In: Proceedings of the 15th international conference on systems engineering. .

Leigh, S. and Sezer, K. and Li, L. and Pinkerton, A. J. and Grafton-Reed, C. and Cuttell, M. (2009) Oxide formation in acute laser percussion drilled holes in single crystal nickel superalloy. In: Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 719-728.

Li, M. and Sharpe, John (1994) The use of function mapping in the design of mechatronic systems. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton, pp. 505-509.

Lingwood, Christopher and Carter, Richard and Burt, Graeme (2009) High Efficiency Multiple Beam Klystron (MBK) Stability. In: Vacuum Electronics Conference, 2009. IVEC '09. IEEE International. IEEE, pp. 241-242. ISBN 978-1-4244-3500-5

Lingwood, Christopher and Carter, Richard and Gunn, K. (2009) Evolutionary Algorithms and high efficiency multiple beam klystron (MBK) design. In: Vacuum Electronics Conference, 2009. IVEC '09. IEEE International. IEEE, pp. 112-113. ISBN 978-1-4244-3500-5

Lingwood, Christopher and Carter, Richard and Marchesin, Rodolphe (2008) High efficiency multiple beam klystron (MBK) cavity properties. In: Vacuum Electronics Conference, 2008. IVEC 2008. IEEE International. IEEE, pp. 427-428. ISBN 978-1-4244-1715-5

Lionheart, W. R. B. and Peyton, A. J. and Soleimani, M. (2003) Sensitivity analysis on 3D magnetic induction tomography (MIT). In: Proceedings of the 3rd world congress on industrial process tomography. , pp. 239-244.

Liu, J. and Zheng, Li-Rong and Pamunuwa, Dinesh B. and Tenhunen, Hannu (2003) A global wire planning scheme for Network-on-Chip. In: Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03. , IV-892-IV-895. ISBN 0-7803-7761-3

Lupeanu, Mihaela and Brooks, Hadley and Rennie, Allan and Celik, Kursat and Neagu, Corneliu and Akinci, Ibrahim (2012) Design for Manufacture using Functional Analysis and CAD Mould Simulation for Rapid Prototyping and Rapid Tooling:Paper: ESDA2012-82410. In: ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012). American Society of Mechanical Engineers (ASME), Nantes. ISBN 978-0-7918-4486-1

Lupeanu, Mihaela and Rennie, Allan and Neagu, Corneliu and Celik, Kursat (2011) Product Optimization by Rapid Manufacturing and Targeted Functional Analysis. In: 16th European Forum on Rapid Prototyping and Manufacturing. . ISBN 9782748364651

Lyon, G. and Peyton, A. J. and Yu, Z. Z. and Beck, M. S. (1996) Developments in electromagnetic tomography instrumentation. In: IEE Colloguium on Advances in electrical Tomography (Digest No: 1196/143). IEEE, London, 12/1-12/4.

Lyon, G. M. and Peyton, A. J. (1997) Development of a modular data acquisition system for electrical tomography. In: Proceedings of the conference on frontiers in industrial process tomography II. , The Netherlands.

Ma, X. and Peyton, A. J. (2004) Eddy current measurement of the electrical conductivity and porosity of metal foams. In: Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2004. IMTC 04. IEEE, pp. 127-132. ISBN 0-7803-8248-X

Ma, X. and Peyton, A. J. and Soleimani, M. and Lionheart, W. R. B. (2007) Imaging internal structure with electromagnetic induction tomography. In: Instrumentation and Measurement Technology Conference, 2006. IMTC 2006. Proceedings of the IEEE. IEEE, 299 -303. ISBN 0-7803-9359-7

Ma, X. and Zhou, C. and Kemp, I. J. (2004) Novel computer-based processing system for partial discharge detection and diagnosis. In: Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2004. IMTC 04. IEEE, pp. 684-688. ISBN 0-7803-8248-X

Ma, Xiandong (2011) Electromagnetic NDT and condition monitoring - A personal view. In: Proceedings of 2011 17th International Conference on Automation and Computing (ICAC’11). IEEE, pp. 266-271. ISBN 978-1-4673-0000-1

Ma, Xiandong (2012) Novel early warning fault detection for wind-turbine-based DG systems. In: Proceedings of 2011 2nd IEEE PES International Conference and Exhibition on Innovative Smart Grid Technologies (ISGT Europe). IEEE, pp. 1-6. ISBN 978-1-4577-1422-1

Magatin, Roman and Ye, Jianqiao and Jin, Zhongmin (2009) Coefficients for Theory of Adaptive Elasticity and its use in the FEA of remodeling processes in biological tissues. In: 3rd International Conference on Mechanics of Biomaterials and Tissues. .

Mahmood, K. and Stevens, N. and Syed, W. U. H. and Pinkerton, A.J. (2011) Material-efficient laser cladding for corrosion resistance. In: Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 695-704.

Mahmood, Khalid and Khan, Ashfaq and Pinkerton, A. J. (2011) Laser metal deposition of steel components using machining waste as build material. In: Proceedings of CLEO, the IEEE Conference on Lasers and Electro-Optics. IEEE, New York, -. ISBN 978-1-55752-910-7

Mahmood, Khalid and Pinkerton, A. J. and Syed, Waheed Ul Haq (2011) Laser surface cladding of Inconel 617 chips on mild steel. In: Proceedings of the 25th International Conference on Surface Modification Technologies. Valardocs. ISBN 978-81-910571-4-0

Mahmood, Khalid and Syed, W. U. H. and Pinkerton, A.J. (2010) Laser direct deposition of carbon steel machining waste. In: Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 1533-1540.

Margrave, F. W. and Nagy, Z. (1996) A transputer based flexible robot controller. In: Fast Reconfiguration of Robotic and Automation Resources, IEE Colloquium on. IET Press, 8/1-8/6.

Margrave, F. W. and Seward, D. W. (1994) Establishing the safety argument for the use of programmable electronics in transport. In: Proceedings of the 27th ISATA conference: dedicated conferences on mechatronics and supercomputing applications in the transportation industries. Automotive Automation, Croydon, pp. 519-526.

Markarian, G. S. and Honary, B. (1994) The Nordstrom-Robinson code is a (8,4) GAC over Z4. In: Proceedings of the third UK/Australian international symposium on DSP for communications systems. , Warwick, pp. 45-46.

Markarian, G. S. and Honary, B. (1994) Trellis decoding technique for block RLL/RCC codes. In: Proceedings of the 1994 international symposium on information theory. IEEE Service Centre, p. 147.

Markarian, G. S. and Honary, B. and Ali, F. (1992) Collaborative coding multiple access employing Manchester and CMI codes. In: 4th Bangor communications symposium. University of Wales, Bangor, pp. 120-123.

Markarian, G. S. and Honary, B. and Darnell, M. (1993) Code design for a specified power spectrum. In: Proceedings of the 5th Bangor communication symposium. , Bangor, pp. 72-76.

Markarian, G. S. and Honary, B. and Manukian, H. H. (1994) Signal-to-noise ratio measurement employing trellis decoders. In: Proceedings of the sixth international conference on HF radio systems and techniques. IEE, London, pp. 16-20.

Markarian, G. S. and Kissaka, M. and King, D. and Nikogosian, K. (1994) The design of an integrated circuit to implement a new maximum likelihood decoding algorithm. In: DSP for communication systems I. , pp. 55-62.

Markarian, G. S. and Nikogosian, N. and Manukian, H. (1993) Maximum likelihood decoding algorithm adapted for line code used in fibre-optical communications. In: Communication theory and applications I : selected papers from the First International Symposium on Communication Theory and Applications, Crieff, Scotland,1991. Communications and signal processing series (1). HW Communications, Lancaster, pp. 229-238. ISBN 0901800252

McCabe, A. P. and Young, P. C. and Chotai, A. and Taylor, C. James (2000) Proportional-integral-plus (PIP) control of non-linear systems. In: Proceedings of the 15th international conference on systems engineering. , pp. 407-412.

McCabe, Andrew P. and Aggidis, George A. and Stallard, T. J. (2006) Comparable performance characteristics from different test sites. In: Proceedings of the 4th EC co-ordination action on ocean energy workshop - performance monitoring of ocean energy systems (INETI). .

Meadowcroft, J. A. and Stallard, T. J. and Baker, N. J. and Aggidis, George A. (2006) Absorption of energy from irregular waves by a buoyant, surging body. In: Proceedings of the 16th international offshore and polar engineering conference (ISOPE). .

Meadowcroft, J. A. C. and Stallard, T. J. and Baker, N. J. (2005) Comparison of power capture in irregular waves and their regular wave components. In: Proceedings of the 6th European wave and tidal energy conference. .

