Lancaster EPrints

Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | V | W | Y | Z
Number of items at this level: 675.

A

Abram, Thomas and Benachour, Phillip and Vuong, Tu (2009) Development of a Motion Tracking 3D CAD Input System. In: 10th National Conference on Rapid Design, Prototyping and Manufacturing, 2009-06-122009-06-12.

Adamopoulos, George (2011) Li-Doped Zinc oxide Transistors and circuits fabricated by spray deposition in ambient atmosphere. In: 7th International Thin-Film Transistor Conference, 2011-03-03.

Adamopoulos, George (2010) Low-voltage, high-mobility transparent oxide transistors fabricated by spray coating. In: Fifth International Conference on Multiscale Materials Modelling, 2010-10-04.

Adamopoulos, George and Bradley, Donal and Anthopoulos, Thomas (2011) Spray Deposited Lithium-doped Zinc Oxide Thin-film Transistors with Electron Mobility Exceeding 50 cm2/Vs. In: MRS 2010 Fall Meeting, 2010-11-30.

Adams, J. C. and Mellor, M. and Joyce, Malcolm J. (2009) Buried contamination. In: IEEE ANIMMA, 2009-06-072009-06-10.

Adams, Jamie C. and Mellor, Matthew and Joyce, Malcolm J. (2010) Depth profiling of radiological contamination in sand using Principal Component Analysis. In: IEEE NPSS International Workshop on Real Time Measurement, Instrumentation & Control, 2010-06-252010-06-26.

Aggidis, G. A. (2004) Hydropower developments – new projects and rehabilitation. In: Proceedings of the international symposium on hydro power developments. .

Aggidis, George (2006) Fluid machinery and energy research on ocean energy and hydropower. In: Proceedings of the IMechE fluid machinery group, 2006-01-01.

Aggidis, George (2006) NW hydro resource model. In: Proceedings of the marine energy seminar, 2006-01-01.

Aggidis, George (2006) Renewable energy research : ocean energy and hydropower. In: Lancaster University, Faculty of Science & Technology Christmas Conference, 2006-01-01.

Aggidis, George and Howard, D. C. and Rothschild, R. and Widden, Martin (2006) Maximising the benefits of hydropower by developing the North-West England hydro resource model. Proceedings of the International Hydro Power & Dams Construction Journal, 7 (1).

Aggidis, George A. (2004) Advanced materials for fluid machinery. In: Proceedings of the international symposium on advanced materials for fluid machinery. .

Aggidis, George A. (2000) Centrifugal pumps : the state of the art and new opportunities / Institution of Mechanical Engineers (Great Britain). Fluid Machinery Committee. Institution of Mechanical Engineers. ISBN 1860582834

Aggidis, George A. (2004) Centrifugal pumps – state of the art and new opportunities. In: Proceedings of the international symposium on centrifugal pump developments. .

Aggidis, George A. (2002) Current Situation & Perspectives of the British & European Hydro Turbine Industry & Technology for Small Hydro Power Generation.(Invited Keynote Paper). IMechE Conference Transactions, v. 200 (11).

Aggidis, George A. (2008) Developing the Northwest of England Hydro Resource Model (Invited keynote presentation). In: Joule Grant Holders Conference, 2008-01-10. (Unpublished)

Aggidis, George A. (2005) Fluid Machinery for Wave and Tidal Energy – State of the Art and New Developments. Institution of Mechanical Engineers.

Aggidis, George A. (2009) Heron Corn Mill: an integrative case study for the Northwest of England Hydro Resource Model. (Presentation). In: Watching TV by Candlelight, 2009-04-11. (Unpublished)

Aggidis, George A. (2002) Hydropower Developments – New Projects & Rehabilitation / organised by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE). IMechE Event Publications.

Aggidis, George A. (2000) Hydropower developments : new projects and rehabilitation / organized by the Fluid Machinery Committee of the Power Industries Division of the Institution of Mechanical Engineers (IMechE). IMechE seminar publication . Professional Engineering Pub. for the Institution of Mechanical Engineers. ISBN 1860583172

Aggidis, George A. (2004) Hydropower developments : new projects, rehabilitation, and power recovery / organized by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE). IMechE event publications . Professional Engineering Publishing. ISBN 1860584799

Aggidis, George A. (2005) (Invited Lecture) Advise to the Greek government on renewable energy issues, Hon. George Vagionas MP. In: Untitled event, 2004-06-01. (Unpublished)

Aggidis, George A. (2009) The Lancaster Marine Energy Research in the Context of the International Ocean Energy Symposium 2009 in China (Invited Keynote Paper). In: Proceedings of International Ocean Energy Symposium 2009(IOES-2009), 2009-09-172009-09-18.

Aggidis, George A. (2009) North West Hydro Resource Model (Invited keynote presentation). In: Joule Centre annual conference, 2009-03-25. (Unpublished)

Aggidis, George A. (2009) Ocean Energy: the Wave of the Future, Research key points and developments in the UK (Invited keynote presentation). In: Untitled event, 2009-04-08. (Unpublished)

Aggidis , George A. (2004) On Patent Application filed for GGG, Kendal, UK under the title: Improvements in or relating to turbines and in particular Pelton wheel turbines. Canadian Patent: Canadian Patent Application 2,459,626. .

Aggidis , George A. (2008) On Patent Application filed for LU, Lancaster, UK under the title: “Fluid Turbine”. UK Patent: UK Patent Application Number UKIPO GB 08.11683.2. .

Aggidis , George A. (2010) On Patent Application filed for LU, Lancaster, UK under the title: “Improved Turbine”. UK Patent: UK Patent Application Number UKIPO GB GB1001034.6. .

Aggidis, George A. (2009) Plans for tapping the tidal power potential of the Eastern Irish Sea and NWTEG (Invited keynote paper). In: All Energy 2009, 2009-05-202009-05-21. (Unpublished)

Aggidis, George A. (2005) The Pump of the Future. Water & Sewerage Journal, 3. pp. 17-20.

Aggidis, George A. (2007) Renewable Energy Research on Tidal Energy. (Presentation). In: Untitled event, 2007-03-27. (Unpublished)

Aggidis, George A. (2004) Second International Symposium on Advanced Materials for Fluid Machinery / organised by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE). IMechE conference transactions . Published by Professional Engineering Publishing. ISBN 1860584411

Aggidis, George A. (2004) Second international symposium centrifugal pumps : the state of the art and new developments / organized by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE). IMechE event publications . Professional Engineering Publishing. ISBN 1860584764

Aggidis, George A. (2008) Small Hydro Power - The Opportunities. (Invited Keynote Paper). In: Joule Centre for Energy 2008 Conference, Small Hydro Power Schemes in the North West of England: Overcoming the Barriers, 2008-04-03.

Aggidis, George A. (2001) Technological Developments on Small Hydro.(Presentation). In: IMechE, Fluid Machinery Group, 2001-05-01. (Unpublished)

Aggidis, George A. (2008) Tidal Energy research at Lancaster University. (Presentation). In: Northwest Tidal Energy Group Inaugural Meeting, 2008-01-25. (Unpublished)

Aggidis, George A. (2004) Water Renewables Research at Lancaster University. (Presentation). In: European Community Coordination Action for Ocean Energy, 2004-11-01. (Unpublished)

Aggidis, George A. (2008) Wave and Tidal Marine Energy Research. (Invited speaker). In: the UK/Taiwan Marine Energy Round Table & Workshop, 2008-11-042008-11-05. (Unpublished)

Aggidis, George A. (2004) The facts and fiction of renewable energy. In: Proceedings of the UK energy policy conference: will the lights go out? .

Aggidis , George A. (2004) Improvements in or relating to turbines and in particular Pelton wheel turbines. .

Aggidis , George A. (2004) On Patent Application filed for GGG, Kendal, UK under the title: Improvements in or relating to turbines and in particular Pelton wheel turbines. Japanese Patent: Japanese Patent P2004-263697A,. P2004-263697A.

Aggidis , George A. (2004) On Patent Application filed for GGG, Kendal, UK under the title: Improvements in or relating to turbines and in particular Pelton wheel turbines. UK Patent: UK Patent Application 0304556.4, 28 February 2003, GB, 2 398 840 A. GB, 2 398 840 A.

Aggidis , George A. (2004) on Patent Application filed for GGG, Kendal, UK under the title: Improvements in or relating to turbines and in particular Pelton wheel turbines. EU Patent: European Union Patent Application, EC: F03B1/02, IPC: F03B1/02; (IPC1-7): F03B1/02, Publication info: CA2459626 - 2004-08-28, 28 August 2004, EP 1 452 731 A2 01.09.2004 and EP 1 452 731 A3, 28.02.2007. F03B1/02.

Aggidis, George A. and Brett, Chris (2010) The Launch of the Heron Corn Mill Hydro Plant(Invited Keynote Paper). In: What's on in the Southern Lake District, 2010-04-03. (Unpublished)

Aggidis, George A. and Broatch, H. (2007) Morecambe Bay: Innovation for Clean Energy Generation. In: British Hydropower Association (BHA) Annual Conference 2007, Delivering the Next Generation, 2007-10-102007-10-11.

Aggidis, George A. and Howard, David C. and Wright, Simon M. and Scott, Richard (2006) Energy source or sink? : The role of Uplands in meeting our energy targets. The International Journal of Biodiversity Science and Management, 2 (3). pp. 196-199. ISSN 1745-1604

Aggidis, George A. and Huang, M. (2007) The New Hydro – Ocean Energy. In: British Hydropower Association (BHA) Annual Conference 2007, Delivering the Next Generation, 2007-10-102007-10-11.

Aggidis, George A. and Huang, M. (2006) Research on wave energy converters and mooring systems in the United Kingdom. Water Resources and Power Journal (in Chinese), 24 (4). pp. 37-40.

Aggidis, George A. and Leigh, P. A. and Luchinskaya, E. R. and Timmis, R. and Howard, D. C. and Walker, G. and Cass, N. and Beven, K. and Heathwaite, A. Louise and Rothschild, R. and Young, A. and Haxton, T. (2008) Informatics Analysis for Hydro-power Schemes across Northwest England. (Presentation). In: British Hydro Association Annual Conference, 2008-09-172008-09-18. (Unpublished)

Aggidis, George A. and Luchinskaya, E. and O'Donnell, H. and Saha, Sh. (2008) Novel Hydro-power performance envelopes. In: British Hydropower Association (BHA) Annual Conference 2008, Stepping into the Spotlight, 2008-09-172008-09-18.

Aggidis, George A. and Luchinskaya, E. and Rothschild, R. and Howard, D. C. (2008) The costs of small-scale hydro power production: Impact on the development of existing potential. In: 15th International Conference on Hydropower Plants in the Context of the Climate Change, 2008-11-262008-11-28.

Aggidis, George A. and Luchinskaya, E. and Rothschild, R. and Howard, D.C. (2008) An analysis of the costs of small-scale hydro power for progressing world hydro development. In: Hydro 2008, 2008-10-062008-10-08.

Aggidis , George A. (2008) On Patent Application filed for Lancaster University (LU), Lancaster, UK (50%) and the Environment Agency, Timmis R. (50%), under the title: “Active wildlife ladder”. UK Patent: UK Patent Application Number UKIPO GB 08.14293.7. .

Ahsan, M. N. and Bradley, R. and Pinkerton, A.J. (2010) X-ray analysis of pore formation in direct metal deposition and its causes. In: Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 159-165.

Ahsan, M. N. and Wang, W. and Pinkerton, A.J. (2010) An iterative, energy-mass balance model for laser metal deposition. In: Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 149-158.

Ahsan, M. Naveed and Pinkerton, Andrew J. and Ali, Laiq (2012) A comparison of laser additive manufacturing using gas and plasma-atomized Ti-6A1-4V powders. In: Innovative Developments in Virtual and Physical Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, Boca Raton, pp. 625-633. ISBN 978-0-415-68418-7

Ali, F. and Honary, B. (1994) A symbol synchronisation technique for multi-tone multiple access channel transmission system. In: Proceedings of the IEEE international conference on telecommunications. IEEE, Dubai, pp. 134-137.

Anapolitanos, I and Lam, Dennis and Ye, Jianqiao (2006) Strengthening ductile metallic structures using externall bonded fibre reinforced composite materials. In: Steel and Aluminium Structures, ICSAS'07:. Oxford Brookes University, Oxford. ISBN 9780955625404

Anderson, D. C. (1994) Case study contribution. In: Alternative approaches to teaching engineering. Engineering Professors' Council with the UK Universities' and Colleges' Staff Development Agency, Sheffield. ISBN 1858890233

Anderson, D. C. (1992) A project-based heat transfer course. International Journal of Mechanical Engineering Education, 20 (2). ISSN 2050-4586

Andrieux, Fabrice and Boxall, Colin and Taylor, Robin (2011) Determination of the Constants of Formation of Complexes of Iron(III) and acetohydroxamic acid. In: Applications of Thermodynamics to Biological and Materials Science. InTech, Rijeka, Croatia, pp. 441-458. ISBN 978-953-307-980-6

Andrieux, Fabrice and Boxall, Colin and Taylor, Robin and Mason, C. (2006) Modelling the Hydrolysis of Actinide Complexed Hydroxamic Acid Ligands. In: RSC Special Publication. Royal Society of Chemistry, Cambridge, pp. 626-628. ISBN 978-0-85404-678-2

Arani, F. and Honary, B. and Smietana, R. (1994) DSP implementation of a channel evaluation technique based on fuzzy logic and TCM. In: Proceedings of the third UK/Australian international symposium on DSP for communications systems. Proceedings of the third UK/Australian international symposium on DSP for communications systems, Warwick, pp. 123-125.

Ariadi, Yudhi and Hasan, Saad and Smith, Paul and Rennie, Allan (2008) Development of an Additive Layer Manufacturing business model: creating an environment to support designers from concept to distribution. In: Proceedings of 32nd Japan Rapid Prototyping Symposium. , pp. 79-84.

Ariadi, Yudhi and Rennie, Allan (2008) Design templates for consumer use in customising additive layer manufactured products. In: 9th National Conference on Rapid Design, Prototyping and Manufacturing. MJA Print, Beaconsfield, pp. 137-144. ISBN 978-0-948314-55-1

Arnai, F. and Honary, B. (1993) Trellis coded modulation over Z4. In: Proceedings of the 2nd international symposium on communication. , Ambleside, p. 93.

Arnai, F. and Honary, B. (1993) Trellis coded modulation over rings. In: Proceedings of the 5th Bangor communication symposium. , Bangor, pp. 16-20.

Ash, D. and Joyce, Malcolm J. and Port, S. N. (2000) The quartz crystal microbalance: an electronic sensor for dynamic fluid mechanics. In: Proceedings of the regional symposium on quality and automation (RESQUA 2000). .

Ash, D. and Joyce, Malcolm J. and Port, S. N. and Barnes, Chris (2000) Nuclear reprocessing stream analysis using the quartz crystal microbalance. In: Proceedings of the universities nuclear technology forum. .

Ash, D. and Joyce, Malcolm J. and Port, S. N. and Barnes, Chris (2000) The quartz crystal microbalance: an electronic sensor for dynamic fluid mechanics. In: Proceedings of 2nd conference on postgraduate research in electronics and photonics. .

Ash, D. C. and Joyce, Malcolm J. and Garnham, G. W. and Barnes, C. and Port, S. N. (2001) Innovative electronic analysis device for nuclear fuel reprocessing. In: Proceedings of the 9th international conference on nuclear engineering (ICONE9). .

Aspinall, Michael and D′Mellow, B. and Mackin, R. O. and Joyce, M. J. and Peyton, Anthony (2007) Digital advances in pulsed fast neutron analysis for applications in counter terrorism. In: European Nuclear Congress, 2007-09-162007-09-20.

Aspinall , Michael (2010) Apparatus and Method for Radiation Analysis. CAB/P132779GB.

Aspinall, Michael and Joyce, Malcolm J. (2006) Counter terrorism using commercial hardware - the 55,000,000 km/hour speed trap. In: Proceedings of the SET for Britain House of Commons science exhibition. .

B

BARTOLUCCI, G and GIANNINI, F and PAOLONI, C (1989) Beam forming networks for active antenna systems. Space Communications, 6 (5). pp. 397-407. ISSN 0924-8625

BARTOLUCCI, G and GIANNINI, F and PAOLONI, C (1990) On the design of optimized microstrip radial line power dividers. In: Conference proceedings, 20th European Microwave Conference 90 : Monday 10th to Thursday 13th September 1990, Duna Inter-Continental Hotel, Budapest, Hungary. Microwave Exhibitions and Publishers, Tunbridge Wells, pp. 1047-1052. ISBN 0-946821-07-0

Bakari, M. J. and Seward, Derek W. and Taylor, C. James (2009) The Development of a Prototype of a Multi-Arm Robotic System for Decontamination and Decommissioning (D&D) Applications within the Nuclear Industry. In: 12th International Conference on Environmental Remediation and Radioactive Waste Management, 2009-10-112009-10-15.

Baker, N. J. and Aggidis, George A. and Widden, Martin B (2007) Low-head low-cost hydro power by conversion to air pressure. In: British Hydropower Association (BHA) Annual Conference 2007, Delivering the Next Generation, 2007-10-102007-10-11.

Baker, N. J. and Mueller, M. A. and Taverner, P. J. (2005) Prototype development and testing of direct drive linear electrical machines for marine energy converters. In: Proceedings of the world renewable energy conference. .

Baker, Nick J. and Mueller, M. and Ran, L. and Tavner, P. (2007) Development of Linear test rig for electrical Power take off from waves. Journal of Marine Engineering and Technology, A10. pp. 3-15. ISSN 1476-1548

Baker, Nick J. and Ran, L. and Tavner, P. J. and Mueller, M. A. and McDonald, S. (2006) Power conversion and control for a low speed, mermanent magnet, direct-drive, wave energy converter. In: Proceedings of the IEE 2nd international PEMD conference. .

Bandala Sánchez, Manuel and Joyce, Malcolm J. (2007) Tumour motion tracking: experiences with microsystems and sensors for radiotherapy. In: European Nuclear Congress, 2007-09-162007-09-20.

Barlow, M. I. and Burge, S. E. and Roskilly, A. P. (1993) Design and implementation of a transputer based robot control system. In: Parallel processing in a control systems environment. Prentice Hall, New York, pp. 209-232. ISBN 0136515304

Bashir, Aneeqa and Wöbkenberg, Paul and Smith, Jeremy and Adamopoulos, George and Bradley, Donal and Anthopoulos, Thomas (2009) Transparent metal oxide thin-film transistors prepared by spray pyrolysis. In: EMRS Spring Meeting 2009, 2009-06-08.

Bennett, D. and Burge, S. E. and Bradshaw, A. (1998) Non-linear controller design for a highly coupled VSTOL aircraft. In: Proceedings of the UKACC international conference on control ’98. , Swansea, pp. 1510-1515.

