Lancaster EPrints

Statistical wear analysis of PA-6/UHMWPE alloy, UHMWPE and PA-6.

Liu, C. Z. and Ren, L. Q. and Tong, J. and Joyce, T. J. and Green, S. M. and Arnell, R. D. (2001) Statistical wear analysis of PA-6/UHMWPE alloy, UHMWPE and PA-6. WEAR, 249 (1-2). pp. 31-36.

Full text not available from this repository.

Abstract

This paper, based on an orthogonal experimental design and analysis method, reports the wear of a blend of polyamide-6/ultrahigh molecular weight polyethylene (PA-6/UHMWPE), using a pin-on-disc test, and rubbing against a stainless steel counterface. The wear behavior of PA-6 and UHMWPE was also investigated for the purpose of comparison. The main purpose was to study the influence of the parameters: sliding distance, contact pressure and sliding speed on the wear performance of the investigated materials. Statistical analysis was carried out to develop an equation in which the wear volume of the specimen was expressed in terms of sliding distance, contact pressure and sliding speed. It was observed that the wear rate was lower for PA-6 than the other two materials. UHMWPE exhibited the lowest wear resistance. Contact pressure was found to be the most important factor in the wear of materials, followed by sliding distance and sliding speed. Sliding distance had the highest relative ef

Item Type: Article
Journal or Publication Title: WEAR
Uncontrolled Keywords: Wear ; Ultrahigh molecular weight polyethylene ; Polyamide ; Alloy
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Departments: Faculty of Science and Technology > Engineering
ID Code: 57846
Deposited By: ep_importer_pure
Deposited On: 16 Oct 2012 14:08
Refereed?: Yes
Published?: Published
Last Modified: 24 Jan 2014 05:31
Identification Number:
URI: http://eprints.lancs.ac.uk/id/eprint/57846

Actions (login required)

View Item