Mineo, Mauro and Bariou, D. and David, J. F. and Durand, A. J. and Paoloni, C. (2010) Backward Wave Oscillator for THz Frequency Range Based on Double Corrugation Slow-Wave Structure. In: 35TH INTERNATIONAL CONFERENCE ON INFRARED, MILLIMETER, AND TERAHERTZ WAVES (IRMMW-THZ 2010). IEEE, New York, -. ISBN 978-1-4244-6657-3

Mineo, Mauro and Paoloni, C. (2011) Backward wave oscillators for THz applications based on corrugated waveguide. In: Vacuum Electronics Conference (IVEC), 2011 IEEE International. IEEE, pp. 265-266. ISBN 978-1-4244-8662-5

Mineo, Mauro and Paoloni, C. (2010) Improved rod shapes for helix slow wave structures. In: Vacuum Electronics Conference (IVEC), 2010 IEEE International. IEEE, pp. 229-230. ISBN 978-1-4244-7098-3

Mineo, Mauro and Paoloni, C. and Bariou, D. and David, J.-F. and Durand, A.J. (2011) Backward-wave vacuum amplifier for THz amplification. In: Vacuum Electronics Conference (IVEC), 2011 IEEE International. IEEE, 267 -268. ISBN 978-1-4244-8662-5

Mineo, Mauro and Paoloni, C. and Bariou, D. and David, J.-F. and Durand, A.J. (2010) Design method for Double Corrugation Rectangular Waveguide THz vacuum amplifiers. In: Vacuum Electronics Conference (IVEC), 2010 IEEE International. IEEE, 325 -326. ISBN 978-1-4244-7098-3

Mineo, Mauro and Paoloni, Claudio (2009) Design Study of Corrugated Waveguide Slow-Wave Structure for THz Amplification. In: 2009 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. IEEE, NEW YORK, pp. 104-105. ISBN 978-1-4244-3500-5

Mineo, Mauro and Paoloni, Claudio (2009) Helix TWT Yield Improvement by Helix Pitch Optimization. In: 2009 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. IEEE, NEW YORK, pp. 159-160. ISBN 978-1-4244-3500-5

Mineo, Mauro and Paoloni, Claudio (2012) Micro Reentrant Cavity for 100GHz Klystron. In: Vacuum Electronics Conference (IVEC), 2012 IEEE Thirteenth International. IEEE, pp. 65-66. ISBN 978-1-4673-0188-6

Mineo, Mauro and Paoloni, Claudio and Di Carlo, Aldo and Fiorello, Anna Maria and Dispenza, Massimiliano (2009) Corrugated Waveguide Slow-Wave Structure for THz Travelling Wave Tube. In: 2009 EUROPEAN MICROWAVE CONFERENCE, VOLS 1-3. IEEE, NEW YORK, pp. 842-845. ISBN 978-1-4244-4748-0

Mineo, Mauro and Paoloni, Claudio and Durand, Alain J. (2012) Design procedure for THz cascade backward wave amplifiers. In: Vacuum Electronics Conference (IVEC), 2012 IEEE Thirteenth International. IEEE, USA, pp. 235-236. ISBN 978-1-4673-0188-6

Moat, R. J. and Karadge, M. and Pinkerton, A.J. and Deschamps, A. and Bley, F. and Li, L. and Withers, P. J. and Preuss, M. (2007) Intragranular precipitation variations in laser deposited Waspaloy due to compositional inhomogeneities. In: Proceedings of the 136th TMS Annual Meeting. The Minerals, Metals & Materials Society (TMS), pp. 77-86. ISBN 978-087339690-5

Moat, R. J. and Pinkerton, A.J. and Hughes, D. J. and Li, L. and Withers, P. J. and Preuss, M. (2007) Stress distributions in multilayer laser deposited Waspaloy parts measured using neutron diffraction. In: Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America.

Mottram, J. T. and Turvey, G. J. (1998) Semi-rigid behaviour of civil engineering structural connection. In: COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections. European Commission, Brussels/Luxembourg, p. 99.

Mure, N. and Scott, J. N. and Seward, D. W. and Quayle, S. D. (1998) Integrating the business process with automation through object technology in a foundation company. In: Proceedings of ECPPM'98 - the Second European Conference on Product and Process Modelling in the Building Industry. BRE. ISBN 186081249X

Mure, N. and Scott, J. N. and Seward, D. W. and Quayle, S. D. and Clayton, C. R. I. and Rust, M. (2002) Just-in-time continuous flight auger piles using an instrumented auger. In: Proceedings of the 19th international symposium on automation and robotics in construction. .

Nagy, Z. and Bradshaw, A. (1998) Comparison of PI and PDF controls of a manipulator arm. In: Proceedings of the UKACC international conference on control ’98. , Swansea, pp. 739-744.

Nagy, Z. and Bradshaw, A. (1996) On development of a transputer based robot control system. In: Proceedings of the 5th international workshop on robotics in Alpe-Adria-Danube region. Hungarian Robotics Association, Budapest, pp. 125-130.

Nagy, Z. and Bradshaw, A. (1996) A flexible, transputer based robot control. In: Proceedings of the international workshop on advanced robotics and intelligent machines. , Manchester.

Nagy, Z. and Bradshaw, A. (1996) A transputer based, flexible, real-time control system for robotic manipulators. In: Proceedings of the UK UKACC international conference on control '96. , Exeter.

Nagy, Z. and Porter, I. and Bradshaw, A. (2003) Schemebuilder: from conceptual design to control of mechatronic systems. In: Proceedings of the ICOM 2003 conference. .

Narendra, K. and Limiti, E. and Paoloni, C. and Collantes, J.-M. and Jansen, R.H. (2010) Cascaded distributed power amplifier with non-identical transistors and inter-stage tapered impedance. In: Microwave Conference (EuMC), 2010 European. IEEE, 990 -993. ISBN 978-1-4244-7232-1

Narendra, Kumar and Mediano, Arturo and Paoloni, Claudio and Limiti, Ernesto (2008) A Novel Adaptive LDMOS Power Amplifier with Constant Efficiency for Wide Dynamic Power Levels Control. In: 2008 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST, VOLS 1-4. IEEE, NEW YORK, pp. 1500-1503. ISBN 978-1-4244-1780-3

Narendra, Kumar and Paoloni, Claudio and Limiti, Ernesto and Collantes, J. M. (2008) High performance 1.5W pHEMT distributed power amplifier with adjustable inter-stage cascaded network for 10 divided by 2000 MHz. In: PROCEEDINGS OF THE 14TH CONFERENCE ON MICROWAVE TECHNIQUES: COMITE 2008. CZECHSLOVAKIA SECTION IEEE, PRAHA 6, pp. 293-296. ISBN 978-1-4244-2137-4

Narendra, Kumar and Prakash, Chacko and Andrei, Grebermikov and Paoloni, Claudio and Median, Arturo (2008) Design and Computer Simulation of High Efficiency Broadband Parallel-Circuit Class E RF Power Amplifier with Reactance Compensation Technique. In: 2008 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST, VOLS 1-4. IEEE, NEW YORK, pp. 77-80. ISBN 978-1-4244-1780-3

Neagu, Corneliu and Lupeanu, Mihaela and Rennie, Allan (2011) Geometry Optimisation of Tools used in Milling of Spherical Surfaces. In: SIM2011 - Sustainable Intelligent Manufacturing. , Leiria, Portugal, pp. 87-94. ISBN 9789898481030

Neal, R. A. (1999) Industry-based masters courses: a means to develop staff with a minimum of disruption. In: Proceedings of the 10th EAEEIE conference: educational innovations in electrical and information engineering. , Capri, pp. 259-261.

Ni, J. and Honary, B. (1992) System state independent-unique-decodable CCMA codes. In: 4th Bangor communications symposium. University of Warwick, Bangor, pp. 301-307.

Nisar, Salman and Li, L. and Sheikh, M. A. and Pinkerton, A.J. (2009) A comparison of cut path deviation with continuous and pulsed beam modes in diode laser chip-free cutting of glass. In: Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 1070-1079.

Obayya, S. S. A. and Letizia, R. (2007) Multiresolution Time Domain analysis of optical guided-wave devices. In: Computational Electromagnetics in Time-Domain, 2007. CEM-TD 2007. Workshop on. IEEE, New York, pp. 80-83. ISBN 978-1-4244-1169-6

Oh, K. S. V. and Langdon, P. M. (1993) Understanding the human/computer interactions in the design process. In: Proceedings of IMechE seminar on new product engineering data management. IMechE, London.

Oh, K. S. V. and Taleb-Bendiab, A. (1993) Speech-act based communication protocol to support multi-agent cooperative design systems. In: Proceedings of international conference on artificial intelligence in engineering '93. , Toulouse.

Olbrich, T. and Bradley, D. A. and Richardson, A. M. D. (1994) BIST and diagnostics for microsystems. In: Proceedings of the 7th ISATA conference: dedicated conferences on mechatronics and supercomputing applications in the transportation industries. Automotive Automation, Croydon, pp. 575-580.

Olbrich, T. and Bradley, D. A. and Richardson, A. M. D. (1994) Self-test and diagnostics for smart sensors in automotive applications. In: Proceedings of the IEE colloquium on automotive sensors. , 3/1-4.

Olbrich, T. and Grout, I. and Eben Aimine, Y. and Richardson, A. and Contensou, J. (1997) A new methodology for IC product quality estimation. In: Proceedings of the European design and test conference (ED&TC '97). IEEE Computer Society Press, Paris. ISBN 0818677864.

Olbrich, T. and Perez, J. and Grout, I. and Richardson, A. and Ferrer, C. (1996) Defect-oriented vs. chematic-level based fault simulation for mixed-signal ICs. In: Proceedings of the international test conference 1996. , Washington DC, pp. 511-520. ISBN 0780335406

PAOLONI, C and KOBLOWSKI, S (1992) New approach on the design of travelling wave amplifier. In: Proceedings of the 34th Midwest Symposium on Circuits and Systems : the Monterey Sheraton Hotel, Monterey, California, May 14-17, 1991. IEEE, New York, pp. 414-417. ISBN 0-7803-0620-1

PAOLONI, C and KOSSLOWSKY, S (1993) Graphical design method for traveling wave amplifier based on filter theory. In: Microwave Symposium Digest, 1993., IEEE MTT-S International. IEEE, New York, pp. 273-276. ISBN 0-7803-1209-0

Pace, C. and Seward, D. (1998) Development of a safety manager for an autonomous mobile robot. In: Proceedings of the 29th international symposium on robotics 1998: advanced robotics beyond 2000. , Birmingham, pp. 277-282.

Palacin, R. and Kemp, Roger J. (2005) Living up to the myth by enhancing the sustainability of rail. In: Proceedings of the rail research UK (EPSRC) conference. .