Benson, C. and Joyce, M. J. and Winsby, A. and Silvie, J. (2001) Monte-Carlo Calculation of the Response Functions for Two Prototype Cosmic Neutron Metrology Instruments. In: International Conference on Nuclear Data for Science and Technology (ND2001), 2001-10-072001-10-12.

Benson, C. and Joyce, Malcolm J. and Kestell, D. and Stevenson, D. and Mathewson, A. and Price, R. A. and Silvie, J. (2003) Towards Reactor Dosimetry with MOSFET devices. In: Reactor Dosimetry in the 21st Century: Proceedings of the 11th International Symposium on Reactor Dosimetry. World Scientific Publishing Co. Pte Ltd. ISBN 9789812384485 9812384480

Benson, C. and Joyce, Malcolm J. and Winsby, A. and Silvie, J. (2002) Monte-Carlo calculation of the response functions for two prototype cosmic neutron metrology instruments. Journal of Nuclear Science and Technology, S2 (2). pp. 1361-1364. ISSN 0022-3131

Bhagate, Kiran and Ye, Jianqiao and Singh, Arbind (2012) Static shape control using piezoelectric actuator. In: Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Compsite Structures. .

Bhinder, M. A. and Rahmati, M. T. and Aggidis, George A. and Chaplin, R. V. and Mingham, C. G. and Causon, D. M. (2009) Numerical and Experimental Study of a Point Absorbing Wave Energy Converter in Regular and Irregular Waves. In: International Conference on CLEAN ELECTRICAL POWER, Renewable Energy Resources Impact, 2009-06-092009-06-11.

Bhinder, M. A. and Rahmati, M. T. and Aggidis, George A. and Chaplin, R. V. and Mingham, C. g. and Causon, D. M. (2009) A Joint Numerical and Experimental Study of a Surging Point Absorbing Wave Energy Converter. In: 28th ASME International Conference on Ocean, Offshore and Arctic Engineering, 2009-05-312009-06-05.

Bhinder, M. A. and Rahmati, M. T. and Aggidis, George A. and Mingham, C. G. and Chaplin, R. V. and Causon, D. M. (2009) Numerical & Experimental Flow Analysis of a Wave Energy Converter. In: Proceedings of The 8th European Wave and Tidal Energy Conference, 2009-09-072009-09-10.

Binns, R. and Davis, C. and Dickinson, S. J. and Morris, P. F. and Peyton, A. J. and Papaelias, M. P. H. and Pritchard, W. D. N. and Strangwood, M. (2002) Developments in the use of electromagnetic methods to monitor cooling transformations in steel samples. In: Proceedings of the IOM conference: instrumentation to innovation - applications and developments in metal production and use. .

Binns, R. and Dickinson, S. J. and Peyton, A. J. (2001) Detection of phase transformation in hot strip steel samples using a multi-frequency electromagnetic impedance measuring node. In: Proceedings of the 11th conference on sensors and their applications. , pp. 45-50.

Binns, R. and Johnstone, S. and Mallinson, S. and Meydan, T. and Peyton, A. J. (1999) Using electromagnetic methods to monitor phase transformation in steel samples. In: Proceedings of the institute of material conference: advances in on-line instrumentation for finishing processes in strip production. , London.

Binns, R. and Johnstone, S. and Morris, P. F. and Peyton, A. J. and Pritchard, W. D. N. (2000) Developments in the use of electromagnetic methods to monitor the transformation of steel samples. In: Proceedings of the institute of material conference: measurement technology and information management through the process route. .

Bissessur, Y. and Peyton, A. J. (2002) A forward model for planar array EMT imaging of cylindrical conductors embedded in a non-conducting medium. In: Proceedings of the 2nd international symposium on process tomography. .

Blake, T. E. and Chaplin, R. V. (1998) The P S FROG: latest developments and model testing. In: Proceedings of the 3rd European wave energy conference. , Patras, Greece.

Boampong, D. K. and Green, S. M. and Unsworth, A. (2003) N+ ion implantation of Ti6Al4V alloy and UHMWPE for total joint replacement application. Journal of Applied Biomaterials and Biomechanics, 1. pp. 164-171. ISSN 1722-6899

Bocking, C. and Jacobson, D.M and Rennie, Allan (2001) An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts. In: Time Compression technologies Conference 2001. Rapid News Publications PLC.

Bocking, C. and Jacobson, D.M and Rennie, Allan (2001) Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming. In: 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of. , pp. 412-415.

Bocking, C. and Rennie, Allan and Bennett, G. and Lewis, N. (2000) Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode. In: Time Compression Technologies 2000 Conference. Rapid News Publications PLC, pp. 151-156.

Bocking, C. E. and Rennie, Allan and Bennett, Graham R. (2000) Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models. In: 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, pp. 469-477. ISBN 1053-2153

Bonner, T.J. and Green, S.M. and McMurty, I.A. (2012) A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES. Journal of Bone and Joint Surgery, British Volume, 94-B (SUPP X). p. 20. ISSN 0301-620X

Bouamrane, Faycal and Bouvet, T. and Megtert, S. and Brunetti, F. and Mineo, Mauro and Paoloni, C. and Tamburri, E. and Terranova, M.L. and Ulisse, G. and Di Carlo, A. and Marchesin, R. and Pham, K. and Durand, A.J. and Kotiranta, M. and Krozer, V. and Guiset, P. and De Rossi, A. and Schnell, J.P. and Legagneux, P. and Dolfi, D. and Fiorello, A.M. and Dispenza, M. and Secchi, A. and Zhurbenko, V. and Gohier, A. and Cojocaru, C.-S. (2011) LIGA-based Slow Wave Structure for a THz Vacuum Amplifier. In: Proceedings of High Aspect Ratio Micro Structure Conference HARMST 2011. , Taiwan.

Bracewell, R. H. and Chaplin, R. V. and Bradley, D. A. (1992) Schemebuilder and layout: computer based tools to aid the design of mechatronic systems. In: IMechE Conference: Mechatronics - the integration of engineering design. , Dundee, pp. 1-6.

Bracewell, R. H. and Chaplin, R. V. and Bradley, D. A. and Langdon, P. M. and Sharpe, John (1993) Schemebuilder: a design aid for the conceptual stage of product design. In: Proceedings of the 9th international conference on engineering design, ICED '93. Heurista, Zurich.

Bracewell, R. H. and Chaplin, R. V. and Langdon, P. M. and Li, M. and Oh, V. K. and Sharpe, J. E. E. (1995) Integrated platform for AI support of complex design (part II): supporting the embodiment process. In: Proceedings of the 1995 Lancaster international workshop on engineering design published as AI support for conceptual design. Springer-Verlag, Ambleside, pp. 189-207.

Bracewell, R. H. and Chaplin, R. V. and Langdon, P. M. and Li, M. and Oh, V. K. and Sharpe, J. E. E. and Yan, X. T. (1994) Integrated computer support for interdisciplinary system design. In: Proceedings of the 3rd international conference on artificial intelligence in design. , Lausanne.

Bracewell, R. H. and Sharpe, John (1994) The use of bond graph methodology in an integrated interdisciplinary design system. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton, pp. 595-600.

Bradley, D. A. (1993) Sensors in manufacturing systems. In: Sensors and actuators VI. Institute of Physics, pp. 411-422.

Bradley, D. A. and Bracewell, R. H. (1992) Computer support for engineering design - the schemebuilder project. In: SERC/IMechE expert meeting on information technology and product design. , St Albans, pp. 69-73.

Bradley, D. A. and Bradshaw, A. and Seward, D. W. and Margrave, F. W. (1994) Mechatronics and intelligent systems. In: Proceedings of the second IEE international conference on intelligent systems engineering. IEE, London, pp. 395-400.

Bradley, D. A. and Buur, J. (1993) The representation of mechatronic systems. In: Proceedings of the 9th international conference on engineering design, ICED '93. Heurista, Zurich, pp. 37-44.

Bradley, D. A. and Dorey, A. P. and Silvester, P. J. and Adelson, R. M. (1992) An integrated electronic degree scheme - the Lancaster electronics course. In: Innovative teaching in engineering. Ellis Horwood, London. ISBN 0134576071

Bradley, D. A. and Larbes, C. (1994) The development of a boost-modulated controller for a pwm inverter and a three-phase induction motor based drive Part 1. In: Proceedings of an international ASME conference on systems - analysis, control and design, SYS'94. , Lyon, pp. 49-64.

Bradley, D. A. and Larbes, C. (1994) The development of a boost-modulated controller for a pwm inverter and a three-phase induction motor based drive Part 2. In: Proceedings of an international ASME conference on systems - analysis, control and design, SYS'94. , Lyon, pp. 65-80.

Bradley, D. A. and Seward, D. W. (1992) Artificial intelligence and robot construction plant - the smart artisan. In: IEE colloquium on artificial intelligence in civil engineering. , London, 8/1-8/3.

Bradley, D. A. and Seward, D. W. (1992) Artificial intelligence in the operation of construction plant. In: 9th international symposium on automation and robotics in construction. , Tokyo.

Bradley, D. A. and Seward, D. W. (1995) Developing real-time autonomous excavation - the LUCIE story. In: Developing real-time autonomous excavation - the LUCIE story. , New Orleans, pp. 3028-3033.

Bradley, D. A. and Seward, D. W. (1992) The Lancaster University computerised excavator programme. In: Mechatronics - the integration of engineering design. IMechE, Dundee, pp. 163-168.

Bradley, D. A. and Seward, D. W. and Heikkila, T. and Vaha, P. (1994) Control architectures and operational strategies for intelligent, high-powered manipulators. In: Proceedings of the 11th international symposium on automation and robotics in construction XI (ISARC). Elsevier, Amsterdam, pp. 367-372.

Bradshaw, A. (1999) Mechatronics knowledge management. In: Proceedings of the second world manufacturing conference: keynote speech. , Durham.

Bradshaw, A. and Counsell, J. M. (1993) Advanced digital controllers for servo-pneumatic actuated machines. In: Proceedings of IMechE seminar on machine actuators. , London, pp. 5-9.

Bradshaw, A. and Counsell, J. M. (1997) Computer aided conceptual design '97 : proceedings of the 1997 Lancaster International Workshop on Engineering Design CACD'97. Lancaster University: Centre for the Study of Environmental Change.. ISBN 1862200262.

Bradshaw, A. and Counsell, J. M. (1992) Design of autopilots for high performance missiles. Journal of Systems and Control, 206. pp. 75-84.

Bradshaw, A. and Counsell, J. M. (1998) A knowledge based mechatronics approach to controller design. In: Proceedings of the UKACC international conference on control ’98. , Swansea, pp. 1723-1727.

Bradshaw, A. and Dickinson, S. J. (1993) Multi-tariff optimisation for domestic heating systems which combine the use of storage and direct heaters. In: Proceedings of the international conference on engineering software. , Stafford, pp. 43-49.

Bradshaw, A. and Ding, L. and Taylor, C. James (2003) Characteristic comparison of control systems for a nuclear power plant. In: Proceedings of the international conference on agile manufacturing (ICAM2003). , pp. 4-6.

Bradshaw, A. and Seward, D. W. and Nagy, F. N. (1994) Robo Sapiens: a personal assistant robot. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton, pp. 159-164.

Bratt, Adrian and Baker, K. and Richardson, A. M. D. and Welbers, A. (1994) Development of class 1 QTAG monitor. In: Proceedings of an international test conference: the next 25 years. IEEE Service Centre.

Bratt, Adrian and Harvey, R. J. A. and Dorey, A. P. (1992) Analogue behavioural modelling at systems level. In: IEE PG EC10/C11 colloquium on linear analogue circuits and systems. IEE, 14/1-14/9.

Bratt, Adrian and Harvey, R. J. A. and Dorey, A. P. and Richardson, A. M. D. (1993) Aspects of current reference generation and distribution for IDDx pass/fail current determination. In: Proceedings of the IEE colloquium on mixed signal VLSI test, digest No 1993/240. , London.

Bromley , Michael (2012) Method for formation of porous metal coatings. C23C 18/18.

Brown, M. W. and Burge, S. E. and Bradley, D. A. (1996) An infrared sensor for an electric wheelchair obstacle avoidance system. In: Proceedings of the 5th mechatronics forum international conference. , Portugal, pp. 35-40.

Burbidge, M. and Georgopoulos, K. and Lechner, A. and Richardson, A. (2006) Bit-stream manipulation for SD modulator failure mode analysis. In: Proceedings of the 11th IEEE European test symposium. .

Burbidge, M. and Lechner, A. and Bell, G. and Richardson, Andrew M. D. (2004) Motivations and techniques of built in self-test for embedded frequency synthesis systems incorporating charge pump phase-locked loops. In: IEE proceedings - circuits, devices and systems. , pp. 337-348.

Burbidge, M. and Richardson, Andrew M. D. and Lechner, A. (2001) Test techniques for embedded charge pump phase-locked loops: problems, current BIST techniques and alternative suggestions. In: Proceedings of the 7th IEEE international test workshop. , pp. 97-102.

Burbidge, M. J. (2004) Simple frequency counting techniques for analysis of VCO/CP-PLL coupled noise sensitivity in fully embedded CP-PLLs. In: Proceedings of the 2nd IEE integrated circuit test conference. .

Burbidge, M. J. and Tijou, J. Richardson (2002) Investigations of automatic built in transient step response monitoring for embedded second order charge pump phase locked loop frequency synthesisers. In: Proceedings of the 8th IEEE mixed signal test workshop. .

Burbidge, Martin J. and Tijou, Jim and Richardson, Andrew M. D. (2003) Investigations of automatic built in transient step response monitoring for embedded second order charge pump phase locked loop frequency synthesizers. Journal of Electronic Testing. ISSN 0923-8174

Burbidge, Martin John (2004) Phase locked loop system design and measurement tutorial consisting of physical hardware and co-simulation environment. International Journal of Electrical Engineering Education, 41 (4). pp. 358-374. ISSN 0020-7209

Burge, S. E. (1993) Structure and design of manufacturing systems: units 4/5 manufacturing strategy. Open University.

Burge, S. E. and Felton, R. D. (1996) Reduction of structural coupling in advanced fighter aircraft by active structural mode control. In: Proceedings of the UKACC international conference control '96. , pp. 626-631.

Burge, S. E. and Grout, I. A. and Dorey, A. P. (1994) Application specific integrated circuit implementation of siso control laws. In: Proceedings of the IEE international conference on control '94. IEE, London, pp. 1104-1110.

Burge, S. E. and Tannock, J. D. T. (1993) An implementation programme for quality assurance systems in an engineering department. In: Proceedings of SEFI annual conference 'achieving and assessing quality of engineering education'. Lulea University of Technology, Sweden, pp. 169-180.

Burge, S. E. and Tannock, J. D. T. (1994) A practical approach to implementing quality management in higher education. In: Engineering professors' council: occasional paper. Newcastle University, pp. 1104-1110.

Burge, S. E. and Tannock, J. D. T. (1993) A practical approach to total quality management in higher education. In: Proceedings of the Newcastle international conference on 'quality and its applications'. Newcastle University.

Burge, S. E. and Tannock, J. D. T. and Jackson, N. (1996) Specification for a quality management framework at departmental level. Other. Engineering Professors Council.

Burns, C. J. and Hargreaves, J. K. (1994) The occurrence and properties of large-scale irregular structures in the auroral F region. In: Proceedings of an international beacon satellite symposium. .

Burt, Graeme and Beard, C. and Dexter, Amos and Goudket, P. and McIntosh, P. and Wooldridge, E. (2006) Coupler design considerations for the ILC crab cavity. Working Paper. .

Burt, Graeme and Dexter, Amos and Bellatoni, L. and Goudket, P. and Beard, C. and Kalinin, A. and Ma, L. (2005) Crab cavity system for the ILC. In: Proceedings of the ALCPG and ILC workshops. .

C

Carter, R. G. and Bailey, A. (1994) Dielectric measurement with microstrip resonators. In: Proceedings of a conference: microwaves '94: the applications of RF, microwave and millimetre wave technologies. Nexus Business Communications, Swanley; England.

Carter, R. G. and Ball, E. M. and Brady, M. B. (1997) Magnetron frequency twinning. In: Proceedings of the ESA/NATO workshop on microwave tubes for space, military and commercial applications. ESTEC, The Netherlands, p. 127.

Carter, R. G. and Cooke, F. and Neal, R. (1996) Action-centred learning in industry. In: Management of independent learning. Routledge. ISBN 0749419490.

Carter, R. G. and Wang, P. (1997) Equivalent circuit modelling of helix slow-wave structures. In: Proceedings of the ESA/NATO workshop on microwave tubes for space, military and commercial applications. ESTEC, The Netherlands, p. 127.

Carter, R. G. and Wang, P. (1994) An equivalent circuit model for helix slow-wave structures. In: Proceedings of a conference: microwaves '94: the applications of RF, microwave and millimetre wave technologies. Nexus Business Communications, Swanley.

Carter, Richard and Adolphsen, C. and Beard, C. and Bellantoni, L. and Burt, G. and Chase, B. and Church, M. and Dexter, Amos and Dykes, M. and Edwards, H. and Goudket, P. and Jenkins, Richard and Jones, R. M. and Kalinin, A. and Khabiboulline, T. and Ko, K. and Latina, A. and Li, Z. and Ma, P. and McIntosh, P. and Ng, C. and Ser, I. (2006) Design of the ILC crab cavity system. .

Carter, Richard G. (2001) Computer modelling of microwave tubes - a review. In: Proceedings of IVEC ’2001. .

Carter, Richard G. (1984) Engineering curriculum design. IEE Proceedings - Part A: Physical Science, Measurements and Instrumentation, Management and Education, Reviews, 131 (9). pp. 678-683. ISSN 0143-702X

Carter, Richard G. and MacGregor, A. (2001) Effects of imperfections on periodic permanent magnet focussing of electron beams. In: Proceedings of IVEC ’2001. .

Castle, T. and Anderson, D. C. (1996) Modelling of an integrated supermarket refrigeration and heating system using natural refrigerants. In: Proceedings of the 6th international refrigeration conference. , Indiana.

Cattley, R. and Widden, Martin B. and Aggidis, George A. (2005) Low Head Hydropower Developments. Proceedings of the world renewable energy congress.

Celik, Kursat and Caglayan, Nuri and Cinar, R and Ucar, M and Ersoy, H and Rennie, Allan (2012) Stress analysis of a sample marine crane’s boom under static loading condition. In: 5th International Mechanical Engineering Forum 2012. , Prague, Czech Republic, pp. 246-256. ISBN 978-80-213-2291-2

Celik, Kursat and Karayel, Davut and Caglayan, Nuri and Rennie, Allan and Akinci, Ibrahim (2010) Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter. In: 11th National Conference on Rapid Design, Prototyping and Manufacturing. CRDM Ltd, High Wycombe, pp. 181-191. ISBN 978-0-9566643-0-3

Celik, Kursat and Rennie, Allan and Topakci, Mehmet and Akinci, Ibrahim (2011) Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools. In: Proceedings of the XXXIV CIOSTA CIGR V Conference 2011. .

Chandy, R. P. and Morgan, R. and Scully, P. J. (1999) Optical methods of sensing. Transactions of the Institute of Measurement and Control. ISSN 1477-0369

Chandy, R. P. and Morgan, R. and Scully, P. J. (1999) The drag force flowmeter. In: The measurement, instrumentation and sensors handbook. Electrical engineering handbook series . IEEE Press/CRC Publication. ISBN 0849383471

Chandy, R. P. and Scully, P. J. (1999) A novel method of measuring biofilms in cooling towers using an optical fibre sensor. Optics Letters. ISSN 0146-9592

Chandy, R. P. and Scully, P. J. and Morgan, R. (1999) Measurement of fluid speed and direction using a fibre optic drag force flow sensor. IEEE Transactions on Instrumentation and Measurement, 48. ISSN 0018-9456

Chaplin, R. V. and Aggidis, George A. (2007) WRASPA: Wave Interactions and Control for Pitching-Surge Point-Absorber Wave Energy Converters. In: Proceedings of the 7th European Wave and Tidal Energy Conference, 2007-09-112007-09-14.

Chaplin, R. V. and Folley, M. S. (1998) Sea-bed devices technical comparisons of existing and new types. In: Proceedings of the third European wave energy conference. , Patras, Greece.

Charbit, G. and Honary, B. (1993) DSP implementation of an RS coded frequency hopping MFSK scheme with various channel impairments. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 86-87.

Chen, H-C and Blackburn, J. and Pinkerton, A.J. and Li, L. and Hilton, Paul (2008) A comparative study of single mode fibre laser and Nd:YAG laser welding of Ti-6Al-4V. In: Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, pp. 163-168.

Chen, H-C and Pinkerton, A J and Li, L. (2008) Single mode fibre laser welding of dissimilar aerospace alloys. In: Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, pp. 505-510.

Cheng, Chun-Yee and Dawson, Richard and Kelsall, Geoff and Robson, Anna (2007) Electrochemical Reactors for Metal Recovery from Aqueous Halide Electrolyte Solutions. In: TMS 2007 Annual Meeting & Exhibition, 2007-02-252007-03-01.

Chippendale, P. and Arthur, P. and Maundrell, M. and Honary, B. (1994) Robust compression technique for raster document transmission. In: Proceedings of the third UK/Australian international symposium on DSP for communications systems. , Warwick, pp. 93-95.

Chua, L. and Oh, K. S. V. and Bradley, D. A. and Dawson, D. (1993) Concurrent engineering: a taxonomy of techniques. In: Proceedings of the 2nd international conference on computer integrated manufacturing (ICCIM '93). , Singapore, pp. 265-270.

Chuter, Graham S. J. and Cloke, David J. and Green, Sarah M. and Partington, Paul F. (2006) MATERIALS TESTING AND VOLUMETRIC ANALYSIS OF EXPLANTED ABG I CUP INSERTS. Journal of Bone and Joint Surgery, British Volume, 88-B (SUPP I). p. 246.

Clark, P. D. J. and Horley, N. and Darnell, M. and Honary, B. (1993) DSP Modem/Codec implementation for long-range radio applications. In: Proceedings of the IEE colloquium on DSP applications in communication systems. , 2.1-6.

Clark, P. D. J. and Horley, N. and Darnell, M. and Honary, B. and Maundrell, M. (1993) An integrated MFSK modem/codec. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 80-82.

Coleman, Glenys (2003) A review of the engineering maths first aid kit and the algebra refresher. .

Comerford, D. P. and Quayle, Stephen D. (2004) A structured approach to the simplification of optimization problems in a virtual prototyping environment. In: Proceedings of the 5th national conference on rapid design, prototyping and manufacture. , pp. 37-44.

Counsell, J. M. (1997) Design principles for mechatronic systems. In: Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Lancaster University: Lancaster Engineering Design Centre, Lancaster, pp. 17-26. ISBN 1862200262

Counsell, J. M. and Dawson, D. (1999) CACD and further developments. In: Proceedings of the 1999 Lancaster international workshop on engineering design: Computer-aided conceptual design ’99 (CACD ’99). , Windermere, pp. 165-170.

Counsell, J. M. and Porter, I. (1998) Schemebuilder mechatronics: design principles for controller design. In: Proceedings of ICAM ’98. , Okayama, Japan.

Counsell, J. M. and Porter, I. and Duffy, M. (1998) Schemebuilder: CACD for mechanism motion control. In: Proceedings of a workshop on power transmission and motion control. University of Bath.

Cross, P. and Taylor, C. James and Aggidis, A. (2009) Feed-forward control of a nonlinear power take-off simulation for wave energy conversion. In: 20th International Conference on Systems Engineering. .

Cross, Philip and Taylor, C. James and Aggidis, George A. (2010) Continuous-time feed-forward proportional-integral-plus control. In: UKACC International Conference Control 2010. , pp. 229-234. ISBN 978-184600-0386

D

D'Mellow, B. and Joyce, Malcolm J. and Jarrah, A. (2005) Development of the nSpect portable neutron spectrometer. In: European Nuclear Congress, 2005-01-01.

D'Mellow, Bob and Jarrah, Z. and Joyce, Malcolm J. (2005) The Design of a Portable Neutron Spectrometer. In: Proceedings of the 9th European nuclear conference (ENC 2005). .

D'Mellow , Bob (2003) Proton recoil detector and the calibration thereof. GB2422195.

Darnell, M. and Clark, P. D. J. and Honary, B. (1992) The HWCL DSP32C system. In: First international symposium on DSP for communication systems. University of Warwick.

Darnell, M. and Clark, P. D. J. and Honary, B. and Horley, N. J. and Maundrel, M. and Vongas, G. (1992) Adaptive DSP-based MFSK modems for HF aeromobile channels. In: IEEE military communications conference. , San Diego, pp. 1086-1091.

Darnell, M. and Honary, B. (1993) Extraction and application of channel state data in digital communication schemes. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 349-351.

Darnell, M. and Honary, B. and Grayson, M. and Zolghadr, F. (1993) A novel DSP-based data synchronisation technique. In: Proceedings of IEEE ICC '93. , Geneva, pp. 821-826.

Darnell, M. and Honary, B. and Vongas, G. (1992) Adaptive communication system design for HF/VHF multiple-mechanism propagation paths. In: IEEE military communications conference. , San Diego, pp. 1053-1058.

Darnell, M. and Honary, B. and Yung, H. N. and Charbit, G. and Harris, R. (1992) Design and stimulation of FHSS systems for UHF aeromobile channels. In: IEEE military communications conference. , San Diego, pp. 463-468.

Davies, A. T. and Bradshaw, A. (1993) Solution and transputer computation of the forward geometry of a manipulator with fully parallel architecture. In: Robotics: applied mathematics and computations aspects. Clarendon Press, Oxford, pp. 391-402.

Davis, C. L. and Dickinson, S. J. and Peyton, A. J. (2005) Process control in the hot strip mill – impedance spectroscopy for remote analysis of steel microstructures. Ironmaking and Steelmaking, 32 (5). pp. 381-384. ISSN 1743-2812

Dawson, D. (1992) Fluid power actuators. In: Actuators for control and measurement. IOP Publishing, Philadelphia.

Dawson, D. (1994) Mechatronics moves into muck shifting. Journal of the Institute of Electronics and Electronic Engineering, 5 (4). pp. 23-5.

Dawson, D. and Turnbull, S. R. (1995) The securing of vehicles on roll-on/roll-off ships. Quarterly Transactions of the Royal Institution of Naval Architects, 137. pp. 37-53.

Dawson, Richard (2006) The electrochemcial recovery of platinum and palladium from spent alumina supported catalysts. PhD thesis, .

Dawson, Richard and Kelsall, Geoff (2004) Electrochemical recovery of precious metals from alumina-supported catalysts. In: Johnson-Matthey Symposium on Catalytic Technology, 2004-03-242004-03-26.

Dawson, Richard and Kelsall, Geoff (2005) Electrochemical recovery of precious metals from spent alumina-supported catalysts. In: Johnson Matthey Symposium on Catalytic Technology, 2005-04-052005-04-07.

Dawson, Richard and Kelsall, Geoff (2004) Recovery of metal ions from dilute solutions using a spouted bed cathode. In: Electrochem 2004, 2004-09-132004-09-15.

Dawson, Richard and Kelsall, Geoff (2004) Recovery of platinum group metals for spent alumina supported catalysts. In: Mini-waste II, 2004-11-092004-11-10.

Dawson, Richard and Kelsall, Geoff (2005) Recovery of platinum group metals for spent alumina supported catalysts. In: Mini-Waste III, Transferring the Knowledge; Delivering the Benefits, 2005-12-052005-12-06.

Dawson, Richard and Kelsall, Geoff (2005) Recovery of platinum group metals for spent alumina supported catalysts. In: 7th European Symposium in Electrochemical Engineering. , pp. 449-454.

De Venuto, D. and Compagne, E. and Richardson, Andrew M. D. (2003) Investigations into testability improvements on a 16 bit audio sigma-delta ADC through the use of on-chip techniques. In: Proceedings of IMSTW 2003. .

Deloughry, R. and Davenport, I. and Ma, X. and Ponnapalli, P. V. S. (2003) Development of a virtual instrument system for industrial process tomography. In: 3rd World Congress on Industrial Process Tomography, 2003-09-022003-09-05.

Di Carlo , Aldo (2009) High frequency triode-type field emission device and process for manufacturing the same. WO 2009/084054.

Dickinson, S. J. and Peyton, A. J. (2001) A high speed, multi-frequency impedance analysing node. In: Proceedings of the 2nd world congress on industrial process tomography. , pp. 502-510.

Dickinson, Stephen J. (2003) Unified aggregate component modelling of dynamic mechatronic systems using bond graphs. In: Proceedings of the EEUG workshop. , pp. 6-12.

Dickinson, Stephen J. (2004) Unified aggregate component modelling of dynamic mechatronic systems using bond graphs. International Journal of Electrical Engineering Education, 41 (4). pp. 329-340. ISSN 0020-7209

Dickinson, Stephen J. and Binns, R. and Peyton, A. J. and Yin, W. (2003) Depth profile scanning of cylindrical bar and wire using a spectroscopic direct current injection technique. In: Proceedings of the 3rd world congress on industrial process tomography. , pp. 39-44.

Dickinson, Stephen J. and Peyton, A. J. (2003) Multi-frequency current injection model inversion for determining coating thickness and electromagnetic material properties of cylindrical metal bar or wire. In: Proceedings of the IOP conference – sensors and their applications XII. , pp. 135-140.

Ding, L. and Bradshaw, A. and Taylor, C. James (2004) Robustness comparison of control systems for a nuclear power plant. In: Proceedings of the UKACC international conference on control. .

Dixon, R. and Taylor, C. James and Shaban, E. M. (2005) Comparison of classical and modern control applied to an excavator-arm. In: International Federation of Automatic Control 16th Triennial World Congress. .

Dorey, A. P. and Bradley, D. A. (1992) Integrating electronics with mechanical engineering. In: 6th conference on teaching electronic engineering in degree courses. University of Hull, 28.1-28.8.

Dotchev, K. D. and Chaplin, R. V. (1994) Simulation of a vehicle traction control system at the conceptual stage. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton, pp. 467-473.

da Silva, J. C. and Bennett, D. and Counsell, J. M. (1997) Computational agent to integrate expert system and simulation language. In: Proceedings of the 9th European simulation symposium. , Germany.

da Silva, J. C. and Dawson, D. (1998) Expert system for design validation and expandability issues. In: Proceedings of the computer aided conceptual design conference ’98. , Windermere, pp. 25-48.

E

Eghlio, R. M. and Pinkerton, A. J. and Li, L. (2012) Characterization of weld bead geometry in fibre laser butt welding of mild steel sheets by means of statistical modelling. Lasers in Engineering, 22 (5-6). pp. 281-298. ISSN 0898-1507

El-zaroug, Omar and Forth, John and Ye, Jianqiao and Beeby, Andrew (2006) Flexural performance of concrete slabs reinforced with GFRP and subjected to different thermal histories. In: 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures. University of Patras, Patras, Greece.

Enright, R. and Martin, I. and Honary, B. and Darnell, M. (1994) DSP based long range radio system. In: Proceedings of the third UK/Australian international symposium on DSP for communications systems. , Warwick, pp. 87-92.

Exadaktylos, V. and Silva, M. and Aerts, J.-M. and Taylor, C. James and Ferrari, S. and Guarino, M. and Berckmans, D. (2007) Frequency analysis for real-time identification of sick pigs and disease monitoring in pig houses. In: Precision livestock farming '07. Wageningen Academic Publishers, Wageningen, pp. 125-131. ISBN 978-90-8686-023-4

Exadaktylos, V. and Silva, M. and Aerts, J.-M. and Taylor, C. James and Ferrari, S. and Guarino, M. and Berckmans, D. (2007) Online recognition and localisation of sick pig cough sounds. In: 13th International Congress in Animal Hygiene, 2007-06-172007-06-21.

Exadaktylos, V. and Taylor, C. James and Chotai, Arun (2008) Constraint handling for state dependent parameter models. In: Proceedings of the UKACC International Conference on Control. .

F

FORTI, R L and RUSSO, P and BARTOLUCCI, G and LEUZZI, G and PAOLONI, C and RUGGIERI, M (1988) Satellite active antennas for fixed services at Ku-Band. Alta Frequenza, 57 (10). pp. 567-574. ISSN 0002-6557

Fan, P. Z. and Darnell, M. and Honary, B. (1993) Orthogonal complementary pairs of sequences. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 118-121.

Fan, P. Z. and Darnell, M. and Honary, B. (1994) Polyphase sequences with good periodic and aperiodic autocorrelations. In: Proceedings of the 1994 international symposium on information theory. IEEE Service Centre, p. 74.

Findlay, J. D. and Seward, D. W. and Mure, J. N. and Scott, J. (1998) Developments in the piling process through advances in technology. In: The value of geotechnics in construction. Institution of Civil Engineers, London. ISBN 1860812511.

French, M. J. (1992) Design insight and technical confidence. International Journal of Mechanical Engineering Education, 20 (2). pp. 113-118. ISSN 2050-4586

French, M. J. (1992) Design principles. In: Royal Academy of Engineering conference. Sheffield University.

French, M. J. (1994) Invention and evolution : design in nature and engineering, 2nd ed. Cambridge University Press. ISBN 0521469112

French, M. J. (1997) Prospects for progress in mechanical design. In: Proceedings of the plenary opening lecture at ASME '97: design engineering technical conferences. , Sacramento.

French, M. J. (1996) Systematic design of an extensible membrane for LNG carrier tanks. In: Proceedings of the 6th international offshore and polar engineering conference (ISOPE). International Society of Offshore and Polar Engineers, pp. 529-532. ISBN 1880653222.

French, M. J. and Ataer, O. E. (1992) Energy analysis of bouble-efect absorption refrigerator system. In: 2nd international colloquium on refrigeration. , Aduna.

French, M. J. and Bracewell, R. H. (1996) The systematic design of economic wave energy converters. In: Proceedings of the 6th international offshore and polar engineering conference (ISOPE). International Society of Offshore and Polar Engineers, pp. 106-109. ISBN 1880653222.

French, M. J. and Chaplin, R. V. and Langdon, P. M. (1993) A creativity aid for designers. In: Proceedings of ICED '93. Heurista, Zurich.

French, M. J. and Ramirez, A. (1996) Towards a comparative study of quarter-turn pneumatic valve operators. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 210. pp. 543-552. ISSN 2041-2975

French, M. J. and Widden, M. B. (1993) Function-costing: a promising aid to early cost estimation. In: Proceedings of conference on design for manufacturability DE-Vol. 52. ASME, Chicago, pp. 85-90.

G

GIANNINI, F and PAOLONI, C (1988) Modeling of shunt connected single radial stub for CAD applications. Alta Frequenza, 57 (5). pp. 227-232. ISSN 0002-6557

GIANNINI, F and PAOLONI, C and ORENGO, G (1992) Wide band high-gain optical preamplifier. In: Emerging Optoelectronic Technologies: Proceedings of the Conference on Emerging Optoelectronic Technologies Bangalore, India December 16-20, 1991. SPIE - INT SOC OPTICAL ENGINEERING, Bellingham, Wash., pp. 168-172. ISBN 0-8194-0762-3

Gallaher, M. and Bennett, S. A. and Darnell, M. and Honary, B. (1994) Advanced radio system architectures to integrate network and frequency management. In: Proceedings of the sixth international conference on HF radio systems and techniques. IEE, London, pp. 310-315.

Gamage , Kelum (2010) Improvements in and relating to gamma ray and neutron detection. GB1016806.0.

Ganah, A. A. and Kamara, J. M. and Aurigi, A. (2005) A framework for assessing the impact of ICT on architectural design. In: Proceedings of the 3rd International Conference on Innovation in Architecture, Engineering and Construction. , pp. 407-416.

Geng, R. L. and Belomestnykh, S. and Padamsee, H. and Reilly, J. and Goudket, P. and Dykes, D. M. and Carter, Richard G. (2002) Multipacting induced breakdown in rectangular waveguide couplers. In: Proceedings of the workshop on superconducting RF. .

Georgopoulos, K. and Burbidge, M. and Lechner, A. and Richardson, Andrew M. D. (2005) Investigation into the Use of Alternative Transformation Techniques for High-Resolution A/D Converter Testing. In: Proceedings of the IEEE Mixed Signal Test Workshop. .

Georgopoulos, Konstantinos (2005) Novel test solutions for dynamic performance parameter testing of high-resolution converters. In: Proceedings of the DATE workshop on Test of High-Resolution Mixed-Signal Interfaces. .

Ghavipanjeh, F. and Taylor, C. J. and Chotai, A. and Young, P. C. (2000) Modelling and PIP control of dissolved oxygen in a wastewater treatment benchmark system. In: Proceedings of the UKACC international conference on control 2000. .

Ghavipanjeh, F. and Taylor, C. J. and Young, P. C. and Chotai, A. (2000) Data-based modelling and proportional integral plus (PIP) control of nitrate in an activated sludge benchmark. In: Proceedings of Aquatech: conference on wastewater and EU nutrient guidelines. , Amsterdam.

Ghosh, T. K. and Srivastava, A. and Agarwal, P. and Maurya, S. and Srivastava, V. and Carter, Richard G. (2004) A secondary electron emission model for multistage collectors. In: Proceedings of the displays and vacuum electronics conference. , pp. 389-394.

Goudket, P. and Bellantoni, L. and Edwards, H. and Foley, M. and Khabiboulline, T. and Mitchell, D. and Rowe, N. and Solyak, N. and Burt, G. and Dexter, A. and Koeth, T. and Adolphsen, C. (2006) Status of 3.9 GHz defelecting mode (crab) cavity R&D. In: Proceedings of the LINAC 2006 conference. .