Pamunuwa, Dinesh and Weerasekera, Roshan (2006) Nanodevices : from novelty toys to functional devices - an integration perspective. In: Proceedings of the IEEE international conference on industrial and information systems. , 103 -108. ISBN 1-4244-0322-7

Pamunuwa, Dinesh B. (2008) Memory technology for extended large-scale integration in future electronics applications. In: Proc. Design, Automation and Test in Europe (DATE) Conference. IEEE, Munich, pp. 1126-1127. ISBN 978-3-9810801-3-1

Pamunuwa, Dinesh B. and Elassaad, Shauki (2003) Closed form metrics to accurately model the response in general arbitrarily-coupled RC trees. In: Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03. IEEE, IV-604. ISBN 0-7803-7761-3

Pamunuwa, Dinesh B. and Tenhunen, Hannu (2002) On dynamic delay and repeater insertion in distributed capacitively coupled interconnects. In: International Symposium on Quality Electronic Design, 2002. Proceedings. IEEE, pp. 240-245. ISBN 0-7695-1561-4

Pamunuwa, Dinesh B. and Tenhunen, Hannu (2001) Repeater insertion to minimise delay in coupled interconnects. In: Fourteenth International Conference on VLSI Design, 2001. IEEE, Bangalore, India, pp. 513-517. ISBN 0-7695-0831-6

Pamunuwa, Dinesh B. and Zheng, Li-Rong and Tenhunen, Hannu (2000) Combating digital noise in high speed ULSI circuits using binary BCH encoding. In: The 2000 IEEE International Symposium on Circuits and Systems, 2000. Proceedings. ISCAS 2000 Geneva. IEEE, Geneva, pp. 13-16. ISBN 0-7803-5482-6

Pamunuwa, Dinesh B. and Zheng, Li-Rong and Tenhunen, Hannu (1999) Error-control coding to combat digital noise in interconnects for ULSI circuits. In: Proc. IEEE Norchip Conference Oslo 1999. IEEE, Norway, pp. 275-282.

Pamunuwa, Dinesh B. and Zheng, Li-Rong and Tenhunen, Hannu (2002) Optimising bandwidth over deep sub-micron interconnect. In: 2002 IEEE International Symposium on Circuits and Systems. IEEE, IV-193. ISBN 0-7803-7448-7

Pamunuwa, Dinesh B. and Öberg, Johnny and Zheng, Li-Rong and Millberg, Mikael and Jantsch, Axel and Tenhunen, Hannu (2003) Layout, performance and power trade-offs in mesh-based network-on chip architectures. In: Proc. IFIP International Conference on VLSI Systems-on-chip. Technische Universität Darmstadt, Insitute of Microelectronic Systems, Darmstadt, Germany, pp. 362-366. ISBN 3-901882-17-0

Paoloni, C. and Brunetti, F. and Di Carlo, A. and Mineo, Mauro and Tamburri, E. and Terranova, M.L. and Ulisse, G. and Durand, A. and Marchesin, R. and Pham, K. and Krozer, V. and Kotiranta, M. and de Rossi, A. and Dolfi, D. and Guiset, P. and Legagneux, P. and Schnell, J.P. and Fiorello, A. and Dispenza, M. and Secchi, A. and Zhurbenko, V. and Megtert, S. and Bouamrane, F. and Cojocaru, C.-S. and Gohier, A. (2011) The OPTHER project: Progress toward the THz amplifier. In: Vacuum Electronics Conference (IVEC), 2011 IEEE International. IEEE, pp. 55-56. ISBN 978-1-4244-8662-5

Paoloni, C. and Di Carlo, A. and Brunetti, F. and Mineo, Mauro and Ulisse, G. and Durand, A.J. and Krozer, V. and Kotiranta, M. and Fiorello, A.M. and Dispenza, M. and Secchi, A. and Zhurbenko, V. and Boumrane, F. and Bouvet, T. and Megtert, S. and Cojocaru, C.-S. and Gohier, A. (2011) Backward Wave Amplifier Realisation at 1000 GHz Progress whitin EU FP7 OPTHER Project. In: 5th UK-China Workshop on Millimetre-Waves and Terahertz Technologies 2011. , Glasgow.

Paoloni, C. and Mineo, Mauro and Di Carlo, A. and Durand, A. J. and Krozer, V. and Kotiranta, M. and Bouamrane, F. and Bouvet, T. and Megtert, S. (2012) 1-THz Cascade Backward Wave Amplifier. In: Vacuum Electronics Conference (IVEC), 2012 IEEE Thirteenth International. IEEE, pp. 237-238. ISBN 978-1-4673-0188-6

Paoloni, Claudio (2012) Accurate Backward-Wave Interaction Impedance Computation for Corrugated Rectangular Waveguides. In: 5th UK/Europe-China Workshop on Millimeter Waves and Terahertz Technologies. , China.

Paoloni, Claudio and D'Agostino, Stefano (2004) Traveling Wave Tube helix compensation controlling the voltage at the cathode. In: Asian Pacific Microwave Conference 2004. , India.

Paoloni, Claudio and Di Carlo, Aldo (2012) Progetto OPTHER: OPtically Driven Terahertz Amplifiers. In: Fotonica 2012. , Italy.

Paoloni, Claudio and Di Carlo, Aldo and Brunetti, Francesca and Mineo, Mauro and Ulisse, Giacomo and Durand, Alain J. and Krozer, Viktor and Kotiranta, M. and Rossi, A and Dolfi, Daniel and Legagneux, Pierre and Fiorello, Anna Maria and Dispenza, Massimiliano and Secchi, Alberto and Zhurbenko, Vitaly and Megtert, Stephan and Boumrane, Fayçal and Bouvet, thomas and Cojocaru, C. -S. and Gohier, A. (2012) A European Project on Vacuum Tube Amplifiers for THz Amplification. In: 5th UK/Europe-China Workshop on Millimeter Waves and Terahertz Technologies. , China.

Paoloni, Claudio and Mineo, Mauro (2011) Vacuum Electron Tubes for THz Applications. In: Proceedings of the XXX General Assembly and Scientific Symposium of the International Union of Radio Science (Union Radio Scientifique Internationale-URSI. , Instanbul, Turkey.

Papaelias, M. P. and Davis, C. L. and Peyton, A. J. and Strangwood, M. and Binns, R. (2000) The use of electromagnetic sensors to monitor temperature during strip steel processing. In: Proceedings of the XVI panhellenic national conference in solid state physics. , Greece.

Papaelias, M. P. and Davis, C. L. and Strangwood, M. and Binns, R. and Peyton, A. J. (2001) Measurement of the ferrite-austenite phase balance during transformation in steel using electromagnetic sensors. In: Proceedings of the XVIIth national panhellenic conference in solid state physics. .

Papaelias, M. P. H. and Davis, C. L. and Strangwood, M. and Binns, R. and Peyton, A. J. (2002) Electromagnetic sensors for monitoring phase transformations in steel – experimental results and modelling simulations. In: Proceedings of the TMS conference: modelling the performance of engineering structural materials III. .

Papaelias, M. P. H. and Davis, C. L. and Strangwood, M. and Binns, R. and Peyton, A. J. (2002) On-line detection of phase transformation and effects of microstructural variability in steel using electromagnetic sensors. In: Proceedings of the metallurgy and materials conference. .

Petrolati, Eleonora and Paoloni, Claudio and Di Carlo, Aldo (2006) Simulation of a THz vacuum triode using carbon-nanotube emitter. In: 2006 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE HELD JOINTLY WITH 2006 IEEE INTERNATIONAL VACUUM ELECTRON SOURCES. IEEE, NEW YORK, pp. 197-198. ISBN 1-4244-0108-9

Peyton, A. J. and Borges, A. R. and Oliveira, E. and Lyon, G. M. and Yu, Z. Z. (1999) Development of electromagnetic tomography (EMT) for industrial applications: part 1: sensor design and instrumentation. In: Proceedings of the world congress on industrial process tomography. , Buxton.

Peyton, A. J. and Mackin, R. O. and Goss, D. and Crescenzo, E. and Tapp, H. S. (2002) The development of high frequency electromagnetic inductance tomography for low conductivity materials. In: Proceedings of the 2nd international symposium on process tomography. .

Peyton, A. J. and Mackin, R. O. and Goss, D. and Wan-Daud, W. A. and Crescenzo, E. and Saunders, N. H. and Tapp, H. S. (2002) Addressing the difficulties in using inductive methods to evaluating human body composition. In: Proceedings of the 9th symposium of the société de biométrie humaine. .

Peyton, A. J. and Tapp, H. S. and Ktistis, C. and Mackin, R. O. and Wan-Daud, W. A. and Goss, D. and Crescenzo, E. (2004) The development of a novel scanner to measure human composition. In: Proceedings of the XII international conference on electrical bio-impedance. .

Peyton, A. J. and Watson, S. and Williams, R. J. and Griffiths, H. and Gough, W. (2003) Characterising the effects of the external electromagnetic shield on a magnetic induction tomography sensor. In: Proceedings of the 3rd world congress on industrial process tomography. , pp. 352-357.

Pham, M .H. and Peyton, A. J. (2004) A 3D BEM modelling of body-scanning MIT system. In: Proceedings of the XII international conference on electrical bio-impedance. .

Pinkerton, A J and Syed, W. U. H. and Li, L. (2006) An analytical model of the combined powder-wire deposition process. In: Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America.

Pinkerton, A. J. (2010) Laser direct metal deposition:theory and applications in manufacturing and maintenance. In: Advances in laser materials processing. Woodhead Publishing Limited, Oxford. ISBN 9781845694746

Pinkerton, A. J. and Ahsan, M. Naveed and Paul, Christ P. and Kukreja, L. M. (2009) Porous surface structures by continuous and pulsed laser metal deposition for biomedical applications. In: Proceedings of the 23rd International Conference on Surface Modification Technologies. Valardocs.

Pinkerton, A. J. and Li, K. (2007) A method and model for pulsed laser cleaning of rapid manufactured parts. In: Proceedings of the 21st International Conference on Surface Modification Technologies. ASM International.

Pinkerton, A. J. and Li, L. (2003) Direct metal deposition by diode laser:modelling the effect of increased beam coupling. In: Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America.

Pinkerton, A. J. and Li, L. (2003) Modelling the temperature effects of melt pool position and wall height in additive manufacturing by direct laser deposition. In: Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping. Escola Superior Tecnologia Gestao Leiria, Leiria, pp. 224-231.

Pinkerton, A. J. and Li, L. (2002) A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders. In: Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America.

Pinkerton, A. J. and Li, L. (2003) The effect of diode laser beam shape and traverse direction on the direct metal deposition process. In: Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America.

Pinkerton, A. J. and Li, L. (2002) A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle. In: Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America.

Pinkerton, A. J. and Syed, W. U. H. and Li, L. (2004) Diode laser deposition of microstructurally graded components using gas- and water-atomised powder blends. In: Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America.

Pinkerton, A.J. and Kamara, A. M. and Shah, K. and Safdar, S. and Li, L. (2008) Three dimensional analytical and finite element methods for simulating a moving melt pool with mass addition. In: Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, pp. 369-374.

Pinkerton, A.J. and Moat, R. and Shah, K. and Li, L. and Preuss, M. and Withers, P. J. (2007) A verified model of laser direct metal deposition using an analytical enthalpy balance method. In: Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America.

Pinkerton, A.J. and Moat, R. J. and Li, L. and Preuss, M. and Withers, P. (2006) Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology. In: Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America.

Pinkerton, A.J. and Paul, C. P. and Iravani-Tabrizipoor, M. and Kukreja, L. M. and Khajepour, A. (2008) Direct laser deposited titanium with controlled porosity for bone tissue engineering. In: Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 421-430.

Pinkerton, A.J. and Shackleton, J. and Moat, R. and Li, L. and Withers, P. and Preuss, M. and Allen, J. and Hilton, P. and Folwell, R. (2005) The effect of process parameters on residual stresses within an inconel 718 part produced by the Direct Laser Deposition process. In: Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 601-610.

Pinkerton, A.J. and Syed, W. U. H. and Karadge, M. and Li, L. (2005) Explaining microstructural and physical variations in rapid additive manufactured waspaloy parts through the laser-deposition thermal cycle. In: Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 822-831.

Porter, I. (1998) Schemebuilder mechatronics. In: Proceedings of the engineering design conference ’98: design reuse. Brunel University, pp. 561-568.

Porter, I. and Bradshaw, A. and Counsell, J. M. and Nagy, Z. (2002) Integration of modelling and conceptual design applied to mechatronics. In: Proceedings of the mechatronics forum international conference (Mechatronics 2002). .

Porter, I. and Counsell, J. M. and Shao, J. (1998) Knowledge representation for mechatronic systems. In: Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design. , pp. 181-196.

Price, R. A. and Kestell, D. J. and Stevens, D. L. and Jaksic, A. and Silvie, J. and Joyce, M. J. (2003) Novel developments in the MOSFET for neutron radiation dosimetry applications. In: Proceedings of the 9th neutron dosimetry symposium. .

Prieto, J. and Richardson, A. M. D. and Rueda, A. and Grout, I. (1998) An approach to realistic fault prediction and layout design for testability in analogue circuits. In: Proceedings of the conference on design, automation and test in Europe. , Paris, pp. 906-912.

Qureshi, J. and Lam, D. and Ye, J. (2009) Behaviour of Headed Shear Stud in a Push Test using Profiled Steel Sheeting. In: Steel Concrete Composite and Hybrid Structures. Research Publishing Services, Singapore, pp. 737-744. ISBN 978-981-08-3068-7

Qureshi, Jawed and Lam, Dennis and Ye, Jianqiao (2011) Finite Element Modelling of Shear Connection Behaviour in a Push Test Using Profiled Steel Sheeting. In: 4th Int. Conf. Struct Eng. Mech. Comput. (SEMC 2010). .

Ramli, S. and Peyton, A. J. (1999) Feasibility study of planar-array electromagnetic inductance tomography (EMT). In: Proceedings of the world congress on industrial process tomography. , Buxton.

Reichenbach, R. and Rosing, R. and Richardson, Andrew M. D. and Dorey, A. P. (2001) Finite element analysis to support component level fault modelling for MEMS. In: Proceedings of SPIE design, test, integration and packaging of MEMS symposium. , pp. 147-158.

Rennie, Allan and Smith, Paul (2009) A review of suitable methods for producing automated or semi automated product designs for production using RM technologies. In: 14th European Forum on Rapid Prototyping and Manufacturing. .

Rennie, Allan E. W. (2006) Lancaster Virtual Prototyping Project:(GONW5167/8EUR – M4-07-LANC). In: Proceedings of the 4th EU Best Practice Conference. .

Riccitelli, R. and Brunetti, F. and Petrolati, E. and Paoloni, C. and Di Carlo, A. and Toschi, F. and Terranova, M. L. and Cirillo, M. (2007) Innovative design of nano-vacuum triode. In: EIGHTH IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. IEEE, ELECTRON DEVICES SOC & RELIABILITY GROUP, NEW YORK, pp. 323-324. ISBN 978-1-4244-0633-3

Riccitelli, Riccardo and Brunetti, Francesca and Paoloni, Claudio and Ulisse, Giacomo and Di Carlo, Aldo and Krozer, Viktor (2008) Field emission vacuum triode: THz waveguide solutions for the transmission lines. In: 2008 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. IEEE, NEW YORK, pp. 379-380. ISBN 978-1-4244-1715-5

Riccitelli, Riccardo and Paoloni, Claudio and Brunetti, Francesca and Ulisse, Giacomo and Di Carlo, Aldo and sessa, v. and Terranova, M. L. and Cirillo, M. and Orlanducci, Silvia (2008) Innovative vacuum device flip-cathode based on carbon nanotubes field emitters. In: First Mediterranean Photonic Conference. , Italy.

Richardson, A. M. D. and Dorey, A. P. (1992) Reliability indicators. In: Third European symposium of reliability of electron devices, failure, physics and analysis (ESREF). Schabisch Gmund, pp. 277-285.

Richardson, A. M. D. and Lechner, A. (2000) Design-for-testability for mixed signal and analogue design. In: Proceedings of 7th international conference on mixed design of integrated circuits and systems. , Poland.

Richardson, A. M. D. and Lechner, A. and Olbrich, T. (1998) Design for testability strategies for mixed signal and analogue designs: from layout to system. In: Proceedings of the 5th IEEE international conference on electronics, circuits and systems. , Lisbon, pp. 425-433.

Rietveld, M. T. and Honary, F. and Robinson, T. R. and Thide, B. and Stubbee, P. (1997) An HF magnetospheric radar for EISCAT. In: Proceedings of the 8th EISCAT international workshop. , Leicester.

Robertson, David and Taylor, C. James and Lokuciewski, Chris (2012) State-dependent system identification for control of a hydraulically-actuated nuclear decommissioning robot. In: 16th IFAC Symposium on System Identification. IFAC, Brussels.

Roger, L. E. and Widden, M. B. and Osborne, M. J. (2000) Foam formation in low expansion fire fighting equipment. In: Proceedings of the Eurofoam 2000 conference. , The Netherlands.

Rosing, R. and Richardson, A. M. D. and Dorey, A. P. (2000) A fault simulation methodology for MEMS. In: Proceedings of the IEE symposium on quality and automation (RESQUA 2000). , Penang, Malaysia.

Rosing, R. and Richardson, A. M. D. and Kerkhoff, A. and Acosta, A. (1998) Clock switching:a new design for current test (DcT) method for dynamic logic circuits. In: IDDQ Testing, 1998. Proceedings. 1998 IEEE International Workshop on. IEEE, pp. 20-25. ISBN 0818691913

Rosing, R. and Richardson, Andrew M. D. (2003) Modelling techniques for reliability prediction in MEMS technologies. In: Proceedings of the Nanotech 2003 conference. .

Safdar, S. and Pinkerton, A.J. and Moat, R. and Li, L. and Sheikh, M. A. and Preuss, M. and Withers, P. J. (2007) An anisotropic enhanced thermal conductivity approach for modelling laser melt pools. In: Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America.

Salisbury, A. and Peyton, A. J. and Dytch, A. (2003) Optimising the spatial sensitivity response of a new current sensor constructed with a printed coil array. In: Proceedings of the 3rd world congress on industrial process tomography. , pp. 370-376.

Salisbury, A. and Peyton, A. J. and Dytch, A. (2002) A novel cost effective contactless inductive current sensor. In: Proceedings of the EPSRC PREP 2002 conference. .

Salisbury, A. and Peyton, A. J. and Dytch, A. (2003) A printed circuit board gradiometer current transformer. In: Proceedings of the 20th IEEE instrumentation and measurement technology conference, IMTC2003. IEEE, pp. 20-25. ISBN 0-7803-7705-2

Scott, J. N. and Bradley, D. A. and Adelson, R. M. and Pengelly, M. and Seward, D. W. (1994) IT in support of construction site automation and robotics. In: Proceedings of the 11th international symposium on automation and robotics in construction XI (ISARC). Elsevier, Amsterdam, pp. 531-538. ISBN 0444820442

Seward, D. W. (1992) Designing a robot excavator - the decision making process. In: Mechatronics case studies. Mechatronics case studies.

Seward, D. W. (1992) Robot excavator. In: IEE computing and control colloquium on telerobotically controlled mobil vehicles. , London, 5/1-5/3.

Seward, D. W. and Bradley, D. A. and Mann, J. E. and Goodwin, M. R. (1992) Controlling an intelligent excavator for autonomous digging in difficult ground. In: 9th international symposium on automation and robotics in construction. , Tokyo.

Seward, D. W. and Margrave, F. W. and Sommerville, I. and Kotonyam, G. (1995) Safe systems for mobile robots: the safe-SAM project. In: Proceedings of the 3rd safety-critical systems symposium published as directions in safety-critical systems. Springer-Verlag, Brighton, pp. 153-170.