Grayson, M. and Darnell, M. and Honary, B. (1992) An adaptive symbol synchronization algorithm suited to DSP implementation. In: First international symposium on DSP for communication systems. University of Warwick, Warwick, pp. 60-62.

Green, Sarah and Attar, F. G. and Bhattacharya, R. and Port, A. (2007) Cement pressurisation in flanged and unflanged acetabular cups. In: Proceedings 8th EFORT Congress, Florence, Italy. European Federation of National Associations of Orthopaedics and Traumatology, Florence, Italy, P486.

Green, Sarah and Boampong, D. K. and Unsworth, A. (2002) Ion beam modification of Ti6Al4V alloy for TJR. In: 17th European Conference on Biomaterials, 2002-09-102002-09-14.

Green, Sarah and Chuter, G. S. J. and Cloke, D. J. and Mohamed, A. and Partington, P. F. (2007) Wear analysis of failed acetabular polyethylene: A comparison of analytical methods. In: Proceedings 8th EFORT Congress, Florence. European Federation of National Associations of Orthopaedics and Traumatology, Florence, Italy.

Green, Sarah and Elfick, A. P. and Birch, M. A. and McCaskie, A. W. (2002) On the influence of protein adsorption to phagocytosis of model polyethylene particles. In: International conference engineers & surgeons - joined at the hip. Institution of Mechanical Engineers, London, L27.

Green, Sarah and Elfick, A. P. and Frostick, S. P. and Unsworth, A. (2002) The morphology of UHMWPE wear debris released from shoulder prostheses. In: 17th European Conference on Biomaterials, 2002-09-102002-09-14.

Green, Sarah and Elfick, A. P. and Unsworth, A. (2002) AFM measurement of nanoscale topographical and material wear features. In: International conference engineers & surgeons - joined at the hip. Institution of Mechanical Engineers, London, C601/032.

Green, Sarah and Elfick, A. P. and Unsworth, A. (2001) The absence of nanometre sized UHMWPE wear particles retrieved from ex-vivo tissue. In: Trans 4th Combined meeting Orthopaedic Research Societies of the USA, Europe Canada and Japan. Orthopaedic research society, Chicago, Ill., p. 93.

Green, Sarah and Elfick, Alistair P. D. and Liu, C. (2001) How size affects the mobility of THR wear debris. In: European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001. European Society for Biomaterials, London, T41.

Green, Sarah and Grant, D. M. and Wood, J. V. (1995) Surface performance of a Ni-Ti shape memory alloy. In: Proceedings of SMST-94 : the First International Conference on Shape Memory and Superelastic Technologies, March 7-10, 1994, Asilomar Conference Center, Pacific Grove, California. Published under the aegis of the Organizing Committee of SMST-94, Monterey, Calif., pp. 91-96. ISBN 0-9645943-0-7

Green, Sarah and Grant, D.M. and Wood, J. V. (2000) Cytomcompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay. In: Processing and fabrication of advanced materials VIII : proceedings of a symposium ... September 8-10, 1999, Mandarin Hotel, Orchard Road, Singapore. World Scientific Publishing, Singapore, pp. 141-148. ISBN 981-02-4575-0

Green, Sarah and Gregg, P. and Liu, C. and Watkins, N. D. and McCaskie, A. W. (2002) Migration of a cemented hip joint prosthesis within a novel composite femur. In: International conference engineers & surgeons - joined at the hip. Institution of Mechanical Engineers, London, C601.

Green, Sarah and Kadakia, A. and Partington, P. F. (2007) Fixation strength of cemented Birmingham (HA coated, cementless) cups - a biomechanical study. In: Proceedings 8th EFORT congress, Florence, Italy. European Federation of National Associations of Orthopaedics and Traumatology.

Green, Sarah and Lee, S. and Joyce, T. and Unsworth, A. (2006) Design and development of a novel multistation MTP joint simulator for in vitro testing. In: Proceedings 20th European Society of Biomaterials Conference, 2006-08-272006-09-01.

Green, Sarah and Lee, S. and Joyce, T. and Unsworth, A. (2006) Wear performance of silastic prostheses tested on a novel metatarsophalangeal joint simulator. In: Bath Biomechanics Symposium 2006, 2006-09-18.

Green, Sarah and Liu, C. and Watkins, N. D. and Gregg, P. J. and McCaskie, A. W. (2001) Compression failure mode of two CMW bone cements. In: European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001. European Society for Biomaterials, London, P51.

Green, Sarah and Liu, C. and Watkins, N. D. and Gregg, P. J. and McCaskie, A. W. (2000) The dependence of recovery behaviour on mechanical properties of bone cement. In: PIMS 2000 : 9th International Conference on Polymers in Medicine & Surgery, 11 - 13 September 2000, Danube University, Krems, Austria. IOM communications, London, p. 89. ISBN 9781861251268

Green, Sarah and Liu, C. and Watkins, N. D. and McCaskie, A. W. (2000) Comparative analysis of bone cement fracture surfaces. In: 11th International Conference on Deformation, Yield and Fracture of Polymers : 10 - 13 April 2000, Churchill College, Cambridge, UK. IOM communications, Cambridge, pp. 325-328. ISBN 1-86125-120-3

Green, Sarah and Liu, C. and Watkins, N. D. and McCaskie, A. W. and Gregg, P. J. (2002) Restrained creep of CMW2000 Bone Cement. In: 17th European Conference on Biomaterials, 2002-09-102002-09-14.

Green, Sarah and Mahomed, A. and Cloke, D. J. and Chuter, G. S. J. and Partington, P. F. (2006) Wear evaluation of retrieved, failed uncemented UHMWPE prostheses. In: Proceedings 20th European Society of Biomaterials Conference, 2006-08-272006-09-01.

Green, Sarah and Meyer, JRF (2010) Motivation of engineering students-considerations for programme design. In: Engineering Education 2010, 2010-07-062010-07-08.

Green, Sarah and OMeara, N and Rennie, Allan (2011) Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems. In: VRAP 5 Advances in Virtual and Rapid Prototyping, 2010-09-182010-09-24.

Green, Sarah and Scholes, S. C. and Unsworth, A. (2002) Nanoscale wear degradation of alumina femoral head bearing surfaces assessed using an atomic force microscope. In: International conference engineers & surgeons - joined at the hip. Institution of Mechanical Engineers, London, C601/036.

Grout, I. and Murphy, J. and Burbidge, M. and Bell, G. and Manners, A. (2005) Development of a remote access facility for a PLL test course. In: Proceedings of the remote experimentation and virtual instrumentation symposium. .

Grout, I. A. and Burge, S. E. and Dorey, A. P. (1994) ASICs for monitoring and controlling electric motors. In: Application Specific Integrated Circuits for Measurement Systems, IEE Colloquium on. IET Press, 10/1-10/4.

Grout, I. A. and Burge, S. E. and Dorey, A. P. (1994) Application specific integrated circuit processors for discrete-time control. In: Proceedings of the Irish DSP and control colloquium. , Dubai, pp. 277-282.

Gu, J. and Taylor, C. James and Seward, Derek W. (2004) PIP-gain scheduling control of an intelligent excavator. In: Proceedings of the 21st international symposium on automation and robotics in construction. , pp. 280-285.

Gunn, K. and Taylor, C. James (2008) Genetic algorithms for the development and optimisation of wave energy converter control systems. In: 23rd European Institute for Applied Research Workshop on Advanced Control and Diagnosis, 1900-01-01.

Gunn, K. and Taylor, C. James and Lingwood, C. (2009) Evolutionary algorithms for the development and optimisation of wave energy converter control systems. In: 8th European Wave and Tidal Energy Conference. .

Gunn, Kester and Lingwood, Chris and Taylor, C. James (2010) Multi-objective evolutionary optimisation of the geometry of a class of controlled wave energy converter. In: UKACC International Conference Control 2010. , pp. 349-354. ISBN 978-184600-0386

H

Hambali, Ruzy Haryati and Rennie, Allan and McGovern, Jim (2012) Physical Analysis of Maximum Strength of Additive Manufactured Parts: A Case-Based Study. In: 2nd International Conference on Arts, Social Sciences & Technology. , Penang, Malaysia. ISBN 978-983-44499-1-9

Hambali, Ruzy Haryati and Vaudelin, Maeva and Rennie, Allan (2012) Optimisation of Build Orientation for FDM Additive Manufactured Products. In: International Conference on Applications and Design in Mechanical Engineering (ICADME 2012). School of Mechatronic Engineering, UniMAP, Perlis, Malaysia. ISBN 978-967-5760-08-2

Hannaford, C. D. (1995) Coding for both protection and synchronisation. In: Proceedings of the third international symposium on communications theory and applications. IEE, Ambleside, pp. 48-52.

Hargreaves, J. K. and Burns, C. J. (1994) Effects of the ionosphere on the performance of space-based radar at high altitude. Working Paper. Lancaster University.

Harvey, Russell and Richardson, A. M. D. and Baker, K. and Bruls, E. (1994) Analogue Fault Simulation Based on Layout-Dependent Fault Models. In: Proceedings of the IEEE International Test Conference on TEST: The Next 25 Years. IEEE Computer Society, Washington, DC, USA, pp. 641-649. ISBN 0-7803-2103-0.

Hasan, Saad and Rennie, Allan (2008) A Comprehensive Business Model for Rapid Manufactured Products. In: 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. DAAAM International, Vienna, pp. 591-592. ISBN 978-3-901509-68-1

He, D. and Honary, B. and Thomas, R. (1992) Real-time frequency companding using digital signal processor. In: First international symposium on DSP for communication systems. University of Warwick, pp. 117-118.

Hemami, A. and Seward, D. W. and Quayle, S. (1999) Some experimental force analysis for automation of excavation by a backhoe excavator. In: Proceedings of the 16th IAARC/IFAC/IEEE international symposium on automation and robotics in construction. , Madrid, pp. 503-508.

Heudorfer, B. and Dawson, D. (1994) A 'smart' tool mounting system to enable the robotic deflashing of moulded products in flexible material. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton, pp. 379-384.

Higson, S. R. and Drake, P. and Stamp, D. W. and Peyton, A. J. and Binns, R. and Lyons, A. and Lionheart, W. R. B. (2002) Development of a sensor for visualisation of steel flow in the continuous casting nozzle. In: Proceedings of the 21st international ATS steelmaking conference. .

Hillmann, Mark and Li, Ming and Quayle, Stephen (2011) Numerical and experimental investigation of a novel breakwater combining coastal defence and energy generation for near shore environment. In: 9th European Wave and Tidal Energy Conference, 2011-09-042011-09-09.

Holland, I. and Bradshaw, I. (1996) Identification and control of a novel hybrid microwave and radiant furnace. In: Proceedings of the 5th UK mechatronics forum international conference. .

Honary, B. (1994) Code assisted frame and symbol synchronisation. In: Proceedings of the 2nd international symposium: DSP for communication systems. , Adelaide.

Honary, B. and Bahrami, M. and Darnell, M. (1992) Combined Huffman and trellis decoders for data transmission. In: IEE international conference on data transmission - Advances in Modem and ISDN Technology and Applications. , London, pp. 47-55.

Honary, B. and Darnell, M. (1994) Extraction and application of channel state data in digital communications schemes. In: Communications theory and applications II. .

Honary, B. and Darnell, M. and Markarian, G. S. and Ng, T. (1992) Coding for spectrum management. In: IEE eighth international conference on electromagnetic compatibility. , Edinburgh, pp. 336-339.

Honary, B. and Darnell, M. and Vongas, G. (1994) Adaptive coding for 2-200MHz multiple-mechanism radio paths. In: Proceedings of the sixth international conference on HF radio systems and techniques. IEE, London, pp. 364-370.

Honary, B. and Darnell, M. and Vongas, G. (1994) Adaptive error control schemes for 2-200MHz. In: Proceedings of the AGARD-CP 543 conference. , 5.1-6.

Honary, B. and Darnell, M. and Vongas, G. (1993) Adaptive error control schemes for MMPPs. In: Proceedings of the 53rd AGARD-EPP symposium on multiple mechanism propagation paths. , Rotterdam.

Honary, B. and Edgar, J. (1994) Low complexity implementation of modified McEliece algorithms. In: Proceedings of the IEE colloquium on security and cryptography applications to radio systems. , London, 12/1-2.

Honary, B. and Horley, N. J. (1992) A semi-orthogonal M-ARY FSK system. In: 4th Bangor communications symposium. University of Wales, Bangor, pp. 127-133.

Honary, B. and Hunt, B. and Maundrell, M. (1994) Improving automatic link establishment through new soft decision trellis decoder for the (42,12) Golay code. In: Proceedings of the sixth international conference on HF radio systems and techniques. IEE, London, pp. 182-185.

Honary, B. and Markarian, G. S. (1994) Array decomposition of the Reed-Solomon codes. In: Communications: the global bridge. IEEE, London.

Honary, B. and Markarian, G. S. (1993) Minimal trellises of Q-ary (Q>2) linear block codes. In: Proceedings of the fourth IMA international conference on cryptography and coding. , Cirencester.

Honary, B. and Markarian, G. S. (1993) RLL/FEC design based on generalised array codes. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 227-228.

Honary, B. and Markarian, G. S. (1993) Trellis decoding for block codes. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 224-226.

Honary, B. and Markarian, G. S. and Darnell, M. (1994) Novel nested trellis decoding technique for linear block codes. In: Communications: the global bridge. , pp. 31-35.

Honary, B. and Markarian, G. S. and Darnell, M. (1994) Trellis decoding for block codes. In: Communications theory and applications II. , pp. 79-94.

Honary, B. and Markarian, G. S. and Darnell, M. and Kaya, L. (1993) Trellis decoding technique for array codes. In: Eurocode '92. Courses and lectures . , Wien, n/a. ISBN 9783211825198

Honary, B. and Markarian, G. S. and Naderi, M. (1994) RLL/FEC design based on generalised array codes. In: Communications theory and applications II. , pp. 94-107.

Honary, B. and Zolghadr, F. and Darnell, M. (1992) Improved HF modem using convolutional coding. Electronics and Communication Engineering Journal, 4 (2). pp. 73-82. ISSN 0954-0695

Honary, F. and Stocker, A. J. and Robinson, T. R. and Rietveld, M. T. and McCrea, I. W. (1997) Multi-diagnostic observations of heater-induced effects at pump frequencies close to the electron gyroharmonics. In: Proceedings of the 8th EISCAT international workshop. , Leicester.

Horley, N. and Honary, B. and Maundrel, M. and Vongas, G. (1992) RS codec for an MFSK transmission system. In: First international symposium on DSP for communication systems. University of Warwick, pp. 65-69.

Hunt, B. and Honary, B. (1993) Code assisted bit synchronisation for an MPSK modem. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 91-92.

I

Ibarra-Medina, J. and Pinkerton, A. J. (2010) The influence of powder stream shape and substrate position on mass addition in laser cladding. In: Proceedings of the 24th International Conference on Surface Modification Technologies. Valardocs. ISBN 978-81-910571-2-6

Ibarra-Medina, J. and Pinkerton, A. J. and Paul, C. P. (2009) Coaxial laser cladding gas flows and their effects. In: Proceedings of the 23rd International Conference on Surface Modification Technologies. Valardocs. ISBN 978-81-910570-0-2

Ibarra-Medina, Juansethi and Vogel, M. and Pinkerton, A.J. (2011) A CFD model of laser cladding: From deposition head to melt pool dynamics. In: Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 378-386.

J

Jacobson, D. and Bocking, C. and Rennie, Allan E. W. (2002) Injection mould tool manufacture in less than five days. Society of Manufacturing Engineers.

Jacobson, D.M and Bocking, C. E. and Rennie, Allan (2002) Injection Mould Tool Manufacture in Less Than Five Days. In: RAPRA Rapid Tooling Conference 2002. RAPRA, pp. 35-43. ISBN 978-1-85957-313-6

Jafri, A. and Green, S.M. and McCaskie, A.W. and Partington, P.F. and Muller, S.D. (2006) OPTIMAL PROSTHESIS TEMPERATURE IN CEMENTED TOTAL HIP ARTHROPLASTY. Journal of Bone and Joint Surgery, British Volume, 88-B (SUPP I). p. 365.

Jamaluddin, N. and Lam, D. and Ye, J. (2010) Experimental studies of elliptical concrete-filled tube columns. In: TUBULAR STRUCTURES XIII. CRC PRESS-TAYLOR & FRANCIS GROUP, BOCA RATON, pp. 333-340. ISBN 978-0-415-58473-9

Jamaluddin, N. and Lam, D. and Ye, J. (2009) Finite Element Analysis of Elliptical Stub CFT Columns. In: Steel Concrete Composite and Hybrid Structures. Research Publishing Services, Singapore, pp. 265-270. ISBN 978-981-08-3068-7

Jeffery, C. and Rosing, R. and Richardson, A. M. D. (2000) Applications of mixed signal test strategies to next generation microsystems. In: Design, modeling, and simulation in microelectronics. SPIE (Society of Photo-Optical Instrumentation Engineers), pp. 21-32. ISBN 0-8194-3900-2.

Jeffery, C. and Rosing, R. and Richardson, A. M. D. (2000) A built-in test solution for a SMART silicon micromachined resonant pressure sensor. In: IEEE European Test Workshop. IEEE. ISBN 0-7695-0701-8.

Jeffrey, C. and Lechner, A. and Richardson, Andrew M. D. (2003) Online monitoring for automotive sub-systems using 1149.4. In: EPRINTS-BOOK-TITLE. .

Jeffrey, C. and Lechner, A. and Richardson, Andrew M. D. (2003) Re-using IEEE1149.4 as an infrastructure for online monitoring. In: Proceedings of the 9th IEEE international mixed signal test workshop (IMSTW03). , pp. 247-249.

Jenkins, R. O. and Carter, Richard G. (2001) Design of the pitch profile for high linearity helix TWT amplifiers. In: Proceedings of a conference on displays and vacuum electronics. .

Jenkins, R. O. and Carter, Richard G. (2001) Use of electron bunching diagrams for the design of pitch profiles in helix TWTs. In: Proceedings of IVEC ’2001. .

Joyce, M. (1997) How does boron stop neutrons? Third Millennium Magazine.

Joyce, M. (1997) The art (or science?) of creativity. Third Millennium Magazine.

Joyce, M. and Regan, P. (1997) Fusion finds the Midas touch. Daily Telegraph.

Joyce, M. and Regan, P. (1997) In the Alchemist's chair. Third Millennium Magazine.

Joyce, M. J. (1998) Silicon: a revolutionary ingredient. Third Millennium Magazine, 1 (4).

Joyce, M. J. and Franklin, K. and Neale, P. J. and Kiffin, S. (1998) What stimulates the creative process? Journal of Design and Technology, 3. pp. 113-117.

Joyce, Malcolm J. (2008) ISOLUS Technical Options Study - Independent Peer Review Report. Working Paper. MOD.

Joyce, Malcolm J. (2010) Real-time digital neutron/γ discrimination in non-flammable fast scintillators. In: NPL Neutron Users Club meeting, 2010-10-01.