Seward, D. W. and Margrave, F. W. and Sommerville, I. and Morrey, R. (1996) LUCIE the robot excavator - design for system safety. In: Proceedings of the 1996 IEEE international conference on robotics and automation. IEEE, Minneapolis, pp. 936-968. ISBN 0-7803-2988-0

Seward, D. W. and Quayle, S. (1996) System architectures and safety for mobile construction robots. In: Proceedings of the 13th international symposium on robotics in construction. Japan Robot Association (JARA), Tokyo, Japan, pp. 727-732.

Seward, D. W. and Ward, J. and Findlay, J. and Kinniburgh, H. (1996) Precise on-site positioning of a piling rig. In: Proceedings of the Trimble 1996 surveying and mapping conference. , California, pp. 183-189.

Seward, D. W. and Ward, J. and Findlay, J. and Kinniburgh, H. (1996) The automation of piling rig positioning using satellite GPS. In: Proceedings of the 13th international symposium on robotics in construction. Japan Robot Association (JARA), Tokyo, Japan, pp. 223-230.

Seward, Derek and Agate, R. Y. and Bakari, Mohamed and Pace, C. M. (2006) Control architecture characteristics for intelligence in autonomous mobile construction robots. In: Proceedings of the 24th international symposium on automation and robotics in construction. , pp. 846-851.

Seward, Derek and Agate, R. Y. and Pace, C. M. (2006) Emotions modelling for safe behaviour generation in robotic systems. In: Proceeding of the European safety and reliability conference (ESREL 2006). , pp. 93-99.

Seward, Derek W. and Bakari, M. J. (2005) The use of robotics and automation in nuclear decommissioning. In: Proceedings of the 22nd international symposium on automation and robotics in construction. .

Seward, Derek W. and Joyce, Malcolm J. (2001) Teaching safety – issues of course design and delivery. In: Proceedings of a safety critical systems symposia. .

Seward, Derek W. and Pace, C. M. and Agate, Rahee Y. (2006) Implementation issues for safe behaviour in robotic systems. In: Proceeding of the European safety and reliability conference (ESREL 2006). .

Seward, Derek W. and Quayle, Stephen D. (2004) Formula student – the problem of learning and assessment. In: Proceedings of the international conference on innovation, good practice and research in engineering education. , pp. 99-104.

Seward, Derek W. and Quayle, Stephen D. and Kied, K. and Pace, C. (2002) Data interpretation from Leuze RotoScan sensor for robot localisation and environment mapping. In: Proceedings of the 19th international symposium on automation and robotics in construction. .

Seward, Derek W. and Zied, K. (2003) Towards a comprehensive feasibility analysis for the use of robots in the construction industry. In: Proceedings of the 20th international symposium on automation and robotics in construction. , pp. 399-405.

Seward, Derek W. and Zied, K. and Riehl, J. (2001) The use of simulation in the economic analysis of robotised construction tasks. In: Proceedings of the 18th international symposium on robotics in construction. , pp. 265-270.

Shaban, E. M. and Taylor, C. James (2005) Proportional-integral-plus control of a class of nonlinear systems using exact and partial linearisation by feedback. In: Proceedings of the international conference on automatic control and system engineering (ACSE-05). .

Shaban, E. M. and Taylor, C. James and Chotai, A. (2004) State dependent parameter proportional-integral-plus (SDP-PIP) control of a nonlinear robot digger arm. In: Proceedings of the UKACC international conference on control. .

Shaban, E. M. and Zied, K. and Taylor, C. James and Seward, Derek W. (2005) Nonlinear control system design for construction robots: estimation, partial linearization by feedback and state-dependent-parameter control. In: Proceedings of the 22nd international symposium on automation and robotics in construction (ISARC-05). .

Shah, K. and Pinkerton, A. J. and Moat, R. and Li, L. and Preuss, M. (2008) Direct diode laser deposition of functionally graded Ti-6AL-4V and inconel 718 components. In: Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, pp. 273-278.

Shah, K. and Salman, A. and Pinkerton, A. J. and Li, L. (2009) The significance of melt pool variables in laser direct deposition of functionally graded aerospace alloys. In: Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 569-576.

Shanjani, Y. and Pinkerton, A.J. and Toyserkani, E. (2010) Selective laser sintering of calcium polyphosphate - Polyvinyl alcohol for biomedical applications. In: Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 489-494.

Sharif, E. and Dorey, A. P. and Richardson, A. M. D. (1998) An integrated diagnostic reconfiguration (IDR) technique for fault tolerant mixed signal microsystems. In: Proceedings of the IEEE international circuits and systems symposium. IEEE.

Sharpe, John and Bracewell, R. H. (1993) Application of bond graph methodology to concurrent conceptual design of interdisciplinary systems. In: Proceedings of IEEE/SSMC conference: 1993, International Conference on Systems, Man and Cybernetics, Le Touquet - France. IEEE, Piscataway, NJ, pp. 7-13. ISBN 0780309111

Sharpe, John and Goodwin, E. M. (1993) Application of bond graphs in complex concurrent multi-disciplinary engineering design. In: Proceedings of the 1993 international conference on bond graph modelling and simulation. US Society for Computer Simulation, San Diego, pp. 7-13.

Sharpe, John and Milnes, A. J. (1993) Quality control of dielectric loss in oil-filled EHV power cables. In: Proceedings of the third international conference on power cables. IEE, London.

Shen, PS and Ye, Jianqiao and Cai, SB (1999) Non-linear FEM for RC shear wall structures. In: Developments in Analysis & Design Using FEM: 7th Int. Conf. Civil. Struct. Eng., Oxford. Civil-Comp press, Stirling, pp. 181-186.

Shippen, B. A. and Joyce, Malcolm J. (2009) The Radioactivity Depth Analysis Tool (RADPAT). In: ASME 2009 12th International Conference on Environmental Remediation and Radioactive Waste Management (ICEM2009). American Society of Mechanical Engineers, 2 . American Society of Mechanical Engineers, pp. 149-155. ISBN 9780791844076 0791844072 9780791844083 0791844080

Simm, W. and Roberts, P. E. and Joyce, Malcolm J. (2005) Signal processing for the use in the assessment of dysarthric speech. In: Proceedings of the 3rd IEE international seminar on medical applications of signal processing. , pp. 147-152. ISBN 0-86341-570-9

Simm, W. and Roberts, P. E. and Philpott, C. and Joyce, Malcolm J. (2005) The quantitative assessment of dysarthric speech for use in evidence-based therapy. In: Proceedings of the 3rd conference on universal access in human-computer interaction. .

Simm, William and Roberts, Peter E. and Joyce, Malcolm J. (2006) Dysarthic speech measures for use in evidence-based speech therapy. In: Proceedings of the 3rd Cambridge workshop on universal access and assistive technology. Springer, London, pp. 155-164.

Sivasundarasan, P. and Bradley, D. A. (1994) An intelligent soft-start system for large induction machines. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton, pp. 373-379.

Smith, Paul and Rennie, Allan (2011) Automated variation in product design: Using visual basics.net programming language to generate product variation. In: Proceedings of the RAPDASA 2011 Conference. .

Smith, Paul and Rennie, Allan (2009) A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM). In: 4th International Conference on Advanced Research in Virtual and Rapid Prototyping. Taylor & Francis Group, Leiria, Portugal, pp. 95-100. ISBN 978-0-415-87307-9

Smith, Paul and Rennie, Allan (2010) Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials. In: 11th National Conference on Rapid Design, Prototyping and Manufacturing. CRDM Ltd, High Wycombe, pp. 55-61. ISBN 978-0-9566643-0-3

Soldatos, K P and Ye, Jianqiao (1995) On three-dimensional buckling analysis of orthotropic cylinders. In: Proceedings 15th Canadian Congress of Applied Mechanics CANCAM 95. .

Sommerville, I. and Seward, D. W. and Morey, R. and Quayle, S. (1997) Safe systems architectures for autonomous robots. In: Proceedings of the safety critical systems conference. , Brighton.

Srivastava, V. and Joshi, S. N. and Perring, D. and Carter, R. G. (1993) An improved 2.5 dimensional large-signal model for helix TWTs. In: Proceedings of the fourth international symposium on recent advances in microwave technology. , New Delhi.

Stamp, D. W. and Lyons, A. R. A. and Peyton, A. J. and Drake, P. (2001) Visualisation of the steel flow pattern in the Tundish pouring nozzle. In: Proceedings of the 2nd international conference on science and technology of steelmaking. .

Stephen, David and Ye, Jianqiao and Lam, Dennis (2011) Realistic Modeling of High Rise Structures subjected to Progressive Collapse. In: The Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Crete, Greece. .

Street, M. and Hunt, B. and Darnell, M. and Honary, B. and Maundrell, M. (1993) Automatic link establishment: current status and future improvements. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 129-131.

Syed, W. U. H. and Pinkerton, A. J. and Li, L. (2004) Combined wire and powder feeding laser direct metal deposition for rapid prototyping. In: Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America.

Syed, W. U. H. and Pinkerton, A. J. and Li, L. and Al-Eid, E. and Pan, J. (2005) Statistical analysis of the effect of processing conditions on powder catchment efficiency in the Direct Laser Deposition (DLD) process. In: Virtual modeling and rapid manufacturing. Taylor and Francis, London, pp. 361-367. ISBN 9780415390620

Syed, W. U. H. and Pinkerton, A. J. and Liu, Z. and Li, L. (2005) Single-step graded surface coating using combined wire and powder feeding laser cladding. In: Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 787-795.

Taleb-Bendiab, A. and Oh, K. S. V. and Sommerville, I. and French, M. J. (1992) Collaborative design: knowledge-based systems for concurrent engineering. In: ECAI'92. , Vienna.

Tannock, J. D. T. and Burge, S. E. (1992) Quality assurance in higher education. In: Engineering Professors' Conference Occasional Paper No 4. .

Tannock, J. D. T. and Burge, S. E. (1993) A model for quality assurance in higher education. In: Proceedings of SEFI annual conference on achieving and assessing quality of engineering education. , pp. 181-193.

Tapp, H. S. and Goss, D. and Mackin, R. O. and Crescenzo, E. and Wan-Daud, W. A. and Ktistis, C. and Peyton, A. J. (2003) A combined digital camera – EMT system to measure human body composition. In: Proceedings of the 3rd world congress on industrial process tomography. , pp. 384-390.

Tapp, H. S. and Peyton, A. J. (2003) A state of the art review of electromagnetic tomography. In: Proceedings of the 3rd world congress on industrial process tomography. , pp. 340-346.

Taylor, C. J. and Chotai, A. and Young, P. C. (2000) Non-minimal state space design: a unified approach to state variable feedback. In: Proceedings of the 15th international conference on systems engineering. Coventry University.

Taylor, C. J. and Price, L. and Leigh, P. and Young, P. C. and Berckmans, D. (2000) Proportional-integral-plus (PIP) control of agricultural buildings. In: Proceedings of Agricontrol 2000: international conference on modelling and control in agriculture, horticulture and post-harvest processing. , The Netherlands.

Taylor, C. James and Bradshaw, A. and Chaplin, R. V. and French, M. and Widden, Martin B. (2002) Wave energy research at Lancaster University: PS frog and frond. In: Proceedings of the world renewable energy congress VII held in Cologne, Germany. .

Taylor, C. James and Chotai, Arun (2008) Non-minimal state dependent Riccati equation and pole assignment control of nonlinear systems. In: Proceedings of the 19th International Conference on Systems Engineering. .

Taylor, C. James and Chotai, Arun (2010) Nonlinear control by input-output pole assignment: state space derivation. In: UKACC International Conference Control 2010. , pp. 1076-1081. ISBN 978-184600-0386

Taylor, C. James and Chotai, Arun (2009) State dependent ramp metering control of motorway bottlenecks using non-linear pole assignment. In: 12th IFAC Symposium on Control in Transportation Systems. .

Taylor, C. James and Chotai, Arun and Young, Peter C. (1998) Continuous time Proportional-Integral-Plus (PIP) control with filtering polynomials. In: Proceedings of the UKACC International Conference on Control. Institution of Electrical Engineers Conference Publication No. 455, pp. 1391-1396.

Taylor, C. James and Exadaktylos, V. and Chotai, Arun (2006) Non-minimal model predive control with an integral-of-error state variable. In: Proceedings of the UKACC international conference on control. .

Taylor, C. James and McKenna, Paul G. and Young, Peter C. and Chotai, Arun and Scariza, J. (2003) Traffic flow modelling and linked ramp metering control for the M3/M27 pilot scheme. In: Proceedings of the 16th international conference on systems engineering, ICSE 2003. , pp. 687-692.

Taylor, C. James and Shaban, E. M. and Chotai, Arun and Ako, S. (2006) Development of an automated verticality alignment system for a vibro-lance. In: Proceedings of the 7th Portuguese conference on automatic control (Controlo-07). .

Taylor, C. James and Sidiropoulou, Eleni and Shaban, E. M. and Tych, Wlodek and Chotai, Arun (2006) Linear, nonlinear and classical control of a 1/5th scale automated excavator. In: Proceedings of the 18th international conference on systems engineering (ICSE-06). .

Taylor, C. James and Stables, M. A. and Chotai, Arun (2006) Control of micro-climate using time delay state dependent parameter models. In: Proceedings of the 18th international conference on systems engineering (ICSE-06). .

Taylor, C. James and Stables, M. A. and Cross, Philip and Gunn, K. and Aggidis, George A. (2009) Linear and nonlinear control of a power take-off simulation for wave energy conversion. In: 8th European Wave and Tidal Energy Conference. .

Taylor, C. James and Stables, M. A. and Young, Peter C. (2004) Identification of a multivariable state dependency for airflow rate in a forced ventilation test chamber. In: Proceedings of the UKACC International Conference on Control. .

Taylor, C. James and Young, Peter and Cross, Philip (2012) Practical experience with unified discrete and continuous–time, multi–input identification for control system design. In: 16th IFAC Symposium on System Identification. IFAC, Brussels.

Taylor, C. James and Young, Peter C. (2010) Captain toolbox analysis of the hyperfast switching peltier cooling system benchmark. In: UKACC International Conference Control 2010. , pp. 1082-1087. ISBN 978-184600-0386

Taylor, Stuart and Rennie, Allan and McDonald, Walter (2007) Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach. In: Virtual and Rapid Manufacturing. Taylor & Francis Group, London, pp. 811-816. ISBN 978-0-415-41602-3

Thomas, Stuart and Adamopoulos, George and Bashir, Anneqa and Bradley, Donal and Anthopoulos, Thomas (2011) Crystallographic engineering of oxide semiconductors for transistors and microelectronics applications. In: Materials Research Society. .

Turvey, G. J. (1999) Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections. In: Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999. RAPRA, pp. 1-8. ISBN 978-1-85957-199-6

Turvey, G. J. (1998) Frame connections. In: COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. European Commission, Brussels/Luxembourg, pp. 27-49.

Turvey, G. J. (2000) Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats. In: Proceedings in the ECCM9 (composites – from fundamentals to exploitation). , Brighton.

Turvey, G. J. (1998) Plate-to-plate mechanical: part II: testing and applications. In: COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. European Commission, Brussels/Luxembourg, pp. 15-26.

Turvey, G. J. (1998) Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles. In: Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14.

Turvey, G. J. (1999) Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1. In: Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections. , Liege, pp. 547-556.

Turvey, G. J. (1992) Tension/compression strength of unnotched/notched pultruded GRP plate. In: Proceedings of the ECCM-composites testing and standardisation conference. .

Turvey, G. J. (1996) Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project. In: Structural design of polymer composites: EUROCOMP design code and handbook. E. and FN Spon, London, pp. 719-741. ISBN 0419194509.

Turvey, G. J. and Brooks, R. J. (1996) Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions. In: Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona, pp. 651-664.

Turvey, G. J. and Cooper, C. (1996) Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections. In: Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Canadian Society for Civil Engineering, Montreal, pp. 927-934.

Turvey, G. J. and Cooper, C. (1998) Semi-rigid connection in pultruded GRP frame structures. In: Mechanics of composite materials and structures. , pp. 151-166.

Turvey, G. J. and Cooper, C. (1998) Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction. In: Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98). University of Arizona, pp. 221-235.

Turvey, G. J. and Cooper, C. (1995) Single bolt tension joint tests on pultruded GRP WF-section web and flange material. In: Proceedings of the 10th international conference on composite materials (ICCM-10). Woodhead Publishing Ltd., Vancouver, pp. 621-628.

Turvey, G. J. and Drinali, H. (1996) Full-range response of circular steel plates subjected to combined transverse pressure and edge compression. In: Advances in computational techniques for structural engineering. Civil-Comp press, Edinburgh. ISBN 0948749458

Turvey, G. J. and Salehi, M. (1997) Full-section yield analysis of uniformly loaded sector plates. In: Trends in structural mechanics: theory, practice and education. Solid mechanics and its applications (v. 54). Kluwer Academic, Dordrecht; London, pp. 289-298. ISBN 0792346033

Turvey, G. J. and Salehi, M. (1995) Large deflection analysis of eccentrically stiffened sector plates. In: Proceedings of a conference on developments in computational techniques for civil engineering (CIVIL-COMP 95). Civil-Comp press, Edinburgh, pp. 243-253.

Turvey, G. J. and Slater, R. C. (1992) Tests on pultruded GRP posts for handrail/barrier structures. In: First international conference on advanced composite materials in bridges and structures. , Canada.

Turvey, Geoffrey J. (2001) "Pultruded GRP frames: simple (conservative) approach to design, a rational alternative and research needs for improved design". In: Proceedings of the ASCE sponsored workshop on composites in construction: a reality. .

Turvey, Geoffrey J. (2004) An experimental evaluation of the stiffening effect of CFRP flange reinforcement and practical end connections on the flexural response of pultruded GRP WF-beams. In: Proceedings of the IMTCR-04 conference on innovative materials and technologies for construction and restoration: volume 1: keynotes, materials, construction. , pp. 578-588.

Turvey, Geoffrey J. and Mulcahy, N. (2004) Vibration frequencies and mode shapes of pultruded GRP circular plates with central circular cut-outs. In: Proceedings of the 4th international conference on thin-walled structures: thin-walled structures: advances in research, design and manufacturing technology. , pp. 927-934.

Turvey, Geoffrey J. and Salehi, M. (2003) Annular sector plates: comparison of full-section and layer yield predictions. In: Proceedings of the 9th international conference on civil and structural engineering computing. , pp. 89-90.

Turvey, Geoffrey J. and Salehi, M. (2001) Elasto-plastic large deflection of uniformly loaded sector plates. In: Proceedings of the 3rd international conference on thin-walled structures. , pp. 631-640.

Turvey, Geoffrey J. and Wang, P. (2004) Recent research advances at Lancaster University on double-lap bolted tension joints in pultruded GRP plate material. In: Proceedings of the 7th world pultrusion conference. , pp. 1-16.

Turvey, Geoffrey J. and Wang, P. (2001) Single bolt tension joints in pultruded GRP material – effect of elevated temperature on failure loads and strengths and joint efficiency. In: Proceedings of the BSSM conference on strain measurement in the 21st century. , pp. 20-23.

Turvey, Geoffrey J. and Zhang, Y. (2004) Finite element analysis of buckling and initial failure loads of short pultruded GRP columns. In: Proceedings of the 7th international conference on computational structures technology. , pp. 57-58.