Joyce , Malcolm J. (2009) Position and orientation detector. GB2451890 (A).

Joyce , Malcolm J. (2000) Chemical Sensor. GB 9719946.7, 6.

Joyce, T.J. and Monk, D. and Thompson, P. and Chiu, P. and Unsworth, A. and Green, S.M. (2006) ORTHOPAEDIC BIOPOLYMER WEAR SCREENING RIG VALIDATED AGAINST CLINICAL DATA. Journal of Bone and Joint Surgery, British Volume, 88-B (SUPP I). p. 377.

K

Kamara, A. M. and Wang, W. and Marimuthu, S. and Pinkerton, A. J. and Li, L. (2010) Influence of melt pool convection on residual stress induced in laser cladding and powder deposition. In: Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America.

Kaufman, John and Rennie, Allan and Quayle, Stephen (2011) Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs. In: Rapid Design, Prototyping and Manufacturing. CRDM Ltd, pp. 135-143. ISBN 978-0-9566643-1-0

Kemp, Roger (2007) Benchmarking Transport Energy Consumption. .

Kemp, Roger (2003) Protecting the Railways: the Management of Safety in a Fragmented Industry. Ingenia, 16. pp. 35-39. ISSN 1472-9768

Kemp, Roger (2006) Regulating incalculable risks : the link between risk measurement and risk regulation. In: Proceedings of the EPSRC network conference on risk perception and assessment in design. .

Kemp, Roger J. (2005) Will the lights go out? In: Summary of the proceedings of 1-day conference on UK energy policy. .

Khan, E. and Shaukat, S. F. and Monk, S. D. (2009) Monte Carlo GPS based Solution for speed limit indicator. World Applied Sciences Journal, 6 (12). pp. 1691-1697. ISSN 1818-4952

Khan, M. and Vogel, M. and Ibarra-Medina, J. and Pinkerton, A. J. and N'Dri, N. and Megahed, M. (2012) Analysis and simulation of the effects of melt pool flow during laser deposition of a multiphase material. In: Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, Paper P133.

Kobayashi, H. and Ishikawa, K. and Turvey, G. J. (1994) On bending of rhombic plates. In: Proceedings of the annual conference of Japanese society of civil engineers. .

Koltsov, Denis (2006) Nanoeducation matters. Times (Nanotechnology Supplement).

Koltsov, Denis (2006) Nanometer magnets. In: McGraw-Hill yearbook of science and technology. McGraw-Hill, pp. 205-208.

Koltsov , Denis (2005) Product Packaging. .

Koltsov, Denis and Richardson, Andrew (2006) Initial background search on piezoelectric weight measurement used in urimeter application. Working Paper. .

Koltsov, Denis and Sofield, C. and Harker, A. (2006) Stanelco plc : Eight technical reports (commercial in confidence). . (Unpublished)

Kontoroupis, P. and Young, P. C. and Chotai, Arun and Taylor, C. James (2003) State dependent parameter – proportional integral plus (SDP-PIP) control of non-linear systems. In: Proceedings of the 16th international conference on systems engineering (ICSE2003). , pp. 373-378.

Kotsialos, A. and Ellouni, N. and Middelham, F. and van Schuppen, J. and Taylor, C. James (1998) DACCORD: integrated and co-ordinated control. In: 8th World Conference on Transportation Research. Pergamon. ISBN 0-08-043590-4

Kumar, L. and Carter, R. G. (1996) 3-D simulation of a soft-landing tilted electric field collector for linear beam tubes. In: Proceedings of the Asia-Pacific microwave conference. , New Delhi.

Kumar, L. and Carter, R. G. (1994) Tilted electric field collector. In: Proceedings of the 4th international conference on charged particle optics. , Japan.

L

Lam, D. and Ye, J. Q. and Fu, F. (2006) Finite element modelung of semi-rigid composite joints with precast hollow core slabs. In: 8th International Conference on Steel-Concrete Composite and Hybrid Structures, Proceedings. HARBIN INSTITUTE TECHNOLOGY PUBLISHERS, Harbin, China, pp. 426-433.

Lam, Dennis and Dai, Xianhe and Ye, Jianqiao and Jamaluddin, Norwati (2011) Finite Element Modelling of Slender Concrete Filled Elliptical Steel Columns. In: EUROSTEEL 2011, Budapest, Hungary. .

Lam, Dennis and Qureshi, Jawed and Ye, Jianqiao (2011) Effects of Shear Connector's Position in Profiled Sheeting on Strength and Ductility. In: 5th International Conference on Steel & Composite Structures, Seoul, Korea. .

Lane, S. J. and Mackin, R. O. and Binley, A. M. and Pinkerton, Harry and Peyton, A. J. (2001) Radar imaging of the natural environment. In: Proceedings of the 2nd world congress on industrial process tomography. , pp. 224-227.

Langdon, P. M. and Cheung, H. F. (1994) A hypertext documentation system for schemebuilder: the mechatronics book. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton, pp. 21-23.

Lechner, A. and Burbidge, M. J. and Richardson, Andrew M. D. and Hermes, B. (2001) 3DB challenge for DfT, DfM, DOT and BIST integration into analogue and mixed signal ICs. In: Proceedings of the 2nd Latin-American test workshop (LATW ’01). , pp. 194-199.

Lechner, A. and Richardson, A. M. D. and Hermes, B. and Perkins, A. (1998) Design for testability strategies for a high performance gain control circuit. In: Proceedings of the international IEEE mixed signal test workshop. The Hague.

Lechner, A. and Richardson, Andrew M. D. and Hermes, B. (2001) Towards a better understanding of failure modes and test requirements of ADCs. In: Proceedings of a conference: automation and test in Europe (DATE ’01). , p. 803.

Lee, T. J. and Oh, K. S. V. (1993) Object-oriented programming for building design. Structural Engineering Review, 5 (2).

Leigh, P. and Taylor, C. James and Chotai, Arun and Young, P. C. and Vranken, E. (2003) Implementation of a combined fan and valve control design in a ventilation chamber. In: Proceedings of the 16th international conference on systems engineering (ICSE2003). , pp. 423-428.

Leigh, P. and Taylor, C. James and Price, L. and Chotai, Arun and Young, P. C. (2000) Modelling and proportional integral plus (PIP) control of ventilation rate in a fan test chamber. In: Proceedings of the 15th international conference on systems engineering. .

Leigh, P. and Young, Peter C. and Chotai, Arun and Price, L. and Taylor, C. James and Vranken, E. and Berckmans, D. (1999) Modelling and control of forced ventilation in agricultural livestock buildings. In: 5th International Congress of Biometeorology and Urban Climatology, 1900-01-01.

Leigh, P. A. and Aggidis, George A. and Howard, D. C. (2007) Investigation of barriers against the development of hydro power schemes in Northwest England. In: British Hydropower Association (BHA) Annual Conference 2007, Delivering the Next Generation, 2007-10-102007-10-11.

Leigh, S. and Sezer, K. and Li, L. and Pinkerton, A. J. and Grafton-Reed, C. and Cuttell, M. (2009) Oxide formation in acute laser percussion drilled holes in single crystal nickel superalloy. In: Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 719-728.

Letizia, Rosa and Obayya, Salah (2009) Dispersive Multiresolution Time Domain for High Second Harmonic Generation Efficiency in One-Dimensional Periodic Grating. In: .

Letizia, Rosa and Obayya, Salah (2008) Efficient Multiresolution Time Domain Analysis for Second Harmonic Generation Integrated Devices. In: .

Letizia, Rosa and Obayya, Salah (2008) Multiresolution Time Domain Scheme for Dispersive Second Harmonic Generation Integrated Devices. In: .

Letizia, Rosa and Obayya, Salah (2009) Multiresolution Time Domain of Dispersive High-index Contrast Grating for Second Harmonic Generation. In: .

Letizia, Rosa and Obayya, Salah (2008) New Design of Second Harmonic Generation Using Photonic Crystals. In: .

Letizia, Rosa and Obayya, Salah (2008) Novel Multiresolution Time Domain Analysis for Photonic Devices. In: .

Letizia, Rosa and Obayya, Salah and Abujnah, Nabeil (2009) Accurate Multiresolution Time Domain Analysis of Microcavity Ring Resonator. In: .

Li, M. and Sharpe, John (1994) The use of function mapping in the design of mechatronic systems. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton, pp. 505-509.

Li, M. and Stokes, C. A. and French, M. J. and Widden, M. B. (1993) Function costing: recent developments. In: Proceedings of international conference on engineering design (ICED). Heurista, Zurich, pp. 1123-1129.

Lionheart , William R B (2008) Electromagnetic detection system. WO2008087385-A2; EP2108132-A2; GB2459790-A; CA2675587-A1; WO2008087385-A3; WO2008087385-A8; CN101688925-A; US2010207624-A.

Lupeanu, Mihaela and Brooks, Hadley and Rennie, Allan and Celik, Kursat and Neagu, Corneliu and Akinci, Ibrahim (2012) Design for Manufacture using Functional Analysis and CAD Mould Simulation for Rapid Prototyping and Rapid Tooling:Paper: ESDA2012-82410. In: ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012). American Society of Mechanical Engineers (ASME), Nantes. ISBN 978-0-7918-4486-1

Lupeanu, Mihaela and Brooks, Hadley and Rennie, Allan and Hill, Dave and Neagu, Corneliu (2012) Function Based Design for Rapid Prototyping: A Medical Industry Application for an Ocular Speculum. In: 13th Rapid Design, Prototyping & Manufacturing Conference. CRDM Ltd, High Wycombe, pp. 45-53. ISBN 978-0-9566643-2-7

Lupeanu, Mihaela and Neagu, Corneliu and Opran, Constantin and Rennie, Allan (2012) Functional analysis for the development of bio-medical products. In: Advanced Composite Materials Engineering (COMAT2012), 2012-10-182012-10-20.

Lupeanu, Mihaela and Rennie, Allan and Neagu, Corneliu and Celik, Kursat (2011) Product Optimization by Rapid Manufacturing and Targeted Functional Analysis. In: 16th European Forum on Rapid Prototyping and Manufacturing. . ISBN 9782748364651

Lyon, G. M. and Peyton, A. J. (1997) Development of a modular data acquisition system for electrical tomography. In: Proceedings of the conference on frontiers in industrial process tomography II. , The Netherlands.

M

Ma, X. (2010) Performance evaluation of Zeolite Rankine cycle systems using scroll expander for combined heat and electricity generation. Working Paper. . (Unpublished)

Ma, X. and Peyton, A. J. and Higson, S. R. and Drake, P. (2007) Developments of multiple frequency electromagnetic induction system for steel flow visualization. In: 5th World Congress on Industrial Process Tomography, 2007-09-032007-09-06.

Ma, X. and Peyton, A. J. and Lionheart, W. R. B. (2007) Feasibility study for tomographic walk-through metal detector. Working Paper. Unpublished. (Unpublished)

Ma, X. and Taylor, C. James and Joyce, M. J. (2009) An interactive PC-based electrical power system simulator for engineering education. In: 5th International CDIO Conference: Reframing Engineering Education: Impact and Future Direction, 2009-06-01.

Magatin, Roman and Ye, Jianqiao and Jin, Zhongmin (2009) Coefficients for Theory of Adaptive Elasticity and its use in the FEA of remodeling processes in biological tissues. In: 3rd International Conference on Mechanics of Biomaterials and Tissues. .

Mahmood, Khalid and Khan, Ashfaq and Pinkerton, A. J. (2011) Laser metal deposition of steel components using machining waste as build material. In: Proceedings of CLEO, the IEEE Conference on Lasers and Electro-Optics. IEEE, New York, -. ISBN 978-1-55752-910-7

Mahmood, Khalid and Pinkerton, A. J. and Syed, Waheed Ul Haq (2011) Laser surface cladding of Inconel 617 chips on mild steel. In: Proceedings of the 25th International Conference on Surface Modification Technologies. Valardocs. ISBN 978-81-910571-4-0

Mahmood, Khalid and Syed, W. U. H. and Pinkerton, A.J. (2010) Laser direct deposition of carbon steel machining waste. In: Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 1533-1540.

Margrave, F. W. and Seward, D. W. (1994) Establishing the safety argument for the use of programmable electronics in transport. In: Proceedings of the 27th ISATA conference: dedicated conferences on mechatronics and supercomputing applications in the transportation industries. Automotive Automation, Croydon, pp. 519-526.

Markarian , G. (2001) Recovery of the carrier signal from the modulated input signal. 6208201.

Markarian, G. S. and Honary, B. (1992) New CMI decoder for high-speed data transmission. In: First international symposium on DSP for communication systems. University of Warwick, pp. 103-104.

Markarian, G. S. and Honary, B. (1994) The Nordstrom-Robinson code is a (8,4) GAC over Z4. In: Proceedings of the third UK/Australian international symposium on DSP for communications systems. , Warwick, pp. 45-46.

Markarian, G. S. and Honary, B. (1994) Trellis decoding technique for block RLL/RCC codes. In: Proceedings of the 1994 international symposium on information theory. IEEE Service Centre, p. 147.

Markarian, G. S. and Honary, B. and Ali, F. (1992) Collaborative coding multiple access employing Manchester and CMI codes. In: 4th Bangor communications symposium. University of Wales, Bangor, pp. 120-123.

Markarian, G. S. and Honary, B. and Darnell, M. (1993) Code design for a specified power spectrum. In: Proceedings of the 5th Bangor communication symposium. , Bangor, pp. 72-76.

Markarian, G. S. and Honary, B. and Manukian, H. H. (1994) Signal-to-noise ratio measurement employing trellis decoders. In: Proceedings of the sixth international conference on HF radio systems and techniques. IEE, London, pp. 16-20.

Markarian, G. S. and Honary, B. and Soyjaudah, K. S. (1993) Trellis decoding of adaptive product codes. In: Proceedings of the 2nd international symposium on communication. , Ambleside, p. 96.

Markarian, G. S. and Kissaka, M. and King, D. and Nikogosian, K. (1994) The design of an integrated circuit to implement a new maximum likelihood decoding algorithm. In: DSP for communication systems I. , pp. 55-62.

Markarian, G. S. and Nikogosian, N. and Manukian, H. (1993) Maximum likelihood decoding algorithm adapted for line code used in fibre-optical communications. In: Communication theory and applications I : selected papers from the First International Symposium on Communication Theory and Applications, Crieff, Scotland,1991. Communications and signal processing series (1). HW Communications, Lancaster, pp. 229-238. ISBN 0901800252

McCabe, A. P. and Aggidis, George A. and Widden, M. B. (2009) A pilot study into the optimization of the shape of a wave energy collector by genetic algorithm. In: Proceedings of The 8th European Wave and Tidal Energy Conference, 2009-09-072009-09-10.

McCabe, A. P. and Stables, M. A. and Aggidis, George A. (2010) A Frequency-Response Design Method for the Control of Wave Energy Converters in Irregular Seas. In: 3rd International conference and exhibition on Ocean Energy, ICOE 2010, 2010-10-062010-10-08. (Unpublished)

McCabe, A. P. and Taylor, C. J. and Chotai, A. and Young, P. C. (2000) Proportional-integral-plus control of feedback-dependent systems with input and output constraints. In: Proceedings of the UKACC international conference on control 2000. University of Cambridge.

McCabe, A. P. and Young, P. C. and Chotai, A. and Taylor, C. James (2000) Proportional-integral-plus (PIP) control of non-linear systems. In: Proceedings of the 15th international conference on systems engineering. , pp. 407-412.

McCabe, Andrew P. and Aggidis, George A. and Stallard, T. J. (2006) Comparable performance characteristics from different test sites. In: Proceedings of the 4th EC co-ordination action on ocean energy workshop - performance monitoring of ocean energy systems (INETI). .

McCabe, Andy P. and Aggidis, George A. (2008) Optimum Mean Power Output of a Point Absorber Wave Energy Converter in Irregular Waves. In: UKERC Conference on ‘Sustainable Energy UK: Meeting the science and engineering challenge’, 2008-05-132008-05-14.

McCabe, Andy P. and Aggidis, George A. (2009) A preliminary study into optimising the shape of a wave energy collector using a genetic algorithm. In: The 1st International Conference on Sustainable Power Generation and Supply (SuperGen), 2009-04-01.

McCabe, Andy P. and Aggidis, George A. and Widden, Martin (2008) Some Aspects of Tuning Wave Energy Converters in Irregular Waves. In: Proceedings of the World Renewable Energy Conference, WREC 2008, 2008-07-192008-07-25.

McCabe, Andy P. and Yavuz, H. and Bradshaw, A. and Taylor, C. James and Aggidis, George A. (2006) Power optimisation for a 1-DOF surging WEC in regular seas with dynamically changing wave frequency. In: Proceedings of the SUPERGEN marine energy research consortium : work package 9 : wave power control. .

Meadowcroft, J. A. and Stallard, T. J. and Baker, N. J. and Aggidis, George A. (2006) Absorption of energy from irregular waves by a buoyant, surging body. In: Proceedings of the 16th international offshore and polar engineering conference (ISOPE). .

Meadowcroft, J. A. C. and Stallard, T. J. and Baker, N. J. (2005) Comparison of power capture in irregular waves and their regular wave components. In: Proceedings of the 6th European wave and tidal energy conference. .

Mottram, J. T. and Turvey, G. J. (1998) Semi-rigid behaviour of civil engineering structural connection. In: COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections. European Commission, Brussels/Luxembourg, p. 99.

Muir, E. H. M. and Bradshaw, A. (1994) Design of a controller for a high-performance fighter aircraft using robust inverse dynamics estimation. In: Proceedings of an IMechE conference: Aerotech'94. , Birmingham.

Mure, N. and Scott, J. N. and Seward, D. W. and Quayle, S. D. (1998) Integrating the business process with automation through object technology in a foundation company. In: Proceedings of ECPPM'98 - the Second European Conference on Product and Process Modelling in the Building Industry. BRE. ISBN 186081249X

Mure, N. and Scott, J. N. and Seward, D. W. and Quayle, S. D. and Clayton, C. R. I. and Rust, M. (2002) Just-in-time continuous flight auger piles using an instrumented auger. In: Proceedings of the 19th international symposium on automation and robotics in construction. .

N

Nagy, Z. and Bradshaw, A. (1998) Comparison of PI and PDF controls of a manipulator arm. In: Proceedings of the UKACC international conference on control ’98. , Swansea, pp. 739-744.

Nagy, Z. and Bradshaw, A. (1996) On development of a transputer based robot control system. In: Proceedings of the 5th international workshop on robotics in Alpe-Adria-Danube region. Hungarian Robotics Association, Budapest, pp. 125-130.

Nagy, Z. and Bradshaw, A. (1996) A flexible, transputer based robot control. In: Proceedings of the international workshop on advanced robotics and intelligent machines. , Manchester.

Nagy, Z. and Bradshaw, A. (1996) A transputer based, flexible, real-time control system for robotic manipulators. In: Proceedings of the UK UKACC international conference on control '96. , Exeter.