Turvey, Geoffrey J. and Zhang, Y. (2004) Local buckling of axially compressed, pultruded GRP WF-section short columns – comparison of experimental response with FE analysis predictions. In: Proceedings of the BSSM (British society for strain measurement) international conference on advances in experimental mechanics: advances in experimental mechanics. , pp. 87-92.

Turvey, Geoffrey J. and Zhang, Y. (2004) Shear failure strength of web-flange junctions in pultruded GRP profiles. In: Proceedings of the ASIC 2004 conference: advanced polymer composites (ASIC 2004). , pp. 553-560.

Turvey, Geoffrey J. and Zhang, Y. (2003) Tearing failure of web-flange junctions in pultruded GRP profiles. In: Proceedings of the DFC-7 conference on deformation and fracture of composites. .

Turvey, Geoffrey J. and Zhang, Y. (2004) Torsion of a pultruded GRP WF beam with practical end connections: experimental results and FE analysis. In: Advanced composite Materials in bridges and structures. , p. 99.

Turvey, Geoffrey J. and Zhang, Y. (2004) Web-flange junctions of pultruded GRP WF profiles: notched flange shear strengths. In: Proceedings of a conference: FRP composites in civil engineering (CICE 2004). , pp. 859-864.

Vogel, M and Khan, M. and Ibarra-Medina, J. and Pinkerton, A. J. and N'Dri, N. and Megahed, M. (2012) A verified model of transient and residual stresses in laser direct metal deposition. In: Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, Paper 304.

Vogel, M. and Ibarra-Medina, J. and N'Dri, N. and Pinkerton, A. J. (2011) An integrated model of laser clad formation using CFD and FE methods. In: Surface modification technologies XXV. Valardocs, India. ISBN 978-81-910571-4-0

Wan-Daud, W. A. and Peyton, A. J. and Tapp, H. S. and Crescenzo, E. (2002) Investigation of an integrated body scanning system using multiple cameras and structured light for determination of human body shape and volume. In: Proceedings of the 9th symposium of the société de biométrie humaine. .

Wan-Daud, W. A. and Peyton, A. J. and Tapp, H. S. and Crescenzo, E. (2003) Towards an integrated system using multiple cameras and structured lighting for the measurement of human body shape and volume. In: Proceedings of the international conference on robotics, vision, information and signal processing (ROVISP 2003). .

Wan-Daud, W. A. and Tapp, H. S. and Ktistis, C. and Peyton, A. J. (2003) A 3D imaging system for measuring the shape and volume of the human body. In: Proceedings of the 3rd world congress on industrial process tomography. , pp. 358-363.

Wang, C. and Richardson, Andrew M. D. and Liu, D. and Rosing, R. and Tucker, R. and De Masi, B. (2003) Construction of nonlinear dynamic MEMS component models using cosserat theory. In: Proceedings of the SPIE design, test, integration and packaging of MEMS symposium. Cannes Mandelieu, France.

Wang, P. and Carter, R. G. and Basu, B. N. (1994) An improved technique for measuring the Pierce impedance of helix slow-wave structures. In: Proceedings of the 24th European microwave conference. Nexus, Cannes.

Wang, W. and Pinkerton, A. J. and Wee, L. M. and Li, L. (2007) Component repair using laser direct metal deposition. In: Proceedings of the 35th International MATADOR Conference. Springer Verlag, London, pp. 345-350. ISBN 978-1-84628-987-3

Wang, W. and Pinkerton, A.J. and Li, L. (2008) A gas-free powder delivery system for 100% deposition efficiency in Direct Laser Deposition. In: Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 415-423.

Weaver, J. A. and Joyce, M. J. and Peyton, A. J. and Roskell, J. (2000) Reliability and usability improvements to a transportable neutron spectrometer (TNS). In: Proceedings of the regional symposium on quality and automation (RESQUA 2000). , pp. 292-301.

Weaver, J. A. and Joyce, M. J. and Peyton, A. J. and Silvie, J. (2000) Recent improvements to a transportable neutron spectrometer (TNS). In: Proceedings of the international workshop on neutron field spectrometry in science, technology and radiation protection. , Pisa.

Weaver, J. A. and Joyce, Malcolm J. and Peyton, A. J. and Roskell, J. (2002) Recent improvements to a transportable neutron spectrometer (TNS). In: Proceedings of a conference on nuclear instruments and methods in physics research. .

Weaver, J. A. and Peyton, A. J. and Joyce, M. J. and Silvie, J. (2000) The introduction of digital processing techniques to a neutron sensing system. In: Proceedings of the 2nd conference on postgraduate research in electronics and photonics. , pp. 30-35.

Weerasekera, Roshan and Grange, M. and Pamunuwa, Dinesh Bandara and Tenhunen, Hannu and Zheng, Li-Rong (2009) Compact modelling of through-silicon vias (TSVs) in three-dimensional (3-D) integrated circuits. In: Proceedings of the IEEE International Conference on 3D System Integration (3D IC), 2009. IEEE, San Francisco. ISBN 978-1-4244-4511-0

Weerasekera, Roshan and Pamunuwa, Dinesh B. and Zheng, L. R. and Tenhunen, H. (2004) Crosstalk immune interconnect driver design. In: Proceedings of the international symposium on system-on-chip conference. , pp. 139-142.

Weerasekera, Roshan and Pamunuwa, Dinesh B. and Zheng, Li-Rong and Tenhunen, Hannu (2007) Delay-balanced smart repeaters for on-chip global signaling. In: Proc. International Conference on VLSI Design. IEEE, Bangalore, pp. 308-313. ISBN 0-7695-2762-0

Weerasekera, Roshan and Pamunuwa, Dinesh B. and Zheng, Li-Rong and Tenhunen, Hannu (2006) Minimal-power, delay-balanced smart repeaters for interconnects in the nanometer regime. In: Proc. International Workshop on System-level Interconnect Prediction (SLIP). ACM, Munich, pp. 113-120. ISBN 1-59593-255-0

Weerasekera, Roshan and Zheng, Li-Rong and Pamunuwa, Dinesh B. and Tenhunen, Hannu (2007) Early selection of system implementation choice among SoC, SoP and 3-D integration. In: Proc. International System-On-Chip Conference (SOCC). IEEE, Hsin Chu, Taiwan. ISBN 978-1-4244-1592-2

Weerasekera, Roshan and Zheng, Li-Rong and Pamunuwa, Dinesh B. and Tenhunen, Hannu (2007) Extending systems-on-chip to the third dimension : performance, cost and technological tradeoffs. In: Proc. IEEE/ACM International Conference on Computer-Aided Design (ICCAD). IEEE, San Jose, California, pp. 212-219. ISBN 978-1-4244-1382-9

Weerasekera, Roshan and Zheng, Li-Rong and Pamunuwa, Dinesh Bandara and Tenhunen, Hannu (2005) Switching sensitive driver circuit to combat dynamic delay in on-chip buses. In: Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation. Lecture Notes in Computer Science . Springer, Berlin, pp. 277-285. ISBN 9783540290131

Weldezion, A. and Weerasekera, Roshan and Pamunuwa, Danesh B. and Zheng, Li-Rong and Tenhunen, Hannu (2009) Bandwidth optimization for through silicon via (TSV) bundles in 3D integrated circuits. In: Workshop Notes, Design, Automation and Test in Europe (DATE). , Nice.

Weldezion, A. Y. and Grange, M. and Pamunuwa, Dinesh Bandara and Lu, Zhonghai and Jantsch, A. and Weerasekera, Roshan and Tenhunen, Hannu (2009) Scalability of Network-on-Chip communication architecture for 3-D meshes. In: Proc. ACM/IEEE International Symposium on Networks on Chip (NOCS). IEEE, San Diego, pp. 114-123. ISBN 978-1-4244-4142-6

Widden, M. B. (1995) Fluid mechanics. In: Foundations of engineering. Macmillan.

Widden, M. B. and French, M. J. (2000) Economical conversion of low-head hydropower. In: Proceedings of the world renewable energy congress VI. , Brighton, pp. 1611-1614.

Widden, Martin and Rennie, Allan and Quayle, Stephen and Gunn, K. (2011) A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture. In: Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011. Technical University of Denmark, pp. 1039-1048. ISBN 978‐87‐985272‐6‐8

Widden, Martin B. and French, M. J. and Aggidis, George A. (2005) The power capture of PS frog pitching and surging point absorber wave energy converter. In: Proceedings of the international symposium on fluid machinery for wave and tidal energy: state of the art and new developments. .

Winsby, A. J. and Burge, S. and Grout, I. and Widden, Martin B. (2003) An intuitive visual aid to the design and analysis of controller transformations. In: Proceedings of the educational ECAD user group. .

Winsby, A. J. and Quayle, Stephen D. and Seward, Derek W. (2003) Towards the realisation of a multi-perspective virtual design environment: the integration of design tools, methods and virtual reality. In: Proceedings of the 4th national conference on rapid and virtual prototyping and applications. .

Yan, X. T. and Chaplin, R. V. and Sharpe, J. E. E. (1994) A parametric approach to mechatronic product design. In: Proceedings of the 1994 engineerings systems design and analysis conference, ESDA'94. American Society of Mechanical Engineers.

Yang, Dongmin and Sheng, Yong and Ye, Jianqiao and Tan, Yuanqiang (2011) Multi-scale modelling of damage progression in FRC laminates - Applications of DEM. In: Particle-Based Methods II. International Center for Numerical Methods in Engineering (CIMNE), Barcelona, pp. 256-263. ISBN 9788489925670

Yang, Dongmin and Ye, Jianqiao and Tan, Y. Q. and Sheng, Y. (2010) Discrete Element Method Simulation of the Damage Evolution in Cross-Ply Laminate under Tensile Loading. In: The Tenth International Conference on Computational Structures Technology. Civil-Comp press, Stirling. ISBN 978-1905088386

Yang, Jian and Ye, Jianqiao (2005) Closed-form rigorous solution for the interfacial stress in plated beams using a two-stage method. In: Bond behaviour of FRP in structures :. International Institute for FRP in Construction. ISBN 9623675062

Yavuz, H. and Bradshaw, A. (1999) Conceptual design and modelling of a domestic mobile robot. In: Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). , Windermere, pp. 15-35.