Neagu, Corneliu and Lupeanu, Mihaela and Rennie, Allan (2011) Geometry Optimisation of Tools used in Milling of Spherical Surfaces. In: SIM2011 - Sustainable Intelligent Manufacturing. , Leiria, Portugal, pp. 87-94. ISBN 9789898481030

Neal, R. A. (1999) Industry-based masters courses: a means to develop staff with a minimum of disruption. In: Proceedings of the 10th EAEEIE conference: educational innovations in electrical and information engineering. , Capri, pp. 259-261.

Ni, J. and Honary, B. (1993) System state-independent-unique-decodable CCMA codes. IEE Proceedings I (Communications, Speech and Vision), 140 (3). pp. 185-188. ISSN 0956-3776

Nisar, Salman and Li, L. and Sheikh, M. A. and Pinkerton, A.J. (2009) A comparison of cut path deviation with continuous and pulsed beam modes in diode laser chip-free cutting of glass. In: Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 1070-1079.

O

O'Brien, S. and Widden, M. B. (1992) The application of transputer control to a robotically-serviced manufacturing cell. Transputer Mailshot. pp. 23-30.

O'Hana, S. and Pinkerton, A. J. and Shoba, K. (2007) From art to engineering. In: Proceedings of the 21st International Conference on Surface Modification Technologies. ASM International. ISBN 978-0-9817065-0-4

Oh, K. S. V. and Langdon, P. M. (1993) Understanding the human/computer interactions in the design process. In: Proceedings of IMechE seminar on new product engineering data management. IMechE, London.

Oh, K. S. V. and Taleb-Bendiab, A. (1993) Speech-act based communication protocol to support multi-agent cooperative design systems. In: Proceedings of international conference on artificial intelligence in engineering '93. , Toulouse.

Olbrich, T. and Bradley, D. A. and Richardson, A. M. D. (1994) BIST and diagnostics for microsystems. In: Proceedings of the 7th ISATA conference: dedicated conferences on mechatronics and supercomputing applications in the transportation industries. Automotive Automation, Croydon, pp. 575-580.

Olbrich, T. and Bradley, D. A. and Richardson, A. M. D. (1994) Self-test and diagnostics for smart sensors in automotive applications. In: Proceedings of the IEE colloquium on automotive sensors. , 3/1-4.

Olbrich, T. and Grout, I. and Eben Aimine, Y. and Richardson, A. and Contensou, J. (1997) A new methodology for IC product quality estimation. In: Proceedings of the European design and test conference (ED&TC '97). IEEE Computer Society Press, Paris. ISBN 0818677864.

Olbrich, T. and Perez, J. and Grout, I. and Richardson, A. and Ferrer, C. (1996) Defect-oriented vs. chematic-level based fault simulation for mixed-signal ICs. In: Proceedings of the international test conference 1996. , Washington DC, pp. 511-520. ISBN 0780335406

Olbrich, T. and Richardson, A. M. D. and Bradley, D. A. (1994) BIST and diagnostics for safety critical microsystems. In: Proceedings of an ESREF conference. , Glasgow, pp. 511-518.

P

Pace, C. and Seward, D. (1998) Development of a safety manager for an autonomous mobile robot. In: Proceedings of the 29th international symposium on robotics 1998: advanced robotics beyond 2000. , Birmingham, pp. 277-282.

Palacin, R. and Kemp, Roger J. (2005) Living up to the myth by enhancing the sustainability of rail. In: Proceedings of the rail research UK (EPSRC) conference. .

Pamunuwa, Dinesh B. (2003) Modelling and analysis of interconnects for deep submicron systems-on-chip. Royal Institute of Technology. ISBN 91-7283-631-8

Pamunuwa, Dinesh B. and Zheng, Li-Rong and Tenhunen, Hannu (1999) Error-control coding to combat digital noise in interconnects for ULSI circuits. In: Proc. IEEE Norchip Conference Oslo 1999. IEEE, Norway, pp. 275-282.

Pamunuwa, Dinesh B. and Öberg, Johnny and Zheng, Li-Rong and Millberg, Mikael and Jantsch, Axel and Tenhunen, Hannu (2003) Layout, performance and power trade-offs in mesh-based network-on chip architectures. In: Proc. IFIP International Conference on VLSI Systems-on-chip. Technische Universität Darmstadt, Insitute of Microelectronic Systems, Darmstadt, Germany, pp. 362-366. ISBN 3-901882-17-0

Paoloni, C. and Di Carlo, A. and Brunetti, F. and Mineo, Mauro and Ulisse, G. and Durand, A.J. and Krozer, V. and Kotiranta, M. and Fiorello, A.M. and Dispenza, M. and Secchi, A. and Zhurbenko, V. and Boumrane, F. and Bouvet, T. and Megtert, S. and Cojocaru, C.-S. and Gohier, A. (2011) Backward Wave Amplifier Realisation at 1000 GHz Progress whitin EU FP7 OPTHER Project. In: 5th UK-China Workshop on Millimetre-Waves and Terahertz Technologies 2011. , Glasgow.

Paoloni, Claudio (2012) Accurate Backward-Wave Interaction Impedance Computation for Corrugated Rectangular Waveguides. In: 5th UK/Europe-China Workshop on Millimeter Waves and Terahertz Technologies. , China.

Paoloni, Claudio and Brunetti, Francesca and Riccitelli, Riccardo and Ulisse, Giacomo and Di Carlo, Aldo (2008) Simulations of field emission behaviour in carbon nanotubes based vacuum triode. In: .

Paoloni, Claudio and D'Agostino, Stefano (2004) Traveling Wave Tube helix compensation controlling the voltage at the cathode. In: Asian Pacific Microwave Conference 2004. , India.

Paoloni, Claudio and Di Carlo, Aldo (2012) Progetto OPTHER: OPtically Driven Terahertz Amplifiers. In: Fotonica 2012. , Italy.

Paoloni, Claudio and Di Carlo, Aldo and Brunetti, Francesca and Mineo, Mauro and Ulisse, Giacomo and Durand, Alain J. and Krozer, Viktor and Kotiranta, M. and Rossi, A and Dolfi, Daniel and Legagneux, Pierre and Fiorello, Anna Maria and Dispenza, Massimiliano and Secchi, Alberto and Zhurbenko, Vitaly and Megtert, Stephan and Boumrane, Fayçal and Bouvet, thomas and Cojocaru, C. -S. and Gohier, A. (2012) A European Project on Vacuum Tube Amplifiers for THz Amplification. In: 5th UK/Europe-China Workshop on Millimeter Waves and Terahertz Technologies. , China.

Paoloni, Claudio and Mineo, Mauro (2011) Vacuum Electron Tubes for THz Applications. In: Proceedings of the XXX General Assembly and Scientific Symposium of the International Union of Radio Science (Union Radio Scientifique Internationale-URSI. , Instanbul, Turkey.

Paoloni, Claudio and Mineo, Mauro and Krozer, Viktor and Di Carlo, Aldo and Brunetti, Francesca and Ulisse, Giacomo and Durand, A. and Kotiranta, M. and Fiorello, Anna Maria and Dispenza, Massimiliano and Secchi, A. and Zhurbenko, V. and Bouamrane, F. and Megtert, S. and Bouvet, Thomas and Tamburri, E. and Cojocarua, C. -S. and Gohier, A. (2011) Design and Fabrication of a 1 THz Backward Wave Amplifier. Terahertz Science and Technology, 4 (4). pp. 149-163.

Papaelias, M. P. and Davis, C. L. and Peyton, A. J. and Strangwood, M. and Binns, R. (2000) The use of electromagnetic sensors to monitor temperature during strip steel processing. In: Proceedings of the XVI panhellenic national conference in solid state physics. , Greece.

Papaelias, M. P. and Davis, C. L. and Strangwood, M. and Binns, R. and Peyton, A. J. (2001) Detection of phase transformation during steel processing using EM sensors. In: Proceedings of the 1st international seminar in progress in innovative manufacturing engineering (PRIME). .

Papaelias, M. P. and Davis, C. L. and Strangwood, M. and Binns, R. and Peyton, A. J. (2001) Effects of microstructural variability on the measurement of ferrite transformation using EM sensors. In: Proceedings of a materials research conference. .

Papaelias, M. P. and Davis, C. L. and Strangwood, M. and Binns, R. and Peyton, A. J. (2001) Measurement of the ferrite-austenite phase balance during transformation in steel using electromagnetic sensors. In: Proceedings of the XVIIth national panhellenic conference in solid state physics. .

Papaelias, M. P. H. and Davis, C. L. and Strangwood, M. and Binns, R. and Peyton, A. J. (2002) Electromagnetic sensors for monitoring phase transformations in steel – experimental results and modelling simulations. In: Proceedings of the TMS conference: modelling the performance of engineering structural materials III. .

Papaelias, M. P. H. and Davis, C. L. and Strangwood, M. and Binns, R. and Peyton, A. J. (2002) On-line detection of phase transformation and effects of microstructural variability in steel using electromagnetic sensors. In: Proceedings of the metallurgy and materials conference. .

Pates, W. and Aggidis, George A. and Panagopoulos, A. (2008) Growth Determinants of the Small Hydropower Sector. In: British Hydropower Association (BHA) Annual Conference 2008, Stepping into the Spotlight, 2008-09-172008-09-18.

Pattanasattayavong, P and Thomas, Stuart and Adamopoulos, George and Labram, John and Anthopoulos, Thomas (2011) Hybrid Phototransistors-based on Dye-functionalised ZnO Semiconducting Channels. In: MRS 2011 Spring Meeting, 2011-04-26.

Peyton, A. J. and Mackin, R. O. and Goss, D. and Crescenzo, E. and Tapp, H. S. (2002) The development of high frequency electromagnetic inductance tomography for low conductivity materials. In: Proceedings of the 2nd international symposium on process tomography. .

Peyton, A. J. and Mackin, R. O. and Goss, D. and Wan-Daud, W. A. and Crescenzo, E. and Saunders, N. H. and Tapp, H. S. (2003) Addressing the difficulties in using inductive methods to evaluating human body composition. Biométrie Humaine et Anthropologie, 21. pp. 69-77. ISSN 1279-7863

Peyton, A. J. and Mackin, R. O. and Goss, D. and Wan-Daud, W. A. and Crescenzo, E. and Saunders, N. H. and Tapp, H. S. (2002) Addressing the difficulties in using inductive methods to evaluating human body composition. In: Proceedings of the 9th symposium of the société de biométrie humaine. .

Peyton, A. J. and Tapp, H. S. and Ktistis, C. and Mackin, R. O. and Wan-Daud, W. A. and Goss, D. and Crescenzo, E. (2004) The development of a novel scanner to measure human composition. In: Proceedings of the XII international conference on electrical bio-impedance. .

Pham, M .H. and Peyton, A. J. (2004) A 3D BEM modelling of body-scanning MIT system. In: Proceedings of the XII international conference on electrical bio-impedance. .

Pinkerton, A J and Syed, W. U. H. and Li, L. (2006) An analytical model of the combined powder-wire deposition process. In: Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America.

Pinkerton, A. J. (2005) Alternative nozzle and metal delivery methods for laser-assisted metal deposition:(invited paper & presentation). In: Association of Industrial Laser Users Conference on Laser-assisted Metal Deposition, 2005-06-142005-06-16.

Pinkerton, A. J. (2010) Laser direct metal deposition:theory and applications in manufacturing and maintenance. In: Advances in laser materials processing. Woodhead Publishing Limited, Oxford. ISBN 9781845694746

Pinkerton, A. J. and Ahsan, M. Naveed and Paul, Christ P. and Kukreja, L. M. (2009) Porous surface structures by continuous and pulsed laser metal deposition for biomedical applications. In: Proceedings of the 23rd International Conference on Surface Modification Technologies. Valardocs.

Pinkerton, A. J. and Li, K. (2007) A method and model for pulsed laser cleaning of rapid manufactured parts. In: Proceedings of the 21st International Conference on Surface Modification Technologies. ASM International.

Pinkerton, A. J. and Li, L. (2002) Direct laser deposition layer profiles and the factors affecting them. In: Time Compression Technology (TCT) Conference, 2002-10-162002-10-17.

Pinkerton, A. J. and Li, L. (2003) Modelling the temperature effects of melt pool position and wall height in additive manufacturing by direct laser deposition. In: Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping. Escola Superior Tecnologia Gestao Leiria, Leiria, pp. 224-231.

Pinto, Domenico and Obayya, Salah (2005) Accurate finite element time domain modelling of resonant photonic bandgap cavities. In: International Workshop on the Theory and Numerical Modelling of Optical Waveguides, 2005-04-082005-04-09.

Pinto, Domenico and Obayya, Salah (2007) New Alternating-Direction-Implicit Finite-Difference-Time-Domain Method for Photonic Crystal Devices. In: International Computational Electromagnetic Time Domain (CEM-TD) Workshop, 2007-10-152007-10-17.

Pinto, Domenico and Obayya, Salah (2010) Novel Dual-Mesh Finite Volume Time Domain Method for the Analysis of Photonic Crystal Based Devices. In: Semiconductor and Integrated Optoelectronics, SIOE 2010, 2010-03-292010-03-31.

Pinto, Domenico and Obayya, Salah (2006) Time-domain modelling of nonlinear optical waveguides. In: International Workshop on Optical Waveguide Theory and Numerical Modelling, OWTNM’06, 2006-04-21.

Porter, I. (1998) Schemebuilder mechatronics. In: Proceedings of the engineering design conference ’98: design reuse. Brunel University, pp. 561-568.

Porter, I. and Bradshaw, A. and Counsell, J. M. and Nagy, Z. (2002) Integration of modelling and conceptual design applied to mechatronics. In: Proceedings of the mechatronics forum international conference (Mechatronics 2002). .

Porter, I. and Counsell, J. M. and Shao, J. (1998) Knowledge representation for mechatronic systems. In: Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design. , pp. 181-196.

Price, R. A. and Benson, C. and Joyce, Malcolm J. and Rogers, K. (2003) Development of a linear array for intracavatary in vivo dosimetry during external beam radiotherapy and brachytherapy. In: Proceedings of the nuclear science symposium, medical imaging conference: 13th international workshop on room temperature semiconductor X- and gamma-ray detectors. .

Price, R. A. and Kestell, D. J. and Stevens, D. L. and Jaksic, A. and Silvie, J. and Joyce, M. J. (2003) Novel developments in the MOSFET for neutron radiation dosimetry applications. In: Proceedings of the 9th neutron dosimetry symposium. .

Prieto, J. and Richardson, A. M. D. and Rueda, A. and Grout, I. (1998) An approach to realistic fault prediction and layout design for testability in analogue circuits. In: Proceedings of the conference on design, automation and test in Europe. , Paris, pp. 906-912.

Q

Qureshi, J. and Lam, D. and Ye, J. (2009) Behaviour of Headed Shear Stud in a Push Test using Profiled Steel Sheeting. In: Steel Concrete Composite and Hybrid Structures. Research Publishing Services, Singapore, pp. 737-744. ISBN 978-981-08-3068-7

Qureshi, Jawed and Lam, Dennis and Ye, Jianqiao (2011) Finite Element Modelling of Shear Connection Behaviour in a Push Test Using Profiled Steel Sheeting. In: 4th Int. Conf. Struct Eng. Mech. Comput. (SEMC 2010). .

R

Rahmati, M. T. and Aggidis, George A. (2008) A RANS Code for Low-Speed Axial Turbo machinery flow analysis. In: Proceedings of the International Conference on Computational Fluid Dynamics, CFD 2008, 2008-06-092008-06-10.

Rahmati, M. T. and Aggidis, George A. (2008) An inverse approach for blade shape design. In: Proceedings of the AFM 2008, the Seventh International Conference on Advances in Fluid Mechanics, 2008-05-212008-05-23.

Rahmati, M. T. and Aggidis, George A. and Chaplin, R. V. (2008) Investigating a Power-Absorber Wave Energy Converter. In: Proceedings of POWER 2008, ASME International Power 2008 Conference, 2008-07-222008-07-24.

Rahmati, M. T. and Aggidis, George A. and Zangeneh, M. (2008) An inverse approach for airfoil design. Advances in Fluid Mechanics, 59. pp. 35-44.

Rennie, Allan (2008) Consultancy and Support: Computer Aided Design & Engineering:(incorporating the Rapid Manufacturing North West & Sustainable Product Development sub-Projects) - Lancaster University Final Report. N/A. (Unpublished)

Rennie, Allan (2005) Virtual Prototyping. N/A.

Rennie, Allan (2006) Virtual Prototyping Phase II. N/A.

Rennie, Allan (2007) Virtual Prototyping Phase III. N/A. (Unpublished)

Rennie, Allan and Bennett, Graham R. (2000) Simulation and manufacture of wax toolfaces for the creation of silicone rubber tools using Magics™ RP software. International Journal of Engineering Simulation, 1 (3). pp. 24-30. ISSN 1468-1137

Rennie, Allan E. W. and Bocking, C. (2002) Electroforming for Injection Moulding. State of the Art Report - RAPTIA European Thematic Network.

Riccitelli, Riccardo and Paoloni, Claudio and Brunetti, Francesca and Ulisse, Giacomo and Di Carlo, Aldo (2008) Flip-cathode field emission vacuum triode for THz applications. In: .

Riccitelli, Riccardo and Paoloni, Claudio and Brunetti, Francesca and Ulisse, Giacomo and Di Carlo, Aldo and sessa, v. and Terranova, M. L. and Cirillo, M. and Orlanducci, Silvia (2008) Innovative vacuum device flip-cathode based on carbon nanotubes field emitters. In: First Mediterranean Photonic Conference. , Italy.

Richardson, A. M. D. and Lechner, A. (2000) Design-for-testability for mixed signal and analogue design. In: Proceedings of 7th international conference on mixed design of integrated circuits and systems. , Poland.

Richardson, Andrew M. D. and Mir, S. and Cheng, T. (2006) Guest editorial. Journal of Electronic Testing, 22 (4-6). p. 311. ISSN 0923-8174

Richardson, Andrew M. D. and Solomon, P. and El-Fatatry, A. (2006) MNT needs methodologies and software tools. MST News (VDI/VDE Technologiezentrum Informationstechnic), 2. pp. 16-35. ISSN 0948-3128

Rietveld, M. T. and Honary, F. and Robinson, T. R. and Thide, B. and Stubbee, P. (1997) An HF magnetospheric radar for EISCAT. In: Proceedings of the 8th EISCAT international workshop. , Leicester.

Roberts, P. and Joyce, Malcolm J. (2003) Speech recognition software for dysarthric speakers. In: Proceedings of the 5th European CPLOL congress. .

Robertson, David and Taylor, C. James (2012) Low-level joint control of a robotic manipulator using state-dependent parameter models. In: .

Robertson, David and Taylor, C. James (2012) State-dependent control of a hydraulically-actuated nuclear decommissioning robot. In: 2012 UKACC International Conference on Control, 2012-09-032012-09-05.

Roger, L. E. and Widden, M. B. and Osborne, M. J. (2000) Foam formation in low expansion fire fighting equipment. In: Proceedings of the Eurofoam 2000 conference. , The Netherlands.

Rosing, R. and Reichenbach, R. and Richardson, Andrew M. D. and Dorey, A. P. (2001) Generation of component level fault models for MEMS. In: Proceedings of the 7th international mixed-signal testing workshop (IMSTW ’01). , pp. 40-45.

Rosing, R. and Richardson, Andrew M. D. (2003) Modelling techniques for reliability prediction in MEMS technologies. In: Proceedings of the Nanotech 2003 conference. .

S

Salisbury, A. and Peyton, A. J. and Dytch, A. (2002) A novel cost effective contactless inductive current sensor. In: Proceedings of the EPSRC PREP 2002 conference. .

Sandmann, Steffan and Quayle, Stephen (2007) Characterisation of the geometrical and kinematical influences of a 5-axis machining cell on the quality of the laser structuring process. In: 8th International Conference on Rapid Prototyping, 2000-06-122000-06-13.

Scholes, S. C. and Green, S. M. and Unsworth, A. (2004) THE WEAR OF ALUMINA-ON-ALUMINA TOTAL HIP PROSTHESES. Journal of Bone and Joint Surgery, British Volume, 86-B (SUPP I). p. 403.

Scott, J. and Bradley, D. A. and Seward, D. W. and Adelson, R. M. and Pengelly, M. (1997) The development of an interactive simulation of site information technology systems in relation to construction automation. In: Proceedings of the 14th international symposium on robotics in construction. Carnegie Mellon University, Pittsburgh, pp. 154-165.

Scott, J. N. and Bradley, D. A. and Adelson, R. M. and Pengelly, M. and Seward, D. W. (1994) IT in support of construction site automation and robotics. In: Proceedings of the 11th international symposium on automation and robotics in construction XI (ISARC). Elsevier, Amsterdam, pp. 531-538. ISBN 0444820442

Selim, Ramsey and Pinto, Domenico and Obayya, Salah (2008) Complex Envelope Alternating Direction Implicit Finite Difference Time Domain Analysis Of Ultra-Fast Photonic Bandgap Switches. In: Semiconductor and Integrated Optoelectronics, SIOE’08, 2008-03-312008-04-02.

Selim, Ramsey and Pinto, Domenico and Obayya, Salah (2010) Terahertz Ultra Fast Switching Device Based Photonic Crystals. In: Semiconductor and Integrated Optoelectronics, SIOE 2010, 2010-03-292010-03-31.

Seward, D. W. (1994) Behaviours, models and the LUCIE robot excavator. In: Proceedings of an ALSB'94 workshop. , Leeds.

Seward, D. W. (1992) Designing a robot excavator - the decision making process. In: Mechatronics case studies. Mechatronics case studies.

Seward, D. W. (1992) Robot excavator. In: IEE computing and control colloquium on telerobotically controlled mobil vehicles. , London, 5/1-5/3.

Seward, D. W. (1992) Robots in construction. Industrial Robot: An International Journal, 19 (3). pp. 25-29.

Seward, D. W. and Bradley, D. A. and Mann, J. E. and Goodwin, M. R. (1992) Controlling an intelligent excavator for autonomous digging in difficult ground. In: 9th international symposium on automation and robotics in construction. , Tokyo.

Seward, D. W. and Bradley, D. A. and Margrave, F. W. (1994) Hazard analysis techniques for mobile construction robots. In: Proceedings of the 11th international symposium on automation and robotics in construction XI (ISARC). Elsevier, Amsterdam, pp. 35-42. ISBN 0444820442

Seward, D. W. and Margrave, F. W. and Sommerville, I. and Kotonyam, G. (1995) Safe systems for mobile robots: the safe-SAM project. In: Proceedings of the 3rd safety-critical systems symposium published as directions in safety-critical systems. Springer-Verlag, Brighton, pp. 153-170.

Seward, D. W. and Quayle, S. (1997) LUCIE - Lancaster University computerised intelligent excavator. Circuit Cellar - The Magazine For Computer Applications, 79. pp. 67-73.

Seward, D. W. and Quayle, S. (1996) System architectures and safety for mobile construction robots. In: Proceedings of the 13th international symposium on robotics in construction. Japan Robot Association (JARA), Tokyo, Japan, pp. 727-732.

Seward, D. W. and Quayle, S. and Mure, N. and Scott, J. (1999) Global integration of construction automation and robotics. In: Proceedings of the 16th IAARC/IFAC/IEEE international symposium on automation and robotics in construction. , Madrid, pp. 11-16.

Seward, D. W. and Ward, J. and Findlay, J. and Kinniburgh, H. (1996) The automation of piling rig positioning using satellite GPS. In: Proceedings of the 13th international symposium on robotics in construction. Japan Robot Association (JARA), Tokyo, Japan, pp. 223-230.

Seward, Derek and Agate, R. Y. and Bakari, Mohamed and Pace, C. M. (2006) Control architecture characteristics for intelligence in autonomous mobile construction robots. In: Proceedings of the 24th international symposium on automation and robotics in construction. , pp. 846-851.

Seward, Derek W. and Bakari, M. J. (2005) The use of robotics and automation in nuclear decommissioning. In: Proceedings of the 22nd international symposium on automation and robotics in construction. .

Seward, Derek W. and Joyce, Malcolm J. (2001) Teaching safety – issues of course design and delivery. In: Proceedings of a safety critical systems symposia. .

Seward, Derek W. and Pace, C. M. and Agate, Rahee Y. (2006) Implementation issues for safe behaviour in robotic systems. In: Proceeding of the European safety and reliability conference (ESREL 2006). .

Seward, Derek W. and Quayle, Stephen D. (2004) Formula student – the problem of learning and assessment. In: Proceedings of the international conference on innovation, good practice and research in engineering education. , pp. 99-104.

Seward, Derek W. and Quayle, Stephen D. and Kied, K. and Pace, C. (2002) Data interpretation from Leuze RotoScan sensor for robot localisation and environment mapping. In: Proceedings of the 19th international symposium on automation and robotics in construction. .

Seward, Derek W. and Zied, K. (2003) Towards a comprehensive feasibility analysis for the use of robots in the construction industry. In: Proceedings of the 20th international symposium on automation and robotics in construction. , pp. 399-405.

Seward, Derek W. and Zied, K. and Riehl, J. (2001) The use of simulation in the economic analysis of robotised construction tasks. In: Proceedings of the 18th international symposium on robotics in construction. , pp. 265-270.

Shaban, E. M. and Taylor, C. James (2005) Proportional-integral-plus control of a class of nonlinear systems using exact and partial linearisation by feedback. In: Proceedings of the international conference on automatic control and system engineering (ACSE-05). .

Shaban, E. M. and Taylor, C. James and Chotai, A. (2004) State dependent parameter proportional-integral-plus (SDP-PIP) control of a nonlinear robot digger arm. In: Proceedings of the UKACC international conference on control. .

Shaban, E. M. and Zied, K. and Taylor, C. James and Seward, Derek W. (2005) Nonlinear control system design for construction robots: estimation, partial linearization by feedback and state-dependent-parameter control. In: Proceedings of the 22nd international symposium on automation and robotics in construction (ISARC-05). .

Shah, K. and Salman, A. and Pinkerton, A. J. and Li, L. (2009) The significance of melt pool variables in laser direct deposition of functionally graded aerospace alloys. In: Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 569-576.

Sharp, J. E. E. and Adey, A. J. (1992) Engineering design - an integrated programme for the development of confidence in technical decision taking. In: Proceedings of the 3rd World Conference on Engineering Education : held in Portsmouth, UK, during 20-25 September 1992. Computational Mechanics Pubs, Southampton ; Boston. ISBN 1562521179

Sharpe, John (1994) Keynote address: mechatronics - the design challenge: an overview of the issues raised during the optimal design of mechatronic systems and products. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton.

Sharpe, John and Goodwin, E. M. (1993) Application of bond graphs in complex concurrent multi-disciplinary engineering design. In: Proceedings of the 1993 international conference on bond graph modelling and simulation. US Society for Computer Simulation, San Diego, pp. 7-13.

Sheng, H Y and Ye, J Q (2004) Free-edge effect in cross-ply laminated plates under a uniform extension. Structural Engineering and Mechanics, 18 (3). pp. 377-388. ISSN 1225-4568

Shippen, Alan and Joyce, Malcolm J. (2008) Profiling the depth of caesium-137 contamination in concrete via a relative linear attenuation model. In: 7th International Topical Meeting on Industrial Radiation and Radioisotope Measurement Applications (IRRMA7), 2008-06-01.

Shippen, B. A. and Joyce, Malcolm J. (2007) Profiling the gamma-ray distribution of the cement lining of an established nuclear pond as a function of depth. In: European Nuclear Congress, 2007-09-162007-09-20.

Shippen, B. A. and Joyce, Malcolm J. (2007) Profiling the gamma-ray distribution of the cement lining of an established nuclear pond as a function of depth. In: UK Decommissioning and Waste Management Conference, 2007-10-01.

Shippen, David I. and Joyce, Malcolm J. and Aspinall, Michael (2009) A Wavelet Packet Transform Inspired Method of Neutron-Gamma Discrimination. In: Proc. ANIMMA International Conference, 2009-06-072009-06-10.

Simm, W. and Roberts, P. E. and Philpott, C. and Joyce, Malcolm J. (2005) The quantitative assessment of dysarthric speech for use in evidence-based therapy. In: Proceedings of the 3rd conference on universal access in human-computer interaction. .

Simm, William and Roberts, Peter E. and Joyce, Malcolm J. (2006) Dysarthic speech measures for use in evidence-based speech therapy. In: Proceedings of the 3rd Cambridge workshop on universal access and assistive technology. Springer, London, pp. 155-164.

Sivasundarasan, P. and Bradley, D. A. (1994) An intelligent soft-start system for large induction machines. In: Mechatronics - the basis for a new industrial development. Computational Mechanics Publications, Southampton, pp. 373-379.

Smith, Jeremy and Bashir, Aneeqa and Adamopoulos, George and Bradley, Donal and Anthopoulos, Thomas (2009) High-Mobility Ambipolar Organic-Inorganic Hybrid Transistors (Invited). In: 2nd International Symposium on Flexible Organic Electronics, 2009-07-08.

Smith, Paul and Rennie, Allan (2011) Automated variation in product design: Using visual basics.net programming language to generate product variation. In: Proceedings of the RAPDASA 2011 Conference. .

Smith, Paul and Rennie, Allan (2009) A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM). In: 4th International Conference on Advanced Research in Virtual and Rapid Prototyping. Taylor & Francis Group, Leiria, Portugal, pp. 95-100. ISBN 978-0-415-87307-9

Smith, Paul and Rennie, Allan (2010) Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials. In: 11th National Conference on Rapid Design, Prototyping and Manufacturing. CRDM Ltd, High Wycombe, pp. 55-61. ISBN 978-0-9566643-0-3

Smith, Paul and Rennie, Allan (2008) Rapid Manufacturing Design Tools. In: Lancaster University, Faculty of Science & Technology Christmas Conference, 2008-12-162008-12-16. (Unpublished)

Soldatos, K P and Ye, Jianqiao (1995) On three-dimensional buckling analysis of orthotropic cylinders. In: Proceedings 15th Canadian Congress of Applied Mechanics CANCAM 95. .

Soldatos, K P and Ye, Jianqiao (1995) Three-dimensional buckling analysis of orthotropic cylinders subjected to thermo-mechanical loadings. In: Homogeneity and Nonlinearity in Solid Mechanics. Solid Mechanics and Its Applications . Kluwer Academic Publishers. ISBN 978-0-7923-3594-8

Soleimani, M. and Lionheart, W. R. B. and Peyton, A. J. and Ma, X. (2004) Molten metal flow visualisation using mutual induction tomography (MIT). In: 2004 Proceedings of the ASME 7th Biennial Conference on Engineering Systems Design & Analysis. . ISBN 0791841731

Soleimani, M. and Ma, X. and Peyton, A. J. (2007) Dynamic magnetic induction tomography imaging of molten metal flow using the Kalman filter. In: 5th World Congress on Industrial Process Tomography, 2007-09-032007-09-06.

Sommerville, I. and Seward, D. W. and Morey, R. and Quayle, S. (1997) Safe systems architectures for autonomous robots. In: Proceedings of the safety critical systems conference. , Brighton.

Srivastava, V. and Joshi, S. N. and Carter, R. G. (1994) Analysis of electron beam in a TWT operating under different conditions. In: Proceedings of the 4th international conference on charged particle optics. .

Srivastava, V. and Joshi, S. N. and Perring, D. and Carter, R. G. (1993) An improved 2.5 dimensional large-signal model for helix TWTs. In: Proceedings of the fourth international symposium on recent advances in microwave technology. , New Delhi.

Stamp, D. W. and Lyons, A. R. A. and Peyton, A. J. and Drake, P. (2001) Visualisation of the steel flow pattern in the Tundish pouring nozzle. In: Proceedings of the 2nd international conference on science and technology of steelmaking. .

Street, M. and Hunt, B. and Darnell, M. and Honary, B. and Maundrell, M. (1993) Automatic link establishment: current status and future improvements. In: Proceedings of the 2nd international symposium on communication theory and applications. , Ambleside, pp. 129-131.

Sutherland , Hugh (2012) Fuel cells. WO2012104599 (A1).

Syed, W. U. H. and Pinkerton, A. J. and Li, L. and Al-Eid, E. and Pan, J. (2005) Statistical analysis of the effect of processing conditions on powder catchment efficiency in the Direct Laser Deposition (DLD) process. In: Virtual modeling and rapid manufacturing. Taylor and Francis, London, pp. 361-367. ISBN 9780415390620

Syed, W. U. H. and Pinkerton, A. J. and Liu, Z. and Li, L. (2005) Single-step graded surface coating using combined wire and powder feeding laser cladding. In: Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, pp. 787-795.

T

Taleb-Bendiab, A. and Oh, K. S. V. and Sommerville, I. and French, M. J. (1992) Collaborative design: knowledge-based systems for concurrent engineering. In: ECAI'92. , Vienna.

Taleb-Bendiab, A. and Oh, K. S. V. and Sommerville, I. and French, M. J. (1993) Constraint management support for multi-agent design product improvement activity. In: Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, Proceedings of the Sixth International Conference, Edinburgh, Scotland, UK, June 1993. Gordon and Breach, pp. 53-56. ISBN 2881246044

Taleb-Bendiab, A. and Oh, K. S. V. and Sommerville, I. and French, M. J. (1992) Knowledge-representation for engineering design product improvement. In: Applications of artificial intelligence in engineering VII. Computational Mechanics/Elsevier, Southampton; London, pp. 807-824.

Taleb-Bendiab, A. and Oh, K. S. V. and Sommerville, I. and French, M. J. (1992) SIMAD: a system for improving mechanical assembly design. In: Proceedings first Singapore international conference on intelligent systems. SPICIS '92 Technical Committee, pp. 257-262.

Tannock, J. D. T. and Burge, S. E. (1992) Quality assurance in higher education. In: Engineering Professors' Conference Occasional Paper No 4. .

Tannock, J. D. T. and Burge, S. E. (1993) A model for quality assurance in higher education. In: Proceedings of SEFI annual conference on achieving and assessing quality of engineering education. , pp. 181-193.

Taylor, C. J. and Chotai, A. and Young, P. C. (2000) Non-minimal state space design: a unified approach to state variable feedback. In: Proceedings of the 15th international conference on systems engineering. Coventry University.

Taylor, C. James (2007) Evaluation of Ramp Metering on the M3/M27 and the potential benefits of predictive and linked control optimized for queue constraints. In: Workshop on Ramp Metering in Europe: The EURAMP Project, 1900-01-01.

Taylor, C. James and Bradshaw, A. and Chaplin, R. V. and French, M. and Widden, Martin B. (2002) Wave energy research at Lancaster University: PS frog and frond. In: Proceedings of the world renewable energy congress VII held in Cologne, Germany. .

Taylor, C. James and Chotai, Arun (2010) Nonlinear control by input-output pole assignment: state space derivation. In: UKACC International Conference Control 2010. , pp. 1076-1081. ISBN 978-184600-0386

Taylor, C. James and Chotai, Arun (2009) State dependent ramp metering control of motorway bottlenecks using non-linear pole assignment. In: 12th IFAC Symposium on Control in Transportation Systems. .

Taylor, C. James and Chotai, Arun and Young, Peter C. (1998) Multivariable Proportional-Integral-Plus (PIP) control of time delay systems. In: IMECHE Seminar: Tuning-In to Increase Profit: Developments in PID Tuning, 1998-03-31.

Taylor, C. James and Exadaktylos, V. and Chotai, Arun (2006) Non-minimal model predive control with an integral-of-error state variable. In: Proceedings of the UKACC international conference on control. .

Taylor, C. James and McCabe, A. and Young, Peter C. and Chotai, Arun (1998) Proportional-Integral-Plus (PIP) control of the GEC Alsthom Gasifier benchmark challenge. In: MEC Benchmark Challenge on Gasifier Control, 1998-06-24.

Taylor, C. James and McKenna, Paul G. and Young, Peter C. and Chotai, Arun and Scariza, J. (2003) Traffic flow modelling and linked ramp metering control for the M3/M27 pilot scheme. In: Proceedings of the 16th international conference on systems engineering, ICSE 2003. , pp. 687-692.

Taylor, C. James and Shaban, E. M. (2004) Multivariable proportional-integral-plus (PIP) control of the ALSTOM nonlinear gasifier model. In: UKACC International Control Conference. .

Taylor, C. James and Shaban, E. M. and Chotai, Arun and Ako, S. (2006) Development of an automated verticality alignment system for a vibro-lance. In: Proceedings of the 7th Portuguese conference on automatic control (Controlo-07). .

Taylor, C. James and Shaban, E. M. and Chotai, Arun and Ako, S. (2006) Nonlinear control system design for construction robots using state dependent parameter models. In: Proceedings of the UKACC international conference on control. .

Taylor, C. James and Sidiropoulou, Eleni and Shaban, E. M. and Tych, Wlodek and Chotai, Arun (2006) Linear, nonlinear and classical control of a 1/5th scale automated excavator. In: Proceedings of the 18th international conference on systems engineering (ICSE-06). .

Taylor, C. James and Stables, M. A. and Chotai, Arun (2006) Control of micro-climate using time delay state dependent parameter models. In: Proceedings of the 18th international conference on systems engineering (ICSE-06). .

Taylor, C. James and Stables, M. A. and Cross, Philip and Gunn, K. and Aggidis, George A. (2009) Linear and nonlinear control of a power take-off simulation for wave energy conversion. In: 8th European Wave and Tidal Energy Conference. .

Taylor, C. James and Stables, M. A. and Young, Peter C. (2004) Identification of a multivariable state dependency for airflow rate in a forced ventilation test chamber. In: Proceedings of the UKACC International Conference on Control. .