Yavuz, H. and Bradshaw, A. and Dogantan, Z. S. (1997) Navigation system design for an individual excavator robot. In: Proceedings of Mamkon '97. , Istanbul, pp. 489-495.

Yavuz, H. and Chandler, A. and Bradshaw, A. and Seward, D. W. (1999) Conceptual design and development of a navigation system for a mobile robot. In: Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). , Windermere, pp. 65-85.

Ye, J Q and Yang, J (2005) An investigation on the stress transfer in concrete beams bonded with FRP plates. In: Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005. IIFC SECRETARIAT, HONG KONG, pp. 183-188. ISBN 9623675062

Ye, Jianqiao (1998) Decay rate of boundary effects in laminated composite cylinders and cylindrical panels. In: Proceedings of the 1998 ASME Engineering Systems Design and Analysis (ESDA) Conference. .

Ye, Jianqiao (2009) Three-dimensional Modeling of Stress Transfer, Stiffness Degradation, failure and Transverse Cracking in Composite Laminates. In: Advances in Engineering Mechanics. Nova Science Publishers, pp. 127-165. ISBN 978-1-60876-901-8

Ye, Jianqiao and Soldatos, K P (1996) Axisymmetric vibration analysis of laminated hollow spheres composed of transversely isotropic layers. In: Proceedings of the 1996 Engineering Systems Design and Analysis Conference. American Society of Mechanical Engineers. ISBN 0791814963

Ye, Jianqiao and Yang, Jian (2004) Stress transfer in cross-ply laminates with transverse cracks. In: Computational Mechanics: Proceedings of the Sixth World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics, September 5-10, 2004, Beijing, China. Tsinghua University Press & Springer-Verlag, Beijing. ISBN 7302093431

Ye, Jianqiao and Zhang, Daxu (2008) Initiation and propagation of transverse cracking in composite laminates. In: Third International Conference on Engineering Failure Analysis, ICEFA-III, Barcelona. Elsevier.

Yin, W. and Binns, R. and Davis, C. and Peyton, A. J. (2005) Analysis of the lift-off effect of spectra for eddy current sensors. In: Proceedings of the IMTC 2005 – instrumentation and measurement technology conference. , pp. 1779-1784.

Yin, W. and Dickinson, S. J. and Peyton, A. J. (2005) Imaging the permeability distribution of a layered conductor using inductance spectroscopy. In: Proceedings of the 4th world congress on industrial process tomography. , pp. 720-725.

Yin, W. and Dickinson, S. J. and Peyton, A. J. (2005) A multi-frequency impedance analyser for electrical tomography systems. In: Proceedings of the 4th world congress on industrial process tomography. , pp. 30-35.

Yin, W. and Dickinson, S. J. and Peyton, A. J. (2003) The use of inductance spectroscopy to image the conductivity distribution of a layered conductor. In: Proceedings of the 3rd world congress on industrial process tomography. , pp. 472-478.

Yin, W. and Peyton, A. J. and Dickinson, S. J. (2003) Simultaneous measurement of distance and thickness of a thin metal plate with an electromagnetic sensor using a simplified model. In: Proceedings of the 20th IEEE instrumentation and measurement technology conference. IEEE, pp. 162-165. ISBN 0780377052

Young, Peter and Taylor, C. James (2012) Recent developments in the CAPTAIN Toolbox for Matlab. In: 16th IFAC Symposium on System Identification. IFAC, Brussels.

Yung, H. M. and Darnell, M. and Charbit, G. G. and Honary, B. and Harris, R. M. (1994) Time-scaled implementation of FHSS communication system using multiple DSPs. In: DSP for communication systems I. , pp. 25-42.

Zhang, L. Bradley and Seward, D. W. (1993) Safety critical systems for robot excavation. In: Automation and robotics in construction X : proceedings of the 10th International Symposium on Automation and Robotics in Construction (ISARC) Houston, Texas, U.S.A., 24-26 May, 1993. Elsevier, Amsterdam ; London, pp. 109-116. ISBN 0444815236.

Zhao, L. and Carter, R. G. (1992) The solution of waveguide eigenvalues with arbitrary shapes by FD-FD algorithm in curvilinear coordinates. In: 22nd European microwave conference : conference proceedings, Monday 24th to Thursday 27th August 1992, Helsinki University of Technology, Espoo, Finland. Microwave Exhibitions and Publishers, Tunbridge Wells. ISBN 0946821771

Zheng, Li-Rong and Pamunuwa, Dinesh B. and Tenhunen, Hannu (2000) Accurate a priori signal integrity estimation using a multilevel dynamic interconnect model for deep submicron VLSI design. In: Proceedings of the 26th European Solid-State Circuits Conference, 2000. ESSCIRC '00. IEEE, pp. 352-355.

Zyablov, V. and Potapov, V. and Sidorenko, V. and Markarian, G. S. and Honary, B. (1993) Recursive decoding algorithms for hamming codes. In: 2nd International Symposium Communication Theory & Applications. , Ambleside, UK, pp. 18-21.

da Silva, J. C. and Bennett, D. and Counsell, J. M. (1997) Computational agent to integrate expert system and simulation language. In: Proceedings of the 9th European simulation symposium. , Germany.

da Silva, J. C. and Cheung, H. F. (1997) Computer support environment applying object-oriented methods for hydraulic systems design. In: Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Lancaster University: Lancaster Engineering Design Centre, Lancaster, pp. 117-131. ISBN 1862200262.

da Silva, J. C. and Dawson, D. (1997) Computational agent to integrate an expert system for design and the Internet. In: Proceedings of the WebNet '97 world conference of the world wide web, Internet and Intranet. , Toronto, pp. 957-958.

da Silva, J. C. and Dawson, D. (1998) Expert system for design validation and expandability issues. In: Proceedings of the computer aided conceptual design conference ’98. , Windermere, pp. 25-48.

da Silva, J. C. and Dawson, D. (1997) The development of an expert system for hydraulic systems design focusing on concurrent engineering aspects. In: ICED 97 : proceedings of the 11th international conference on engineering design in Tampere. Tampere University of Technology, Tampere, pp. 271-276. ISBN 9517227884.

Monograph

Burge, S. E. and Tannock, J. D. T. and Jackson, N. (1996) Specification for a quality management framework at departmental level. Other. Engineering Professors Council.

Burt, Graeme and Beard, C. and Dexter, Amos and Goudket, P. and McIntosh, P. and Wooldridge, E. (2006) Coupler design considerations for the ILC crab cavity. Working Paper. .

Hargreaves, J. K. and Burns, C. J. (1994) Effects of the ionosphere on the performance of space-based radar at high altitude. Working Paper. Lancaster University.

Joyce, Malcolm J. (2008) ISOLUS Technical Options Study - Independent Peer Review Report. Working Paper. MOD.

Koltsov, Denis and Richardson, Andrew (2006) Initial background search on piezoelectric weight measurement used in urimeter application. Working Paper. .

Ma, X. and Peyton, A. J. and Lionheart, W. R. B. (2007) Feasibility study for tomographic walk-through metal detector. Working Paper. Unpublished. (Unpublished)

Other

Carter, Richard and Adolphsen, C. and Beard, C. and Bellantoni, L. and Burt, G. and Chase, B. and Church, M. and Dexter, Amos and Dykes, M. and Edwards, H. and Goudket, P. and Jenkins, Richard and Jones, R. M. and Kalinin, A. and Khabiboulline, T. and Ko, K. and Latina, A. and Li, Z. and Ma, P. and McIntosh, P. and Ng, C. and Ser, I. (2006) Design of the ILC crab cavity system. .

Coleman, Glenys (2003) A review of the engineering maths first aid kit and the algebra refresher. .

Jacobson, D. and Bocking, C. and Rennie, Allan E. W. (2002) Injection mould tool manufacture in less than five days. Society of Manufacturing Engineers.

Kemp, Roger (2007) Benchmarking Transport Energy Consumption. .

Koltsov, Denis and Sofield, C. and Harker, A. (2006) Stanelco plc : Eight technical reports (commercial in confidence). . (Unpublished)

Patent

Aggidis , George A. (2004) On Patent Application filed for GGG, Kendal, UK under the title: Improvements in or relating to turbines and in particular Pelton wheel turbines. Canadian Patent: Canadian Patent Application 2,459,626. .

Aggidis , George A. (2008) On Patent Application filed for LU, Lancaster, UK under the title: “Fluid Turbine”. UK Patent: UK Patent Application Number UKIPO GB 08.11683.2. .

Aggidis , George A. (2010) On Patent Application filed for LU, Lancaster, UK under the title: “Improved Turbine”. UK Patent: UK Patent Application Number UKIPO GB GB1001034.6. .

Aggidis , George A. (2004) On Patent Application filed for GGG, Kendal, UK under the title: Improvements in or relating to turbines and in particular Pelton wheel turbines. UK Patent: UK Patent Application 0304556.4, 28 February 2003, GB, 2 398 840 A. GB, 2 398 840 A.

Bromley , Michael (2012) Method for formation of porous metal coatings. C23C 18/18.

D'Mellow , Bob (2003) Proton recoil detector and the calibration thereof. GB2422195.

Gamage , Kelum (2010) Improvements in and relating to gamma ray and neutron detection. GB1016806.0.

Joyce , Malcolm J. (2000) Chemical Sensor. GB 9719946.7, 6.

Lionheart , William R B (2008) Electromagnetic detection system. WO2008087385-A2; EP2108132-A2; GB2459790-A; CA2675587-A1; WO2008087385-A3; WO2008087385-A8; CN101688925-A; US2010207624-A.

This list was generated on Tue Jun 27 02:17:41 2017 BST.