Taylor, C. James and Young, Peter C. and Chotai, Arun and Whittaker, J. (1998) Proportional-Integral-Plus (PIP) co-ordinated ramp metering control of motorway networks. In: DACCORD Workshop on Advanced Motorway Traffic Control, 1998-12-10.

Taylor, S. M. and Rennie, Allan E. W. and Quayle, Stephen and Rawcliffe, N. (2005) From Concept to Manufacture: Effective use of CAD and FEA Without Compromising Design Intent. In: Rapid Design, Prototyping and Manufacture. X-CD Technologies Inc, pp. 101-107. ISBN 0-9737783-1-8

Taylor, Stuart and Rennie, Allan and McDonald, Walter (2007) Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach. In: Virtual and Rapid Manufacturing. Taylor & Francis Group, London, pp. 811-816. ISBN 978-0-415-41602-3

Thomas, A and Aggidis, George A. (2007) Review and state of the art of wave energy and wave energy converters, IMechE, Fluid Machinery for Developing Engineers, Cranfield, (Invited Paper). IMechE Conference Transactions, v. 1.

Thomas, Stuart and Adamopoulos, George and Bashir, Anneqa and Bradley, Donal and Anthopoulos, Thomas (2011) Crystallographic engineering of oxide semiconductors for transistors and microelectronics applications. In: Materials Research Society. .

Tunnicliffe-Wilson, J. C. and Dorey, A. P. (1992) Mathematics in electronic engineering. In: 6th conference on teaching electronic engineering in degree courses. , Hull, 43/1-43/9.

Turvey, G. J. (1999) Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections. In: Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999. RAPRA, pp. 1-8. ISBN 978-1-85957-199-6

Turvey, G. J. (1998) Frame connections. In: COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. European Commission, Brussels/Luxembourg, pp. 27-49.

Turvey, G. J. (2000) Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats. In: Proceedings in the ECCM9 (composites – from fundamentals to exploitation). , Brighton.

Turvey, G. J. (1998) Plate-to-plate mechanical: part II: testing and applications. In: COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. European Commission, Brussels/Luxembourg, pp. 15-26.

Turvey, G. J. (1998) Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles. In: Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14.

Turvey, G. J. (1999) Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1. In: Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections. , Liege, pp. 547-556.

Turvey, G. J. (1992) Tension/compression strength of unnotched/notched pultruded GRP plate. In: Proceedings of the ECCM-composites testing and standardisation conference. .

Turvey, G. J. (1996) Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project. In: Structural design of polymer composites: EUROCOMP design code and handbook. E. and FN Spon, London, pp. 719-741. ISBN 0419194509.

Turvey, G. J. (1995) Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project. In: EUROCOMP design guide and background projects. Chapman and Hall, London.

Turvey, G. J. and Brooks, R. J. (1996) Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions. In: Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona, pp. 651-664.

Turvey, G. J. and Cooper, C. (1996) Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections. In: Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Canadian Society for Civil Engineering, Montreal, pp. 927-934.

Turvey, G. J. and Cooper, C. (1998) Semi-rigid connection in pultruded GRP frame structures. In: Mechanics of composite materials and structures. , pp. 151-166.

Turvey, G. J. and Cooper, C. (1998) Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction. In: Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98). University of Arizona, pp. 221-235.

Turvey, G. J. and Cooper, C. (1995) Single bolt tension joint tests on pultruded GRP WF-section web and flange material. In: Proceedings of the 10th international conference on composite materials (ICCM-10). Woodhead Publishing Ltd., Vancouver, pp. 621-628.

Turvey, G. J. and Cooper, C. (1998) Uplift tests on column base connections in pultruded GRP frames. Proceedings of the eighth international conference on composite materials (ECCM-8). pp. 285-292.

Turvey, G. J. and Drinali, H. (1996) Full-range response of circular steel plates subjected to combined transverse pressure and edge compression. In: Advances in computational techniques for structural engineering. Civil-Comp press, Edinburgh. ISBN 0948749458

Turvey, G. J. and Osman, M. Y. (2000) Uniform and patch loaded steel plates – comparisons between analysis and experiment. In: Proceedings of the 5th international conference on computational structures technology. , Leuven.

Turvey, G. J. and Salehi, M. (1997) Full-section yield analysis of uniformly loaded sector plates. In: Trends in structural mechanics: theory, practice and education. Solid mechanics and its applications (v. 54). Kluwer Academic, Dordrecht; London, pp. 289-298. ISBN 0792346033

Turvey, G. J. and Slater, R. C. (1992) Tests on pultruded GRP posts for handrail/barrier structures. In: First international conference on advanced composite materials in bridges and structures. , Canada.

Turvey, Geoffrey (2006) Failure of pultruded GRP WF-section webs in compression - an experimental investigation. In: Proceedings of the 12th European conference on composite materials (ECCM-12). .

Turvey, Geoffrey J. (2001) Evaluation of the structural performance of box beams fabricated from a novel system of pultruded profiles. Composites in constructions. pp. 803-808.

Turvey, Geoffrey J. (2004) An experimental evaluation of the stiffening effect of CFRP flange reinforcement and practical end connections on the flexural response of pultruded GRP WF-beams. In: Proceedings of the IMTCR-04 conference on innovative materials and technologies for construction and restoration: volume 1: keynotes, materials, construction. , pp. 578-588.

Turvey, Geoffrey J. and Mulcahy, N. (2004) Vibration frequencies and mode shapes of pultruded GRP circular plates with central circular cut-outs. In: Proceedings of the 4th international conference on thin-walled structures: thin-walled structures: advances in research, design and manufacturing technology. , pp. 927-934.

Turvey, Geoffrey J. and Salehi, M. (2003) Annular sector plates: comparison of full-section and layer yield predictions. In: Proceedings of the 9th international conference on civil and structural engineering computing. , pp. 89-90.

Turvey, Geoffrey J. and Salehi, M. (2001) Elasto-plastic large deflection of uniformly loaded sector plates. In: Proceedings of the 3rd international conference on thin-walled structures. , pp. 631-640.

Turvey, Geoffrey J. and Wang, P. (2001) Effects of temperature on the structural integrity of bolted joints in pultrusions. Composites in constructions. pp. 171-176.

Turvey, Geoffrey J. and Wang, P. (2004) Recent research advances at Lancaster University on double-lap bolted tension joints in pultruded GRP plate material. In: Proceedings of the 7th world pultrusion conference. , pp. 1-16.

Turvey, Geoffrey J. and Wang, P. (2001) Single bolt tension joints in pultruded GRP material – effect of elevated temperature on failure loads and strengths and joint efficiency. In: Proceedings of the BSSM conference on strain measurement in the 21st century. , pp. 20-23.

Turvey, Geoffrey J. and Zhang, Y. (2004) Finite element analysis of buckling and initial failure loads of short pultruded GRP columns. In: Proceedings of the 7th international conference on computational structures technology. , pp. 57-58.

Turvey, Geoffrey J. and Zhang, Y. (2004) Local buckling of axially compressed, pultruded GRP WF-section short columns – comparison of experimental response with FE analysis predictions. In: Proceedings of the BSSM (British society for strain measurement) international conference on advances in experimental mechanics: advances in experimental mechanics. , pp. 87-92.

Turvey, Geoffrey J. and Zhang, Y. (2004) Shear failure strength of web-flange junctions in pultruded GRP profiles. In: Proceedings of the ASIC 2004 conference: advanced polymer composites (ASIC 2004). , pp. 553-560.

Turvey, Geoffrey J. and Zhang, Y. (2003) Tearing failure of web-flange junctions in pultruded GRP profiles. In: Proceedings of the DFC-7 conference on deformation and fracture of composites. .

Turvey, Geoffrey J. and Zhang, Y. (2004) Torsion of a pultruded GRP WF beam with practical end connections: experimental results and FE analysis. In: Advanced composite Materials in bridges and structures. , p. 99.

Turvey, Geoffrey J. and Zhang, Y. (2004) Web-flange junctions of pultruded GRP WF profiles: notched flange shear strengths. In: Proceedings of a conference: FRP composites in civil engineering (CICE 2004). , pp. 859-864.

V

Vogel, M and Khan, M. and Ibarra-Medina, J. and Pinkerton, A. J. and N'Dri, N. and Megahed, M. (2012) A verified model of transient and residual stresses in laser direct metal deposition. In: Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, Paper 304.

Vogel, M. and Ibarra-Medina, J. and N'Dri, N. and Pinkerton, A. J. (2011) An integrated model of laser clad formation using CFD and FE methods. In: Surface modification technologies XXV. Valardocs, India. ISBN 978-81-910571-4-0

W

Wan-Daud, W. A. and Peyton, A. J. and Tapp, H. S. and Crescenzo, E. (2002) Investigation of an integrated body scanning system using multiple cameras and structured light for determination of human body shape and volume. In: Proceedings of the 9th symposium of the société de biométrie humaine. .

Wan-Daud, W. A. and Peyton, A. J. and Tapp, H. S. and Crescenzo, E. (2003) Towards an integrated system using multiple cameras and structured lighting for the measurement of human body shape and volume. In: Proceedings of the international conference on robotics, vision, information and signal processing (ROVISP 2003). .

Wan-Daud, W. A. and Peyton, A. J. and Tapp, H. S. and Crescenzo, E. (2003) Towards an integrated system using multiple cameras and structured lighting for the measurement of human body shape and volume. Biométrie Humaine et Anthropologie, 21. pp. 121-127. ISSN 1279-7863

Wang, P. and Carter, R. G. and Basu, B. N. (1994) An improved technique for measuring the Pierce impedance of helix slow-wave structures. In: Proceedings of the 24th European microwave conference. Nexus, Cannes.

Wang, Yifei and Ma, Xiandong and Joyce, Malcolm (2012) Optimal sensor selection for wind turbine condition monitoring using multivariate principal component analysis approach. In: Proceedings of the 18th International Conference on Automation & Computing (ICAC’12), Loughborough University, Leicestershire, UK, 8 September 2012, 2012-09-08.

Weaver, J. A. and Joyce, M. J. and Peyton, A. J. and Roskell, J. (2000) Reliability and usability improvements to a transportable neutron spectrometer (TNS). In: Proceedings of the regional symposium on quality and automation (RESQUA 2000). , pp. 292-301.

Weaver, J. A. and Joyce, M. J. and Peyton, A. J. and Roskell, J. (2000) Signal processing techniques applied to a transportable neutron spectrometer (TNS). In: INucE Int. Conf. Control and Instrumentation in Nuclear Installations, 2000-01-01.

Weaver, J. A. and Joyce, M. J. and Peyton, A. J. and Silvie, J. (2000) Recent improvements to a transportable neutron spectrometer (TNS). In: Proceedings of the international workshop on neutron field spectrometry in science, technology and radiation protection. , Pisa.

Weaver, J. A. and Peyton, A. J. and Joyce, M. J. and Silvie, J. (2000) The introduction of digital processing techniques to a neutron sensing system. In: Proceedings of the 2nd conference on postgraduate research in electronics and photonics. , pp. 30-35.

Widden, M. B. and French, M. J. (2000) Economical conversion of low-head hydropower. In: Proceedings of the world renewable energy congress VI. , Brighton, pp. 1611-1614.

Widden, M. B. and Oh, V. K. and Li, M. and Green, I. and Chaplin, R. V. (1994) Function-costing and function maps in conceptual design. In: Proceedings of the 1994 Lancaster international workshop on engineering design: computer-aided conceptual design, CACD'94. .

Widden, Martin and Rennie, Allan and Quayle, Stephen and Gunn, K. (2011) A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture. In: Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011. Technical University of Denmark, pp. 1039-1048. ISBN 978‐87‐985272‐6‐8

Widden, Martin B. and French, M. J. and Aggidis, George A. (2005) Analysis of PS frog pitching and surging wave-energy converter operating in regular sinusoidal waves. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment. ISSN 1475-0902

Widden, Martin B. and French, M. J. and Aggidis, George A. (2004) Economic energy from low head water by conversion to air pressure. IMechE Conference Transactions, v. 6. pp. 41-49.

Widden, Martin B. and French, M. J. and Aggidis, George A. (2005) The power capture of PS frog pitching and surging point absorber wave energy converter. In: Proceedings of the international symposium on fluid machinery for wave and tidal energy: state of the art and new developments. .

Winchester, Jonathan and Quayle, Stephen (2009) Torque ripple and variable blade force: A comparison of Darrieus and Gorlov-type turbines for tidal stream energy conversion. In: 8th European Wave and Tidal Energy Conference, 2009-09-072009-09-10.

Winsby, A. J. and Burge, S. and Grout, I. and Widden, Martin B. (2003) An intuitive visual aid to the design and analysis of controller transformations. In: Proceedings of the educational ECAD user group. .

Winsby, A. J. and Quayle, Stephen D. and Seward, Derek W. (2003) Towards the realisation of a multi-perspective virtual design environment: the integration of design tools, methods and virtual reality. In: Proceedings of the 4th national conference on rapid and virtual prototyping and applications. .

wrigley, Stephen and Lambert, Christopher and Rennie, Allan (2008) The SME Carbon Game:Issues faced when developing a Carbon Footprint Toolkit for SMEs. In: IEMA Annual Conference and Exhibition 2008, 2008-06-042008-06-05. (Unpublished)

Y

Yan, X. T. and Chaplin, R. V. and Sharpe, J. E. E. (1994) A parametric approach to mechatronic product design. In: Proceedings of the 1994 engineerings systems design and analysis conference, ESDA'94. American Society of Mechanical Engineers.

Yang, Dongmin and Sheng, Yong and Ye, Jianqiao and Tan, Yuanqiang (2011) Multi-scale modelling of damage progression in FRC laminates - Applications of DEM. In: Particle-Based Methods II. International Center for Numerical Methods in Engineering (CIMNE), Barcelona, pp. 256-263. ISBN 9788489925670

Yang, J and Ye, J Q (2002) Dynamic elastic local buckling of piles under impact loads. Structural Engineering and Mechanics, 13 (5). pp. 543-556. ISSN 1225-4568

Yang, Jian and Ye, Jianqiao (2005) Closed-form rigorous solution for the interfacial stress in plated beams using a two-stage method. In: Bond behaviour of FRP in structures :. International Institute for FRP in Construction. ISBN 9623675062

Yavuz, H. and Bradshaw, A. (1999) Conceptual design and modelling of a domestic mobile robot. In: Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). , Windermere, pp. 15-35.

Yavuz, H. and Bradshaw, A. and Dogantan, Z. S. (1997) Navigation system design for an individual excavator robot. In: Proceedings of Mamkon '97. , Istanbul, pp. 489-495.

Yavuz, H. and Chandler, A. and Bradshaw, A. and Seward, D. W. (1999) Conceptual design and development of a navigation system for a mobile robot. In: Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). , Windermere, pp. 65-85.

Ye, J Q (2000) Edge effects in cross-ply laminated hollow cylindrical shells. In: Computational techniques for materials, composites and composite structures. Civil-Comp press, Edinburgh, pp. 359-363. ISBN 0948749695

Ye, Jianqiao (1998) Decay rate of boundary effects in laminated composite cylinders and cylindrical panels. In: Proceedings of the 1998 ASME Engineering Systems Design and Analysis (ESDA) Conference. .

Ye, Jianqiao (1999) Interfacial effects On RC beams strengthened by bonded composite plates. In: Proceedings of the Second Asia Pacific Specialty Conference on Fiber Reinforced Concrete. , Singapore.

Ye, Jianqiao (2008) Structural and Stress Analysis:theories, Tutorial and Examples. Spon Press (Taylor and Francis). ISBN 0-415-36865-0

Ye, Jianqiao (2009) Three-dimensional Modeling of Stress Transfer, Stiffness Degradation, failure and Transverse Cracking in Composite Laminates. In: Advances in Engineering Mechanics. Nova Science Publishers, pp. 127-165. ISBN 978-1-60876-901-8

Ye, Jianqiao and Soldatos, K P (1996) Axisymmetric vibration analysis of laminated hollow spheres composed of transversely isotropic layers. In: Proceedings of the 1996 Engineering Systems Design and Analysis Conference. American Society of Mechanical Engineers. ISBN 0791814963

Ye, Jianqiao and Yang, Jian (2004) Stress transfer in cross-ply laminates with transverse cracks. In: Computational Mechanics: Proceedings of the Sixth World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics, September 5-10, 2004, Beijing, China. Tsinghua University Press & Springer-Verlag, Beijing. ISBN 7302093431

Ye, Jianqiao and Zhang, Daxu (2008) Initiation and propagation of transverse cracking in composite laminates. In: Third International Conference on Engineering Failure Analysis, ICEFA-III, Barcelona. Elsevier.

Yin, W. and Dickinson, S. J. and Peyton, A. J. (2003) The use of inductance spectroscopy to image the conductivity distribution of a layered conductor. In: Proceedings of the 3rd world congress on industrial process tomography. , pp. 472-478.

Yin, W. and Ma, X. and Zysko, G. and Peyton, A. J. (2007) Linear EMT for the detection of faults in metallic planar structures (DIF). In: 5th World Congress on Industrial Process Tomography, 2007-09-032007-09-06.

Yu, Z. Z. and Peyton, A. J. (1997) Development of sensor arrays for electromagnetic tomography. In: Proceedings of the conference on frontiers in industrial process tomography II. , The Netherlands.

Yung, R. and Darnell, M. and Charbit, G. and Honary, B. and Harris, M. (1992) Time-scaled implementation of the FHSS communication system using multiple DSP'S. In: First international symposium on DSP for communication systems. University of Warwick, pp. 143-156.

Z

Zhang, C. and Margrave, F. W. and Bradshaw, A. (1994) Accuracy improvement of machine tools by computer real-time control. In: Proceedings of the annual meeting of the American society for precision engineers. , Cincinnati.

Zhang, L. and Bradley, D. A. and Seward, D. W. (1997) The simulation and modelling of safety systems for construction robots. In: Proceedings of the 14th international symposium on robotics in construction. Carnegie Mellon University, Pittsburgh, pp. 224-229.

Zhang, L. Bradley and Seward, D. W. (1993) Safety critical systems for robot excavation. In: Automation and robotics in construction X : proceedings of the 10th International Symposium on Automation and Robotics in Construction (ISARC) Houston, Texas, U.S.A., 24-26 May, 1993. Elsevier, Amsterdam ; London, pp. 109-116. ISBN 0444815236.

Zhao, L. and Carter, R. G. and Wang, P. (1993) The resonant frequencies of cavities with arbitrary shapes using 3-dimensional FDTD algorithm in non-orthogonal coordinates. In: Proceedings of the Asia-Pacific microwave conference. , Taiwan.

Zyablov, V. and Potapov, V. and Sidorenko, V. and Markarian, G. S. and Honary, B. (1993) Recursive decoding algorithms for hamming codes. In: 2nd International Symposium Communication Theory & Applications. , Ambleside, UK, pp. 18-21.

This list was generated on Fri Apr 27 02:25:36 2018 BST.